/*
========================================================================
Routine Description:
Send log message through wireless event
Support standard iw_event with IWEVCUSTOM. It is used below.
iwreq_data.data.flags is used to store event_flag that is defined by user.
iwreq_data.data.length is the length of the event log.
The format of the event log is composed of the entry's MAC address and
the desired log message (refer to pWirelessEventText).
ex: 11:22:33:44:55:66 has associated successfully
p.s. The requirement of Wireless Extension is v15 or newer.
========================================================================
*/
VOID RtmpDrvSendWirelessEvent(
IN VOID *pAdSrc,
IN USHORT Event_flag,
IN PUCHAR pAddr,
IN UCHAR BssIdx,
IN CHAR Rssi)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
PSTRING pBuf = NULL, pBufPtr = NULL;
USHORT event, type, BufLen;
UCHAR event_table_len = 0;
if (pAd->CommonCfg.bWirelessEvent == FALSE)
return;
type = Event_flag & 0xFF00;
event = Event_flag & 0x00FF;
switch (type)
{
case IW_SYS_EVENT_FLAG_START:
event_table_len = IW_SYS_EVENT_TYPE_NUM;
break;
#ifdef IDS_SUPPORT
case IW_SPOOF_EVENT_FLAG_START:
event_table_len = IW_SPOOF_EVENT_TYPE_NUM;
break;
case IW_FLOOD_EVENT_FLAG_START:
event_table_len = IW_FLOOD_EVENT_TYPE_NUM;
break;
#endif /* IDS_SUPPORT */
#ifdef WSC_INCLUDED
case IW_WSC_EVENT_FLAG_START:
event_table_len = IW_WSC_EVENT_TYPE_NUM;
break;
#endif /* WSC_INCLUDED */
}
if (event_table_len == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s : The type(%0x02x) is not valid.\n", __FUNCTION__, type));
return;
}
if (event >= event_table_len)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s : The event(%0x02x) is not valid.\n", __FUNCTION__, event));
return;
}
/*Allocate memory and copy the msg. */
/* if((pBuf = kmalloc(IW_CUSTOM_MAX_LEN, GFP_ATOMIC)) != NULL) */
os_alloc_mem(NULL, (UCHAR **)&pBuf, IW_CUSTOM_MAX_LEN);
if(pBuf != NULL)
{
/*Prepare the payload */
memset(pBuf, 0, IW_CUSTOM_MAX_LEN);
pBufPtr = pBuf;
if (pAddr)
pBufPtr += sprintf(pBufPtr, "(RT2860) STA(%02x:%02x:%02x:%02x:%02x:%02x) ", PRINT_MAC(pAddr));
else if (BssIdx < MAX_MBSSID_NUM(pAd))
pBufPtr += sprintf(pBufPtr, "(RT2860) BSS(ra%d) ", BssIdx);
else
pBufPtr += sprintf(pBufPtr, "(RT2860) ");
if (type == IW_SYS_EVENT_FLAG_START)
{
pBufPtr += sprintf(pBufPtr, "%s", pWirelessSysEventText[event]);
if (Event_flag == IW_CHANNEL_CHANGE_EVENT_FLAG)
{
pBufPtr += sprintf(pBufPtr, "%3d", Rssi);
}
}
#ifdef IDS_SUPPORT
else if (type == IW_SPOOF_EVENT_FLAG_START)
pBufPtr += sprintf(pBufPtr, "%s (RSSI=%d)", pWirelessSpoofEventText[event], Rssi);
else if (type == IW_FLOOD_EVENT_FLAG_START)
pBufPtr += sprintf(pBufPtr, "%s", pWirelessFloodEventText[event]);
#endif /* IDS_SUPPORT */
#ifdef WSC_INCLUDED
else if (type == IW_WSC_EVENT_FLAG_START)
pBufPtr += sprintf(pBufPtr, "%s", pWirelessWscEventText[event]);
#endif /* WSC_INCLUDED */
else
pBufPtr += sprintf(pBufPtr, "%s", "unknown event");
pBufPtr[pBufPtr - pBuf] = '\0';
BufLen = pBufPtr - pBuf;
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, Event_flag, NULL, (PUCHAR)pBuf, BufLen);
/*DBGPRINT(RT_DEBUG_TRACE, ("%s : %s\n", __FUNCTION__, pBuf)); */
/* kfree(pBuf); */
os_free_mem(NULL, pBuf);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s : Can't allocate memory for wireless event.\n", __FUNCTION__));
}
int rt28xx_init(
IN PRTMP_ADAPTER pAd,
IN PSTRING pDefaultMac,
IN PSTRING pHostName)
{
UINT index;
UCHAR TmpPhy;
NDIS_STATUS Status;
UINT32 MacCsr0 = 0;
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// If dirver doesn't wake up firmware here,
// NICLoadFirmware will hang forever when interface is up again.
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
AUTO_WAKEUP_STRUC AutoWakeupCfg;
AsicForceWakeup(pAd, TRUE);
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
}
}
#endif // PCIE_PS_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
// reset Adapter flags
RTMP_CLEAR_FLAGS(pAd);
// Init BssTab & ChannelInfo tabbles for auto channel select.
#ifdef DOT11_N_SUPPORT
// Allocate BA Reordering memory
ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM);
#endif // DOT11_N_SUPPORT //
// Make sure MAC gets ready.
index = 0;
do
{
RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
pAd->MACVersion = MacCsr0;
if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF))
break;
RTMPusecDelay(10);
}
while (index++ < 100);
DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
// Disable DMA
RT28XXDMADisable(pAd);
// Load 8051 firmware
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
goto err1;
}
NICLoadRateSwitchingParams(pAd);
// Disable interrupts here which is as soon as possible
// This statement should never be true. We might consider to remove it later
#ifdef RESOURCE_PRE_ALLOC
Status = RTMPInitTxRxRingMemory(pAd);
#else
Status = RTMPAllocTxRxRingMemory(pAd);
#endif // RESOURCE_PRE_ALLOC //
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPAllocDMAMemory failed, Status[=0x%08x]\n", Status));
goto err1;
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
// initialize MLME
//
Status = RtmpMgmtTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err2;
Status = MlmeInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
goto err2;
}
// Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default
//
UserCfgInit(pAd);
Status = RtmpNetTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
// COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);
// pAd->bForcePrintTX = TRUE;
CfgInitHook(pAd);
#ifdef BLOCK_NET_IF
initblockQueueTab(pAd);
#endif // BLOCK_NET_IF //
Status = MeasureReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n", Status));
goto err4;
}
Status = TpcReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n", Status));
goto err4;
}
//
// Init the hardware, we need to init asic before read registry, otherwise mac register will be reset
//
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
if (Status != NDIS_STATUS_SUCCESS)
goto err4;
}
// Read parameters from Config File
Status = RTMPReadParametersHook(pAd);
DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n", Status));
goto err4;
}
#ifdef RTMP_MAC_USB
pAd->CommonCfg.bMultipleIRP = FALSE;
if (pAd->CommonCfg.bMultipleIRP)
pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
else
pAd->CommonCfg.NumOfBulkInIRP = 1;
#endif // RTMP_MAC_USB //
#ifdef DOT11_N_SUPPORT
//Init Ba Capability parameters.
// RT28XX_BA_INIT(pAd);
pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
// UPdata to HT IE
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
#endif // DOT11_N_SUPPORT //
// after reading Registry, we now know if in AP mode or STA mode
// Load 8051 firmware; crash when FW image not existent
// Status = NICLoadFirmware(pAd);
// if (Status != NDIS_STATUS_SUCCESS)
// break;
DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
// We should read EEPROM for all cases. rt2860b
NICReadEEPROMParameters(pAd, (PUCHAR)pDefaultMac);
#ifdef CONFIG_STA_SUPPORT
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
NICInitAsicFromEEPROM(pAd); //rt2860b
#ifdef RTMP_INTERNAL_TX_ALC
//
// Initialize the desired TSSI table
//
InitDesiredTSSITable(pAd);
#endif // RTMP_INTERNAL_TX_ALC //
// Set PHY to appropriate mode
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
#endif // DOT11_N_SUPPORT //
// No valid channels.
if (pAd->ChannelListNum == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
goto err4;
}
#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]));
#endif // DOT11_N_SUPPORT //
// APInitialize(pAd);
#ifdef IKANOS_VX_1X0
VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif // IKANOS_VX_1X0 //
//
// Initialize RF register to default value
//
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
/*
Some modules init must be called before APStartUp().
Or APStartUp() will make up beacon content and call
other modules API to get some information to fill.
*/
// 8051 firmware require the signal during booting time.
//2008/11/28:KH marked the following codes to patch Frequency offset bug
//AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
if (pAd && (Status != NDIS_STATUS_SUCCESS))
{
//
// Undo everything if it failed
//
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
// NdisMDeregisterInterrupt(&pAd->Interrupt);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
// RTMPFreeAdapter(pAd); // we will free it in disconnect()
}
else if (pAd)
{
// Microsoft HCT require driver send a disconnect event after driver initialization.
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
// pAd->IndicateMediaState = NdisMediaStateDisconnected;
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
#ifdef RTMP_MAC_USB
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
//
// Support multiple BulkIn IRP,
// the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
//
for (index = 0; index < pAd->CommonCfg.NumOfBulkInIRP; index++)
{
RTUSBBulkReceive(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n"));
}
#endif // RTMP_MAC_USB //
}// end of else
// Set up the Mac address
RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->CurrentAddress[0]);
// Various AP function init
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface up.
RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_UP, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
return TRUE;
err4:
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
err3:
RtmpNetTaskExit(pAd);
err2:
MlmeHalt(pAd);
RtmpMgmtTaskExit(pAd);
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
RTMPFreeTxRxRingMemory(pAd);
#endif // RESOURCE_PRE_ALLOC //
err1:
#ifdef DOT11_N_SUPPORT
os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
#endif // DOT11_N_SUPPORT //
// shall not set priv to NULL here because the priv didn't been free yet.
//net_dev->priv = 0;
#ifdef INF_AMAZON_SE
err0:
#endif // INF_AMAZON_SE //
#ifdef ST
err0:
#endif // ST //
DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
return FALSE;
}
RTMP_BUILD_DRV_OPS_FUNCTION_BODY
#endif /* OS_ABL_FUNC_SUPPORT */
#endif /* LINUX */
int rt28xx_init(
IN VOID *pAdSrc,
IN PSTRING pDefaultMac,
IN PSTRING pHostName)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
UINT index;
UCHAR TmpPhy;
NDIS_STATUS Status;
if (pAd == NULL)
return FALSE;
#ifdef RT3290
DBGPRINT(RT_DEBUG_OFF, ("MACVersion=0x%x\n", pAd->MACVersion));
if (IS_RT3290(pAd))
{
UINT32 MacRegValue;
OSCCTL_STRUC osCtrl = {.word = 0};
CMB_CTRL_STRUC cmbCtrl = {.word = 0};
WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0};
RTMPEnableWlan(pAd, TRUE, TRUE);
//
// Too much time for reading efuse(enter/exit L1), and our device will hang up
// Disable L1
//
RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word);
if (WlanFunCtrl.field.WLAN_EN == TRUE)
{
WlanFunCtrl.field.PCIE_APP0_CLK_REQ = TRUE;
RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word);
}
//Enable ROSC_EN first then CAL_REQ
RTMP_IO_READ32(pAd, OSCCTL, &osCtrl.word);
osCtrl.field.ROSC_EN = TRUE; //HW force
RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word);
osCtrl.field.ROSC_EN = TRUE; //HW force
osCtrl.field.CAL_REQ = TRUE;
osCtrl.field.REF_CYCLE = 0x27;
RTMP_IO_WRITE32(pAd, OSCCTL, osCtrl.word);
RTMP_IO_READ32(pAd, CMB_CTRL, &cmbCtrl.word);
pAd->CmbCtrl.word = cmbCtrl.word;
// Overwrite default Coex Parameter
RTMP_IO_READ32(pAd, COEXCFG0, &MacRegValue);
MacRegValue &= ~(0xFF000000);
MacRegValue |= 0x5E000000;
RTMP_IO_WRITE32(pAd, COEXCFG0, MacRegValue);
}
if (IS_RT3290LE(pAd))
{
PLL_CTRL_STRUC PllCtrl;
RTMP_IO_READ32(pAd, PLL_CTRL, &PllCtrl.word);
//DBGPRINT(RT_DEBUG_OFF,("PllCtrl:0x%x\n",PllCtrl.word));
PllCtrl.field.VCO_FIXED_CURRENT_CONTROL = 0x1;
RTMP_IO_WRITE32(pAd, PLL_CTRL, PllCtrl.word);
}
#endif /* RT3290 */
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
/* If dirver doesn't wake up firmware here,*/
/* NICLoadFirmware will hang forever when interface is up again.*/
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
printk("rt28xx_init AsicForceWakeup\n");
AUTO_WAKEUP_STRUC AutoWakeupCfg;
AsicForceWakeup(pAd, TRUE);
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
}
}
#endif /* PCIE_PS_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
/* reset Adapter flags*/
RTMP_CLEAR_FLAGS(pAd);
/* Init BssTab & ChannelInfo tabbles for auto channel select.*/
#ifdef DOT11_N_SUPPORT
/* Allocate BA Reordering memory*/
if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE)
goto err1;
#endif /* DOT11_N_SUPPORT */
/* Make sure MAC gets ready.*/
index = 0;
if (WaitForAsicReady(pAd) != TRUE)
goto err1;
DBGPRINT(RT_DEBUG_TRACE, ("MAC[Ver:Rev=0x%08x]\n", pAd->MACVersion));
if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd))
{
DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n"));
goto err1;
}
#ifdef RTMP_MAC_PCI
/* To fix driver disable/enable hang issue when radio off*/
RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2);
#endif /* RTMP_MAC_PCI */
/* Disable DMA*/
RT28XXDMADisable(pAd);
/* Load 8051 firmware*/
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
goto err1;
}
NICLoadRateSwitchingParams(pAd);
/* Disable interrupts here which is as soon as possible*/
/* This statement should never be true. We might consider to remove it later*/
#ifdef RTMP_MAC_PCI
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
#endif /* RTMP_MAC_PCI */
#ifdef RESOURCE_PRE_ALLOC
Status = RTMPInitTxRxRingMemory(pAd);
#else
Status = RTMPAllocTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status));
goto err2;
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
/* initialize MLME*/
Status = RtmpMgmtTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
Status = MlmeInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
goto err4;
}
#ifdef RMTP_RBUS_SUPPORT
#ifdef VIDEO_TURBINE_SUPPORT
VideoConfigInit(pAd);
#endif /* VIDEO_TURBINE_SUPPORT */
#endif /* RMTP_RBUS_SUPPORT */
/* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/
UserCfgInit(pAd);
Status = RtmpNetTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err5;
//goto err5;
/* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/
/* pAd->bForcePrintTX = TRUE;*/
CfgInitHook(pAd);
#ifdef BLOCK_NET_IF
initblockQueueTab(pAd);
#endif /* BLOCK_NET_IF */
Status = MeasureReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
Status = TpcReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
//goto err6;
/* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
if (Status != NDIS_STATUS_SUCCESS)
goto err6;
}
/* Read parameters from Config File */
/* unknown, it will be updated in NICReadEEPROMParameters */
pAd->RfIcType = RFIC_UNKNOWN;
Status = RTMPReadParametersHook(pAd);
#ifdef CONFIG_STA_SUPPORT
#ifdef CREDENTIAL_STORE
RecoverConnectInfo(pAd);
#endif /* CREDENTIAL_STORE */
#endif /* CONFIG_STA_SUPPORT */
DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status));
goto err6;
}
#ifdef DOT11_N_SUPPORT
/*Init Ba Capability parameters.*/
/* RT28XX_BA_INIT(pAd);*/
pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
/* UPdata to HT IE*/
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
#endif /* DOT11_N_SUPPORT */
/* after reading Registry, we now know if in AP mode or STA mode*/
/* Load 8051 firmware; crash when FW image not existent*/
/* Status = NICLoadFirmware(pAd);*/
/* if (Status != NDIS_STATUS_SUCCESS)*/
/* break;*/
DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
/* We should read EEPROM for all cases. rt2860b*/
NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac);
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
#ifdef LED_CONTROL_SUPPORT
/* Send LED Setting to MCU */
RTMPInitLEDMode(pAd);
#endif /* LED_CONTROL_SUPPORT */
NICInitAsicFromEEPROM(pAd); /* rt2860b */
;
#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
#ifdef CONFIG_STA_SUPPORT
/* Initialize the frequency calibration*/
if (pAd->chipCap.FreqCalibrationSupport)
FrequencyCalibration(pAd);
#endif /* CONFIG_STA_SUPPORT */
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */
#ifdef RTMP_INTERNAL_TX_ALC
/* Initialize the desired TSSI table*/
RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd);
#endif /* RTMP_INTERNAL_TX_ALC */
#ifdef RTMP_TEMPERATURE_COMPENSATION
/* Temperature compensation, initialize the lookup table */
DBGPRINT(RT_DEBUG_OFF, ("bAutoTxAgcG = %d\n", pAd->bAutoTxAgcG));
if (pAd->chipCap.bTempCompTxALC && pAd->bAutoTxAgcG)
InitLookupTable(pAd);
#endif /* RTMP_TEMPERATURE_COMPENSATION */
#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
#ifdef CONFIG_STA_SUPPORT
if (pAd->chipCap.FreqCalibrationSupport)
InitFrequencyCalibration(pAd);
#endif /* CONFIG_STA_SUPPORT */
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */
/* Set PHY to appropriate mode*/
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
#endif /* DOT11_N_SUPPORT */
/* No valid channels.*/
if (pAd->ChannelListNum == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
goto err6;
}
//goto err6;
#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]));
#endif /* DOT11_N_SUPPORT */
/* APInitialize(pAd);*/
#ifdef IKANOS_VX_1X0
VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif /* IKANOS_VX_1X0 */
/*
Some modules init must be called before APStartUp().
Or APStartUp() will make up beacon content and call
other modules API to get some information to fill.
*/
if (pAd && (Status != NDIS_STATUS_SUCCESS))
{
/* Undo everything if it failed*/
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
/* NdisMDeregisterInterrupt(&pAd->Interrupt);*/
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
/* RTMPFreeAdapter(pAd); we will free it in disconnect()*/
}
else if (pAd)
{
/* Microsoft HCT require driver send a disconnect event after driver initialization.*/
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
}/* end of else*/
/* Set up the Mac address*/
#ifdef CONFIG_STA_SUPPORT
RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], (PUCHAR)(pAd->StaCfg.dev_name));
#endif /* CONFIG_STA_SUPPORT */
/* Various AP function init*/
#ifdef UAPSD_SUPPORT
UAPSD_Init(pAd);
#endif /* UAPSD_SUPPORT */
/* assign function pointers*/
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface up.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_UP, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
/* auto-fall back settings */
#ifdef RANGE_EXTEND
RTMP_IO_WRITE32(pAd, HT_FBK_CFG1, 0xedcba980);
#endif // RANGE_EXTEND //
#ifdef DOT11N_SS3_SUPPORT
if (pAd->CommonCfg.TxStream >= 3)
{
RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_0, 0x12111008);
RTMP_IO_WRITE32(pAd, TX_FBK_CFG_3S_1, 0x16151413);
}
#endif /* DOT11N_SS3_SUPPORT */
#ifdef STREAM_MODE_SUPPORT
RtmpStreamModeInit(pAd);
#endif /* STREAM_MODE_SUPPORT */
#ifdef DOT11_N_SUPPORT
#endif /* DOT11_N_SUPPORT */
#ifdef RT3290
if (IS_RT3290(pAd))
{
WLAN_FUN_CTRL_STRUC WlanFunCtrl = {.word = 0};
RTMP_MAC_PWRSV_EN(pAd, TRUE, TRUE);
//
// Too much time for reading efuse(enter/exit L1), and our device will hang up
// Enable L1
//
RTMP_IO_READ32(pAd, WLAN_FUN_CTRL, &WlanFunCtrl.word);
if (WlanFunCtrl.field.WLAN_EN == TRUE)
{
WlanFunCtrl.field.PCIE_APP0_CLK_REQ = FALSE;
RTMP_IO_WRITE32(pAd, WLAN_FUN_CTRL, WlanFunCtrl.word);
}
}
#endif /* RT3290 */
DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
return TRUE;
/*err7:
APStop(pAd);*/
err6:
#ifdef IGMP_SNOOP_SUPPORT
MultiCastFilterTableReset(&pAd->pMulticastFilterTable);
#endif /* IGMP_SNOOP_SUPPORT */
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
err5:
RtmpNetTaskExit(pAd);
UserCfgExit(pAd);
err4:
MlmeHalt(pAd);
RTMP_TimerListRelease(pAd);
err3:
RtmpMgmtTaskExit(pAd);
#ifdef RTMP_TIMER_TASK_SUPPORT
NdisFreeSpinLock(&pAd->TimerQLock);
#endif /* RTMP_TIMER_TASK_SUPPORT */
err2:
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
err1:
#ifdef RT3290
if (IS_RT3290(pAd))
RTMPEnableWlan(pAd, FALSE, FALSE);
#endif /* RT3290 */
#ifdef DOT11_N_SUPPORT
if(pAd->mpdu_blk_pool.mem)
os_free_mem(pAd, pAd->mpdu_blk_pool.mem); /* free BA pool*/
#endif /* DOT11_N_SUPPORT */
/* shall not set priv to NULL here because the priv didn't been free yet.*/
/*net_dev->priv = 0;*/
#ifdef INF_AMAZON_SE
err0:
#endif /* INF_AMAZON_SE */
#ifdef ST
err0:
#endif /* ST */
DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
return FALSE;
}
VOID RTMPDrvOpen(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
/* Enable Interrupt*/
RTMP_IRQ_ENABLE(pAd);
/* Now Enable RxTx*/
RTMPEnableRxTx(pAd);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
{
UINT32 reg = 0;
RTMP_IO_READ32(pAd, 0x1300, ®); /* clear garbage interrupts*/
printk("0x1300 = %08x\n", reg);
}
{
/* u32 reg;*/
/* UINT8 byte;*/
/* u16 tmp;*/
/* RTMP_IO_READ32(pAd, XIFS_TIME_CFG, ®);*/
/* tmp = 0x0805;*/
/* reg = (reg & 0xffff0000) | tmp;*/
/* RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg);*/
}
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMPInitPCIeLinkCtrlValue(pAd);
#endif /* PCIE_PS_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
/*
To reduce connection time,
do auto reconnect here instead of waiting STAMlmePeriodicExec to do auto reconnect.
*/
if (pAd->OpMode == OPMODE_STA)
MlmeAutoReconnectLastSSID(pAd);
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
}
VOID RTMPDrvClose(
IN VOID *pAdSrc,
IN VOID *net_dev)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
BOOLEAN Cancelled;
UINT32 i = 0;
Cancelled = FALSE;
#ifdef CONFIG_STA_SUPPORT
#ifdef CREDENTIAL_STORE
if (pAd->IndicateMediaState == NdisMediaStateConnected)
{
StoreConnectInfo(pAd);
}
else
{
RTMP_SEM_LOCK(&pAd->StaCtIf.Lock);
pAd->StaCtIf.Changeable = FALSE;
RTMP_SEM_UNLOCK(&pAd->StaCtIf.Lock);
}
#endif /* CREDENTIAL_STORE */
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef PCIE_PS_SUPPORT
RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE);
#endif /* PCIE_PS_SUPPORT */
/* If dirver doesn't wake up firmware here,*/
/* NICLoadFirmware will hang forever when interface is up again.*/
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
{
AsicForceWakeup(pAd, TRUE);
}
#ifdef RTMP_MAC_PCI
pAd->bPCIclkOff = FALSE;
#endif /* RTMP_MAC_PCI */
}
#endif /* CONFIG_STA_SUPPORT */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
#ifdef EXT_BUILD_CHANNEL_LIST
if (pAd->CommonCfg.pChDesp != NULL)
os_free_mem(NULL, pAd->CommonCfg.pChDesp);
pAd->CommonCfg.pChDesp = NULL;
pAd->CommonCfg.DfsType = MAX_RD_REGION;
pAd->CommonCfg.bCountryFlag = 0;
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef WDS_SUPPORT
WdsDown(pAd);
#endif /* WDS_SUPPORT */
for (i = 0 ; i < NUM_OF_TX_RING; i++)
{
while (pAd->DeQueueRunning[i] == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i));
RTMPusecDelay(1000);
}
}
/* Stop Mlme state machine*/
MlmeHalt(pAd);
/* Close net tasklets*/
RtmpNetTaskExit(pAd);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
MacTableReset(pAd);
#if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT)
if (pAd->WOW_Cfg.bEnable == TRUE)
RT28xxUsbAsicWOWEnable(pAd);
else
#endif /* WOW_SUPPORT */
MlmeRadioOff(pAd);
}
#endif /* CONFIG_STA_SUPPORT */
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
#ifdef LED_CONTROL_SUPPORT
RTMPExitLEDMode(pAd);
#endif // LED_CONTROL_SUPPORT
/* Close kernel threads*/
RtmpMgmtTaskExit(pAd);
#ifdef RTMP_MAC_PCI
{
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
/* Receive packets to clear DMA index after disable interrupt. */
/*RTMPHandleRxDoneInterrupt(pAd);*/
/* put to radio off to save power when driver unload. After radiooff, can't write /read register. So need to finish all */
/* register access before Radio off.*/
#ifdef RTMP_PCI_SUPPORT
if (pAd->infType == RTMP_DEV_INF_PCI || pAd->infType == RTMP_DEV_INF_PCIE)
{
BOOLEAN brc;
brc=RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0);
/*In solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff*/
#ifdef PCIE_PS_SUPPORT
pAd->bPCIclkOff = FALSE;
#endif /* PCIE_PS_SUPPORT */
if (brc==FALSE)
{
DBGPRINT(RT_DEBUG_ERROR,("%s call RT28xxPciAsicRadioOff fail !!\n", __FUNCTION__));
}
}
#endif /* RTMP_PCI_SUPPORT */
}
#endif /* RTMP_MAC_PCI */
/* Free IRQ*/
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
#ifdef RTMP_MAC_PCI
/* Deregister interrupt function*/
RTMP_OS_IRQ_RELEASE(pAd, net_dev);
#endif /* RTMP_MAC_PCI */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
/* Free Ring or USB buffers*/
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
/* Free Ring or USB buffers*/
RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
#ifdef DOT11_N_SUPPORT
/* Free BA reorder resource*/
ba_reordering_resource_release(pAd);
#endif /* DOT11_N_SUPPORT */
UserCfgExit(pAd); /* must after ba_reordering_resource_release */
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
/*+++Modify by woody to solve the bulk fail+++*/
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
}
#endif /* CONFIG_STA_SUPPORT */
/* clear MAC table */
/* TODO: do not clear spin lock, such as fLastChangeAccordingMfbLock */
NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE));
/* release all timers */
RTMPusecDelay(2000);
RTMP_TimerListRelease(pAd);
#ifdef RTMP_TIMER_TASK_SUPPORT
NdisFreeSpinLock(&pAd->TimerQLock);
#endif /* RTMP_TIMER_TASK_SUPPORT */
}
VOID RTMPInfClose(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef PROFILE_STORE
WriteDatThread(pAd);
RTMPusecDelay(1000);
#endif /* PROFILE_STORE */
#ifdef QOS_DLS_SUPPORT
/* send DLS-TEAR_DOWN message, */
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
/* tear down local dls table entry*/
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
/* tear down peer dls table entry*/
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif /* QOS_DLS_SUPPORT */
if (INFRA_ON(pAd) &&
#if defined(WOW_SUPPORT) && defined(RTMP_MAC_USB) && defined(WOW_IFDOWN_SUPPORT) /* In WOW state, can't issue disassociation reqeust */
pAd->WOW_Cfg.bEnable == FALSE &&
#endif /* WOW_SUPPORT */
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
/* kfree(MsgElem);*/
os_free_mem(NULL, MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface down.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
if (pAd->StaCfg.pWpsProbeReqIe)
{
/* kfree(pAd->StaCfg.pWpsProbeReqIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpsProbeReqIe);
pAd->StaCfg.pWpsProbeReqIe = NULL;
pAd->StaCfg.WpsProbeReqIeLen = 0;
}
if (pAd->StaCfg.pWpaAssocIe)
{
/* kfree(pAd->StaCfg.pWpaAssocIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpaAssocIe);
pAd->StaCfg.pWpaAssocIe = NULL;
pAd->StaCfg.WpaAssocIeLen = 0;
}
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
}
PNET_DEV RtmpPhyNetDevMainCreate(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
PNET_DEV pDevNew;
UINT32 MC_RowID = 0, IoctlIF = 0;
pAd = pAd;
#ifdef MULTIPLE_CARD_SUPPORT
MC_RowID = pAd->MC_RowID;
#endif /* MULTIPLE_CARD_SUPPORT */
#ifdef HOSTAPD_SUPPORT
IoctlIF = pAd->IoctlIF;
#endif /* HOSTAPD_SUPPORT */
pDevNew = RtmpOSNetDevCreate((INT32)MC_RowID, (UINT32 *)&IoctlIF,
INT_MAIN, 0, sizeof(PRTMP_ADAPTER), INF_MAIN_DEV_NAME);
#ifdef HOSTAPD_SUPPORT
pAd->IoctlIF = IoctlIF;
#endif /* HOSTAPD_SUPPORT */
return pDevNew;
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
RTMP_ADAPTER *pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
BOOLEAN Cancelled;
#ifdef QOS_DLS_SUPPORT
// send DLS-TEAR_DOWN message,
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
// tear down local dls table entry
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
// tear down peer dls table entry
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif // QOS_DLS_SUPPORT //
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
// Prevent to connect AP again in STAMlmePeriodicExec
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface down.
RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; // close ok
}
VOID RTMPInfClose(
IN VOID *pAdSrc)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef PROFILE_STORE
WriteDatThread(pAd);
RTMPusecDelay(1000);
#endif /* PROFILE_STORE */
#ifdef QOS_DLS_SUPPORT
/* send DLS-TEAR_DOWN message, */
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
/* tear down local dls table entry*/
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
/* tear down peer dls table entry*/
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif /* QOS_DLS_SUPPORT */
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
/* kfree(MsgElem);*/
os_free_mem(NULL, MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface down.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
if (pAd->StaCfg.pWpsProbeReqIe)
{
/* kfree(pAd->StaCfg.pWpsProbeReqIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpsProbeReqIe);
pAd->StaCfg.pWpsProbeReqIe = NULL;
pAd->StaCfg.WpsProbeReqIeLen = 0;
}
if (pAd->StaCfg.pWpaAssocIe)
{
/* kfree(pAd->StaCfg.pWpaAssocIe);*/
os_free_mem(NULL, pAd->StaCfg.pWpaAssocIe);
pAd->StaCfg.pWpaAssocIe = NULL;
pAd->StaCfg.WpaAssocIeLen = 0;
}
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
}
/*
==========================================================================
Description:
IRQL = DISPATCH_LEVEL
==========================================================================
*/
VOID PeerDeauthAction(
IN PRTMP_ADAPTER pAd,
IN PMLME_QUEUE_ELEM Elem)
{
UCHAR Addr1[MAC_ADDR_LEN];
UCHAR Addr2[MAC_ADDR_LEN];
UCHAR Addr3[MAC_ADDR_LEN];
USHORT Reason;
BOOLEAN bDoIterate = FALSE;
if (PeerDeauthSanity
(pAd, Elem->Msg, Elem->MsgLen, Addr1, Addr2, Addr3, &Reason)) {
if (INFRA_ON(pAd)
&& (MAC_ADDR_EQUAL(Addr1, pAd->CurrentAddress)
|| MAC_ADDR_EQUAL(Addr1, BROADCAST_ADDR))
&& MAC_ADDR_EQUAL(Addr2, pAd->CommonCfg.Bssid)
&& MAC_ADDR_EQUAL(Addr3, pAd->CommonCfg.Bssid)
) {
DBGPRINT(RT_DEBUG_TRACE,
("AUTH_RSP - receive DE-AUTH from our AP (Reason=%d)\n",
Reason));
if (Reason == REASON_4_WAY_TIMEOUT)
RTMPSendWirelessEvent(pAd,
IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG,
NULL, 0, 0);
if (Reason == REASON_GROUP_KEY_HS_TIMEOUT)
RTMPSendWirelessEvent(pAd,
IW_GROUP_HS_TIMEOUT_EVENT_FLAG,
NULL, 0, 0);
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
RtmpOSWrielessEventSend(pAd->net_dev,
RT_WLAN_EVENT_CGIWAP, -1, NULL,
NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
/* send wireless event - for deauthentication */
RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, NULL,
BSS0, 0);
#ifdef WPA_SUPPLICANT_SUPPORT
if ((pAd->StaCfg.WpaSupplicantUP !=
WPA_SUPPLICANT_DISABLE)
&& (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2)
&& (pAd->StaCfg.PortSecured ==
WPA_802_1X_PORT_SECURED))
pAd->StaCfg.bLostAp = TRUE;
#endif /* WPA_SUPPLICANT_SUPPORT */
/*
Some customer would set AP1 & AP2 same SSID, AuthMode & EncrypType but different WPAPSK,
therefore we need to do iterate here.
*/
if ((pAd->StaCfg.PortSecured ==
WPA_802_1X_PORT_NOT_SECURED)
&&
((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
|| (pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeWPA2PSK))
)
bDoIterate = TRUE;
LinkDown(pAd, TRUE);
if (bDoIterate) {
pAd->MlmeAux.BssIdx++;
IterateOnBssTab(pAd);
}
}
} else {
DBGPRINT(RT_DEBUG_TRACE,
("AUTH_RSP - PeerDeauthAction() sanity check fail\n"));
}
}
/*
==========================================================================
Description:
Upper layer issues disassoc request
Parameters:
Elem -
==========================================================================
*/
static VOID ApCliMlmeDisassocReqAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
PMLME_DISASSOC_REQ_STRUCT pDisassocReq;
HEADER_802_11 DisassocHdr;
PUCHAR pOutBuffer = NULL;
ULONG FrameLen = 0;
NDIS_STATUS NStatus;
APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
USHORT ifIndex = (USHORT)(Elem->Priv);
PULONG pCurrState = NULL;
#ifdef MAC_REPEATER_SUPPORT
UCHAR CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */
if ((ifIndex >= MAX_APCLI_NUM)
#ifdef MAC_REPEATER_SUPPORT
&& (ifIndex < 64)
#endif /* MAC_REPEATER_SUPPORT */
)
return;
#ifdef MAC_REPEATER_SUPPORT
if (ifIndex >= 64)
{
CliIdx = ((ifIndex - 64) % 16);
ifIndex = ((ifIndex - 64) / 16);
pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].RepeaterCli[CliIdx].AssocCurrState;
}
else
#endif /* MAC_REPEATER_SUPPORT */
pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].AssocCurrState;
/* skip sanity check */
pDisassocReq = (PMLME_DISASSOC_REQ_STRUCT)(Elem->Msg);
/* allocate and send out DeassocReq frame */
NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); /*Get an unused nonpaged memory */
if (NStatus != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - ApCliMlmeDisassocReqAction() allocate memory failed\n"));
*pCurrState = APCLI_ASSOC_IDLE;
ApCliCtrlMsg.Status = MLME_FAIL_NO_RESOURCE;
#ifdef MAC_REPEATER_SUPPORT
ApCliCtrlMsg.BssIdx = ifIndex;
ApCliCtrlMsg.CliIdx = CliIdx;
ifIndex = (USHORT)(Elem->Priv);
#endif /* MAC_REPEATER_SUPPORT */
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_DEASSOC_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
return;
}
DBGPRINT(RT_DEBUG_TRACE, ("APCLI_ASSOC - Send DISASSOC request [BSSID::%02x:%02x:%02x:%02x:%02x:%02x] \n",
pDisassocReq->Addr[0], pDisassocReq->Addr[1], pDisassocReq->Addr[2],
pDisassocReq->Addr[3], pDisassocReq->Addr[4], pDisassocReq->Addr[5]));
ApCliMgtMacHeaderInit(pAd, &DisassocHdr, SUBTYPE_DISASSOC, 0, pDisassocReq->Addr, pDisassocReq->Addr, ifIndex);
#ifdef MAC_REPEATER_SUPPORT
if (CliIdx != 0xFF)
{
COPY_MAC_ADDR(DisassocHdr.Addr2, pAd->ApCfg.ApCliTab[ifIndex].RepeaterCli[CliIdx].CurrentAddress);
}
#endif /* MAC_REPEATER_SUPPORT */
MakeOutgoingFrame(pOutBuffer, &FrameLen,
sizeof(HEADER_802_11), &DisassocHdr,
2, &pDisassocReq->Reason,
END_OF_ARGS);
MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
MlmeFreeMemory(pAd, pOutBuffer);
*pCurrState = APCLI_ASSOC_IDLE;
ApCliCtrlMsg.Status = MLME_SUCCESS;
#ifdef MAC_REPEATER_SUPPORT
ApCliCtrlMsg.BssIdx = ifIndex;
ApCliCtrlMsg.CliIdx = CliIdx;
ifIndex = (USHORT)(Elem->Priv);
#endif /* MAC_REPEATER_SUPPORT */
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_DEASSOC_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
#ifdef APCLI_WPA_SUPPLICANT_SUPPORT
if (pAd->ApCfg.ApCliTab[ifIndex].WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
{
/*send disassociate event to wpa_supplicant*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_DISASSOC_EVENT_FLAG, NULL, NULL, 0);
}
RtmpOSWrielessEventSend(pAd->net_dev, SIOCGIWAP, -1, NULL, NULL, 0);
RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, NULL, BSS0, 0);
#endif /*APCLI_WPA_SUPPLICANT_SUPPORT*/
return;
}
RTMP_BUILD_DRV_OPS_FUNCTION_BODY
#endif /* OS_ABL_FUNC_SUPPORT */
#endif /* LINUX */
int rt28xx_init(
IN VOID *pAdSrc,
IN PSTRING pDefaultMac,
IN PSTRING pHostName)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
UINT index;
UCHAR TmpPhy;
NDIS_STATUS Status;
UINT32 MacCsr0 = 0;
if (pAd == NULL)
return FALSE;
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
/* If dirver doesn't wake up firmware here,*/
/* NICLoadFirmware will hang forever when interface is up again.*/
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
AUTO_WAKEUP_STRUC AutoWakeupCfg;
AsicForceWakeup(pAd, TRUE);
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
}
}
#endif /* PCIE_PS_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
/* reset Adapter flags*/
RTMP_CLEAR_FLAGS(pAd);
/* Init BssTab & ChannelInfo tabbles for auto channel select.*/
#ifdef DOT11_N_SUPPORT
/* Allocate BA Reordering memory*/
if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE)
goto err1;
#endif /* DOT11_N_SUPPORT */
/* Make sure MAC gets ready.*/
index = 0;
do
{
RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
pAd->MACVersion = MacCsr0;
if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF))
break;
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
goto err1;
RTMPusecDelay(10);
} while (index++ < 100);
DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
RtmpChipOpsHook(pAd);
if (MAX_LEN_OF_MAC_TABLE > MAX_AVAILABLE_CLIENT_WCID(pAd))
{
DBGPRINT(RT_DEBUG_ERROR, ("MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!\n"));
goto err1;
}
/* Disable DMA*/
RT28XXDMADisable(pAd);
/* Load 8051 firmware*/
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
goto err1;
}
NICLoadRateSwitchingParams(pAd);
/* Disable interrupts here which is as soon as possible*/
/* This statement should never be true. We might consider to remove it later*/
#ifdef RESOURCE_PRE_ALLOC
Status = RTMPInitTxRxRingMemory(pAd);
#else
Status = RTMPAllocTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status));
goto err2;
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
/* initialize MLME*/
Status = RtmpMgmtTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
Status = MlmeInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
goto err4;
}
#ifdef RMTP_RBUS_SUPPORT
#ifdef VIDEO_TURBINE_SUPPORT
VideoConfigInit(pAd);
#endif /* VIDEO_TURBINE_SUPPORT */
#endif /* RMTP_RBUS_SUPPORT */
/* Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default*/
UserCfgInit(pAd);
Status = RtmpNetTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err5;
/* COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);*/
/* pAd->bForcePrintTX = TRUE;*/
CfgInitHook(pAd);
#ifdef BLOCK_NET_IF
initblockQueueTab(pAd);
#endif /* BLOCK_NET_IF */
Status = MeasureReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
Status = TpcReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
/* Init the hardware, we need to init asic before read registry, otherwise mac register will be reset*/
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
if (Status != NDIS_STATUS_SUCCESS)
goto err6;
}
/* Read parameters from Config File */
/* unknown, it will be updated in NICReadEEPROMParameters */
pAd->RfIcType = RFIC_UNKNOWN;
Status = RTMPReadParametersHook(pAd);
DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status));
goto err6;
}
#ifdef RTMP_MAC_USB
pAd->CommonCfg.bMultipleIRP = FALSE;
if (pAd->CommonCfg.bMultipleIRP)
pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
else
pAd->CommonCfg.NumOfBulkInIRP = 1;
#endif /* RTMP_MAC_USB */
#ifdef DOT11_N_SUPPORT
/*Init Ba Capability parameters.*/
/* RT28XX_BA_INIT(pAd);*/
pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
/* UPdata to HT IE*/
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
#endif /* DOT11_N_SUPPORT */
/* after reading Registry, we now know if in AP mode or STA mode*/
/* Load 8051 firmware; crash when FW image not existent*/
/* Status = NICLoadFirmware(pAd);*/
/* if (Status != NDIS_STATUS_SUCCESS)*/
/* break;*/
DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
/* We should read EEPROM for all cases. rt2860b*/
NICReadEEPROMParameters(pAd, (PSTRING)pDefaultMac);
#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
NICInitAsicFromEEPROM(pAd); /*rt2860b*/
#ifdef CONFIG_STA_SUPPORT
#ifdef RTMP_FREQ_CALIBRATION_SUPPORT
/* if (IS_RT3593(pAd))*/
/* {*/
/* Initialize the frequency calibration*/
RTMP_CHIP_ASIC_FREQ_CAL_INIT(pAd);
/* }*/
#endif /* RTMP_FREQ_CALIBRATION_SUPPORT */
#endif /* CONFIG_STA_SUPPORT */
#ifdef RTMP_INTERNAL_TX_ALC
/* Initialize the desired TSSI table*/
RTMP_CHIP_ASIC_TSSI_TABLE_INIT(pAd);
#endif /* RTMP_INTERNAL_TX_ALC */
#ifdef RTMP_TEMPERATURE_COMPENSATION
/* Temperature compensation, initialize the lookup table */
DBGPRINT(RT_DEBUG_ERROR, ("IS_RT5392 = %d, bAutoTxAgcG = %d\n", IS_RT5392(pAd), pAd->bAutoTxAgcG));
if (IS_RT5392(pAd) && pAd->bAutoTxAgcG && pAd->CommonCfg.TempComp != 0)
{
InitLookupTable(pAd);
}
#endif /* RTMP_TEMPERATURE_COMPENSATION */
/* Set PHY to appropriate mode*/
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
#endif /* DOT11_N_SUPPORT */
/* No valid channels.*/
if (pAd->ChannelListNum == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
goto err6;
}
#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]));
#endif /* DOT11_N_SUPPORT */
/* APInitialize(pAd);*/
#ifdef IKANOS_VX_1X0
VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif /* IKANOS_VX_1X0 */
#ifdef RTMP_MAC_USB
AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
RTMPusecDelay(10000);
#endif /* RTMP_MAC_USB */
/*
Some modules init must be called before APStartUp().
Or APStartUp() will make up beacon content and call
other modules API to get some information to fill.
*/
if (pAd && (Status != NDIS_STATUS_SUCCESS))
{
/* Undo everything if it failed*/
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
/* NdisMDeregisterInterrupt(&pAd->Interrupt);*/
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
/* RTMPFreeAdapter(pAd); we will free it in disconnect()*/
}
else if (pAd)
{
/* Microsoft HCT require driver send a disconnect event after driver initialization.*/
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
OPSTATUS_CLEAR_FLAG(pAd, fOP_AP_STATUS_MEDIA_STATE_CONNECTED);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
#ifdef RTMP_MAC_USB
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
/* Support multiple BulkIn IRP,*/
/* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.*/
for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
{
RTUSBBulkReceive(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
}
#endif /* RTMP_MAC_USB */
}/* end of else*/
/* Set up the Mac address*/
#ifdef CONFIG_STA_SUPPORT
RtmpOSNetDevAddrSet(pAd->OpMode, pAd->net_dev, &pAd->CurrentAddress[0], (PUCHAR)(pAd->StaCfg.dev_name));
#endif /* CONFIG_STA_SUPPORT */
/* Various AP function init*/
/* assign function pointers*/
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
/* send wireless event to wpa_supplicant for infroming interface up.*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM, RT_INTERFACE_UP, NULL, NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
#endif /* WPA_SUPPLICANT_SUPPORT */
}
#endif /* CONFIG_STA_SUPPORT */
RTMP_CHIP_SPECIFIC(pAd, RTMP_CHIP_SPEC_STATE_INIT,
RTMP_CHIP_SPEC_INITIALIZATION, NULL, 0);
DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
return TRUE;
err6:
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
err5:
RtmpNetTaskExit(pAd);
UserCfgExit(pAd);
err4:
MlmeHalt(pAd);
err3:
RtmpMgmtTaskExit(pAd);
err2:
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
RTMPFreeTxRxRingMemory(pAd);
#endif /* RESOURCE_PRE_ALLOC */
err1:
#ifdef DOT11_N_SUPPORT
if(pAd->mpdu_blk_pool.mem)
os_free_mem(pAd, pAd->mpdu_blk_pool.mem); /* free BA pool*/
#endif /* DOT11_N_SUPPORT */
/* shall not set priv to NULL here because the priv didn't been free yet.*/
/*net_dev->priv = 0;*/
#ifdef INF_AMAZON_SE
err0:
#endif /* INF_AMAZON_SE */
#ifdef ST
err0:
#endif /* ST */
DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
return FALSE;
}
INT RTMP_COM_IoctlHandle(
IN VOID *pAdSrc,
IN RTMP_IOCTL_INPUT_STRUCT *wrq,
IN INT cmd,
IN USHORT subcmd,
IN VOID *pData,
IN ULONG Data)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
INT Status = NDIS_STATUS_SUCCESS, i;
UCHAR PermanentAddress[MAC_ADDR_LEN];
USHORT Addr01, Addr23, Addr45;
pObj = pObj; /* avoid compile warning */
switch(cmd)
{
case CMD_RTPRIV_IOCTL_NETDEV_GET:
/* get main net_dev */
{
VOID **ppNetDev = (VOID **)pData;
*ppNetDev = (VOID *)(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_NETDEV_SET:
/* set main net_dev */
pAd->net_dev = pData;
break;
case CMD_RTPRIV_IOCTL_OPMODE_GET:
/* get Operation Mode */
*(ULONG *)pData = pAd->OpMode;
break;
case CMD_RTPRIV_IOCTL_TASK_LIST_GET:
/* get all Tasks */
{
RT_CMD_WAIT_QUEUE_LIST *pList = (RT_CMD_WAIT_QUEUE_LIST *)pData;
pList->pMlmeTask = &pAd->mlmeTask;
#ifdef RTMP_TIMER_TASK_SUPPORT
pList->pTimerTask = &pAd->timerTask;
#endif /* RTMP_TIMER_TASK_SUPPORT */
pList->pCmdQTask = &pAd->cmdQTask;
}
break;
case CMD_RTPRIV_IOCTL_IRQ_INIT:
/* init IRQ */
RTMP_IRQ_INIT(pAd);
break;
case CMD_RTPRIV_IOCTL_IRQ_RELEASE:
/* release IRQ */
RTMP_OS_IRQ_RELEASE(pAd, pAd->net_dev);
break;
#ifdef RTMP_MAC_PCI
case CMD_RTPRIV_IOCTL_MSI_ENABLE:
/* enable MSI */
RTMP_MSI_ENABLE(pAd);
*(ULONG **)pData = (ULONG *)(pObj->pci_dev);
break;
#endif /* RTMP_MAC_PCI */
case CMD_RTPRIV_IOCTL_NIC_NOT_EXIST:
/* set driver state to fRTMP_ADAPTER_NIC_NOT_EXIST */
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
break;
#ifdef CONFIG_APSTA_MIXED_SUPPORT
case CMD_RTPRIV_IOCTL_MAX_IN_BIT:
/* set MAX_IN_BIT for WMM */
CW_MAX_IN_BITS = Data;
break;
#endif /* CONFIG_APSTA_MIXED_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
case CMD_RTPRIV_IOCTL_USB_DEV_GET:
/* get USB DEV */
{
VOID **ppUsb_Dev = (VOID **)pData;
*ppUsb_Dev = (VOID *)(pObj->pUsb_Dev);
}
break;
case CMD_RTPRIV_IOCTL_USB_INTF_GET:
/* get USB INTF */
{
VOID **ppINTF = (VOID **)pData;
*ppINTF = (VOID *)(pObj->intf);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_SET:
/* set driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_SET_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_CLEAR:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
RTMP_CLEAR_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SEND_DISSASSOCIATE:
/* clear driver state to fRTMP_ADAPTER_SUSPEND */
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem;/* = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);*/
os_alloc_mem(NULL, (UCHAR **)&MsgElem, sizeof(MLME_QUEUE_ELEM));
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
/* Prevent to connect AP again in STAMlmePeriodicExec*/
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);/* kfree(MsgElem);*/
os_free_mem(NULL, MsgElem);
}
/* RTMPusecDelay(1000);*/
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CGIWAP, -1, NULL, NULL, 0);
}
break;
case CMD_RTPRIV_IOCTL_ADAPTER_SUSPEND_TEST:
/* test driver state to fRTMP_ADAPTER_SUSPEND */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_SUSPEND);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_IDLE_RADIO_OFF_TEST:
/* test driver state to fRTMP_ADAPTER_IDLE_RADIO_OFF */
*(UCHAR *)pData = RTMP_TEST_FLAG(pAd,fRTMP_ADAPTER_IDLE_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_OFF:
/* RT28xxUsbAsicRadioOff */
RT28xxUsbAsicRadioOff(pAd);
break;
case CMD_RTPRIV_IOCTL_ADAPTER_RT28XX_USB_ASICRADIO_ON:
/* RT28xxUsbAsicRadioOn */
RT28xxUsbAsicRadioOn(pAd);
break;
#ifdef WOW_SUPPORT
#endif /* WOW_SUPPORT */
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */
case CMD_RTPRIV_IOCTL_AP_BSSID_GET:
if (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)
NdisCopyMemory(pData, pAd->MlmeAux.Bssid, 6);
else
return NDIS_STATUS_FAILURE;
break;
#endif /* CONFIG_STA_SUPPORT */
case CMD_RTPRIV_IOCTL_SANITY_CHECK:
/* sanity check before IOCTL */
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
#ifdef IFUP_IN_PROBE
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
|| (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
#endif /* IFUP_IN_PROBE */
)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_SIOCGIWFREQ:
/* get channel number */
*(ULONG *)pData = pAd->CommonCfg.Channel;
break;
case CMD_RTPRIV_IOCTL_BEACON_UPDATE:
/* update all beacon contents */
break;
case CMD_RTPRIV_IOCTL_RXPATH_GET:
/* get the number of rx path */
*(ULONG *)pData = pAd->Antenna.field.RxPath;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_NUM_GET:
*(ULONG *)pData = pAd->ChannelListNum;
break;
case CMD_RTPRIV_IOCTL_CHAN_LIST_GET:
{
UINT32 i;
UCHAR *pChannel = (UCHAR *)pData;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
*pChannel = pAd->ChannelList[i-1].Channel;
pChannel ++;
}
}
break;
case CMD_RTPRIV_IOCTL_FREQ_LIST_GET:
{
UINT32 i;
UINT32 *pFreq = (UINT32 *)pData;
UINT32 m;
for (i = 1; i <= pAd->ChannelListNum; i++)
{
m = 2412000;
MAP_CHANNEL_ID_TO_KHZ(pAd->ChannelList[i-1].Channel, m);
(*pFreq) = m;
pFreq ++;
}
}
break;
#ifdef RTMP_PCI_SUPPORT
case CMD_RTPRIV_IOCTL_PCI_SUSPEND:
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_PCI_RESUME:
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
break;
case CMD_RTPRIV_IOCTL_PCI_CSR_SET:
pAd->CSRBaseAddress = (PUCHAR)Data;
DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG)pAd->CSRBaseAddress, (ULONG)Data));
break;
case CMD_RTPRIV_IOCTL_PCIE_INIT:
RTMPInitPCIeDevice(pData, pAd);
break;
#endif /* RTMP_PCI_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
case CMD_RTPRIV_IOCTL_CFG80211_CFG_START:
RT_CFG80211_REINIT(pAd);
RT_CFG80211_CRDA_REG_RULE_APPLY(pAd);
break;
#endif /* RT_CFG80211_SUPPORT */
#ifdef INF_PPA_SUPPORT
case CMD_RTPRIV_IOCTL_INF_PPA_INIT:
os_alloc_mem(NULL, (UCHAR **)&(pAd->pDirectpathCb), sizeof(PPA_DIRECTPATH_CB));
break;
case CMD_RTPRIV_IOCTL_INF_PPA_EXIT:
if (ppa_hook_directpath_register_dev_fn && pAd->PPAEnable==TRUE)
{
UINT status;
status=ppa_hook_directpath_register_dev_fn(&pAd->g_if_id, pAd->net_dev, NULL, 0);
DBGPRINT(RT_DEBUG_TRACE, ("unregister PPA:g_if_id=%d status=%d\n",pAd->g_if_id,status));
}
os_free_mem(NULL, pAd->pDirectpathCb);
break;
#endif /* INF_PPA_SUPPORT*/
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP:
/* interface up */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
if (VIRTUAL_IF_NUM(pAd) == 0)
{
if (pInfConf->rt28xx_open(pAd->net_dev) != 0)
{
DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_open return fail!\n"));
return NDIS_STATUS_FAILURE;
}
}
else
{
}
VIRTUAL_IF_INC(pAd);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN:
/* interface down */
{
RT_CMD_INF_UP_DOWN *pInfConf = (RT_CMD_INF_UP_DOWN *)pData;
VIRTUAL_IF_DEC(pAd);
if (VIRTUAL_IF_NUM(pAd) == 0)
pInfConf->rt28xx_close(pAd->net_dev);
}
break;
case CMD_RTPRIV_IOCTL_VIRTUAL_INF_GET:
/* get virtual interface number */
*(ULONG *)pData = VIRTUAL_IF_NUM(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_TYPE_GET:
/* get current interface type */
*(ULONG *)pData = pAd->infType;
break;
case CMD_RTPRIV_IOCTL_INF_STATS_GET:
/* get statistics */
{
RT_CMD_STATS *pStats = (RT_CMD_STATS *)pData;
pStats->pStats = pAd->stats;
pStats->rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
pStats->tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
pStats->rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
pStats->tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
pStats->rx_errors = pAd->Counters8023.RxErrors;
pStats->tx_errors = pAd->Counters8023.TxErrors;
pStats->multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received*/
pStats->collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; /* Collision packets*/
pStats->rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow*/
pStats->rx_crc_errors = 0;/*pAd->WlanCounters.FCSErrorCount; recved pkt with crc error*/
pStats->rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; /* recv'd frame alignment error*/
pStats->rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun*/
}
break;
case CMD_RTPRIV_IOCTL_INF_IW_STATUS_GET:
/* get wireless statistics */
{
UCHAR CurOpMode = OPMODE_AP;
RT_CMD_IW_STATS *pStats = (RT_CMD_IW_STATS *)pData;
pStats->qual = 0;
pStats->level = 0;
pStats->noise = 0;
pStats->pStats = pAd->iw_stats;
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA)
{
CurOpMode = OPMODE_STA;
}
#endif /* CONFIG_STA_SUPPORT */
/*check if the interface is down*/
if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
return NDIS_STATUS_FAILURE;
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
pStats->qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
#endif /* CONFIG_STA_SUPPORT */
if (pStats->qual > 100)
pStats->qual = 100;
#ifdef CONFIG_STA_SUPPORT
if (CurOpMode == OPMODE_STA)
{
pStats->level =
RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2);
}
#endif /* CONFIG_STA_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
pStats->noise = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.AvgRssi0,
pAd->StaCfg.RssiSample.AvgRssi1,
pAd->StaCfg.RssiSample.AvgRssi2) -
RTMPMinSnr(pAd, pAd->StaCfg.RssiSample.AvgSnr0,
pAd->StaCfg.RssiSample.AvgSnr1);
#endif /* CONFIG_STA_SUPPORT */
}
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CREATE:
*(VOID **)pData = RtmpPhyNetDevMainCreate(pAd);
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_ID_GET:
*(ULONG *)pData = INT_MAIN;
break;
case CMD_RTPRIV_IOCTL_INF_MAIN_CHECK:
if (Data != INT_MAIN)
return NDIS_STATUS_FAILURE;
break;
case CMD_RTPRIV_IOCTL_INF_P2P_CHECK:
if (Data != INT_P2P)
return NDIS_STATUS_FAILURE;
break;
#ifdef WDS_SUPPORT
case CMD_RTPRIV_IOCTL_WDS_INIT:
WDS_Init(pAd, pData);
break;
case CMD_RTPRIV_IOCTL_WDS_REMOVE:
WDS_Remove(pAd);
break;
case CMD_RTPRIV_IOCTL_WDS_STATS_GET:
if (Data == INT_WDS)
{
if (WDS_StatsGet(pAd, pData) != TRUE)
return NDIS_STATUS_FAILURE;
}
else
return NDIS_STATUS_FAILURE;
break;
#endif /* WDS_SUPPORT */
#ifdef RALINK_ATE
#ifdef RALINK_QA
case CMD_RTPRIV_IOCTL_ATE:
RtmpDoAte(pAd, wrq, pData);
break;
#endif /* RALINK_QA */
#endif /* RALINK_ATE */
case CMD_RTPRIV_IOCTL_MAC_ADDR_GET:
RT28xx_EEPROM_READ16(pAd, 0x04, Addr01);
RT28xx_EEPROM_READ16(pAd, 0x06, Addr23);
RT28xx_EEPROM_READ16(pAd, 0x08, Addr45);
PermanentAddress[0] = (UCHAR)(Addr01 & 0xff);
PermanentAddress[1] = (UCHAR)(Addr01 >> 8);
PermanentAddress[2] = (UCHAR)(Addr23 & 0xff);
PermanentAddress[3] = (UCHAR)(Addr23 >> 8);
PermanentAddress[4] = (UCHAR)(Addr45 & 0xff);
PermanentAddress[5] = (UCHAR)(Addr45 >> 8);
for(i=0; i<6; i++)
*(UCHAR *)(pData+i) = PermanentAddress[i];
break;
case CMD_RTPRIV_IOCTL_SIOCGIWNAME:
RtmpIoctl_rt_ioctl_giwname(pAd, pData, 0);
break;
}
#ifdef RT_CFG80211_SUPPORT
if ((CMD_RTPRIV_IOCTL_80211_START <= cmd) &&
(cmd <= CMD_RTPRIV_IOCTL_80211_END))
{
CFG80211DRV_IoctlHandle(pAd, wrq, cmd, subcmd, pData, Data);
}
#endif /* RT_CFG80211_SUPPORT */
if (cmd >= CMD_RTPRIV_IOCTL_80211_COM_LATEST_ONE)
return NDIS_STATUS_FAILURE;
return Status;
}
/*
==========================================================================
Description:
Scan next channel
==========================================================================
*/
VOID ScanNextChannel(
IN PRTMP_ADAPTER pAd)
{
HEADER_802_11 Hdr80211;
PUCHAR pOutBuffer = NULL;
NDIS_STATUS NStatus;
ULONG FrameLen = 0;
UCHAR SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
#ifdef CONFIG_STA_SUPPORT
USHORT Status;
#endif // CONFIG_STA_SUPPORT //
UINT ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
BOOLEAN ScanPending = FALSE;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (MONITOR_ON(pAd))
return;
}
ScanPending = ((pAd->StaCfg.bImprovedScan) && (pAd->StaCfg.ScanChannelCnt>=7));
#endif // CONFIG_STA_SUPPORT //
#ifdef RALINK_ATE
// Nothing to do in ATE mode.
if (ATE_ON(pAd))
return;
#endif // RALINK_ATE //
if ((pAd->MlmeAux.Channel == 0) || ScanPending)
{
if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
#ifdef CONFIG_STA_SUPPORT
&& (INFRA_ON(pAd) || ADHOC_ON(pAd)
|| (pAd->OpMode == OPMODE_AP))
#endif // CONFIG_STA_SUPPORT //
)
{
AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
BBPValue &= (~0x18);
BBPValue |= 0x10;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
}
else
{
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
/*
If all peer Ad-hoc clients leave, driver would do LinkDown and LinkUp.
In LinkUp, CommonCfg.Ssid would copy SSID from MlmeAux.
To prevent SSID is zero or wrong in Beacon, need to recover MlmeAux.SSID here.
*/
if (ADHOC_ON(pAd))
{
NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen;
NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen);
}
//
// To prevent data lost.
// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
// Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done
//
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && (INFRA_ON(pAd)))
{
RTMPSendNullFrame(pAd,
pAd->CommonCfg.TxRate,
(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) ? TRUE:FALSE));
DBGPRINT(RT_DEBUG_TRACE, ("%s -- Send PSM Data frame\n", __FUNCTION__));
}
// keep the latest scan channel, could be 0 for scan complete, or other channel
pAd->StaCfg.LastScanChannel = pAd->MlmeAux.Channel;
pAd->StaCfg.ScanChannelCnt = 0;
// Suspend scanning and Resume TxData for Fast Scanning
if ((pAd->MlmeAux.Channel != 0) &&
(pAd->StaCfg.bImprovedScan)) // it is scan pending
{
pAd->Mlme.SyncMachine.CurrState = SCAN_PENDING;
Status = MLME_SUCCESS;
DBGPRINT(RT_DEBUG_WARN, ("bFastRoamingScan ~~~~~~~~~~~~~ Get back to send data ~~~~~~~~~~~~~\n"));
RTMPResumeMsduTransmission(pAd);
}
else
{
pAd->StaCfg.BssNr = pAd->ScanTab.BssNr;
pAd->StaCfg.bImprovedScan = FALSE;
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
Status = MLME_SUCCESS;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status, 0);
RTMPSendWirelessEvent(pAd, IW_SCAN_COMPLETED_EVENT_FLAG, NULL, BSS0, 0);
#ifdef WPA_SUPPLICANT_SUPPORT
RtmpOSWrielessEventSend(pAd, SIOCGIWSCAN, -1, NULL, NULL, 0);
#endif // WPA_SUPPLICANT_SUPPORT //
}
#ifdef LINUX
#ifdef RT_CFG80211_SUPPORT
RTEnqueueInternalCmd(pAd, CMDTHREAD_SCAN_END, NULL, 0);
#endif // RT_CFG80211_SUPPORT //
#endif // LINUX //
}
#endif // CONFIG_STA_SUPPORT //
}
else
{
int rt28xx_init(
IN PRTMP_ADAPTER pAd,
IN PSTRING pDefaultMac,
IN PSTRING pHostName)
{
UINT index;
UCHAR TmpPhy;
NDIS_STATUS Status;
UINT32 MacCsr0 = 0;
#ifdef CONFIG_STA_SUPPORT
#ifdef PCIE_PS_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// If dirver doesn't wake up firmware here,
// NICLoadFirmware will hang forever when interface is up again.
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) &&
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
AUTO_WAKEUP_STRUC AutoWakeupCfg;
AsicForceWakeup(pAd, TRUE);
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
}
}
#endif // PCIE_PS_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
// reset Adapter flags
RTMP_CLEAR_FLAGS(pAd);
// Init BssTab & ChannelInfo tabbles for auto channel select.
#ifdef DOT11_N_SUPPORT
// Allocate BA Reordering memory
if (ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM) != TRUE)
goto err1;
#endif // DOT11_N_SUPPORT //
// Make sure MAC gets ready.
index = 0;
do
{
RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
pAd->MACVersion = MacCsr0;
if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF))
break;
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
goto err1;
RTMPusecDelay(10);
} while (index++ < 100);
DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
#ifdef RTMP_MAC_PCI
#if defined(RT3090) || defined(RT3592) || defined(RT3390) || defined(RT3593)
/*Iverson patch PCIE L1 issue to make sure that driver can be read,write ,BBP and RF register at pcie L.1 level */
if ((IS_RT3090(pAd) || IS_RT3572(pAd) ||
IS_RT3390(pAd) || IS_RT3593(pAd))&&pAd->infType==RTMP_DEV_INF_PCIE)
{
RTMP_IO_READ32(pAd, AUX_CTRL, &MacCsr0);
MacCsr0 |= 0x402;
RTMP_IO_WRITE32(pAd, AUX_CTRL, MacCsr0);
DBGPRINT(RT_DEBUG_TRACE, ("AUX_CTRL = 0x%x\n", MacCsr0));
}
#endif // RT3090 //
// To fix driver disable/enable hang issue when radio off
RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x2);
#endif // RTMP_MAC_PCI //
// Disable DMA
RT28XXDMADisable(pAd);
// Load 8051 firmware
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
goto err1;
}
NICLoadRateSwitchingParams(pAd);
// Disable interrupts here which is as soon as possible
// This statement should never be true. We might consider to remove it later
#ifdef RTMP_MAC_PCI
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
RTMP_ASIC_INTERRUPT_DISABLE(pAd);
}
#endif // RTMP_MAC_PCI //
#ifdef RESOURCE_PRE_ALLOC
Status = RTMPInitTxRxRingMemory(pAd);
#else
Status = RTMPAllocTxRxRingMemory(pAd);
#endif // RESOURCE_PRE_ALLOC //
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPAllocTxRxMemory failed, Status[=0x%08x]\n", Status));
goto err2;
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
// initialize MLME
//
Status = RtmpMgmtTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err3;
Status = MlmeInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
goto err4;
}
#ifdef RMTP_RBUS_SUPPORT
#ifdef VIDEO_TURBINE_SUPPORT
VideoConfigInit(pAd);
#endif // VIDEO_TURBINE_SUPPORT //
#endif // RMTP_RBUS_SUPPORT //
// Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default
//
UserCfgInit(pAd);
Status = RtmpNetTaskInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
goto err5;
// COPY_MAC_ADDR(pAd->ApCfg.MBSSID[apidx].Bssid, netif->hwaddr);
// pAd->bForcePrintTX = TRUE;
CfgInitHook(pAd);
#ifdef BLOCK_NET_IF
initblockQueueTab(pAd);
#endif // BLOCK_NET_IF //
Status = MeasureReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("MeasureReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
Status = TpcReqTabInit(pAd);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("TpcReqTabInit failed, Status[=0x%08x]\n",Status));
goto err6;
}
//
// Init the hardware, we need to init asic before read registry, otherwise mac register will be reset
//
Status = NICInitializeAdapter(pAd, TRUE);
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
if (Status != NDIS_STATUS_SUCCESS)
goto err6;
}
// Read parameters from Config File
/* unknown, it will be updated in NICReadEEPROMParameters */
pAd->RfIcType = RFIC_UNKNOWN;
Status = RTMPReadParametersHook(pAd);
#ifdef CREDENTIAL_STORE
RecoverConnectInfo(pAd);
#endif /* CREDENTIAL_STORE */
DBGPRINT(RT_DEBUG_OFF, ("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
if (Status != NDIS_STATUS_SUCCESS)
{
DBGPRINT_ERR(("RTMPReadParametersHook failed, Status[=0x%08x]\n",Status));
goto err6;
}
#ifdef DOT11_N_SUPPORT
//Init Ba Capability parameters.
// RT28XX_BA_INIT(pAd);
pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
// UPdata to HT IE
pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
#endif // DOT11_N_SUPPORT //
// after reading Registry, we now know if in AP mode or STA mode
// Load 8051 firmware; crash when FW image not existent
// Status = NICLoadFirmware(pAd);
// if (Status != NDIS_STATUS_SUCCESS)
// break;
DBGPRINT(RT_DEBUG_OFF, ("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
// We should read EEPROM for all cases. rt2860b
NICReadEEPROMParameters(pAd, (PUCHAR)pDefaultMac);
#ifdef CONFIG_STA_SUPPORT
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_OFF, ("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode));
NICInitAsicFromEEPROM(pAd); //rt2860b
#ifdef RTMP_INTERNAL_TX_ALC
//
// Initialize the desired TSSI table
//
InitDesiredTSSITable(pAd);
#endif // RTMP_INTERNAL_TX_ALC //
// Set PHY to appropriate mode
TmpPhy = pAd->CommonCfg.PhyMode;
pAd->CommonCfg.PhyMode = 0xff;
RTMPSetPhyMode(pAd, TmpPhy);
#ifdef DOT11_N_SUPPORT
SetCommonHT(pAd);
#endif // DOT11_N_SUPPORT //
// No valid channels.
if (pAd->ChannelListNum == 0)
{
DBGPRINT(RT_DEBUG_ERROR, ("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n"));
goto err6;
}
#ifdef DOT11_N_SUPPORT
DBGPRINT(RT_DEBUG_OFF, ("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]));
#endif // DOT11_N_SUPPORT //
// APInitialize(pAd);
#ifdef IKANOS_VX_1X0
VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif // IKANOS_VX_1X0 //
/*
Some modules init must be called before APStartUp().
Or APStartUp() will make up beacon content and call
other modules API to get some information to fill.
*/
if (pAd && (Status != NDIS_STATUS_SUCCESS))
{
//
// Undo everything if it failed
//
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
// NdisMDeregisterInterrupt(&pAd->Interrupt);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
// RTMPFreeAdapter(pAd); // we will free it in disconnect()
}
else if (pAd)
{
// Microsoft HCT require driver send a disconnect event after driver initialization.
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
}// end of else
// Set up the Mac address
RtmpOSNetDevAddrSet(pAd->net_dev, &pAd->CurrentAddress[0]);
// Various AP function init
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface up.
RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_UP, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
#ifdef RT33xx
if (IS_RT3390(pAd))
{
RTMP_TxEvmCalibration(pAd);
}
#endif // RT33xx //
DBGPRINT_S(Status, ("<==== rt28xx_init, Status=%x\n", Status));
return TRUE;
err6:
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
err5:
RtmpNetTaskExit(pAd);
UserCfgExit(pAd);
err4:
MlmeHalt(pAd);
err3:
RtmpMgmtTaskExit(pAd);
err2:
#ifdef RESOURCE_PRE_ALLOC
RTMPResetTxRxRingMemory(pAd);
#else
RTMPFreeTxRxRingMemory(pAd);
#endif // RESOURCE_PRE_ALLOC //
err1:
#ifdef DOT11_N_SUPPORT
if(pAd->mpdu_blk_pool.mem)
os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
#endif // DOT11_N_SUPPORT //
// shall not set priv to NULL here because the priv didn't been free yet.
//net_dev->priv = 0;
#ifdef INF_AMAZON_SE
err0:
#endif // INF_AMAZON_SE //
#ifdef ST
err0:
#endif // ST //
DBGPRINT(RT_DEBUG_ERROR, ("!!! rt28xx Initialized fail !!!\n"));
return FALSE;
}
/*
==========================================================================
Description:
IRQL = DISPATCH_LEVEL
==========================================================================
*/
VOID PeerDeauthAction(
IN PRTMP_ADAPTER pAd,
IN PMLME_QUEUE_ELEM Elem)
{
UCHAR Addr1[MAC_ADDR_LEN];
UCHAR Addr2[MAC_ADDR_LEN];
UCHAR Addr3[MAC_ADDR_LEN];
USHORT Reason;
BOOLEAN bDoIterate = FALSE;
if (PeerDeauthSanity(pAd, Elem->Msg, Elem->MsgLen, Addr1, Addr2, Addr3, &Reason)) {
if (INFRA_ON(pAd)
&& (MAC_ADDR_EQUAL(Addr1, pAd->CurrentAddress)
|| MAC_ADDR_EQUAL(Addr1, BROADCAST_ADDR))
&& MAC_ADDR_EQUAL(Addr2, pAd->CommonCfg.Bssid)
&& MAC_ADDR_EQUAL(Addr3, pAd->CommonCfg.Bssid)
#ifdef DOT11R_FT_SUPPORT
&& ((pAd->StaCfg.Dot11RCommInfo.bInMobilityDomain == FALSE)
|| (pAd->StaCfg.Dot11RCommInfo.FtRspSuccess == 0))
#endif /* DOT11R_FT_SUPPORT */
) {
struct wifi_dev *wdev = &pAd->StaCfg.wdev;
DBGPRINT(RT_DEBUG_TRACE,
("AUTH_RSP - receive DE-AUTH from our AP (Reason=%d)\n",
Reason));
if (Reason == REASON_4_WAY_TIMEOUT)
RTMPSendWirelessEvent(pAd,
IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG,
NULL, 0, 0);
if (Reason == REASON_GROUP_KEY_HS_TIMEOUT)
RTMPSendWirelessEvent(pAd,
IW_GROUP_HS_TIMEOUT_EVENT_FLAG,
NULL, 0, 0);
#ifdef WAPI_SUPPORT
WAPI_InternalCmdAction(pAd,
wdev->AuthMode,
BSS0,
Addr2, WAI_MLME_DISCONNECT);
#endif /* WAPI_SUPPORT */
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
RtmpOSWrielessEventSend(pAd->net_dev,
RT_WLAN_EVENT_CGIWAP, -1, NULL,
NULL, 0);
#endif /* NATIVE_WPA_SUPPLICANT_SUPPORT */
/* send wireless event - for deauthentication */
RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, NULL,
BSS0, 0);
#ifdef WPA_SUPPLICANT_SUPPORT
if ((pAd->StaCfg.wpa_supplicant_info.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
&& (wdev->AuthMode == Ndis802_11AuthModeWPA2)
&& (wdev->PortSecured == WPA_802_1X_PORT_SECURED))
pAd->StaCfg.wpa_supplicant_info.bLostAp = TRUE;
#endif /* WPA_SUPPLICANT_SUPPORT */
/*
Some customer would set AP1 & AP2 same SSID, AuthMode & EncrypType but different WPAPSK,
therefore we need to do iterate here.
*/
if ((wdev->PortSecured == WPA_802_1X_PORT_NOT_SECURED)
&&
((wdev->AuthMode == Ndis802_11AuthModeWPAPSK)
|| (wdev->AuthMode == Ndis802_11AuthModeWPA2PSK))
#ifdef WSC_STA_SUPPORT
&& (pAd->StaCfg.WscControl.WscState < WSC_STATE_LINK_UP)
#endif /* WSC_STA_SUPPORT */
)
bDoIterate = TRUE;
LinkDown(pAd, TRUE);
if (bDoIterate) {
pAd->MlmeAux.BssIdx++;
IterateOnBssTab(pAd);
}
}
#ifdef ADHOC_WPA2PSK_SUPPORT
else if (ADHOC_ON(pAd)
&& (MAC_ADDR_EQUAL(Addr1, pAd->CurrentAddress)
|| MAC_ADDR_EQUAL(Addr1, BROADCAST_ADDR))) {
MAC_TABLE_ENTRY *pEntry;
pEntry = MacTableLookup(pAd, Addr2);
if (pEntry && IS_ENTRY_CLIENT(pEntry))
MacTableDeleteEntry(pAd, pEntry->wcid, pEntry->Addr);
DBGPRINT(RT_DEBUG_ERROR,
("AUTH_RSP - receive DE-AUTH from %02x:%02x:%02x:%02x:%02x:%02x \n",
PRINT_MAC(Addr2)));
}
#endif /* ADHOC_WPA2PSK_SUPPORT */
} else {
DBGPRINT(RT_DEBUG_TRACE,
("AUTH_RSP - PeerDeauthAction() sanity check fail\n"));
}
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int rt28xx_close(IN PNET_DEV dev)
{
struct net_device * net_dev = (struct net_device *)dev;
RTMP_ADAPTER *pAd = NULL;
BOOLEAN Cancelled;
UINT32 i = 0;
#ifdef RTMP_MAC_USB
DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
DECLARE_WAITQUEUE(wait, current);
//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
#endif // RTMP_MAC_USB //
GET_PAD_FROM_NET_DEV(pAd, net_dev);
DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
Cancelled = FALSE;
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
#ifdef WDS_SUPPORT
WdsDown(pAd);
#endif // WDS_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// If dirver doesn't wake up firmware here,
// NICLoadFirmware will hang forever when interface is up again.
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
{
AsicForceWakeup(pAd, TRUE);
}
#ifdef QOS_DLS_SUPPORT
// send DLS-TEAR_DOWN message,
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
// tear down local dls table entry
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
// tear down peer dls table entry
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif // QOS_DLS_SUPPORT //
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
// Prevent to connect AP again in STAMlmePeriodicExec
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef RTMP_MAC_USB
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
#endif // RTMP_MAC_USB //
RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface down.
RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //
MlmeRadioOff(pAd);
}
#endif // CONFIG_STA_SUPPORT //
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
for (i = 0 ; i < NUM_OF_TX_RING; i++)
{
while (pAd->DeQueueRunning[i] == TRUE)
{
DBGPRINT(RT_DEBUG_TRACE, ("Waiting for TxQueue[%d] done..........\n", i));
RTMPusecDelay(1000);
}
}
#ifdef RTMP_MAC_USB
// ensure there are no more active urbs.
add_wait_queue (&unlink_wakeup, &wait);
pAd->wait = &unlink_wakeup;
// maybe wait for deletions to finish.
i = 0;
//while((i < 25) && atomic_read(&pAd->PendingRx) > 0)
while(i < 25)
{
unsigned long IrqFlags;
RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
if (pAd->PendingRx == 0)
{
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
break;
}
RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,9)
msleep(UNLINK_TIMEOUT_MS); //Time in millisecond
#else
RTMPusecDelay(UNLINK_TIMEOUT_MS*1000); //Time in microsecond
#endif
i++;
}
pAd->wait = NULL;
remove_wait_queue (&unlink_wakeup, &wait);
#endif // RTMP_MAC_USB //
// Stop Mlme state machine
MlmeHalt(pAd);
// Close net tasklets
RtmpNetTaskExit(pAd);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
MacTableReset(pAd);
}
#endif // CONFIG_STA_SUPPORT //
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
#ifdef WSC_INCLUDED
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
WscStop(pAd,
&pAd->StaCfg.WscControl);
#endif // CONFIG_STA_SUPPORT //
#ifdef OLD_DH_KEY
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
WSC_VFREE_KEY_MEM(pAd->StaCfg.WscControl.pPubKeyMem, pAd->StaCfg.WscControl.pSecKeyMem);
#endif // CONFIG_STA_SUPPORT //
#endif // OLD_DH_KEY //
#ifndef OLD_DH_KEY
DH_freeall();
#endif // OLD_DH_KEY //
/* WSC hardware push button function 0811 */
WSC_HDR_BTN_Stop(pAd);
#endif // WSC_INCLUDED //
// Close kernel threads
RtmpMgmtTaskExit(pAd);
// Free IRQ
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
// Free Ring or USB buffers
RTMPFreeTxRxRingMemory(pAd);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
#ifdef DOT11_N_SUPPORT
// Free BA reorder resource
ba_reordering_resource_release(pAd);
#endif // DOT11_N_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
#endif // CONFIG_STA_SUPPORT //
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
/*+++Modify by woody to solve the bulk fail+++*/
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef RT35xx
if (IS_RT3572(pAd))
{
RT30xxWriteRFRegister(pAd, RF_R08, 0x00);
AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
}
#endif // RT35xx //
}
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt28xx_close\n"));
return 0; // close ok
} /* End of rt28xx_close */
