/***********************************************************
* Function:
* Description:
* Input:
* Input:
* Output:
* Return:
* Others:
***********************************************************/
static void rt_thread_entry_sd_test( void* parameter )
{
FRESULT res;
char tempbuf[64];
rt_sem_take( &sem_dataflash, RT_TICK_PER_SECOND * FLASH_SEM_DELAY );
SPI_Configuration();
res = SD_Init();
if(0 == res)
{
rt_kprintf("\r\n SD CARD INIT OK!");
memset(tempbuf,0,sizeof(tempbuf));
SD_GetCID(tempbuf);
rt_kprintf("\r\n CID=");
printf_hex_data(tempbuf, 16);
SD_GetCSD(tempbuf);
rt_kprintf("\r\n SID=");
printf_hex_data(tempbuf, 16);
rt_kprintf("\r\n SD 容量=%d",SD_GetCapacity());
}
else
{
rt_kprintf("\r\n SD CARD INIT ERR = %d",res);
}
if(0 == f_mount(MMC, &fs))
{
rt_kprintf("\r\n f_mount SD OK!");
}
rt_sem_release(&sem_dataflash);
while( 1 )
{
rt_thread_delay( RT_TICK_PER_SECOND / 20 );
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main()
{
//uint8_t tx_size[8] = { 2, 2, 2, 2, 2, 2, 2, 2 };
//uint8_t rx_size[8] = { 2, 2, 2, 2, 2, 2, 2, 2 };
uint8_t mac_addr[6] = {0x00, 0x08, 0xDC, 0x01, 0x02, 0x03};
uint8_t src_addr[4] = {192, 168, 77, 9};
uint8_t gw_addr[4] = {192, 168, 77, 1};
uint8_t sub_addr[4] = {255, 255, 255, 0};
//uint8_t dns_server[4] = {8, 8, 8, 8}; // for Example domain name server
uint8_t tmp[8], ret, cid[16];
int i;
GPIO_InitTypeDef GPIO_InitDef;
/* External Clock */
CRG_PLL_InputFrequencySelect(CRG_OCLK);
/* Clock */
*(volatile uint32_t *)(0x41001014) = 0x000C0200; // 48MHz
//*(volatile uint32_t *)(0x41001014) = 0x00050200; // 20MHz, Default
//*(volatile uint32_t *)(0x41001014) = 0x00040200; // 16MHz
/* Set Systme init */
SystemInit();
/* UART2 Init */
S_UART_Init(115200);
/* SysTick_Config */
SysTick_Config((GetSystemClock()/1000));
/* Set WZ_100US Register */
printf(" GetSystemClock : %d (Hz) \r\n", GetSystemClock());
setTIC100US((GetSystemClock()/10000));
printf(" val: %X, getTIC100US: %X, (%X) \r\n", GetSystemClock(), getTIC100US(), *(uint32_t *)WZTOE_TIC100US);
#ifdef __DEF_USED_IC101AG__ //For using IC+101AG
*(volatile uint32_t *)(0x41003068) = 0x64; //TXD0 - set PAD strengh and pull-up
*(volatile uint32_t *)(0x4100306C) = 0x64; //TXD1 - set PAD strengh and pull-up
*(volatile uint32_t *)(0x41003070) = 0x64; //TXD2 - set PAD strengh and pull-up
*(volatile uint32_t *)(0x41003074) = 0x64; //TXD3 - set PAD strengh and pull-up
*(volatile uint32_t *)(0x41003050) = 0x64; //TXE - set PAD strengh and pull-up
#endif
printf("PHY is linked. \r\n");
#ifdef __DEF_USED_MDIO__
/* mdio Init */
mdio_init(GPIOB, MDC, MDIO );
/* PHY Link Check via gpio mdio */
while( link() == 0x0 )
{
printf(".");
delay(500);
}
printf("PHY is linked. \r\n");
#else
delay(1000);
delay(1000);
#endif
GPIO_InitDef.GPIO_Pin = (GPIO_Pin_1 | GPIO_Pin_2);
GPIO_InitDef.GPIO_Mode = GPIO_Mode_OUT;
GPIO_Init(GPIOA, &GPIO_InitDef);
PAD_AFConfig(PAD_PA, (GPIO_Pin_1 | GPIO_Pin_2), PAD_AF1);
for(i=0; i<4; i++)
{
// LED ON
GPIO_ResetBits(GPIOA, (GPIO_Pin_1 | GPIO_Pin_2)) ;
delay(200);
// LED OFF
GPIO_SetBits(GPIOA, (GPIO_Pin_1 | GPIO_Pin_2)) ;
delay(200);
}
printf("[DEBUG] SD Card Test\r\n");
bsp_sd_gpio_init();
ret = SD_Init();
switch(SD_Type)
{
case SD_TYPE_MMC: printf("[DEBUG] init ret : %d , SD Card Type : MMC\r\n", ret); break;
case SD_TYPE_V1: printf("[DEBUG] init ret : %d , SD Card Type : SD\r\n", ret); break;
case SD_TYPE_V2: printf("[DEBUG] init ret : %d , SD Card Type : SD2\r\n", ret); break;
case SD_TYPE_V2HC: printf("[DEBUG] init ret : %d , SD Card Type : SDHC\r\n", ret); break;
default: printf("[DEBUG] init ret : %d , SD Card Type : %d\r\n", ret, SD_Type); break;
}
memset(&cid[0], 0x00, 16);
ret = SD_GetCID(cid);
if( (cid[0]==0x00) && (cid[1]==0x00) && (cid[2]==0x00) && (cid[3]==0x00) &&
(cid[4]==0x00) && (cid[5]==0x00) && (cid[6]==0x00) && (cid[7]==0x00) &&
(cid[8]==0x00) && (cid[9]==0x00) && (cid[10]==0x00) && (cid[11]==0x00) &&
(cid[12]==0x00) && (cid[13]==0x00) && (cid[14]==0x00) && (cid[15]==0x00)
)
{
// Turn on LED 1
printf("SD Test Fail!!\r\n");
GPIO_ResetBits(GPIOA, GPIO_Pin_1);
}
else
{
// Turn on LED 1 & LED 2
printf("SD Test O.K!!!r\n");
GPIO_ResetBits(GPIOA, (GPIO_Pin_1|GPIO_Pin_2) );
}
//printf("[DEBUG] state : %d\r\n", state);
printf("[DEBUG] CID / MID : 0x%.2X\r\n", cid[0]);
printf("[DEBUG] CID / OID : %c%c\r\n", cid[1], cid[2]);
printf("[DEBUG] CID / PNM : %c%c%c%c%c\r\n", cid[3], cid[4], cid[5], cid[6], cid[7]);
/* Network Configuration */
setSHAR(mac_addr);
getSHAR(tmp);
printf(" MAC ADDRESS : %.2X:%.2X:%.2X:%.2X:%.2X:%.2X\r\n",tmp[0],tmp[1],tmp[2],tmp[3],tmp[4],tmp[5]);
setSIPR(src_addr);
getSIPR(tmp);
printf("IP ADDRESS : %d.%d.%d.%d\r\n",tmp[0],tmp[1],tmp[2],tmp[3]);
setGAR(gw_addr);
getGAR(tmp);
printf("GW ADDRESS : %d.%d.%d.%d\r\n",tmp[0],tmp[1],tmp[2],tmp[3]);
setSUBR(sub_addr);
getSUBR(tmp);
printf("SN MASK: %d.%d.%d.%d\r\n",tmp[0],tmp[1],tmp[2],tmp[3]);
while(1)
{
loopback_tcps(0, test_buf, 5000);
}
}