/**
* @brief Inititialize the target hardware.
* @param None
* @retval None
*/
uint32_t BSP_Init (void)
{
/* Initialize the LEDs */
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
STM_EVAL_LEDInit(LED3);
STM_EVAL_LEDInit(LED4);
CONSOLE_LOG((uint8_t *)"[SYSTEM] Data RAM Init : OK.");
/* Initialize the LCD */
GL_LCD_Init();
CONSOLE_LOG((uint8_t *)"[SYSTEM] LCD Init : OK.");
/* Initialize the TSC */
GL_TSC_Init();
CONSOLE_LOG((uint8_t *)"[SYSTEM] Touchscreen Init : OK.");
/* Initialize the Joystick */
GL_JOY_Init();
CONSOLE_LOG((uint8_t *)"[SYSTEM] Joystick Init : OK.");
/* Initialize the PSRAM */
SRAM_Init();
CONSOLE_LOG((uint8_t *)"[SYSTEM] SRAM Init: OK.");
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_BKPSRAM, ENABLE);
CONSOLE_LOG((uint8_t *)"[SYSTEM] BKPSRAM Init : OK.");
SYSCFG_CompensationCellCmd(ENABLE);
/* Enable RNG clock source */
RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE);
/* RNG Peripheral enable */
RNG_Cmd(ENABLE);
return 0;
}
void Init_Cpu(void)
{
__set_PSP((uint32_t)msp_top);
__set_PRIMASK(1);
__set_FAULTMASK(1);
__set_CONTROL(0);
#if (CN_CPU_OPTIONAL_FPU == 1)
startup_scb_reg->CPACR = (3UL << 20)|(3UL << 22); //使能FPU
startup_scb_reg->FPCCR = (1UL << 31); //关闭lazy stacking
#endif
switch(startup_scb_reg->CPUID)
{
}
extern void SysClockInit(void);
SysClockInit();
#ifdef USE_HAL_DRIVER
HAL_TickInit();
#endif
extern void SRAM_Init(void);
SRAM_Init();
IAP_SelectLoadProgam();
}
/*
实验名称：Flexbus驱动ARAM
实验平台：渡鸦开发板
板载芯片：MK60DN512ZVQ10
实验效果：测试外挂的SRAM工作情况
具体的SRAM应用请参见sram.c文件
*/
int main(void)
{
DelayInit();
DelayMs(10);
GPIO_QuickInit(HW_GPIOE, 6, kGPIO_Mode_OPP);
UART_QuickInit(UART0_RX_PD06_TX_PD07, 115200);
printf("Flexbus SRAM test\r\n");
/* 初始化外部SRAM */
SRAM_Init();
/* SRAM 自测 */
if(!SRAM_SelfTest())
{
printf("sram test ok!\r\n");
}
else
{
printf("sram test failed!\r\n");
}
while(1)
{
GPIO_ToggleBit(HW_GPIOE, 6);
DelayMs(500);
}
}
void Sram_thread_entry(void* parameter)
{
rt_tick_t t1,t2;
SRAM_Init();
Fill_Buffer(aTxBuffer, BUFFER_SIZE, 0xA244250F);
//DMA_Config();
// while(flag)
// {
// rt_thread_delay(1);
// }
rt_sem_take(&rt_sram_sem, RT_WAITING_FOREVER);
while(flag1)
{
int fd;
//int i=1024;
fd = open("/ud/text.txt", O_WRONLY | O_CREAT,0);
if (fd >= 0)
{
t1 = rt_tick_get();
// while(i>0)
// {
write(fd, RAM_Buffer, sizeof(RAM_Buffer));
// i--;
// }
t2 = rt_tick_get();
rt_kprintf("%d\n\r",t2-t1);
close(fd);
}
rt_thread_delay(100);
//SRAM_ReadBuffer(aTxBuffer,0,BUFFER_SIZE);
}
while(1);
//Fill_Buffer(aTxBuffer, BUFFER_SIZE, 0xA244250F);
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f10x_xx.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f10x.c file
*/
/* Initialize Leds mounted on STM3210X-EVAL board */
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
/* Write/read to/from FSMC SRAM memory *************************************/
/* Enable the FSMC Clock */
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
/* Configure FSMC Bank1 NOR/SRAM3 */
SRAM_Init();
/* Write data to FSMC SRAM memory */
/* Fill the buffer to send */
Fill_Buffer(TxBuffer, BUFFER_SIZE, 0x3212);
SRAM_WriteBuffer(TxBuffer, WRITE_READ_ADDR, BUFFER_SIZE);
/* Read data from FSMC SRAM memory */
SRAM_ReadBuffer(RxBuffer, WRITE_READ_ADDR, BUFFER_SIZE);
/* Read back SRAM memory and check content correctness */
for (Index = 0x00; (Index < BUFFER_SIZE) && (WriteReadStatus == 0); Index++)
{
if (RxBuffer[Index] != TxBuffer[Index])
{
WriteReadStatus = Index + 1;
}
}
if (WriteReadStatus == 0)
{
/* OK */
/* Turn on LED1 */
STM_EVAL_LEDOn(LED1);
}
else
{
/* KO */
/* Turn on LED2 */
STM_EVAL_LEDOn(LED2);
}
while (1)
{
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
files (startup_stm32f40_41xxx.s/startup_stm32f427_437xx.s/
startup_stm32f429_439xx.s/startup_stm32f401xx.s) before to branch to
application main. To reconfigure the default setting of SystemInit()
function, refer to system_stm32f4xx.c file
*/
/* Initialize LEDs on EVAL board */
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
/* Initialize the SRAM memory */
SRAM_Init();
/* Fill the buffer to send */
Fill_Buffer(aTxBuffer, BUFFER_SIZE, 0x250F);
/* Write data to the SRAM memory */
SRAM_WriteBuffer(aTxBuffer, WRITE_READ_ADDR, BUFFER_SIZE);
/* Read back data from the SRAM memory */
SRAM_ReadBuffer(aRxBuffer, WRITE_READ_ADDR, BUFFER_SIZE);
/* Check the SRAM memory content correctness */
for (uwIndex = 0; (uwIndex < BUFFER_SIZE) && (uwWriteReadStatus_SRAM == 0); uwIndex++)
{
if (aRxBuffer[uwIndex] != aTxBuffer[uwIndex])
{
uwWriteReadStatus_SRAM++;
}
}
if (uwWriteReadStatus_SRAM)
{
/* KO */
/* Turn on LD2 */
STM_EVAL_LEDOn(LED2);
}
else
{
/* OK */
/* Turn on LD1 */
STM_EVAL_LEDOn(LED1);
}
while (1)
{
}
}
void rt_heap_init(void)
{
rt_err_t err;
volatile static uint8_t SYSHEAP[SYS_HEAP_SIZE];
SRAM_Init();
err = SRAM_SelfTest();
if(err)
rt_system_heap_init((void*)SYSHEAP, (void*)(SYS_HEAP_SIZE + (uint32_t)SYSHEAP));
else
rt_system_heap_init((void*)(SRAM_ADDRESS_BASE), (void*)(SRAM_ADDRESS_BASE + SRAM_SIZE));
}
void Init_Cpu(void)
{
__set_PSP((uint32_t)msp_top);
__set_PRIMASK(1);
__set_FAULTMASK(1);
__set_CONTROL(0);
switch(pg_scb_reg->CPUID)
{
case cn_revision_r0p0:
break; //市场没有版本0的芯片
case cn_revision_r1p0:
pg_scb_reg->CCR |= 1<<bo_scb_ccr_stkalign;
break;
case cn_revision_r1p1:
pg_scb_reg->CCR |= 1<<bo_scb_ccr_stkalign;
break;
case cn_revision_r2p0:break; //好像没什么要做的
}
pg_inflash_fpec_reg->ACR &= ~(u32)0x1f;
pg_inflash_fpec_reg->ACR |= (CN_CFG_MCLK-1)/24000000; //设置等待周期。
pg_inflash_fpec_reg->ACR |= 0x10; //开启预取
if(((pg_rcc_reg->CR & cn_cr_check_mask) != cn_cr_check)
|| ((pg_rcc_reg->CFGR & cn_cfgr_check_mask) != cn_cfgr_check))
{
//开始初始化时钟
//step1:复位时钟控制寄存器
pg_rcc_reg->CR |= (uint32_t)0x00000001;
// 复位 SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], ADCPRE[1:0] MCO[2:0] 位
pg_rcc_reg->CFGR &= (uint32_t)0xF8FF0000;
// 复位 HSEON, CSSON and PLLON 位
pg_rcc_reg->CR &= (uint32_t)0xFEF6FFFF;
// 复位 HSEBYP 位
pg_rcc_reg->CR &= (uint32_t)0xFFFBFFFF;
// 复位 PLLSRC, PLLXTPRE, PLLMUL[3:0] and USBPRE 位
pg_rcc_reg->CFGR &= (uint32_t)0xFF80FFFF;
// 禁止所有中断
pg_rcc_reg->CIR = 0x00000000;
//step2:设置各时钟控制位以及倍频、分频值
pg_rcc_reg->CFGR = cn_cfgr_set+(7<<24); // set clock configuration register
pg_rcc_reg->CR = cn_cr_set; // set clock control register
while(bb_rcc_cr_hserdy ==0);
while(bb_rcc_cr_pllrdy ==0);
}
SRAM_Init();
Load_Preload();
}
void rt_heap_init(void)
{
int ret;
SRAM_Init();
ret = SRAM_SelfTest();
if(ret)
{
// rt_system_heap_init((void*)INIT_STACK, (void*)(sizeof(INIT_STACK) + (uint32_t)INIT_STACK));
}
else
{
rt_system_heap_init((void*)(SRAM_ADDRESS_BASE), (void*)(SRAM_ADDRESS_BASE + SRAM_SIZE));
}
}
/*----------------------------------------------------------------------------
Main function
*----------------------------------------------------------------------------*/
int main (void) {
//SysTick_Config(SystemCoreClock/1000); /* Generate interrupt each 100 ms */
//Initialize the required I/O device libraries
JOY_Init();
LED_Init();
SER_Init();
KBD_Init();
SRAM_Init();
GLCD_Init(); // LCD Initialization
time.min = 0;
time.hours = 12;
time.sec = 0;
USART3->CR1 |= (1<<5); //Enable the "data received" interrupt for USART3
NVIC_EnableIRQ(USART3_IRQn); //Enable interrupts for USART3
NVIC_SetPriority (USART3_IRQn, (1<<__NVIC_PRIO_BITS) - 1);
resetList();
//memcpy(&tailMessage->text,"This is a test of some really random text that I'm sending as part of a text message. I hope it works! Let's keep typing just to see if we can fill up 160 chars",160);
//Here we are manually setting the head node to display a "No Messages" message if we are not storing anything else
memcpy(&headMessage->text,"No Messages",11);
headMessage->length = 11;
headMessage->prev = NULL;
headMessage->next = NULL;
headMessage->rxTime.hours = 0;
headMessage->rxTime.min = 0;
headMessage->rxTime.sec = 0;
displayedMessage = headMessage;
//Initialize the LCD
init_display();
os_sys_init_prio(initTask,0xFE);
}
int main(void)
{
DelayInit();
GPIO_QuickInit(HW_GPIOE, 6, kGPIO_Mode_OPP);
UART_QuickInit(UART0_RX_PD06_TX_PD07, 115200);
printf("OV7620 test\r\n");
ili9320_init();
SRAM_Init();
/* 摄像头速度非常快 把FLexbus 总线速度调到最高 */
SIM->CLKDIV1 &= ~SIM_CLKDIV1_OUTDIV3_MASK;
SIM->CLKDIV1 |= SIM_CLKDIV1_OUTDIV3(0);
OV7620_Init();
SCCB_Init();
while(1)
{
GPIO_ToggleBit(HW_GPIOE, 6);
DelayMs(500);
}
}
int main(void)
{
DelayInit();
GPIO_QuickInit(HW_GPIOE, 6, kGPIO_Mode_OPP);
SRAM_Init();
UART_QuickInit(UART0_RX_PD06_TX_PD07, 115200);
GUI_Init();
GUI_DispString("BMP file test\r\n");
GUI_DispString("please insert SD card...\r\n");
SD_QuickInit(10*1000*1000);
printf("SD size:%dMB\r\n", SD_GetSizeInMB());
FATFS fs_sd;
FATFS *fs = &fs_sd;
/* 挂载文件系统 */
f_mount(fs, "0:", 0);
while(1)
{
scan_files("0:");
GPIO_ToggleBit(HW_GPIOE, 6);
}
}
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f10x_xx.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f10x.c file
*/
/* System Clocks Configuration */
RCC_Configuration();
/* FSMC for SRAM and SRAM pins configuration */
SRAM_Init();
/* Write to FSMC -----------------------------------------------------------*/
/* DMA2 channel5 configuration */
DMA_DeInit(DMA2_Channel5);
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)SRC_Const_Buffer;
DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)Bank1_SRAM3_ADDR;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
DMA_InitStructure.DMA_BufferSize = 32;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Enable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_M2M = DMA_M2M_Enable;
DMA_Init(DMA2_Channel5, &DMA_InitStructure);
/* Enable DMA2 channel5 */
DMA_Cmd(DMA2_Channel5, ENABLE);
/* Check if DMA2 channel5 transfer is finished */
while(!DMA_GetFlagStatus(DMA2_FLAG_TC5));
/* Clear DMA2 channel5 transfer complete flag bit */
DMA_ClearFlag(DMA2_FLAG_TC5);
/* Read from FSMC ----------------------------------------------------------*/
/* Destination buffer initialization */
for(Idx=0; Idx<128; Idx++) DST_Buffer[Idx]=0;
/* DMA1 channel3 configuration */
DMA_DeInit(DMA1_Channel3);
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)Bank1_SRAM3_ADDR;
DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)DST_Buffer;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
DMA_InitStructure.DMA_BufferSize = 128;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Enable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_M2M = DMA_M2M_Enable;
DMA_Init(DMA1_Channel3, &DMA_InitStructure);
/* Enable DMA1 channel3 */
DMA_Cmd(DMA1_Channel3, ENABLE);
/* Check if DMA1 channel3 transfer is finished */
while(!DMA_GetFlagStatus(DMA1_FLAG_TC3));
/* Clear DMA1 channel3 transfer complete flag bit */
DMA_ClearFlag(DMA1_FLAG_TC3);
/* Check if the transmitted and received data are equal */
TransferStatus = Buffercmp(SRC_Const_Buffer, (uint32_t*)DST_Buffer, BufferSize);
/* TransferStatus = PASSED, if the transmitted and received data
are the same */
/* TransferStatus = FAILED, if the transmitted and received data
are different */
while (1)
{
}
}
void Redbull_Init()
{
char buff[128] = { 0 };
USART_STDIO_Init();
Delay_Init();
Button_GPIO_Config();
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
STM3210E_LCD_Init();
LCD_SetFont(&Font8x12);
LCD_SetColors(LCD_COLOR_WHITE, LCD_COLOR_BLACK);
LCD_WriteRAM_Prepare();
for (int i = 0; i < (320 * 240); i++)
{
LCD_WriteRAM(LCD_COLOR_WHITE);
}
for (int i = 0; i < (320 * 240); i++)
{
LCD_WriteRAM(LCD_COLOR_BLACK);
}
LCD_DisplayStringLine(LINE(0), (uint8_t*) " initializing REDBULL");
LCD_DisplayStringLine(LINE(1), (uint8_t*) " CPU ...............................");
sprintf(buff, "ARM Cortex-M3 @ %dMHz", (int) SystemCoreClock / 1000000);
printRight(1, buff);
LCD_DisplayStringLine(LINE(2), (uint8_t*) " LCD ............................320x240");
LCD_DisplayStringLine(LINE(3), (uint8_t*) " LED ..................................");
LED_Init();
toggleLED(LED1_PIN, 0);
toggleLED(LED2_PIN, LED1_PIN);
toggleLED(LED3_PIN, LED2_PIN);
toggleLED(LED4_PIN, LED3_PIN);
toggleLED(LED5_PIN, LED4_PIN);
toggleLED(LED4_PIN, LED5_PIN);
toggleLED(LED3_PIN, LED4_PIN);
toggleLED(LED2_PIN, LED3_PIN);
toggleLED(LED1_PIN, LED2_PIN);
toggleLED(0, LED1_PIN);
printRight(3, "5");
LCD_DisplayStringLine(LINE(4), (uint8_t*) " RTC ................");
RTC_Init();
RTC_t rtc = { .year = 2011, .month = 12, .mday = 19, .hour = 21, .min = 00 };
//RTC_SetTime(&rtc);
RTC_GetTime(&rtc);
sprintf(buff, "%04d/%02d/%02d %02d:%02d:%02d", rtc.year, rtc.month, rtc.mday, rtc.hour, rtc.min, rtc.sec);
printRight(4, buff);
LCD_DisplayStringLine(LINE(5), (uint8_t*) " USB .................................");
Set_USBClock();
Set_System();
USB_Interrupts_Config();
USB_Init();
printRight(5, "ok");
//IS61LV25616 (512KB)
LCD_DisplayStringLine(LINE(6), (uint8_t*) " SRAM ................................");
SRAM_Init();
uint32_t* RAM = (uint32_t*) Bank1_SRAM3_ADDR;
uint8_t TESTOK = 1;
for (uint32_t i = 0; i < (512 * 1024) / 4; i++)
{
RAM[i] = i;
}
for (uint32_t i = 0; i < (512 * 1024) / 4; i++)
{
if (RAM[i] != i)
{
TESTOK = 0;
}
RAM[i] = 0;
}
if (TESTOK)
{
printRight(6, "IS61LV25616 512KB");
}
else
{
printRight(6, "fail");
}
//M29W128F (2MB)
LCD_DisplayStringLine(LINE(7), (uint8_t*) " NOR .................................");
NOR_Init();
NOR_IDTypeDef norid;
NOR_ReadID(&norid);
printRight(7, "MX29LV160D 2MB");
//HY27UF081G2A (128MB)
LCD_DisplayStringLine(LINE(8), (uint8_t*) " NAND ................................");
NAND_Init();
NAND_IDTypeDef nandid;
NAND_ReadID(&nandid);
printRight(8, "HY27UF081G2A 128MB");
LCD_DisplayStringLine(LINE(9), (uint8_t*) " SDIO ................................");
SD_Init();
SD_CardInfo cardinfo;
SD_GetCardInfo(&cardinfo);
printRight(9, "ok");
}
