Ejemplo n.º 1
0
bool CmdExtract::ExtractCurrentFile(CommandData *Cmd,Archive &Arc,size_t HeaderSize,bool &Repeat)
{
  wchar Command=Cmd->Command[0];
  if (HeaderSize==0)
    if (DataIO.UnpVolume)
    {
#ifdef NOVOLUME
      return false;
#else
      if (!MergeArchive(Arc,&DataIO,false,Command))
      {
        ErrHandler.SetErrorCode(RARX_WARNING);
        return false;
      }
#endif
    }
    else
      return false;
  HEADER_TYPE HeaderType=Arc.GetHeaderType();
  if (HeaderType!=HEAD_FILE)
  {
#ifndef SFX_MODULE
    if (HeaderType==HEAD3_OLDSERVICE && PrevExtracted)
      SetExtraInfo20(Cmd,Arc,DestFileName);
#endif
    if (HeaderType==HEAD_SERVICE && PrevExtracted)
      SetExtraInfo(Cmd,Arc,DestFileName);
    if (HeaderType==HEAD_ENDARC)
      if (Arc.EndArcHead.NextVolume)
      {
#ifndef NOVOLUME
        if (!MergeArchive(Arc,&DataIO,false,Command))
        {
          ErrHandler.SetErrorCode(RARX_WARNING);
          return false;
        }
#endif
        Arc.Seek(Arc.CurBlockPos,SEEK_SET);
        return true;
      }
      else
        return false;
    Arc.SeekToNext();
    return true;
  }
  PrevExtracted=false;

  if (!Cmd->Recurse && MatchedArgs>=Cmd->FileArgs.ItemsCount() && AllMatchesExact)
    return false;

  int MatchType=MATCH_WILDSUBPATH;

  bool EqualNames=false;
  int MatchNumber=Cmd->IsProcessFile(Arc.FileHead,&EqualNames,MatchType);
  bool ExactMatch=MatchNumber!=0;
#ifndef SFX_MODULE
  if (Cmd->ExclPath==EXCL_BASEPATH)
  {
    *Cmd->ArcPath=0;
    if (ExactMatch)
    {
      Cmd->FileArgs.Rewind();
      if (Cmd->FileArgs.GetString(Cmd->ArcPath,ASIZE(Cmd->ArcPath),MatchNumber-1))
        *PointToName(Cmd->ArcPath)=0;
    }
  }
#endif
  if (ExactMatch && !EqualNames)
    AllMatchesExact=false;

  Arc.ConvertAttributes();

#if !defined(SFX_MODULE) && !defined(RARDLL)
  if (Arc.FileHead.SplitBefore && FirstFile)
  {
    wchar CurVolName[NM];
    wcsncpyz(CurVolName,ArcName,ASIZE(CurVolName));
    VolNameToFirstName(ArcName,ArcName,Arc.NewNumbering);

    if (wcsicomp(ArcName,CurVolName)!=0 && FileExist(ArcName))
    {
      // If first volume name does not match the current name and if such
      // volume name really exists, let's unpack from this first volume.
      Repeat=true;
      return false;
    }
#ifndef RARDLL
    if (!ReconstructDone)
    {
      ReconstructDone=true;

      if (RecVolumesRestore(Cmd,Arc.FileName,true))
      {
        Repeat=true;
        return false;
      }
    }
#endif
    wcsncpyz(ArcName,CurVolName,ASIZE(ArcName));
  }
#endif

  wchar ArcFileName[NM];
  ConvertPath(Arc.FileHead.FileName,ArcFileName);

  if (Arc.FileHead.Version)
  {
    if (Cmd->VersionControl!=1 && !EqualNames)
    {
      if (Cmd->VersionControl==0)
        ExactMatch=false;
      int Version=ParseVersionFileName(ArcFileName,false);
      if (Cmd->VersionControl-1==Version)
        ParseVersionFileName(ArcFileName,true);
      else
        ExactMatch=false;
    }
  }
  else
    if (!Arc.IsArcDir() && Cmd->VersionControl>1)
      ExactMatch=false;

  DataIO.UnpVolume=Arc.FileHead.SplitAfter;
  DataIO.NextVolumeMissing=false;

  Arc.Seek(Arc.NextBlockPos-Arc.FileHead.PackSize,SEEK_SET);

  bool ExtrFile=false;
  bool SkipSolid=false;

#ifndef SFX_MODULE
  if (FirstFile && (ExactMatch || Arc.Solid) && Arc.FileHead.SplitBefore)
  {
    if (ExactMatch)
    {
      Log(Arc.FileName,St(MUnpCannotMerge),ArcFileName);
#ifdef RARDLL
      Cmd->DllError=ERAR_BAD_DATA;
#endif
      ErrHandler.SetErrorCode(RARX_OPEN);
    }
    ExactMatch=false;
  }

  FirstFile=false;
#endif

  if (ExactMatch || (SkipSolid=Arc.Solid)!=0)
  {

    ExtrPrepareName(Cmd,Arc,ArcFileName,DestFileName,ASIZE(DestFileName));

    // DestFileName can be set empty in case of excessive -ap switch.
    ExtrFile=!SkipSolid && *DestFileName!=0 && !Arc.FileHead.SplitBefore;

    if ((Cmd->FreshFiles || Cmd->UpdateFiles) && (Command=='E' || Command=='X'))
    {
      FindData FD;
      if (FindFile::FastFind(DestFileName,&FD))
      {
        if (FD.mtime >= Arc.FileHead.mtime)
        {
          // If directory already exists and its modification time is newer 
          // than start of extraction, it is likely it was created 
          // when creating a path to one of already extracted items. 
          // In such case we'll better update its time even if archived 
          // directory is older.

          if (!FD.IsDir || FD.mtime<StartTime)
            ExtrFile=false;
        }
      }
      else
        if (Cmd->FreshFiles)
          ExtrFile=false;
    }

    if (Arc.FileHead.Encrypted)
    {
#ifdef RARDLL
      if (!ExtrDllGetPassword(Cmd))
        return false;
#else
      if (!ExtrGetPassword(Cmd,Arc,ArcFileName))
      {
        PasswordCancelled=true;
        return false;
      }
#endif
      // Skip only the current encrypted file if empty password is entered.
      if (!Password.IsSet())
      {
        ErrHandler.SetErrorCode(RARX_WARNING);
#ifdef RARDLL
        Cmd->DllError=ERAR_MISSING_PASSWORD;
#endif
        ExtrFile=false;
      }
    }

#ifdef RARDLL
    if (*Cmd->DllDestName!=0)
    {
      wcsncpyz(DestFileName,Cmd->DllDestName,ASIZE(DestFileName));

//      Do we need this code?
//      if (Cmd->DllOpMode!=RAR_EXTRACT)
//        ExtrFile=false;
    }
#endif

    if (!CheckUnpVer(Arc,ArcFileName))
    {
      ExtrFile=false;
      ErrHandler.SetErrorCode(RARX_WARNING);
#ifdef RARDLL
      Cmd->DllError=ERAR_UNKNOWN_FORMAT;
#endif
    }

    File CurFile;

    bool LinkEntry=Arc.FileHead.RedirType!=FSREDIR_NONE;
    if (LinkEntry && Arc.FileHead.RedirType!=FSREDIR_FILECOPY)
    {
      if (ExtrFile && Command!='P' && !Cmd->Test)
      {
        // Overwrite prompt for symbolic and hard links.
        bool UserReject=false;
        if (FileExist(DestFileName) && !UserReject)
          FileCreate(Cmd,NULL,DestFileName,ASIZE(DestFileName),Cmd->Overwrite,&UserReject,Arc.FileHead.UnpSize,&Arc.FileHead.mtime);
        if (UserReject)
          ExtrFile=false;
      }
    }
    else
      if (Arc.IsArcDir())
      {
        if (!ExtrFile || Command=='P' || Command=='I' || Command=='E' || Cmd->ExclPath==EXCL_SKIPWHOLEPATH)
          return true;
        TotalFileCount++;
        ExtrCreateDir(Cmd,Arc,ArcFileName);
        return true;
      }
      else
        if (ExtrFile) // Create files and file copies (FSREDIR_FILECOPY).
          ExtrFile=ExtrCreateFile(Cmd,Arc,CurFile);

    if (!ExtrFile && Arc.Solid)
    {
      SkipSolid=true;
      ExtrFile=true;

    }
    if (ExtrFile)
    {
      bool TestMode=Cmd->Test || SkipSolid; // Unpack to memory, not to disk.

      if (!SkipSolid)
      {
        if (!TestMode && Command!='P' && CurFile.IsDevice())
        {
          Log(Arc.FileName,St(MInvalidName),DestFileName);
          ErrHandler.WriteError(Arc.FileName,DestFileName);
        }
        TotalFileCount++;
      }
      FileCount++;
#ifndef GUI
      if (Command!='I')
        if (SkipSolid)
          mprintf(St(MExtrSkipFile),ArcFileName);
        else
          switch(Cmd->Test ? 'T':Command) // "Test" can be also enabled by -t switch.
          {
            case 'T':
              mprintf(St(MExtrTestFile),ArcFileName);
              break;
#ifndef SFX_MODULE
            case 'P':
              mprintf(St(MExtrPrinting),ArcFileName);
              break;
#endif
            case 'X':
            case 'E':
              mprintf(St(MExtrFile),DestFileName);
              break;
          }
      if (!Cmd->DisablePercentage)
        mprintf(L"     ");
#endif

      SecPassword FilePassword=Password;
#if defined(_WIN_ALL) && !defined(SFX_MODULE)
      ConvertDosPassword(Arc,FilePassword);
#endif

      byte PswCheck[SIZE_PSWCHECK];
      DataIO.SetEncryption(false,Arc.FileHead.CryptMethod,&FilePassword,
             Arc.FileHead.SaltSet ? Arc.FileHead.Salt:NULL,
             Arc.FileHead.InitV,Arc.FileHead.Lg2Count,
             PswCheck,Arc.FileHead.HashKey);
      bool WrongPassword=false;

      // If header is damaged, we cannot rely on password check value,
      // because it can be damaged too.
      if (Arc.FileHead.Encrypted && Arc.FileHead.UsePswCheck &&
          memcmp(Arc.FileHead.PswCheck,PswCheck,SIZE_PSWCHECK)!=0 &&
          !Arc.BrokenHeader)
      {
        Log(Arc.FileName,St(MWrongPassword));
        ErrHandler.SetErrorCode(RARX_BADPWD);
        WrongPassword=true;
      }
      DataIO.CurUnpRead=0;
      DataIO.CurUnpWrite=0;
      DataIO.UnpHash.Init(Arc.FileHead.FileHash.Type,Cmd->Threads);
      DataIO.PackedDataHash.Init(Arc.FileHead.FileHash.Type,Cmd->Threads);
      DataIO.SetPackedSizeToRead(Arc.FileHead.PackSize);
      DataIO.SetFiles(&Arc,&CurFile);
      DataIO.SetTestMode(TestMode);
      DataIO.SetSkipUnpCRC(SkipSolid);
      if (!TestMode && !WrongPassword && !Arc.BrokenHeader &&
          (Arc.FileHead.PackSize<<11)>Arc.FileHead.UnpSize &&
          (Arc.FileHead.UnpSize<100000000 || Arc.FileLength()>Arc.FileHead.PackSize))
        CurFile.Prealloc(Arc.FileHead.UnpSize);

      CurFile.SetAllowDelete(!Cmd->KeepBroken);

      bool FileCreateMode=!TestMode && !SkipSolid && Command!='P';
      bool ShowChecksum=true; // Display checksum verification result.

      bool LinkSuccess=true; // Assume success for test mode.
      if (LinkEntry)
      {
        FILE_SYSTEM_REDIRECT Type=Arc.FileHead.RedirType;

        if (Type==FSREDIR_HARDLINK || Type==FSREDIR_FILECOPY)
        {
          wchar NameExisting[NM];
          ExtrPrepareName(Cmd,Arc,Arc.FileHead.RedirName,NameExisting,ASIZE(NameExisting));
          if (FileCreateMode && *NameExisting!=0) // *NameExisting can be 0 in case of excessive -ap switch.
            if (Type==FSREDIR_HARDLINK)
              LinkSuccess=ExtractHardlink(DestFileName,NameExisting,ASIZE(NameExisting));
            else
              LinkSuccess=ExtractFileCopy(Cmd,CurFile,Arc.FileName,DestFileName,NameExisting,ASIZE(NameExisting));
        }
        else
          if (Type==FSREDIR_UNIXSYMLINK || Type==FSREDIR_WINSYMLINK || Type==FSREDIR_JUNCTION)
          {
            if (FileCreateMode)
              LinkSuccess=ExtractSymlink(Cmd,DataIO,Arc,DestFileName);
          }
          else
          {
#ifndef SFX_MODULE
            Log(Arc.FileName,St(MUnknownExtra),DestFileName);
#endif
            LinkSuccess=false;
          }
          
          if (!LinkSuccess || Arc.Format==RARFMT15 && !FileCreateMode)
          {
            // RAR 5.x links have a valid data checksum even in case of
            // failure, because they do not store any data.
            // We do not want to display "OK" in this case.
            // For 4.x symlinks we verify the checksum only when extracting,
            // but not when testing an archive.
            ShowChecksum=false;
          }
          PrevExtracted=FileCreateMode && LinkSuccess;
      }
      else
        if (!Arc.FileHead.SplitBefore && !WrongPassword)
          if (Arc.FileHead.Method==0)
            UnstoreFile(DataIO,Arc.FileHead.UnpSize);
          else
          {
            Unp->Init(Arc.FileHead.WinSize,Arc.FileHead.Solid);
            Unp->SetDestSize(Arc.FileHead.UnpSize);
#ifndef SFX_MODULE
            if (Arc.Format!=RARFMT50 && Arc.FileHead.UnpVer<=15)
              Unp->DoUnpack(15,FileCount>1 && Arc.Solid);
            else
#endif
              Unp->DoUnpack(Arc.FileHead.UnpVer,Arc.FileHead.Solid);
          }

      Arc.SeekToNext();

      bool ValidCRC=DataIO.UnpHash.Cmp(&Arc.FileHead.FileHash,Arc.FileHead.UseHashKey ? Arc.FileHead.HashKey:NULL);

      // We set AnySolidDataUnpackedWell to true if we found at least one
      // valid non-zero solid file in preceding solid stream. If it is true
      // and if current encrypted file is broken, we do not need to hint
      // about a wrong password and can report CRC error only.
      if (!Arc.FileHead.Solid)
        AnySolidDataUnpackedWell=false; // Reset the flag, because non-solid file is found.
      else
        if (Arc.FileHead.Method!=0 && Arc.FileHead.UnpSize>0 && ValidCRC)
          AnySolidDataUnpackedWell=true;
 
      bool BrokenFile=false;
      
      // Checksum is not calculated in skip solid mode for performance reason.
      if (!SkipSolid && ShowChecksum)
      {
        if (!WrongPassword && ValidCRC)
        {
#ifndef GUI
          if (Command!='P' && Command!='I')
            mprintf(L"%s%s ",Cmd->DisablePercentage ? L" ":L"\b\b\b\b\b ",
              Arc.FileHead.FileHash.Type==HASH_NONE ? L"  ?":St(MOk));
#endif
        }
        else
        {
          if (!WrongPassword)
            if (Arc.FileHead.Encrypted && (!Arc.FileHead.UsePswCheck || 
                Arc.BrokenHeader) && !AnySolidDataUnpackedWell)
            {
              Log(Arc.FileName,St(MEncrBadCRC),ArcFileName);
            }
            else
            {
              Log(Arc.FileName,St(MCRCFailed),ArcFileName);
            }
          BrokenFile=true;
          ErrHandler.SetErrorCode(RARX_CRC);
#ifdef RARDLL
          // If we already have ERAR_EOPEN as result of missing volume,
          // we should not replace it with less precise ERAR_BAD_DATA.
          if (Cmd->DllError!=ERAR_EOPEN)
            Cmd->DllError=ERAR_BAD_DATA;
#endif
        }
      }
#ifndef GUI
      else
        mprintf(L"\b\b\b\b\b     ");
#endif

      if (!TestMode && !WrongPassword && (Command=='X' || Command=='E') &&
          (!LinkEntry || Arc.FileHead.RedirType==FSREDIR_FILECOPY && LinkSuccess) && 
          (!BrokenFile || Cmd->KeepBroken))
      {
        // We could preallocate more space that really written to broken file.
        if (BrokenFile)
          CurFile.Truncate();

#if defined(_WIN_ALL) || defined(_EMX)
        if (Cmd->ClearArc)
          Arc.FileHead.FileAttr&=~FILE_ATTRIBUTE_ARCHIVE;
#endif


        CurFile.SetOpenFileTime(
          Cmd->xmtime==EXTTIME_NONE ? NULL:&Arc.FileHead.mtime,
          Cmd->xctime==EXTTIME_NONE ? NULL:&Arc.FileHead.ctime,
          Cmd->xatime==EXTTIME_NONE ? NULL:&Arc.FileHead.atime);
        CurFile.Close();
#if defined(_WIN_ALL) && !defined(SFX_MODULE)
        if (Cmd->SetCompressedAttr &&
            (Arc.FileHead.FileAttr & FILE_ATTRIBUTE_COMPRESSED)!=0)
          SetFileCompression(CurFile.FileName,true);
#endif
#ifdef _UNIX
        if (Cmd->ProcessOwners && Arc.Format==RARFMT50 && Arc.FileHead.UnixOwnerSet)
          SetUnixOwner(Arc,CurFile.FileName);
#endif

        CurFile.SetCloseFileTime(
          Cmd->xmtime==EXTTIME_NONE ? NULL:&Arc.FileHead.mtime,
          Cmd->xatime==EXTTIME_NONE ? NULL:&Arc.FileHead.atime);
        if (!Cmd->IgnoreGeneralAttr)
          SetFileAttr(CurFile.FileName,Arc.FileHead.FileAttr);
        PrevExtracted=true;
      }
    }
  }
  if (ExactMatch)
    MatchedArgs++;
  if (DataIO.NextVolumeMissing)
    return false;
  if (!ExtrFile)
    if (!Arc.Solid)
      Arc.SeekToNext();
    else
      if (!SkipSolid)
        return false;
  return true;
}
Ejemplo n.º 2
0
bool CmdExtract::ExtractCurrentFile(Archive &Arc,size_t HeaderSize,bool &Repeat)
{
  wchar Command=Cmd->Command[0];
  if (HeaderSize==0)
  {
    if (DataIO.UnpVolume)
    {
#ifdef NOVOLUME
      return false;
#else
      // Supposing we unpack an old RAR volume without end of archive record
      // and last file is not split between volumes.
      if (!MergeArchive(Arc,&DataIO,false,Command))
      {
        ErrHandler.SetErrorCode(RARX_WARNING);
        return false;
      }
#endif
    }
    else
      return false;
  }
  HEADER_TYPE HeaderType=Arc.GetHeaderType();
  if (HeaderType!=HEAD_FILE)
  {
#ifndef SFX_MODULE
    if (HeaderType==HEAD3_OLDSERVICE && PrevExtracted)
      SetExtraInfo20(Cmd,Arc,DestFileName);
#endif
    if (HeaderType==HEAD_SERVICE && PrevExtracted)
      SetExtraInfo(Cmd,Arc,DestFileName);
    if (HeaderType==HEAD_ENDARC)
    {
      if (Arc.EndArcHead.NextVolume)
      {
#ifndef NOVOLUME
        if (!MergeArchive(Arc,&DataIO,false,Command))
        {
          ErrHandler.SetErrorCode(RARX_WARNING);
          return false;
        }
#endif
        Arc.Seek(Arc.CurBlockPos,SEEK_SET);
        return true;
      }
      else
        return false;
    }
    Arc.SeekToNext();
    return true;
  }
  PrevExtracted=false;

  if (!Cmd->Recurse && MatchedArgs>=Cmd->FileArgs.ItemsCount() && AllMatchesExact)
    return false;

  int MatchType=MATCH_WILDSUBPATH;

  bool EqualNames=false;
  wchar MatchedArg[NM];
  int MatchNumber=Cmd->IsProcessFile(Arc.FileHead,&EqualNames,MatchType,MatchedArg,ASIZE(MatchedArg));
  bool MatchFound=MatchNumber!=0;
#ifndef SFX_MODULE
  if (Cmd->ExclPath==EXCL_BASEPATH)
  {
    wcsncpyz(Cmd->ArcPath,MatchedArg,ASIZE(Cmd->ArcPath));
    *PointToName(Cmd->ArcPath)=0;
    if (IsWildcard(Cmd->ArcPath)) // Cannot correctly process path*\* masks here.
      *Cmd->ArcPath=0;
  }
#endif
  if (MatchFound && !EqualNames)
    AllMatchesExact=false;

  Arc.ConvertAttributes();

#if !defined(SFX_MODULE) && !defined(RARDLL)
  if (Arc.FileHead.SplitBefore && FirstFile)
  {
    wchar CurVolName[NM];
    wcsncpyz(CurVolName,ArcName,ASIZE(CurVolName));
    VolNameToFirstName(ArcName,ArcName,ASIZE(ArcName),Arc.NewNumbering);

    if (wcsicomp(ArcName,CurVolName)!=0 && FileExist(ArcName))
    {
      // If first volume name does not match the current name and if such
      // volume name really exists, let's unpack from this first volume.
      Repeat=true;
      return false;
    }
#ifndef RARDLL
    if (!ReconstructDone)
    {
      ReconstructDone=true;
      if (RecVolumesRestore(Cmd,Arc.FileName,true))
      {
        Repeat=true;
        return false;
      }
    }
#endif
    wcsncpyz(ArcName,CurVolName,ASIZE(ArcName));
  }
#endif

  wchar ArcFileName[NM];
  ConvertPath(Arc.FileHead.FileName,ArcFileName);

  if (Arc.FileHead.Version)
  {
    if (Cmd->VersionControl!=1 && !EqualNames)
    {
      if (Cmd->VersionControl==0)
        MatchFound=false;
      int Version=ParseVersionFileName(ArcFileName,false);
      if (Cmd->VersionControl-1==Version)
        ParseVersionFileName(ArcFileName,true);
      else
        MatchFound=false;
    }
  }
  else
    if (!Arc.IsArcDir() && Cmd->VersionControl>1)
      MatchFound=false;

  DataIO.UnpVolume=Arc.FileHead.SplitAfter;
  DataIO.NextVolumeMissing=false;

  Arc.Seek(Arc.NextBlockPos-Arc.FileHead.PackSize,SEEK_SET);

  bool ExtrFile=false;
  bool SkipSolid=false;

#ifndef SFX_MODULE
  if (FirstFile && (MatchFound || Arc.Solid) && Arc.FileHead.SplitBefore)
  {
    if (MatchFound)
    {
      uiMsg(UIERROR_NEEDPREVVOL,Arc.FileName,ArcFileName);
#ifdef RARDLL
      Cmd->DllError=ERAR_BAD_DATA;
#endif
      ErrHandler.SetErrorCode(RARX_OPEN);
    }
    MatchFound=false;
  }

  FirstFile=false;
#endif

  if (MatchFound || (SkipSolid=Arc.Solid)!=0)
  {
    // First common call of uiStartFileExtract. It is done before overwrite
    // prompts, so if SkipSolid state is changed below, we'll need to make
    // additional uiStartFileExtract calls with updated parameters.
    if (!uiStartFileExtract(ArcFileName,!Cmd->Test,Cmd->Test && Command!='I',SkipSolid))
      return false;

    ExtrPrepareName(Arc,ArcFileName,DestFileName,ASIZE(DestFileName));

    // DestFileName can be set empty in case of excessive -ap switch.
    ExtrFile=!SkipSolid && *DestFileName!=0 && !Arc.FileHead.SplitBefore;

    if ((Cmd->FreshFiles || Cmd->UpdateFiles) && (Command=='E' || Command=='X'))
    {
      FindData FD;
      if (FindFile::FastFind(DestFileName,&FD))
      {
        if (FD.mtime >= Arc.FileHead.mtime)
        {
          // If directory already exists and its modification time is newer 
          // than start of extraction, it is likely it was created 
          // when creating a path to one of already extracted items. 
          // In such case we'll better update its time even if archived 
          // directory is older.

          if (!FD.IsDir || FD.mtime<StartTime)
            ExtrFile=false;
        }
      }
      else
        if (Cmd->FreshFiles)
          ExtrFile=false;
    }

    if (Arc.FileHead.Encrypted)
    {
#ifdef RARDLL
      if (!ExtrDllGetPassword())
        return false;
#else
      if (!ExtrGetPassword(Arc,ArcFileName))
      {
        PasswordCancelled=true;
        return false;
      }
#endif
      // Skip only the current encrypted file if empty password is entered.
      if (!Cmd->Password.IsSet())
      {
        ErrHandler.SetErrorCode(RARX_WARNING);
#ifdef RARDLL
        Cmd->DllError=ERAR_MISSING_PASSWORD;
#endif
        ExtrFile=false;
      }
    }

#ifdef RARDLL
    if (*Cmd->DllDestName!=0)
      wcsncpyz(DestFileName,Cmd->DllDestName,ASIZE(DestFileName));
#endif

    if (!CheckUnpVer(Arc,ArcFileName))
    {
      ExtrFile=false;
      ErrHandler.SetErrorCode(RARX_FATAL);
#ifdef RARDLL
      Cmd->DllError=ERAR_UNKNOWN_FORMAT;
#endif
    }

    File CurFile;

    bool LinkEntry=Arc.FileHead.RedirType!=FSREDIR_NONE;
    if (LinkEntry && Arc.FileHead.RedirType!=FSREDIR_FILECOPY)
    {
      if (ExtrFile && Command!='P' && !Cmd->Test)
      {
        // Overwrite prompt for symbolic and hard links.
        bool UserReject=false;
        if (FileExist(DestFileName) && !UserReject)
          FileCreate(Cmd,NULL,DestFileName,ASIZE(DestFileName),&UserReject,Arc.FileHead.UnpSize,&Arc.FileHead.mtime);
        if (UserReject)
          ExtrFile=false;
      }
    }
    else
      if (Arc.IsArcDir())
      {
        if (!ExtrFile || Command=='P' || Command=='I' || Command=='E' || Cmd->ExclPath==EXCL_SKIPWHOLEPATH)
          return true;
        TotalFileCount++;
        ExtrCreateDir(Arc,ArcFileName);
        return true;
      }
      else
        if (ExtrFile) // Create files and file copies (FSREDIR_FILECOPY).
          ExtrFile=ExtrCreateFile(Arc,CurFile);

    if (!ExtrFile && Arc.Solid)
    {
      SkipSolid=true;
      ExtrFile=true;

      // We changed SkipSolid, so we need to call uiStartFileExtract
      // with "Skip" parameter to change the operation status 
      // from "extracting" to "skipping". For example, it can be necessary
      // if user answered "No" to overwrite prompt when unpacking
      // a solid archive.
      if (!uiStartFileExtract(ArcFileName,false,false,true))
        return false;
    }
    if (ExtrFile)
    {
      bool TestMode=Cmd->Test || SkipSolid; // Unpack to memory, not to disk.

      if (!SkipSolid)
      {
        if (!TestMode && Command!='P' && CurFile.IsDevice())
        {
          uiMsg(UIERROR_INVALIDNAME,Arc.FileName,DestFileName);
          ErrHandler.WriteError(Arc.FileName,DestFileName);
        }
        TotalFileCount++;
      }
      FileCount++;
#ifndef GUI
      if (Command!='I')
      {
        if (SkipSolid)
          mprintf(St(MExtrSkipFile),ArcFileName);
        else
          switch(Cmd->Test ? 'T':Command) // "Test" can be also enabled by -t switch.
          {
            case 'T':
              mprintf(St(MExtrTestFile),ArcFileName);
              break;
#ifndef SFX_MODULE
            case 'P':
              mprintf(St(MExtrPrinting),ArcFileName);
              break;
#endif
            case 'X':
            case 'E':
              mprintf(St(MExtrFile),DestFileName);
              break;
          }
      }
      if (!Cmd->DisablePercentage)
        mprintf(L"     ");
#endif

      SecPassword FilePassword=Cmd->Password;
#if defined(_WIN_ALL) && !defined(SFX_MODULE)
      ConvertDosPassword(Arc,FilePassword);
#endif

      byte PswCheck[SIZE_PSWCHECK];
      DataIO.SetEncryption(false,Arc.FileHead.CryptMethod,&FilePassword,
             Arc.FileHead.SaltSet ? Arc.FileHead.Salt:NULL,
             Arc.FileHead.InitV,Arc.FileHead.Lg2Count,
             PswCheck,Arc.FileHead.HashKey);
      bool WrongPassword=false;

      // If header is damaged, we cannot rely on password check value,
      // because it can be damaged too.
      if (Arc.FileHead.Encrypted && Arc.FileHead.UsePswCheck &&
          memcmp(Arc.FileHead.PswCheck,PswCheck,SIZE_PSWCHECK)!=0 &&
          !Arc.BrokenHeader)
      {
        uiMsg(UIERROR_BADPSW,Arc.FileName);
        ErrHandler.SetErrorCode(RARX_BADPWD);
        WrongPassword=true;
      }
      DataIO.CurUnpRead=0;
      DataIO.CurUnpWrite=0;
      DataIO.UnpHash.Init(Arc.FileHead.FileHash.Type,Cmd->Threads);
      DataIO.PackedDataHash.Init(Arc.FileHead.FileHash.Type,Cmd->Threads);
      DataIO.SetPackedSizeToRead(Arc.FileHead.PackSize);
      DataIO.SetFiles(&Arc,&CurFile);
      DataIO.SetTestMode(TestMode);
      DataIO.SetSkipUnpCRC(SkipSolid);

#if defined(_WIN_ALL) && !defined(SFX_MODULE) && !defined(SILENT)
      if (!TestMode && !WrongPassword && !Arc.BrokenHeader &&
          Arc.FileHead.UnpSize>0xffffffff && (Fat32 || !NotFat32))
      {
        if (!Fat32) // Not detected yet.
          NotFat32=!(Fat32=IsFAT(Cmd->ExtrPath));
        if (Fat32)
          uiMsg(UIMSG_FAT32SIZE); // Inform user about FAT32 size limit.
      }
#endif

      if (!TestMode && !WrongPassword && !Arc.BrokenHeader &&
          (Arc.FileHead.PackSize<<11)>Arc.FileHead.UnpSize &&
          (Arc.FileHead.UnpSize<100000000 || Arc.FileLength()>Arc.FileHead.PackSize))
        CurFile.Prealloc(Arc.FileHead.UnpSize);

      CurFile.SetAllowDelete(!Cmd->KeepBroken);

      bool FileCreateMode=!TestMode && !SkipSolid && Command!='P';
      bool ShowChecksum=true; // Display checksum verification result.

      bool LinkSuccess=true; // Assume success for test mode.
      if (LinkEntry)
      {
        FILE_SYSTEM_REDIRECT Type=Arc.FileHead.RedirType;

        if (Type==FSREDIR_HARDLINK || Type==FSREDIR_FILECOPY)
        {
          wchar NameExisting[NM];
          ExtrPrepareName(Arc,Arc.FileHead.RedirName,NameExisting,ASIZE(NameExisting));
          if (FileCreateMode && *NameExisting!=0) // *NameExisting can be 0 in case of excessive -ap switch.
          {
            if (Type==FSREDIR_HARDLINK)
              LinkSuccess=ExtractHardlink(DestFileName,NameExisting,ASIZE(NameExisting));
            else
              LinkSuccess=ExtractFileCopy(CurFile,Arc.FileName,DestFileName,NameExisting,ASIZE(NameExisting));
          }
        }
        else
          if (Type==FSREDIR_UNIXSYMLINK || Type==FSREDIR_WINSYMLINK || Type==FSREDIR_JUNCTION)
          {
            if (FileCreateMode)
              LinkSuccess=ExtractSymlink(Cmd,DataIO,Arc,DestFileName);
          }
          else
          {
            uiMsg(UIERROR_UNKNOWNEXTRA, Arc.FileName, DestFileName);
            LinkSuccess=false;
          }
          
          if (!LinkSuccess || (Arc.Format==RARFMT15 && !FileCreateMode))
          {
            // RAR 5.x links have a valid data checksum even in case of
            // failure, because they do not store any data.
            // We do not want to display "OK" in this case.
            // For 4.x symlinks we verify the checksum only when extracting,
            // but not when testing an archive.
            ShowChecksum=false;
          }
          PrevExtracted=FileCreateMode && LinkSuccess;
      }
      else
        if (!Arc.FileHead.SplitBefore && !WrongPassword)
        {
          if (Arc.FileHead.Method==0)
            UnstoreFile(DataIO,Arc.FileHead.UnpSize);
          else
          {
#ifdef _ANDROID
            // malloc and new do not report memory allocation errors
            // in Android, so if free memory is set, check it here
            // trying to prevent crash.
            if (Cmd->FreeMem!=0 && Cmd->FreeMem < Arc.FileHead.WinSize)
              throw std::bad_alloc();
#endif
            Unp->Init(Arc.FileHead.WinSize,Arc.FileHead.Solid);
            Unp->SetDestSize(Arc.FileHead.UnpSize);
#ifndef SFX_MODULE
            if (Arc.Format!=RARFMT50 && Arc.FileHead.UnpVer<=15)
              Unp->DoUnpack(15,FileCount>1 && Arc.Solid);
            else
#endif
              Unp->DoUnpack(Arc.FileHead.UnpVer,Arc.FileHead.Solid);
          }
        }

      Arc.SeekToNext();

      // We check for "split after" flag to detect partially extracted files
      // from incomplete volume sets. For them file header contains packed
      // data hash, which must not be compared against unpacked data hash
      // to prevent accidental match. Moreover, for -m0 volumes packed data
      // hash would match truncated unpacked data hash and lead to fake "OK"
      // in incomplete volume set.
      bool ValidCRC=!Arc.FileHead.SplitAfter && DataIO.UnpHash.Cmp(&Arc.FileHead.FileHash,Arc.FileHead.UseHashKey ? Arc.FileHead.HashKey:NULL);

      // We set AnySolidDataUnpackedWell to true if we found at least one
      // valid non-zero solid file in preceding solid stream. If it is true
      // and if current encrypted file is broken, we do not need to hint
      // about a wrong password and can report CRC error only.
      if (!Arc.FileHead.Solid)
        AnySolidDataUnpackedWell=false; // Reset the flag, because non-solid file is found.
      else
        if (Arc.FileHead.Method!=0 && Arc.FileHead.UnpSize>0 && ValidCRC)
          AnySolidDataUnpackedWell=true;
 
      bool BrokenFile=false;
      
      // Checksum is not calculated in skip solid mode for performance reason.
      if (!SkipSolid && ShowChecksum)
      {
        if (!WrongPassword && ValidCRC)
        {
#ifndef GUI
          if (Command!='P' && Command!='I')
            mprintf(L"%s%s ",Cmd->DisablePercentage ? L" ":L"\b\b\b\b\b ",
              Arc.FileHead.FileHash.Type==HASH_NONE ? L"  ?":St(MOk));
#endif
        }
        else
        {
          if (!WrongPassword)
          {
            if (Arc.FileHead.Encrypted && (!Arc.FileHead.UsePswCheck ||
                Arc.BrokenHeader) && !AnySolidDataUnpackedWell)
              uiMsg(UIERROR_CHECKSUMENC,Arc.FileName,ArcFileName);
            else
              uiMsg(UIERROR_CHECKSUM,Arc.FileName,ArcFileName);
          }
          BrokenFile=true;
          ErrHandler.SetErrorCode(RARX_CRC);
#ifdef RARDLL
          // If we already have ERAR_EOPEN as result of missing volume,
          // we should not replace it with less precise ERAR_BAD_DATA.
          if (Cmd->DllError!=ERAR_EOPEN)
            Cmd->DllError=WrongPassword ? ERAR_BAD_PASSWORD : ERAR_BAD_DATA;
#endif
        }
      }
#ifndef GUI
      else
        mprintf(L"\b\b\b\b\b     ");
#endif

      if (!TestMode && !WrongPassword && (Command=='X' || Command=='E') &&
          (!LinkEntry || (Arc.FileHead.RedirType==FSREDIR_FILECOPY && LinkSuccess)) && 
          (!BrokenFile || Cmd->KeepBroken))
      {
        // We could preallocate more space that really written to broken file.
        if (BrokenFile)
          CurFile.Truncate();

#if defined(_WIN_ALL) || defined(_EMX)
        if (Cmd->ClearArc)
          Arc.FileHead.FileAttr&=~FILE_ATTRIBUTE_ARCHIVE;
#endif


        CurFile.SetOpenFileTime(
          Cmd->xmtime==EXTTIME_NONE ? NULL:&Arc.FileHead.mtime,
          Cmd->xctime==EXTTIME_NONE ? NULL:&Arc.FileHead.ctime,
          Cmd->xatime==EXTTIME_NONE ? NULL:&Arc.FileHead.atime);
        CurFile.Close();
#if defined(_WIN_ALL) && !defined(SFX_MODULE)
        if (Cmd->SetCompressedAttr &&
            (Arc.FileHead.FileAttr & FILE_ATTRIBUTE_COMPRESSED)!=0)
          SetFileCompression(CurFile.FileName,true);
#endif
#ifdef _UNIX
        if (Cmd->ProcessOwners && Arc.Format==RARFMT50 && Arc.FileHead.UnixOwnerSet)
          SetUnixOwner(Arc,CurFile.FileName);
#endif

        CurFile.SetCloseFileTime(
          Cmd->xmtime==EXTTIME_NONE ? NULL:&Arc.FileHead.mtime,
          Cmd->xatime==EXTTIME_NONE ? NULL:&Arc.FileHead.atime);
        if (!Cmd->IgnoreGeneralAttr && !SetFileAttr(CurFile.FileName,Arc.FileHead.FileAttr))
          uiMsg(UIERROR_FILEATTR,Arc.FileName,CurFile.FileName);

        PrevExtracted=true;
      }
    }
  }
  if (MatchFound)
    MatchedArgs++;
  if (DataIO.NextVolumeMissing)
    return false;
  if (!ExtrFile)
  {
    if (!Arc.Solid)
      Arc.SeekToNext();
    else
      if (!SkipSolid)
        return false;
  }
  return true;
}
Ejemplo n.º 3
0
bool MergeArchive(Archive &Arc,ComprDataIO *DataIO,bool ShowFileName,wchar Command)
{
  RAROptions *Cmd=Arc.GetRAROptions();

  HEADER_TYPE HeaderType=Arc.GetHeaderType();
  FileHeader *hd=HeaderType==HEAD_SERVICE ? &Arc.SubHead:&Arc.FileHead;
  bool SplitHeader=(HeaderType==HEAD_FILE || HeaderType==HEAD_SERVICE) &&
                   hd->SplitAfter;

  if (DataIO!=NULL && SplitHeader)
  {
    bool PackedHashPresent=Arc.Format==RARFMT50 || 
         hd->UnpVer>=20 && hd->FileHash.CRC32!=0xffffffff;
    if (PackedHashPresent && 
        !DataIO->PackedDataHash.Cmp(&hd->FileHash,hd->UseHashKey ? hd->HashKey:NULL))
      uiMsg(UIERROR_CHECKSUMPACKED, Arc.FileName, hd->FileName);
  }

  int64 PosBeforeClose=Arc.Tell();

  if (DataIO!=NULL)
    DataIO->ProcessedArcSize+=Arc.FileLength();


  Arc.Close();

  wchar NextName[NM];
  wcscpy(NextName,Arc.FileName);
  NextVolumeName(NextName,ASIZE(NextName),!Arc.NewNumbering);

#if !defined(SFX_MODULE) && !defined(RARDLL)
  bool RecoveryDone=false;
#endif
  bool FailedOpen=false,OldSchemeTested=false;

#if !defined(GUI) && !defined(SILENT)
  // In -vp mode we force the pause before next volume even if it is present
  // and even if we are on the hard disk. It is important when user does not
  // want to process partially downloaded volumes preliminary.
  if (Cmd->VolumePause && !uiAskNextVolume(NextName,ASIZE(NextName)))
    FailedOpen=true;
#endif

  uint OpenMode = Cmd->OpenShared ? FMF_OPENSHARED : 0;

  if (!FailedOpen)
    while (!Arc.Open(NextName,OpenMode))
    {
      // We need to open a new volume which size was not calculated
      // in total size before, so we cannot calculate the total progress
      // anymore. Let's reset the total size to zero and stop 
      // the total progress.
      if (DataIO!=NULL)
        DataIO->TotalArcSize=0;

      if (!OldSchemeTested)
      {
        // Checking for new style volumes renamed by user to old style
        // name format. Some users did it for unknown reason.
        wchar AltNextName[NM];
        wcscpy(AltNextName,Arc.FileName);
        NextVolumeName(AltNextName,ASIZE(AltNextName),true);
        OldSchemeTested=true;
        if (Arc.Open(AltNextName,OpenMode))
        {
          wcscpy(NextName,AltNextName);
          break;
        }
      }
#ifdef RARDLL
      if (!DllVolChange(Cmd,NextName,ASIZE(NextName)))
      {
        FailedOpen=true;
        break;
      }
#else // !RARDLL

#ifndef SFX_MODULE
      if (!RecoveryDone)
      {
        RecVolumesRestore(Cmd,Arc.FileName,true);
        RecoveryDone=true;
        continue;
      }
#endif

#ifndef GUI
      if (!Cmd->VolumePause && !IsRemovable(NextName))
      {
        FailedOpen=true;
        break;
      }
#endif
#ifndef SILENT
      if (Cmd->AllYes || !uiAskNextVolume(NextName,ASIZE(NextName)))
#endif
      {
        FailedOpen=true;
        break;
      }

#endif // RARDLL
    }
  
  if (FailedOpen)
  {
    uiMsg(UIERROR_MISSINGVOL,NextName);
    Arc.Open(Arc.FileName,OpenMode);
    Arc.Seek(PosBeforeClose,SEEK_SET);
    return false;
  }

  if (Command=='T' || Command=='X' || Command=='E')
    mprintf(St(Command=='T' ? MTestVol:MExtrVol),Arc.FileName);


  Arc.CheckArc(true);
#ifdef RARDLL
  if (!DllVolNotify(Cmd,NextName))
    return false;
#endif

  if (SplitHeader)
    Arc.SearchBlock(HeaderType);
  else
    Arc.ReadHeader();
  if (Arc.GetHeaderType()==HEAD_FILE)
  {
    Arc.ConvertAttributes();
    Arc.Seek(Arc.NextBlockPos-Arc.FileHead.PackSize,SEEK_SET);
  }
#ifndef GUI
  if (ShowFileName)
  {
    mprintf(St(MExtrPoints),Arc.FileHead.FileName);
    if (!Cmd->DisablePercentage)
      mprintf(L"     ");
  }
#endif
  if (DataIO!=NULL)
  {
    if (HeaderType==HEAD_ENDARC)
      DataIO->UnpVolume=false;
    else
    {
      DataIO->UnpVolume=hd->SplitAfter;
      DataIO->SetPackedSizeToRead(hd->PackSize);
    }
#ifdef SFX_MODULE
    DataIO->UnpArcSize=Arc.FileLength();
#endif
    
    // Reset the size of packed data read from current volume. It is used
    // to display the total progress and preceding volumes are already
    // compensated with ProcessedArcSize, so we need to reset this variable.
    DataIO->CurUnpRead=0;

    DataIO->PackedDataHash.Init(hd->FileHash.Type,Cmd->Threads);
  }
  return true;
}