Ejemplos de RMAT_COPY en C++ (Cpp)

Ejemplo n.º 1

Archivo: ahrs_int_cmpl_quat.c Proyecto: ERAUBB/paparazzi

void ahrs_init(void) {

  ahrs.status = AHRS_UNINIT;
  ahrs_impl.ltp_vel_norm_valid = FALSE;
  ahrs_impl.heading_aligned = FALSE;

  /* set ltp_to_body to zero */
  INT_EULERS_ZERO(ahrs.ltp_to_body_euler);
  INT32_QUAT_ZERO(ahrs.ltp_to_body_quat);
  INT32_RMAT_ZERO(ahrs.ltp_to_body_rmat);
  INT_RATES_ZERO(ahrs.body_rate);

  /* set ltp_to_imu so that body is zero */
  QUAT_COPY(ahrs.ltp_to_imu_quat, imu.body_to_imu_quat);
  RMAT_COPY(ahrs.ltp_to_imu_rmat, imu.body_to_imu_rmat);
  INT32_EULERS_OF_RMAT(ahrs.ltp_to_imu_euler, ahrs.ltp_to_imu_rmat);
  INT_RATES_ZERO(ahrs.imu_rate);

  INT_RATES_ZERO(ahrs_impl.gyro_bias);
  INT_RATES_ZERO(ahrs_impl.rate_correction);
  INT_RATES_ZERO(ahrs_impl.high_rez_bias);

#if AHRS_GRAVITY_UPDATE_COORDINATED_TURN
  ahrs_impl.correct_gravity = TRUE;
#else
  ahrs_impl.correct_gravity = FALSE;
#endif

#if AHRS_GRAVITY_UPDATE_NORM_HEURISTIC
  ahrs_impl.use_gravity_heuristic = TRUE;
#else
  ahrs_impl.use_gravity_heuristic = FALSE;
#endif

}

Ejemplo n.º 2

Archivo: ahrs_float_dcm.c Proyecto: maxcht/paparazzi

void ahrs_init(void) {
  ahrs_float.status = AHRS_UNINIT;

  /*
   * Initialises our IMU alignement variables
   * This should probably done in the IMU code instead
   */
  struct FloatEulers body_to_imu_euler =
    {IMU_BODY_TO_IMU_PHI, IMU_BODY_TO_IMU_THETA, IMU_BODY_TO_IMU_PSI};
  FLOAT_QUAT_OF_EULERS(ahrs_impl.body_to_imu_quat, body_to_imu_euler);
  FLOAT_RMAT_OF_EULERS(ahrs_impl.body_to_imu_rmat, body_to_imu_euler);

  /* set ltp_to_body to zero */
  FLOAT_QUAT_ZERO(ahrs_float.ltp_to_body_quat);
  FLOAT_EULERS_ZERO(ahrs_float.ltp_to_body_euler);
  FLOAT_RMAT_ZERO(ahrs_float.ltp_to_body_rmat);
  FLOAT_RATES_ZERO(ahrs_float.body_rate);

  /* set ltp_to_imu so that body is zero */
  QUAT_COPY(ahrs_float.ltp_to_imu_quat, ahrs_impl.body_to_imu_quat);
  RMAT_COPY(ahrs_float.ltp_to_imu_rmat, ahrs_impl.body_to_imu_rmat);
  EULERS_COPY(ahrs_float.ltp_to_imu_euler, body_to_imu_euler);
  FLOAT_RATES_ZERO(ahrs_float.imu_rate);

  /* set inital filter dcm */
  set_dcm_matrix_from_rmat(&ahrs_float.ltp_to_imu_rmat);
}

Ejemplo n.º 3

Archivo: ahrs_float_cmpl.c Proyecto: scdwyer/paparazzi

void ahrs_init(void) {
    ahrs.status = AHRS_UNINIT;
    ahrs_impl.ltp_vel_norm_valid = FALSE;
    ahrs_impl.heading_aligned = FALSE;

    /* Initialises IMU alignement */
    struct FloatEulers body_to_imu_euler =
    {IMU_BODY_TO_IMU_PHI, IMU_BODY_TO_IMU_THETA, IMU_BODY_TO_IMU_PSI};
    FLOAT_QUAT_OF_EULERS(ahrs_impl.body_to_imu_quat, body_to_imu_euler);
    FLOAT_RMAT_OF_EULERS(ahrs_impl.body_to_imu_rmat, body_to_imu_euler);

    /* Set ltp_to_imu so that body is zero */
    QUAT_COPY(ahrs_impl.ltp_to_imu_quat, ahrs_impl.body_to_imu_quat);
    RMAT_COPY(ahrs_impl.ltp_to_imu_rmat, ahrs_impl.body_to_imu_rmat);

    FLOAT_RATES_ZERO(ahrs_impl.imu_rate);

#if AHRS_GRAVITY_UPDATE_COORDINATED_TURN
    ahrs_impl.correct_gravity = TRUE;
#else
    ahrs_impl.correct_gravity = FALSE;
#endif

    VECT3_ASSIGN(ahrs_impl.mag_h, AHRS_H_X, AHRS_H_Y, AHRS_H_Z);
}

Ejemplo n.º 4

Archivo: ahrs_sim.c Proyecto: Ludo6431/paparazzi

/*
 * Compute body orientation and rates from imu orientation and rates
 */
void compute_body_orientation_and_rates(void) {

  /* set ltp_to_body to same as ltp_to_imu, currently no difference simulated */

  QUAT_COPY(ahrs_float.ltp_to_body_quat, ahrs_float.ltp_to_imu_quat);
  EULERS_COPY(ahrs_float.ltp_to_body_euler, ahrs_float.ltp_to_imu_euler);
  RMAT_COPY(ahrs_float.ltp_to_body_rmat, ahrs_float.ltp_to_imu_rmat);
  RATES_COPY(ahrs_float.body_rate, ahrs_float.imu_rate);
}

Ejemplo n.º 5

Archivo: ahrs_sim.c Proyecto: Ludo6431/paparazzi

void ahrs_init(void) {
  //ahrs_float.status = AHRS_UNINIT;
  // set to running for now and only use ahrs.status, not ahrs_float.status
  ahrs.status = AHRS_RUNNING;

  ahrs_sim_available = FALSE;

  /* set ltp_to_body to zero */
  FLOAT_QUAT_ZERO(ahrs_float.ltp_to_body_quat);
  FLOAT_EULERS_ZERO(ahrs_float.ltp_to_body_euler);
  FLOAT_RMAT_ZERO(ahrs_float.ltp_to_body_rmat);
  FLOAT_RATES_ZERO(ahrs_float.body_rate);

  /* set ltp_to_imu to same as ltp_to_body, currently no difference simulated */
  QUAT_COPY(ahrs_float.ltp_to_imu_quat, ahrs_float.ltp_to_body_quat);
  EULERS_COPY(ahrs_float.ltp_to_imu_euler, ahrs_float.ltp_to_body_euler);
  RMAT_COPY(ahrs_float.ltp_to_imu_rmat, ahrs_float.ltp_to_body_rmat);
  RATES_COPY(ahrs_float.imu_rate, ahrs_float.body_rate);
}

Ejemplo n.º 6

Archivo: ahrs_float_cmpl.c Proyecto: 1bitsquared/paparazzi

void ahrs_init(void) {
  ahrs.status = AHRS_UNINIT;
  ahrs_impl.ltp_vel_norm_valid = FALSE;
  ahrs_impl.heading_aligned = FALSE;

  /* Initialises IMU alignement */
  struct FloatEulers body_to_imu_euler =
    {IMU_BODY_TO_IMU_PHI, IMU_BODY_TO_IMU_THETA, IMU_BODY_TO_IMU_PSI};
  FLOAT_QUAT_OF_EULERS(ahrs_impl.body_to_imu_quat, body_to_imu_euler);
  FLOAT_RMAT_OF_EULERS(ahrs_impl.body_to_imu_rmat, body_to_imu_euler);

  /* Set ltp_to_imu so that body is zero */
  QUAT_COPY(ahrs_impl.ltp_to_imu_quat, ahrs_impl.body_to_imu_quat);
  RMAT_COPY(ahrs_impl.ltp_to_imu_rmat, ahrs_impl.body_to_imu_rmat);

  FLOAT_RATES_ZERO(ahrs_impl.imu_rate);

  /* set default filter cut-off frequency and damping */
  ahrs_impl.accel_omega = AHRS_ACCEL_OMEGA;
  ahrs_impl.accel_zeta = AHRS_ACCEL_ZETA;
  ahrs_impl.mag_omega = AHRS_MAG_OMEGA;
  ahrs_impl.mag_zeta = AHRS_MAG_ZETA;

#if AHRS_GRAVITY_UPDATE_COORDINATED_TURN
  ahrs_impl.correct_gravity = TRUE;
#else
  ahrs_impl.correct_gravity = FALSE;
#endif

  ahrs_impl.gravity_heuristic_factor = AHRS_GRAVITY_HEURISTIC_FACTOR;

  VECT3_ASSIGN(ahrs_impl.mag_h, AHRS_H_X, AHRS_H_Y, AHRS_H_Z);

#if PERIODIC_TELEMETRY
  register_periodic_telemetry(DefaultPeriodic, "AHRS_EULER_INT", send_att);
  register_periodic_telemetry(DefaultPeriodic, "GEO_MAG", send_geo_mag);
#endif
}

Ejemplo n.º 7

void ahrs_init(void) {
    ahrs.status = AHRS_UNINIT;

    /*
     * Initialises our IMU alignement variables
     * This should probably done in the IMU code instead
     */
    struct FloatEulers body_to_imu_euler =
    {IMU_BODY_TO_IMU_PHI, IMU_BODY_TO_IMU_THETA, IMU_BODY_TO_IMU_PSI};
    FLOAT_QUAT_OF_EULERS(ahrs_impl.body_to_imu_quat, body_to_imu_euler);
    FLOAT_RMAT_OF_EULERS(ahrs_impl.body_to_imu_rmat, body_to_imu_euler);

    /* set ltp_to_body to zero */
    FLOAT_QUAT_ZERO(ahrs_float.ltp_to_body_quat);
    FLOAT_EULERS_ZERO(ahrs_float.ltp_to_body_euler);
    FLOAT_RMAT_ZERO(ahrs_float.ltp_to_body_rmat);
    FLOAT_RATES_ZERO(ahrs_float.body_rate);

    /* set ltp_to_imu so that body is zero */
    QUAT_COPY(ahrs_float.ltp_to_imu_quat, ahrs_impl.body_to_imu_quat);
    RMAT_COPY(ahrs_float.ltp_to_imu_rmat, ahrs_impl.body_to_imu_rmat);
    EULERS_COPY(ahrs_float.ltp_to_imu_euler, body_to_imu_euler);
    FLOAT_RATES_ZERO(ahrs_float.imu_rate);

    /* set inital filter dcm */
    set_dcm_matrix_from_rmat(&ahrs_float.ltp_to_imu_rmat);

#if USE_HIGH_ACCEL_FLAG
    high_accel_done = FALSE;
    high_accel_flag = FALSE;
#endif

    ahrs_impl.gps_speed = 0;
    ahrs_impl.gps_acceleration = 0;
    ahrs_impl.gps_course = 0;
    ahrs_impl.gps_course_valid = FALSE;
    ahrs_impl.gps_age = 100;
}

Ejemplo n.º 8

Archivo: ahrs_float_cmpl_rmat.c Proyecto: Ludo6431/paparazzi

void ahrs_init(void) {
  ahrs.status = AHRS_UNINIT;

  /* Initialises IMU alignement */
  struct FloatEulers body_to_imu_euler =
    {IMU_BODY_TO_IMU_PHI, IMU_BODY_TO_IMU_THETA, IMU_BODY_TO_IMU_PSI};
  FLOAT_QUAT_OF_EULERS(ahrs_impl.body_to_imu_quat, body_to_imu_euler);
  FLOAT_RMAT_OF_EULERS(ahrs_impl.body_to_imu_rmat, body_to_imu_euler);

  /* Set ltp_to_body to zero */
  FLOAT_QUAT_ZERO(ahrs_float.ltp_to_body_quat);
  FLOAT_EULERS_ZERO(ahrs_float.ltp_to_body_euler);
  FLOAT_RMAT_ZERO(ahrs_float.ltp_to_body_rmat);
  FLOAT_RATES_ZERO(ahrs_float.body_rate);

  /* Set ltp_to_imu so that body is zero */
  QUAT_COPY(ahrs_float.ltp_to_imu_quat, ahrs_impl.body_to_imu_quat);
  RMAT_COPY(ahrs_float.ltp_to_imu_rmat, ahrs_impl.body_to_imu_rmat);
  EULERS_COPY(ahrs_float.ltp_to_imu_euler, body_to_imu_euler);

  FLOAT_RATES_ZERO(ahrs_float.imu_rate);

}

Ejemplo n.º 9

Archivo: ahrs_int_cmpl_euler.c Proyecto: Paolo-Maffei/lxyppc-tetrix

void ahrs_init(void) {
  ahrs.status = AHRS_UNINIT;

  /* set ltp_to_body to zero */
  INT_EULERS_ZERO(ahrs.ltp_to_body_euler);
  INT32_QUAT_ZERO(ahrs.ltp_to_body_quat);
  INT32_RMAT_ZERO(ahrs.ltp_to_body_rmat);
  INT_RATES_ZERO(ahrs.body_rate);

  /* set ltp_to_imu so that body is zero */
  QUAT_COPY(ahrs.ltp_to_imu_quat, imu.body_to_imu_quat);
  RMAT_COPY(ahrs.ltp_to_imu_rmat, imu.body_to_imu_rmat);
  INT32_EULERS_OF_RMAT(ahrs.ltp_to_imu_euler, ahrs.ltp_to_imu_rmat);
  INT_RATES_ZERO(ahrs.imu_rate);

  INT_RATES_ZERO(ahrs_impl.gyro_bias);
  ahrs_impl.reinj_1 = FACE_REINJ_1;

#ifdef IMU_MAG_OFFSET
  ahrs_mag_offset = IMU_MAG_OFFSET;
#else
  ahrs_mag_offset = 0.;
#endif
}