/**
* Initialization for EMAC device.
* Should be called at the beginning of the program to set up the
* network interface.
*/
void tapdev_init(void)
{
sEmacd *pEmacd = &gEmacd;
Macb *pMacb = &gMacb;
uint32_t dwErrCount = 0 ;
volatile uint32_t dwDly;
/* Reset PHY */
RSTC_SetExtResetLength(RSTC, 13); /* (2^(13+1))/32768 */
RSTC_ExtReset(RSTC);
while(RSTC_GetNrstLevel(RSTC) == 0) {}
/* Wait for PHY to be ready (CAT811: Max400ms) */
dwDly = BOARD_MCK / 1000 / 3 * 400;
while(dwDly--);
/* Init EMAC driver structure */
EMACD_Init(pEmacd, EMAC, ID_EMAC, 0, 0);
EMACD_InitTransfer(pEmacd,
gpRxBuffer, gRxDs, RX_BUFFERS,
gpTxBuffer, gTxDs, gTxCbs, TX_BUFFERS);
EMAC_SetAddress(gEmacd.pHw, 0, gMacAddress);
/* Enable Interrupt */
NVIC_EnableIRQ( EMAC_IRQn ) ;
/* Init MACB driver */
MACB_Init(pMacb, pEmacd, BOARD_EMAC_PHY_ADDR);
/* PHY initialize */
if (!MACB_InitPhy(pMacb, BOARD_MCK,
gEmacPins, PIO_LISTSIZE(gEmacPins)))
{
printf( "P: PHY Initialize ERROR!\n\r" ) ;
return;
}
/* Auto Negotiate, work in RMII mode */
if (!MACB_AutoNegotiate(pMacb, BOARD_EMAC_MODE_RMII))
{
printf( "P: Auto Negotiate ERROR!\n\r" ) ;
return;
}
while ( MACB_GetLinkSpeed( pMacb, 1 ) == 0 )
{
dwErrCount++;
}
printf( "P: Link detected \n\r" ) ;
}
//------------------------------------------------------------------------------
/// Application entry point. Configures the DBGU, PIT, TC0, LEDs and buttons
/// and makes LED\#1 blink in its infinite loop, using the Wait function.
/// \return Unused (ANSI-C compatibility).
//------------------------------------------------------------------------------
int main(void)
{
// DBGU configuration
TRACE_CONFIGURE(DBGU_STANDARD, 115200, BOARD_MCK);
TRACE_INFO_WP("\n\r");
TRACE_INFO("Getting new Started Project --\n\r");
TRACE_INFO("%s\n\r", BOARD_NAME);
TRACE_INFO("Compiled: %s %s --\n\r", __DATE__, __TIME__);
//Configure Reset Controller
AT91C_BASE_RSTC->RSTC_RMR= 0xa5<<24;
// Configure EMAC PINS
PIO_Configure(emacRstPins, PIO_LISTSIZE(emacRstPins));
// Execute reset
RSTC_SetExtResetLength(0xd);
RSTC_ExtReset();
// Wait for end hardware reset
while (!RSTC_GetNrstLevel());
TRACE_INFO("init Flash\n\r");
flash_init();
TRACE_INFO("init Timer\n\r");
// Configure timer 0
ticks=0;
extern void ISR_Timer0();
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0);
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
AT91C_BASE_TC0->TC_IDR = 0xFFFFFFFF;
AT91C_BASE_TC0->TC_SR;
AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV5_CLOCK | AT91C_TC_CPCTRG;
AT91C_BASE_TC0->TC_RC = 375;
AT91C_BASE_TC0->TC_IER = AT91C_TC_CPCS;
AIC_ConfigureIT(AT91C_ID_TC0, AT91C_AIC_PRIOR_LOWEST, ISR_Timer0);
AIC_EnableIT(AT91C_ID_TC0);
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
// Configure timer 1
extern void ISR_Timer1();
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; //Stop clock
AT91C_BASE_TC1->TC_IDR = 0xFFFFFFFF; //Disable Interrupts
AT91C_BASE_TC1->TC_SR; //Read Status register
AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV4_CLOCK | AT91C_TC_CPCTRG; // Timer1: 2,666us = 48MHz/128
AT91C_BASE_TC1->TC_RC = 0xffff;
AT91C_BASE_TC1->TC_IER = AT91C_TC_CPCS;
AIC_ConfigureIT(AT91C_ID_TC1, 1, ISR_Timer1);
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
led_init();
TRACE_INFO("init EEprom\n\r");
eeprom_init();
rb_reset(&TTY_Rx_Buffer);
rb_reset(&TTY_Tx_Buffer);
input_handle_func = analyze_ttydata;
LED_OFF();
LED2_OFF();
LED3_OFF();
spi_init();
fht_init();
tx_init();
#ifdef HAS_ETHERNET
ethernet_init();
#endif
TRACE_INFO("init USB\n\r");
CDCDSerialDriver_Initialize();
USBD_Connect();
wdt_enable(WDTO_2S);
fastrf_on=0;
display_channel = DISPLAY_USB;
TRACE_INFO("init Complete\n\r");
checkFrequency();
// Main loop
while (1) {
CDC_Task();
Minute_Task();
RfAnalyze_Task();
#ifdef HAS_FASTRF
FastRF_Task();
#endif
#ifdef HAS_RF_ROUTER
rf_router_task();
#endif
#ifdef HAS_ASKSIN
rf_asksin_task();
#endif
#ifdef HAS_MORITZ
rf_moritz_task();
#endif
#ifdef HAS_RWE
rf_rwe_task();
#endif
#ifdef HAS_MBUS
rf_mbus_task();
#endif
#ifdef HAS_MAICO
rf_maico_task();
#endif
#ifdef HAS_ETHERNET
Ethernet_Task();
#endif
#ifdef DBGU_UNIT_IN
if(DBGU_IsRxReady()){
unsigned char volatile * const ram = (unsigned char *) AT91C_ISRAM;
unsigned char x;
x=DBGU_GetChar();
switch(x) {
case 'd':
puts("USB disconnect\n\r");
USBD_Disconnect();
break;
case 'c':
USBD_Connect();
puts("USB Connect\n\r");
break;
case 'r':
//Configure Reset Controller
AT91C_BASE_RSTC->RSTC_RMR=AT91C_RSTC_URSTEN | 0xa5<<24;
break;
case 'S':
USBD_Disconnect();
my_delay_ms(250);
my_delay_ms(250);
//Reset
*ram = 0xaa;
AT91C_BASE_RSTC->RSTC_RCR = AT91C_RSTC_PROCRST | AT91C_RSTC_PERRST | AT91C_RSTC_EXTRST | 0xA5<<24;
while (1);
break;
default:
rb_put(&TTY_Tx_Buffer, x);
}
}
#endif
if (USBD_GetState() == USBD_STATE_CONFIGURED) {
if( USBState == STATE_IDLE ) {
CDCDSerialDriver_Read(usbBuffer,
DATABUFFERSIZE,
(TransferCallback) UsbDataReceived,
0);
LED3_ON();
USBState=STATE_RX;
}
}
if( USBState == STATE_SUSPEND ) {
TRACE_INFO("suspend !\n\r");
USBState = STATE_IDLE;
}
if( USBState == STATE_RESUME ) {
TRACE_INFO("resume !\n\r");
USBState = STATE_IDLE;
}
}
}
