/*
* This function handles Mediatek defined SiP Calls */
uint64_t mediatek_sip_handler(uint32_t smc_fid,
uint64_t x1,
uint64_t x2,
uint64_t x3,
uint64_t x4,
void *cookie,
void *handle,
uint64_t flags)
{
uint32_t ns;
/* if parameter is sent from SMC32. Clean top 32 bits */
clean_top_32b_of_param(smc_fid, &x1, &x2, &x3, &x4);
/* Determine which security state this SMC originated from */
ns = is_caller_non_secure(flags);
if (!ns) {
/* SiP SMC service secure world's call */
;
} else {
/* SiP SMC service normal world's call */
switch (smc_fid) {
#if MTK_SIP_SET_AUTHORIZED_SECURE_REG_ENABLE
case MTK_SIP_SET_AUTHORIZED_SECURE_REG: {
/* only use ret here */
uint64_t ret;
ret = mt_sip_set_authorized_sreg((uint32_t)x1,
(uint32_t)x2);
SMC_RET1(handle, ret);
}
#endif
#if MTK_SIP_KERNEL_BOOT_ENABLE
case MTK_SIP_KERNEL_BOOT_AARCH32:
boot_to_kernel(x1, x2, x3, x4);
SMC_RET0(handle);
#endif
}
}
return mediatek_plat_sip_handler(smc_fid, x1, x2, x3, x4,
cookie, handle, flags);
}
/*******************************************************************************
* This function is responsible for handling all SMCs in the Trusted OS/App
* range from the non-secure state as defined in the SMC Calling Convention
* Document. It is also responsible for communicating with the Secure payload
* to delegate work and return results back to the non-secure state. Lastly it
* will also return any information that the secure payload needs to do the
* work assigned to it.
******************************************************************************/
uint64_t tlkd_smc_handler(uint32_t smc_fid,
uint64_t x1,
uint64_t x2,
uint64_t x3,
uint64_t x4,
void *cookie,
void *handle,
uint64_t flags)
{
cpu_context_t *ns_cpu_context;
gp_regs_t *gp_regs;
uint32_t ns;
uint64_t par;
/* Passing a NULL context is a critical programming error */
assert(handle);
/* These SMCs are only supported by CPU0 */
if ((read_mpidr() & MPIDR_CPU_MASK) != 0)
SMC_RET1(handle, SMC_UNK);
/* Determine which security state this SMC originated from */
ns = is_caller_non_secure(flags);
switch (smc_fid) {
/*
* This function ID is used by SP to indicate that it was
* preempted by a non-secure world IRQ.
*/
case TLK_PREEMPTED:
if (ns)
SMC_RET1(handle, SMC_UNK);
assert(handle == cm_get_context(SECURE));
cm_el1_sysregs_context_save(SECURE);
/* Get a reference to the non-secure context */
ns_cpu_context = cm_get_context(NON_SECURE);
assert(ns_cpu_context);
/*
* Restore non-secure state. There is no need to save the
* secure system register context since the SP was supposed
* to preserve it during S-EL1 interrupt handling.
*/
cm_el1_sysregs_context_restore(NON_SECURE);
cm_set_next_eret_context(NON_SECURE);
SMC_RET1(ns_cpu_context, x1);
/*
* Request from non secure world to resume the preempted
* Standard SMC call.
*/
case TLK_RESUME_FID:
/* RESUME should be invoked only by normal world */
if (!ns)
SMC_RET1(handle, SMC_UNK);
/*
* This is a resume request from the non-secure client.
* save the non-secure state and send the request to
* the secure payload.
*/
assert(handle == cm_get_context(NON_SECURE));
/* Check if we are already preempted before resume */
if (!get_std_smc_active_flag(tlk_ctx.state))
SMC_RET1(handle, SMC_UNK);
cm_el1_sysregs_context_save(NON_SECURE);
/*
* We are done stashing the non-secure context. Ask the
* secure payload to do the work now.
*/
/* We just need to return to the preempted point in
* SP and the execution will resume as normal.
*/
cm_el1_sysregs_context_restore(SECURE);
cm_set_next_eret_context(SECURE);
SMC_RET0(handle);
/*
* This is a request from the non-secure context to:
*
* a. register shared memory with the SP for storing it's
* activity logs.
* b. register shared memory with the SP for passing args
* required for maintaining sessions with the Trusted
* Applications.
* c. open/close sessions
* d. issue commands to the Trusted Apps
*/
case TLK_REGISTER_LOGBUF:
case TLK_REGISTER_REQBUF:
case TLK_OPEN_TA_SESSION:
case TLK_CLOSE_TA_SESSION:
case TLK_TA_LAUNCH_OP:
case TLK_TA_SEND_EVENT:
if (!ns)
SMC_RET1(handle, SMC_UNK);
/*
* This is a fresh request from the non-secure client.
* The parameters are in x1 and x2. Figure out which
* registers need to be preserved, save the non-secure
* state and send the request to the secure payload.
*/
assert(handle == cm_get_context(NON_SECURE));
/* Check if we are already preempted */
if (get_std_smc_active_flag(tlk_ctx.state))
SMC_RET1(handle, SMC_UNK);
cm_el1_sysregs_context_save(NON_SECURE);
/*
* Verify if there is a valid context to use.
*/
assert(&tlk_ctx.cpu_ctx == cm_get_context(SECURE));
/*
* Mark the SP state as active.
*/
set_std_smc_active_flag(tlk_ctx.state);
/*
* We are done stashing the non-secure context. Ask the
* secure payload to do the work now.
*/
cm_el1_sysregs_context_restore(SECURE);
cm_set_next_eret_context(SECURE);
/*
* TLK is a 32-bit Trusted OS and so expects the SMC
* arguments via r0-r7. TLK expects the monitor frame
* registers to be 64-bits long. Hence, we pass x0 in
* r0-r1, x1 in r2-r3, x3 in r4-r5 and x4 in r6-r7.
*
* As smc_fid is a uint32 value, r1 contains 0.
*/
gp_regs = get_gpregs_ctx(&tlk_ctx.cpu_ctx);
write_ctx_reg(gp_regs, CTX_GPREG_X4, (uint32_t)x2);
write_ctx_reg(gp_regs, CTX_GPREG_X5, (uint32_t)(x2 >> 32));
write_ctx_reg(gp_regs, CTX_GPREG_X6, (uint32_t)x3);
write_ctx_reg(gp_regs, CTX_GPREG_X7, (uint32_t)(x3 >> 32));
SMC_RET4(&tlk_ctx.cpu_ctx, smc_fid, 0, (uint32_t)x1,
(uint32_t)(x1 >> 32));
/*
* Translate NS/EL1-S virtual addresses.
*
* x1 = virtual address
* x3 = type (NS/S)
*
* Returns PA:lo in r0, PA:hi in r1.
*/
case TLK_VA_TRANSLATE:
/* Should be invoked only by secure world */
if (ns)
SMC_RET1(handle, SMC_UNK);
/* NS virtual addresses are 64-bit long */
if (x3 & TLK_TRANSLATE_NS_VADDR)
x1 = (uint32_t)x1 | (x2 << 32);
if (!x1)
SMC_RET1(handle, SMC_UNK);
/*
* TODO: Sanity check x1. This would require platform
* support.
*/
/* virtual address and type: ns/s */
par = tlkd_va_translate(x1, x3);
/* return physical address in r0-r1 */
SMC_RET4(handle, (uint32_t)par, (uint32_t)(par >> 32), 0, 0);
/*
* This is a request from the SP to mark completion of
* a standard function ID.
*/
case TLK_REQUEST_DONE:
if (ns)
SMC_RET1(handle, SMC_UNK);
/*
* Mark the SP state as inactive.
*/
clr_std_smc_active_flag(tlk_ctx.state);
/* Get a reference to the non-secure context */
ns_cpu_context = cm_get_context(NON_SECURE);
assert(ns_cpu_context);
/*
* This is a request completion SMC and we must switch to
* the non-secure world to pass the result.
*/
cm_el1_sysregs_context_save(SECURE);
/*
* We are done stashing the secure context. Switch to the
* non-secure context and return the result.
*/
cm_el1_sysregs_context_restore(NON_SECURE);
cm_set_next_eret_context(NON_SECURE);
SMC_RET1(ns_cpu_context, x1);
/*
* This function ID is used only by the SP to indicate it has
* finished initialising itself after a cold boot
*/
case TLK_ENTRY_DONE:
if (ns)
SMC_RET1(handle, SMC_UNK);
/*
* SP has been successfully initialized. Register power
* managemnt hooks with PSCI
*/
psci_register_spd_pm_hook(&tlkd_pm_ops);
/*
* TLK reports completion. The SPD must have initiated
* the original request through a synchronous entry
* into the SP. Jump back to the original C runtime
* context.
*/
tlkd_synchronous_sp_exit(&tlk_ctx, x1);
/*
* Return the number of service function IDs implemented to
* provide service to non-secure
*/
case TOS_CALL_COUNT:
SMC_RET1(handle, TLK_NUM_FID);
/*
* Return TLK's UID to the caller
*/
case TOS_UID:
SMC_UUID_RET(handle, tlk_uuid);
/*
* Return the version of current implementation
*/
case TOS_CALL_VERSION:
SMC_RET2(handle, TLK_VERSION_MAJOR, TLK_VERSION_MINOR);
default:
break;
}
SMC_RET1(handle, SMC_UNK);
}
/*******************************************************************************
* This function is responsible for handling all SMCs in the Trusted OS/App
* range from the non-secure state as defined in the SMC Calling Convention
* Document. It is also responsible for communicating with the Secure payload
* to delegate work and return results back to the non-secure state. Lastly it
* will also return any information that the secure payload needs to do the
* work assigned to it.
******************************************************************************/
uint64_t tspd_smc_handler(uint32_t smc_fid,
uint64_t x1,
uint64_t x2,
uint64_t x3,
uint64_t x4,
void *cookie,
void *handle,
uint64_t flags)
{
cpu_context_t *ns_cpu_context;
uint32_t linear_id = plat_my_core_pos(), ns;
tsp_context_t *tsp_ctx = &tspd_sp_context[linear_id];
uint64_t rc;
#if TSP_INIT_ASYNC
entry_point_info_t *next_image_info;
#endif
/* Determine which security state this SMC originated from */
ns = is_caller_non_secure(flags);
switch (smc_fid) {
/*
* This function ID is used by TSP to indicate that it was
* preempted by a normal world IRQ.
*
*/
case TSP_PREEMPTED:
if (ns)
SMC_RET1(handle, SMC_UNK);
return tspd_handle_sp_preemption(handle);
/*
* This function ID is used only by the TSP to indicate that it has
* finished handling a S-EL1 FIQ interrupt. Execution should resume
* in the normal world.
*/
case TSP_HANDLED_S_EL1_FIQ:
if (ns)
SMC_RET1(handle, SMC_UNK);
assert(handle == cm_get_context(SECURE));
/*
* Restore the relevant EL3 state which saved to service
* this SMC.
*/
if (get_std_smc_active_flag(tsp_ctx->state)) {
SMC_SET_EL3(&tsp_ctx->cpu_ctx,
CTX_SPSR_EL3,
tsp_ctx->saved_spsr_el3);
SMC_SET_EL3(&tsp_ctx->cpu_ctx,
CTX_ELR_EL3,
tsp_ctx->saved_elr_el3);
#if TSPD_ROUTE_IRQ_TO_EL3
/*
* Need to restore the previously interrupted
* secure context.
*/
memcpy(&tsp_ctx->cpu_ctx, &tsp_ctx->sp_ctx,
TSPD_SP_CTX_SIZE);
#endif
}
/* Get a reference to the non-secure context */
ns_cpu_context = cm_get_context(NON_SECURE);
assert(ns_cpu_context);
/*
* Restore non-secure state. There is no need to save the
* secure system register context since the TSP was supposed
* to preserve it during S-EL1 interrupt handling.
*/
cm_el1_sysregs_context_restore(NON_SECURE);
cm_set_next_eret_context(NON_SECURE);
SMC_RET0((uint64_t) ns_cpu_context);
/*
* This function ID is used only by the TSP to indicate that it was
* interrupted due to a EL3 FIQ interrupt. Execution should resume
* in the normal world.
*/
case TSP_EL3_FIQ:
if (ns)
SMC_RET1(handle, SMC_UNK);
assert(handle == cm_get_context(SECURE));
/* Assert that standard SMC execution has been preempted */
assert(get_std_smc_active_flag(tsp_ctx->state));
/* Save the secure system register state */
cm_el1_sysregs_context_save(SECURE);
/* Get a reference to the non-secure context */
ns_cpu_context = cm_get_context(NON_SECURE);
assert(ns_cpu_context);
/* Restore non-secure state */
cm_el1_sysregs_context_restore(NON_SECURE);
cm_set_next_eret_context(NON_SECURE);
SMC_RET1(ns_cpu_context, TSP_EL3_FIQ);
/*
* This function ID is used only by the SP to indicate it has
* finished initialising itself after a cold boot
*/
case TSP_ENTRY_DONE:
if (ns)
SMC_RET1(handle, SMC_UNK);
/*
* Stash the SP entry points information. This is done
* only once on the primary cpu
*/
assert(tsp_vectors == NULL);
tsp_vectors = (tsp_vectors_t *) x1;
if (tsp_vectors) {
set_tsp_pstate(tsp_ctx->state, TSP_PSTATE_ON);
/*
* TSP has been successfully initialized. Register power
* managemnt hooks with PSCI
*/
psci_register_spd_pm_hook(&tspd_pm);
/*
* Register an interrupt handler for S-EL1 interrupts
* when generated during code executing in the
* non-secure state.
*/
flags = 0;
set_interrupt_rm_flag(flags, NON_SECURE);
rc = register_interrupt_type_handler(INTR_TYPE_S_EL1,
tspd_sel1_interrupt_handler,
flags);
if (rc)
panic();
#if TSPD_ROUTE_IRQ_TO_EL3
/*
* Register an interrupt handler for NS interrupts when
* generated during code executing in secure state are
* routed to EL3.
*/
flags = 0;
set_interrupt_rm_flag(flags, SECURE);
rc = register_interrupt_type_handler(INTR_TYPE_NS,
tspd_ns_interrupt_handler,
flags);
if (rc)
panic();
/*
* Disable the interrupt NS locally since it will be enabled globally
* within cm_init_my_context.
*/
disable_intr_rm_local(INTR_TYPE_NS, SECURE);
#endif
}
#if TSP_INIT_ASYNC
/* Save the Secure EL1 system register context */
assert(cm_get_context(SECURE) == &tsp_ctx->cpu_ctx);
cm_el1_sysregs_context_save(SECURE);
/* Program EL3 registers to enable entry into the next EL */
next_image_info = bl31_plat_get_next_image_ep_info(NON_SECURE);
assert(next_image_info);
assert(NON_SECURE ==
GET_SECURITY_STATE(next_image_info->h.attr));
cm_init_my_context(next_image_info);
cm_prepare_el3_exit(NON_SECURE);
SMC_RET0(cm_get_context(NON_SECURE));
#else
/*
* SP reports completion. The SPD must have initiated
* the original request through a synchronous entry
* into the SP. Jump back to the original C runtime
* context.
*/
tspd_synchronous_sp_exit(tsp_ctx, x1);
#endif
/*
* These function IDs is used only by the SP to indicate it has
* finished:
* 1. turning itself on in response to an earlier psci
* cpu_on request
* 2. resuming itself after an earlier psci cpu_suspend
* request.
*/
case TSP_ON_DONE:
case TSP_RESUME_DONE:
/*
* These function IDs is used only by the SP to indicate it has
* finished:
* 1. suspending itself after an earlier psci cpu_suspend
* request.
* 2. turning itself off in response to an earlier psci
* cpu_off request.
*/
case TSP_OFF_DONE:
case TSP_SUSPEND_DONE:
case TSP_SYSTEM_OFF_DONE:
case TSP_SYSTEM_RESET_DONE:
if (ns)
SMC_RET1(handle, SMC_UNK);
/*
* SP reports completion. The SPD must have initiated the
* original request through a synchronous entry into the SP.
* Jump back to the original C runtime context, and pass x1 as
* return value to the caller
*/
tspd_synchronous_sp_exit(tsp_ctx, x1);
/*
* Request from non-secure client to perform an
* arithmetic operation or response from secure
* payload to an earlier request.
*/
case TSP_FAST_FID(TSP_ADD):
case TSP_FAST_FID(TSP_SUB):
case TSP_FAST_FID(TSP_MUL):
case TSP_FAST_FID(TSP_DIV):
case TSP_STD_FID(TSP_ADD):
case TSP_STD_FID(TSP_SUB):
case TSP_STD_FID(TSP_MUL):
case TSP_STD_FID(TSP_DIV):
if (ns) {
/*
* This is a fresh request from the non-secure client.
* The parameters are in x1 and x2. Figure out which
* registers need to be preserved, save the non-secure
* state and send the request to the secure payload.
*/
assert(handle == cm_get_context(NON_SECURE));
/* Check if we are already preempted */
if (get_std_smc_active_flag(tsp_ctx->state))
SMC_RET1(handle, SMC_UNK);
cm_el1_sysregs_context_save(NON_SECURE);
/* Save x1 and x2 for use by TSP_GET_ARGS call below */
store_tsp_args(tsp_ctx, x1, x2);
/*
* We are done stashing the non-secure context. Ask the
* secure payload to do the work now.
*/
/*
* Verify if there is a valid context to use, copy the
* operation type and parameters to the secure context
* and jump to the fast smc entry point in the secure
* payload. Entry into S-EL1 will take place upon exit
* from this function.
*/
assert(&tsp_ctx->cpu_ctx == cm_get_context(SECURE));
/* Set appropriate entry for SMC.
* We expect the TSP to manage the PSTATE.I and PSTATE.F
* flags as appropriate.
*/
if (GET_SMC_TYPE(smc_fid) == SMC_TYPE_FAST) {
cm_set_elr_el3(SECURE, (uint64_t)
&tsp_vectors->fast_smc_entry);
} else {
set_std_smc_active_flag(tsp_ctx->state);
cm_set_elr_el3(SECURE, (uint64_t)
&tsp_vectors->std_smc_entry);
#if TSPD_ROUTE_IRQ_TO_EL3
/*
* Enable the routing of NS interrupts to EL3
* during STD SMC processing on this core.
*/
enable_intr_rm_local(INTR_TYPE_NS, SECURE);
#endif
}
cm_el1_sysregs_context_restore(SECURE);
cm_set_next_eret_context(SECURE);
SMC_RET3(&tsp_ctx->cpu_ctx, smc_fid, x1, x2);
} else {
/*
* This is the result from the secure client of an
* earlier request. The results are in x1-x3. Copy it
* into the non-secure context, save the secure state
* and return to the non-secure state.
*/
assert(handle == cm_get_context(SECURE));
cm_el1_sysregs_context_save(SECURE);
/* Get a reference to the non-secure context */
ns_cpu_context = cm_get_context(NON_SECURE);
assert(ns_cpu_context);
/* Restore non-secure state */
cm_el1_sysregs_context_restore(NON_SECURE);
cm_set_next_eret_context(NON_SECURE);
if (GET_SMC_TYPE(smc_fid) == SMC_TYPE_STD) {
clr_std_smc_active_flag(tsp_ctx->state);
#if TSPD_ROUTE_IRQ_TO_EL3
/*
* Disable the routing of NS interrupts to EL3
* after STD SMC processing is finished on this
* core.
*/
disable_intr_rm_local(INTR_TYPE_NS, SECURE);
#endif
}
SMC_RET3(ns_cpu_context, x1, x2, x3);
}
break;
/*
* Request from non secure world to resume the preempted
* Standard SMC call.
*/
case TSP_FID_RESUME:
/* RESUME should be invoked only by normal world */
if (!ns) {
assert(0);
break;
}
/*
* This is a resume request from the non-secure client.
* save the non-secure state and send the request to
* the secure payload.
*/
assert(handle == cm_get_context(NON_SECURE));
/* Check if we are already preempted before resume */
if (!get_std_smc_active_flag(tsp_ctx->state))
SMC_RET1(handle, SMC_UNK);
cm_el1_sysregs_context_save(NON_SECURE);
/*
* We are done stashing the non-secure context. Ask the
* secure payload to do the work now.
*/
#if TSPD_ROUTE_IRQ_TO_EL3
/*
* Enable the routing of NS interrupts to EL3 during resumption
* of STD SMC call on this core.
*/
enable_intr_rm_local(INTR_TYPE_NS, SECURE);
#endif
/* We just need to return to the preempted point in
* TSP and the execution will resume as normal.
*/
cm_el1_sysregs_context_restore(SECURE);
cm_set_next_eret_context(SECURE);
SMC_RET0(&tsp_ctx->cpu_ctx);
/*
* This is a request from the secure payload for more arguments
* for an ongoing arithmetic operation requested by the
* non-secure world. Simply return the arguments from the non-
* secure client in the original call.
*/
case TSP_GET_ARGS:
if (ns)
SMC_RET1(handle, SMC_UNK);
get_tsp_args(tsp_ctx, x1, x2);
SMC_RET2(handle, x1, x2);
case TOS_CALL_COUNT:
/*
* Return the number of service function IDs implemented to
* provide service to non-secure
*/
SMC_RET1(handle, TSP_NUM_FID);
case TOS_UID:
/* Return TSP UID to the caller */
SMC_UUID_RET(handle, tsp_uuid);
case TOS_CALL_VERSION:
/* Return the version of current implementation */
SMC_RET2(handle, TSP_VERSION_MAJOR, TSP_VERSION_MINOR);
default:
break;
}
SMC_RET1(handle, SMC_UNK);
}
/*******************************************************************************
* This function is responsible for handling all SMCs in the Trusted OS/App
* range from the non-secure state as defined in the SMC Calling Convention
* Document. It is also responsible for communicating with the Secure
* payload to delegate work and return results back to the non-secure
* state. Lastly it will also return any information that OPTEE needs to do
* the work assigned to it.
******************************************************************************/
uint64_t opteed_smc_handler(uint32_t smc_fid,
uint64_t x1,
uint64_t x2,
uint64_t x3,
uint64_t x4,
void *cookie,
void *handle,
uint64_t flags)
{
cpu_context_t *ns_cpu_context;
unsigned long mpidr = read_mpidr();
uint32_t linear_id = platform_get_core_pos(mpidr);
optee_context_t *optee_ctx = &opteed_sp_context[linear_id];
uint64_t rc;
/*
* Determine which security state this SMC originated from
*/
if (is_caller_non_secure(flags)) {
/*
* This is a fresh request from the non-secure client.
* The parameters are in x1 and x2. Figure out which
* registers need to be preserved, save the non-secure
* state and send the request to the secure payload.
*/
assert(handle == cm_get_context(NON_SECURE));
cm_el1_sysregs_context_save(NON_SECURE);
/*
* We are done stashing the non-secure context. Ask the
* OPTEE to do the work now.
*/
/*
* Verify if there is a valid context to use, copy the
* operation type and parameters to the secure context
* and jump to the fast smc entry point in the secure
* payload. Entry into S-EL1 will take place upon exit
* from this function.
*/
assert(&optee_ctx->cpu_ctx == cm_get_context(SECURE));
/* Set appropriate entry for SMC.
* We expect OPTEE to manage the PSTATE.I and PSTATE.F
* flags as appropriate.
*/
if (GET_SMC_TYPE(smc_fid) == SMC_TYPE_FAST) {
cm_set_elr_el3(SECURE, (uint64_t)
&optee_vectors->fast_smc_entry);
} else {
cm_set_elr_el3(SECURE, (uint64_t)
&optee_vectors->std_smc_entry);
}
cm_el1_sysregs_context_restore(SECURE);
cm_set_next_eret_context(SECURE);
/* Propagate hypervisor client ID */
write_ctx_reg(get_gpregs_ctx(&optee_ctx->cpu_ctx),
CTX_GPREG_X7,
read_ctx_reg(get_gpregs_ctx(handle),
CTX_GPREG_X7));
SMC_RET4(&optee_ctx->cpu_ctx, smc_fid, x1, x2, x3);
}
/*
* Returning from OPTEE
*/
switch (smc_fid) {
/*
* OPTEE has finished initialising itself after a cold boot
*/
case TEESMC_OPTEED_RETURN_ENTRY_DONE:
/*
* Stash the OPTEE entry points information. This is done
* only once on the primary cpu
*/
assert(optee_vectors == NULL);
optee_vectors = (optee_vectors_t *) x1;
if (optee_vectors) {
set_optee_pstate(optee_ctx->state, OPTEE_PSTATE_ON);
/*
* OPTEE has been successfully initialized.
* Register power management hooks with PSCI
*/
psci_register_spd_pm_hook(&opteed_pm);
/*
* Register an interrupt handler for S-EL1 interrupts
* when generated during code executing in the
* non-secure state.
*/
flags = 0;
set_interrupt_rm_flag(flags, NON_SECURE);
rc = register_interrupt_type_handler(INTR_TYPE_S_EL1,
opteed_sel1_interrupt_handler,
flags);
if (rc)
panic();
}
/*
* OPTEE reports completion. The OPTEED must have initiated
* the original request through a synchronous entry into
* OPTEE. Jump back to the original C runtime context.
*/
opteed_synchronous_sp_exit(optee_ctx, x1);
/*
* These function IDs is used only by OP-TEE to indicate it has
* finished:
* 1. turning itself on in response to an earlier psci
* cpu_on request
* 2. resuming itself after an earlier psci cpu_suspend
* request.
*/
case TEESMC_OPTEED_RETURN_ON_DONE:
case TEESMC_OPTEED_RETURN_RESUME_DONE:
/*
* These function IDs is used only by the SP to indicate it has
* finished:
* 1. suspending itself after an earlier psci cpu_suspend
* request.
* 2. turning itself off in response to an earlier psci
* cpu_off request.
*/
case TEESMC_OPTEED_RETURN_OFF_DONE:
case TEESMC_OPTEED_RETURN_SUSPEND_DONE:
case TEESMC_OPTEED_RETURN_SYSTEM_OFF_DONE:
case TEESMC_OPTEED_RETURN_SYSTEM_RESET_DONE:
/*
* OPTEE reports completion. The OPTEED must have initiated the
* original request through a synchronous entry into OPTEE.
* Jump back to the original C runtime context, and pass x1 as
* return value to the caller
*/
opteed_synchronous_sp_exit(optee_ctx, x1);
/*
* OPTEE is returning from a call or being preempted from a call, in
* either case execution should resume in the normal world.
*/
case TEESMC_OPTEED_RETURN_CALL_DONE:
/*
* This is the result from the secure client of an
* earlier request. The results are in x0-x3. Copy it
* into the non-secure context, save the secure state
* and return to the non-secure state.
*/
assert(handle == cm_get_context(SECURE));
cm_el1_sysregs_context_save(SECURE);
/* Get a reference to the non-secure context */
ns_cpu_context = cm_get_context(NON_SECURE);
assert(ns_cpu_context);
/* Restore non-secure state */
cm_el1_sysregs_context_restore(NON_SECURE);
cm_set_next_eret_context(NON_SECURE);
SMC_RET4(ns_cpu_context, x1, x2, x3, x4);
/*
* OPTEE has finished handling a S-EL1 FIQ interrupt. Execution
* should resume in the normal world.
*/
case TEESMC_OPTEED_RETURN_FIQ_DONE:
/* Get a reference to the non-secure context */
ns_cpu_context = cm_get_context(NON_SECURE);
assert(ns_cpu_context);
/*
* Restore non-secure state. There is no need to save the
* secure system register context since OPTEE was supposed
* to preserve it during S-EL1 interrupt handling.
*/
cm_el1_sysregs_context_restore(NON_SECURE);
cm_set_next_eret_context(NON_SECURE);
SMC_RET0((uint64_t) ns_cpu_context);
default:
panic();
}
}
/*******************************************************************************
* This function is responsible for handling all SiP calls
******************************************************************************/
uint64_t tegra_sip_handler(uint32_t smc_fid,
uint64_t x1,
uint64_t x2,
uint64_t x3,
uint64_t x4,
void *cookie,
void *handle,
uint64_t flags)
{
uint32_t regval;
int err;
/* Check if this is a SoC specific SiP */
err = plat_sip_handler(smc_fid, x1, x2, x3, x4, cookie, handle, flags);
if (err == 0)
SMC_RET1(handle, (uint64_t)err);
switch (smc_fid) {
case TEGRA_SIP_NEW_VIDEOMEM_REGION:
/* clean up the high bits */
x2 = (uint32_t)x2;
/*
* Check if Video Memory overlaps TZDRAM (contains bl31/bl32)
* or falls outside of the valid DRAM range
*/
err = bl31_check_ns_address(x1, x2);
if (err)
SMC_RET1(handle, err);
/*
* Check if Video Memory is aligned to 1MB.
*/
if ((x1 & 0xFFFFF) || (x2 & 0xFFFFF)) {
ERROR("Unaligned Video Memory base address!\n");
SMC_RET1(handle, -ENOTSUP);
}
/*
* The GPU is the user of the Video Memory region. In order to
* transition to the new memory region smoothly, we program the
* new base/size ONLY if the GPU is in reset mode.
*/
regval = mmio_read_32(TEGRA_CAR_RESET_BASE +
TEGRA_GPU_RESET_REG_OFFSET);
if ((regval & GPU_RESET_BIT) == 0U) {
ERROR("GPU not in reset! Video Memory setup failed\n");
SMC_RET1(handle, -ENOTSUP);
}
/* new video memory carveout settings */
tegra_memctrl_videomem_setup(x1, x2);
SMC_RET1(handle, 0);
break;
/*
* The NS world registers the address of its handler to be
* used for processing the FIQ. This is normally used by the
* NS FIQ debugger driver to detect system hangs by programming
* a watchdog timer to fire a FIQ interrupt.
*/
case TEGRA_SIP_FIQ_NS_ENTRYPOINT:
if (!x1)
SMC_RET1(handle, SMC_UNK);
/*
* TODO: Check if x1 contains a valid DRAM address
*/
/* store the NS world's entrypoint */
tegra_fiq_set_ns_entrypoint(x1);
SMC_RET1(handle, 0);
break;
/*
* The NS world's FIQ handler issues this SMC to get the NS EL1/EL0
* CPU context when the FIQ interrupt was triggered. This allows the
* NS world to understand the CPU state when the watchdog interrupt
* triggered.
*/
case TEGRA_SIP_FIQ_NS_GET_CONTEXT:
/* retrieve context registers when FIQ triggered */
tegra_fiq_get_intr_context();
SMC_RET0(handle);
break;
case TEGRA_SIP_ENABLE_FAKE_SYSTEM_SUSPEND:
/*
* System suspend fake mode is set if we are on VDK and we make
* a debug SIP call. This mode ensures that we excercise debug
* path instead of the regular code path to suit the pre-silicon
* platform needs. These include replacing the call to WFI by
* a warm reset request.
*/
if (tegra_platform_is_emulation() != 0U) {
tegra_fake_system_suspend = 1;
SMC_RET1(handle, 0);
}
/*
* We return to the external world as if this SIP is not
* implemented in case, we are not running on VDK.
*/
break;
default:
ERROR("%s: unhandled SMC (0x%x)\n", __func__, smc_fid);
break;
}
SMC_RET1(handle, SMC_UNK);
}
/*******************************************************************************
* This function is the handler registered for S-EL1 interrupts by the FIQD. It
* validates the interrupt and upon success arranges entry into the TSP at
* 'tsp_fiq_entry()' for handling the interrupt.
******************************************************************************/
static uint64_t fiqd_sel1_interrupt_handler(uint32_t id,
uint32_t flags,
void *handle,
void *cookie)
{
unsigned int iar;
/* Check the security state when the exception was generated */
assert(get_interrupt_src_ss(flags) == NON_SECURE);
#if IMF_READ_INTERRUPT_ID
/* Check the security status of the interrupt */
assert(plat_ic_get_interrupt_type(id) == INTR_TYPE_S_EL1);
#endif
/* Sanity check the pointer to this cpu's context */
assert(handle == cm_get_context(NON_SECURE));
/* Save the non-secure context before entering the TSP */
cm_el1_sysregs_context_save(NON_SECURE);
iar = get_ack_info();
ack_sgi(iar);
if(id == WDT_IRQ_BIT_ID)
{
/* FIX-ME : change 0xFE to the kernel online CPU mask */
fiq_smp_call_function(0xFE, aee_wdt_dump, 0, 0);
aee_wdt_dump();
}
if(id == FIQ_SMP_CALL_SGI)
{
fiq_icc_isr();
}
SMC_RET0(handle);
#if 0
/* Get a reference to this cpu's TSP context */
linear_id = platform_get_core_pos(mpidr);
tsp_ctx = &fiqd_sp_context[linear_id];
assert(&tsp_ctx->cpu_ctx == cm_get_context(SECURE));
/*
* Determine if the TSP was previously preempted. Its last known
* context has to be preserved in this case.
* The TSP should return control to the FIQD after handling this
* FIQ. Preserve essential EL3 context to allow entry into the
* TSP at the FIQ entry point using the 'cpu_context' structure.
* There is no need to save the secure system register context
* since the TSP is supposed to preserve it during S-EL1 interrupt
* handling.
*/
if (get_std_smc_active_flag(tsp_ctx->state)) {
tsp_ctx->saved_spsr_el3 = SMC_GET_EL3(&tsp_ctx->cpu_ctx,
CTX_SPSR_EL3);
tsp_ctx->saved_elr_el3 = SMC_GET_EL3(&tsp_ctx->cpu_ctx,
CTX_ELR_EL3);
}
cm_el1_sysregs_context_restore(SECURE);
cm_set_elr_spsr_el3(SECURE, (uint64_t) &tsp_vectors->fiq_entry,
SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS));
cm_set_next_eret_context(SECURE);
/*
* Tell the TSP that it has to handle an FIQ synchronously. Also the
* instruction in normal world where the interrupt was generated is
* passed for debugging purposes. It is safe to retrieve this address
* from ELR_EL3 as the secure context will not take effect until
* el3_exit().
*/
SMC_RET2(&tsp_ctx->cpu_ctx, TSP_HANDLE_FIQ_AND_RETURN, read_elr_el3());
#endif
}
