int mt76u_vendor_request(struct rtmp_adapter *pAd, u8 requesttype, enum mt_vendor_req request,
u16 value, u16 index, void *data, u16 size)
{
int ret = 0;
struct usb_device *udev = mt7610u_to_usb_dev(pAd);
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) {
DBGPRINT(RT_DEBUG_ERROR, ("WIFI device has been disconnected\n"));
return NDIS_STATUS_FAILURE;
} else if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_MCU_SLEEP)) {
DBGPRINT(RT_DEBUG_ERROR, ("MCU has entered sleep mode\n"));
return NDIS_STATUS_FAILURE;
} else {
int RetryCount = 0; /* RTUSB_CONTROL_MSG retry counts*/
ret = down_interruptible(&(pAd->UsbVendorReq_semaphore));
if (ret != 0) {
DBGPRINT(RT_DEBUG_ERROR, ("UsbVendorReq_semaphore get failed\n"));
return NDIS_STATUS_FAILURE;
}
if ((size > 0) && (requesttype == DEVICE_VENDOR_REQUEST_OUT))
memmove(pAd->vend_buf, data, size);
do {
unsigned int pipe = (requesttype == DEVICE_VENDOR_REQUEST_OUT) ?
usb_sndctrlpipe(udev, 0) :
usb_rcvctrlpipe(udev, 0);
ret = usb_control_msg(udev,
pipe,
request,
requesttype,
value,
index,
pAd->vend_buf,
size,
CONTROL_TIMEOUT_JIFFIES);
if (ret < 0 ) {
DBGPRINT(RT_DEBUG_OFF, ("#\n"));
if (ret == -ENODEV) {
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
}
RetryCount++;
mdelay(5); /* wait for 5ms*/
}
} while((ret < 0 ) && (RetryCount < MAX_VENDOR_REQ_RETRY_COUNT));
if (ret >= 0 && size > 0 && requesttype == DEVICE_VENDOR_REQUEST_IN)
memmove(data, pAd->vend_buf, size);
up(&(pAd->UsbVendorReq_semaphore));
if (ret < 0) {
DBGPRINT(RT_DEBUG_ERROR, ("mt76u_vendor_request failed(%d), ReqType=%s, Req=0x%x, Idx=0x%x,pAd->Flags=0x%lx\n",
ret, (requesttype == DEVICE_VENDOR_REQUEST_OUT ? "OUT" : "IN"), request, index, pAd->Flags));
if (request == MT_VEND_SINGLE_WRITE)
DBGPRINT(RT_DEBUG_ERROR, ("\tRequest Value=0x%04x!\n", value));
if (ret == -ENODEV)
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
}
}
if (ret < 0)
return NDIS_STATUS_FAILURE;
else
return NDIS_STATUS_SUCCESS;
}
/*
========================================================================
Routine Description:
RTUSB_VendorRequest - Builds a ralink specific request, sends it off to USB endpoint zero and waits for completion
Arguments:
@pAd:
@TransferFlags:
@RequestType: USB message request type value
@Request: USB message request value
@Value: USB message value
@Index: USB message index value
@TransferBuffer: USB data to be sent
@TransferBufferLength: Lengths in bytes of the data to be sent
Context: ! in atomic context
Return Value:
NDIS_STATUS_SUCCESS
NDIS_STATUS_FAILURE
Note:
This function sends a simple control message to endpoint zero
and waits for the message to complete, or CONTROL_TIMEOUT_JIFFIES timeout.
Because it is synchronous transfer, so don't use this function within an atomic context,
otherwise system will hang, do be careful.
TransferBuffer may located in stack region which may not in DMA'able region in some embedded platforms,
so need to copy TransferBuffer to UsbVendorReqBuf allocated by kmalloc to do DMA transfer.
Use UsbVendorReq_semaphore to protect this region which may be accessed by multi task.
Normally, coherent issue is resloved by low-level HC driver, so do not flush this zone by RTUSB_VendorRequest.
========================================================================
*/
NTSTATUS RTUSB_VendorRequest(
IN PRTMP_ADAPTER pAd,
IN UINT32 TransferFlags,
IN UCHAR RequestType,
IN UCHAR Request,
IN USHORT Value,
IN USHORT Index,
IN PVOID TransferBuffer,
IN UINT32 TransferBufferLength)
{
int RET = 0;
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
if(in_interrupt())
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("BUG: RTUSB_VendorRequest is called from invalid context\n"));
return NDIS_STATUS_FAILURE;
}
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
{
/*MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("WIFI device has been disconnected\n"));*/
return NDIS_STATUS_FAILURE;
}
else if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_MCU_SLEEP))
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("MCU has entered sleep mode\n"));
return NDIS_STATUS_FAILURE;
}
else
{
int RetryCount = 0; /* RTUSB_CONTROL_MSG retry counts*/
ASSERT(TransferBufferLength <MAX_PARAM_BUFFER_SIZE);
RTMP_SEM_EVENT_WAIT(&(pAd->UsbVendorReq_semaphore), RET);
if (RET != 0)
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("UsbVendorReq_semaphore get failed! (%d)\n",RET));
return NDIS_STATUS_FAILURE;
}
if ((TransferBufferLength > 0) && ((RequestType == DEVICE_VENDOR_REQUEST_OUT) || (RequestType == DEVICE_CLASS_REQUEST_OUT)))
NdisMoveMemory(pAd->UsbVendorReqBuf, TransferBuffer, TransferBufferLength);
do {
RTUSB_CONTROL_MSG(pObj->pUsb_Dev, 0, Request, RequestType, Value,
Index, pAd->UsbVendorReqBuf, TransferBufferLength,
CONTROL_TIMEOUT_JIFFIES, RET);
if (RET < 0) {
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_OFF, ("#\n"));
if (RET == RTMP_USB_CONTROL_MSG_ENODEV)
{
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
}
RetryCount++;
RtmpusecDelay(5000); /* wait for 5ms*/
}
} while((RET < 0) && (RetryCount < MAX_VENDOR_REQ_RETRY_COUNT));
if ( (!(RET < 0)) && (TransferBufferLength > 0) && (RequestType == DEVICE_VENDOR_REQUEST_IN))
NdisMoveMemory(TransferBuffer, pAd->UsbVendorReqBuf, TransferBufferLength);
RTMP_SEM_EVENT_UP(&(pAd->UsbVendorReq_semaphore));
if (RET < 0) {
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("RTUSB_VendorRequest failed(%d),TxFlags=0x%x, ReqType=%s, Req=0x%x, Idx=0x%x,pAd->Flags=0x%lx\n",
RET, TransferFlags, (RequestType == DEVICE_VENDOR_REQUEST_OUT ? "OUT" : "IN"), Request, Index, pAd->Flags));
if (Request == 0x2)
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("\tRequest Value=0x%04x!\n", Value));
if ((!TransferBuffer) && (TransferBufferLength > 0))
hex_dump("Failed TransferBuffer value", TransferBuffer, TransferBufferLength);
if (RET == RTMP_USB_CONTROL_MSG_ENODEV)
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
}
}
if (RET < 0)
return NDIS_STATUS_FAILURE;
else
return NDIS_STATUS_SUCCESS;
}
/*
========================================================================
Routine Description:
Arguments:
Max : limit Host PCI and Ralink PCIe device's LINK CONTROL field's value.
Because now frequently set our device to mode 1 or mode 3 will cause problem.
========================================================================
*/
VOID RTMPPCIeLinkCtrlSetting(
IN PRTMP_ADAPTER pAd,
IN USHORT Max)
{
USHORT PCIePowerSaveLevel, reg16;
USHORT Configuration;
POS_COOKIE pObj;
pObj = (POS_COOKIE) pAd->OS_Cookie;
if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
return;
// Check PSControl Configuration
if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE)
return;
// Check interface : If not PCIe interface, return.
//Block 3090 to enter the following function
#ifdef RT2860
if (!((pObj->DeviceID == NIC2860_PCIe_DEVICE_ID)
||(pObj->DeviceID == NIC2790_PCIe_DEVICE_ID)))
return;
#endif // RT2860 //
if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP))
{
DBGPRINT(RT_DEBUG_INFO, ("RTMPPCIePowerLinkCtrl return on fRTMP_PS_CAN_GO_SLEEP flag\n"));
return;
}
DBGPRINT(RT_DEBUG_TRACE,("%s===>\n", __FUNCTION__));
PCIePowerSaveLevel = pAd->PCIePowerSaveLevel;
if ((PCIePowerSaveLevel&0xff) == 0xff)
{
DBGPRINT(RT_DEBUG_TRACE,("return \n"));
return;
}
PCIePowerSaveLevel = PCIePowerSaveLevel>>6;
// Skip non-exist deice right away
if (pObj->parent_pci_dev && (pAd->HostLnkCtrlOffset != 0))
{
PCI_REG_READ_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, Configuration);
switch (PCIePowerSaveLevel)
{
case 0:
// Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00
Configuration &= 0xfefc;
break;
case 1:
// Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01
Configuration &= 0xfefc;
Configuration |= 0x1;
break;
case 2:
// Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11
Configuration &= 0xfefc;
Configuration |= 0x3;
break;
case 3:
// Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1
Configuration &= 0xfefc;
Configuration |= 0x103;
break;
}
PCI_REG_WIRTE_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, Configuration);
DBGPRINT(RT_DEBUG_TRACE, ("Write PCI host offset 0x%x = 0x%x\n", pAd->HostLnkCtrlOffset, Configuration));
}
if (pObj->pci_dev && (pAd->RLnkCtrlOffset != 0))
{
// first 2892 chip not allow to frequently set mode 3. will cause hang problem.
if (PCIePowerSaveLevel > Max)
PCIePowerSaveLevel = Max;
PCI_REG_READ_WORD(pObj->pci_dev, pAd->RLnkCtrlOffset, Configuration);
Configuration |= 0x100;
PCI_REG_WIRTE_WORD(pObj->pci_dev, pAd->RLnkCtrlOffset, Configuration);
DBGPRINT(RT_DEBUG_TRACE, ("Write Ralink device : offset 0x%x = 0x%x\n", pAd->RLnkCtrlOffset, Configuration));
}
DBGPRINT(RT_DEBUG_TRACE,("RTMPPCIePowerLinkCtrl <==============\n"));
}
