#include <bsp/tms570-sci-driver.h>
#include <rtems/console.h>
#include <bsp.h>
#include <bsp/fatal.h>
#include <bsp/irq.h>
#define TMS570_SCI_BUFFER_SIZE 1
/**
* @brief Table including all serial drivers
*
* Definitions of all serial drivers
*/
tms570_sci_context driver_context_table[] = {
{
.base = RTEMS_TERMIOS_DEVICE_CONTEXT_INITIALIZER("TMS570 SCI1"),
.device_name = "/dev/console",
/* TMS570 UART peripheral use subset of LIN registers which are equivalent
* to SCI ones
*/
.regs = (volatile tms570_sci_t *) &TMS570_LIN,
.irq = TMS570_IRQ_SCI_LEVEL_0,
},
{
.base = RTEMS_TERMIOS_DEVICE_CONTEXT_INITIALIZER("TMS570 SCI2"),
.device_name = "/dev/ttyS1",
.regs = &TMS570_SCI,
.irq = TMS570_IRQ_SCI2_LEVEL_0,
}
};
static bool lpc176x_uart3_probe(rtems_termios_device_context *ctx)
{
(void)ctx;
lpc176x_module_enable( LPC176X_MODULE_UART_3, LPC176X_MODULE_PCLK_DEFAULT );
lpc176x_pin_select( LPC176X_PIN_UART_3_TXD, LPC176X_PIN_FUNCTION_10 );
lpc176x_pin_select( LPC176X_PIN_UART_3_RXD, LPC176X_PIN_FUNCTION_10 );
return true;
}
#endif
#ifdef LPC176X_CONFIG_CONSOLE
static ns16550_context lpc176x_uart_context_0 = {
.base = RTEMS_TERMIOS_DEVICE_CONTEXT_INITIALIZER("UART 0"),
.get_reg = lpc176x_uart_get_register,
.set_reg = lpc176x_uart_set_register,
.port = UART0_BASE_ADDR,
.irq = LPC176X_IRQ_UART_0,
.clock = LPC176X_PCLK,
.initial_baud = LPC176X_UART_BAUD,
.has_fractional_divider_register = true
};
#endif
#ifdef LPC176X_CONFIG_UART_1
static ns16550_context lpc176x_uart_context_1 = {
.base = RTEMS_TERMIOS_DEVICE_CONTEXT_INITIALIZER("UART 1"),
.get_reg = lpc176x_uart_get_register,
.set_reg = lpc176x_uart_set_register,
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <rtems/serial_mouse.h>
#include <rtems/bspIo.h>
#include <bsp.h>
#include <bsp/irq.h>
#include <bsp/arm-pl011.h>
#include <bsp/arm-pl050.h>
#include <bsp/console-termios.h>
static arm_pl011_context pl011_context = {
.base = RTEMS_TERMIOS_DEVICE_CONTEXT_INITIALIZER("PL011"),
.regs = (volatile pl011 *) 0x10009000,
.irq = RVPBXA9_IRQ_UART_0,
.initial_baud = 115200
};
static arm_pl050_context pl050_context = {
.base = RTEMS_TERMIOS_DEVICE_CONTEXT_INITIALIZER("PL050"),
.regs = (volatile pl050 *) 0x10007000,
.irq = RVPBXA9_IRQ_KMI1,
.initial_baud = 115200
};
static void output_char(char c)
{
arm_pl011_write_polled(&pl011_context.base, c);