void CActorInstance::AttachWeapon(DWORD dwParentPartIndex, DWORD dwPartIndex, CItemData * pItemData)
{
// assert(m_pkCurRaceData);
if (!pItemData)
return;
const char * szBoneName;
if (!GetAttachingBoneName(dwPartIndex, &szBoneName))
return;
// NOTE : (이도류처리)단도일 경우 형태가 다른 것으로 얻는다. 없을 경우 디폴트를 리턴
if (CRaceData::PART_WEAPON_LEFT == dwPartIndex)
{
RegisterModelThing(dwPartIndex, pItemData->GetSubModelThing());
}
else
{
RegisterModelThing(dwPartIndex, pItemData->GetModelThing());
}
for (DWORD i = 0; i < pItemData->GetLODModelThingCount(); ++i)
{
CGraphicThing * pThing;
if (!pItemData->GetLODModelThingPointer(i, &pThing))
continue;
RegisterLODThing(dwPartIndex, pThing);
}
SetModelInstance(dwPartIndex, dwPartIndex, 0);
AttachModelInstance(dwParentPartIndex, szBoneName, dwPartIndex);
// 20041208.myevan.무기스펙큘러(값옷은 SetShape에서 직접 해준다.)
if (USE_WEAPON_SPECULAR)
{
SMaterialData kMaterialData;
kMaterialData.pImage = NULL;
kMaterialData.isSpecularEnable = TRUE;
kMaterialData.fSpecularPower = pItemData->GetSpecularPowerf();
kMaterialData.bSphereMapIndex = 1;
SetMaterialData(dwPartIndex, NULL, kMaterialData);
}
// Weapon Trace
if (__IsWeaponTrace(pItemData->GetWeaponType()))
{
CWeaponTrace * pWeaponTrace = CWeaponTrace::New();
pWeaponTrace->SetWeaponInstance(this, dwPartIndex, szBoneName);
m_WeaponTraceVector.push_back(pWeaponTrace);
}
}
bool CMDXHTMLWriter::WriteHeader()
{
FILE *pFile = NULL;
if( fopen_s( &pFile, m_strFilePath.c_str(), "w" ) != 0 )
{
//fclose( pFile );
return false;
}
SetMaterialData();
SetMachineData();
fprintf_s(pFile, "<Html>\n");
fprintf_s(pFile, "<head>\n");
//強制編碼以防中文亂碼產生
fprintf_s(pFile, "<meta http-equiv=""Content-Type"" content=""text/html; charset=big5"">\n");
fprintf_s(pFile, "</head>\n");
fprintf_s(pFile, "<title>成型條件試模表</title>");
fprintf_s(pFile, "<body>");
//頁首--------------------------------------------
fprintf_s(pFile, "<header>\n");
fprintf_s(pFile, "<p>\n");
fprintf_s(pFile, "本表結果使用[試模表單產生器 beta 3.1]估算後生成\n");
fprintf_s(pFile, "</p>\n");
fprintf_s(pFile, "</header>\n");
fprintf_s(pFile, "<table border=""1"" style=""width:650px"">\n");
//產品資訊--------------------------------------------
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<th colspan=""6"">1. 產品資訊</th>\n");
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>產品尺寸</td>\n");
fprintf_s(pFile, "<td colspan=""2"">%.2lf x %.2lf x %.2lf mm</td>\n",
DataCenter::getInstance().GetPartLength(),
DataCenter::getInstance().GetPartWidth(),
DataCenter::getInstance().GetPartHeight());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>產品肉厚</td>\n");
fprintf_s(pFile, "<td colspan=""2"">%.1f mm (%.1f~%.1f mm)</td>\n",
DataCenter::getInstance().GetAvgPartThickness(),
DataCenter::getInstance().GetMinPartThickness(),
DataCenter::getInstance().GetMaxPartThickness());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>產品體積</td>\n");
fprintf_s(pFile, "<td colspan=""2"">%.2f cc</td>\n",
DataCenter::getInstance().GetPartVolume());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>冷流道體積</td>\n");
fprintf_s(pFile, "<td colspan=""2"">%.2f cc</td>\n",
DataCenter::getInstance().GetColdRunnerVolume());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>材料</td>\n");
fprintf_s(pFile, "<td colspan=""2"">%s</td>\n", m_sMaterialType);
fprintf_s(pFile, "<td bgcolor=#E6E6E6>材料型號</td>\n");
fprintf_s(pFile, "<td colspan=""2"">%s</td>\n", m_sMaterialGrade);
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>料溫範圍</td>\n");
fprintf_s(pFile, "<td colspan=""2"">%.0f ~ %.0f ℃</td>\n",
DataCenter::getInstance().GetMinMeltTemp(),
DataCenter::getInstance().GetMaxMeltTemp());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>模溫範圍</td>\n");
fprintf_s(pFile, "<td colspan=""2"">%.0f ~ %.0f ℃</td>\n",
DataCenter::getInstance().GetMinMoldTemp(),
DataCenter::getInstance().GetMaxMoldTemp());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td colspan=""6""> </td>\n");
fprintf_s(pFile, "</tr>\n");
//機台規格--------------------------------------------
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<th colspan=""6"">2. 機台規格</th>\n");
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>製造商</td>\n");
fprintf_s(pFile, "<td>%s</td>\n", m_sMachineProducer);
fprintf_s(pFile, "<td bgcolor=#E6E6E6>鎖模力</td>\n");
fprintf_s(pFile, "<td>%.0f Ton</td>\n",
DataCenter::getInstance().GetClampForce());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>螺桿直徑</td>\n");
fprintf_s(pFile, "<td>%.2f mm</td>\n",
DataCenter::getInstance().GetDiaScrew());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>型號</td>\n");
fprintf_s(pFile, "<td>%s-%.0f-%.0f</td>\n",
m_sMachineGrade,
DataCenter::getInstance().GetClampForce(),
DataCenter::getInstance().GetDiaScrew());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>射出量</td>\n");
fprintf_s(pFile, "<td>%.0f g</td>\n",
DataCenter::getInstance().GetInjectionVolume());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>最大螺桿行程</td>\n");
fprintf_s(pFile, "<td>%.0f mm</td>\n",
DataCenter::getInstance().GetMaxScrewStroke());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>最大射出量</td>\n");
fprintf_s(pFile, "<td>%.0f cc/s</td>\n",
DataCenter::getInstance().GetMaxVolumeOutput());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>最大射速</td>\n");
fprintf_s(pFile, "<td>%.0f mm/s</td>\n",
DataCenter::getInstance().GetMaxInjectionVelocity());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>最大射出壓力</td>\n");
fprintf_s(pFile, "<td>%.0f MPa</td>\n",
DataCenter::getInstance().GetMaxInjectionPressure());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td colspan=""6""> </td>\n");
fprintf_s(pFile, "</tr>\n");
//加工條件--------------------------------------------
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<th colspan=""6"">3. 加工條件</th>\n");
fprintf_s(pFile, "</tr>\n");
//充填
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6 colspan=""6"">射出設定</td>\n");
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>充填時間</td>\n");
fprintf_s(pFile, "<td>%.1f sec</td>\n",
DataCenter::getInstance().GetFillTime());
fprintf_s(pFile,
"<td bgcolor=#E6E6E6 colspan=""4"">註：充填時間以射出螺桿實際前進時間為準，不含保壓時間</td>\n");
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>段數</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>I</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>II</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>III</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>IV</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>V</td>\n");
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>速度(mm/s)</td>\n");
if (DataCenter::getInstance().GetFilllSel() == 0) //單段充填
{
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetFillSpeedSingle());
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
else //三段充填
{
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetFillSpeedMulti(1));
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetFillSpeedMulti(2));
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetFillSpeedMulti(3));
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>壓力(MPa)</td>\n");
if (DataCenter::getInstance().GetFilllSel() == 0) //單段充填
{
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetInjectionPressure());
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
else //三段充填
{
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetInjectionPressure());
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetInjectionPressure());
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetInjectionPressure());
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>位置(mm)</td>\n");
if (DataCenter::getInstance().GetFilllSel() == 0) //單段充填
{
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetScrewStrokeSingle());
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
else //三段充填
{
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetScrewStrokeMulti(1));
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetScrewStrokeMulti(2));
fprintf_s(pFile, "<td>%.1f</td>\n",
DataCenter::getInstance().GetScrewStrokeMulti(3));
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td colspan=""6""> </td>\n");
fprintf_s(pFile, "</tr>\n");
//保壓
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6 colspan=""6"">保壓設定</td>\n");
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>保壓時間</td>\n");
fprintf_s(pFile, "<td>%.1f sec</td>\n",
DataCenter::getInstance().GetPackTime());
fprintf_s(pFile, "<td bgcolor=#E6E6E6 colspan=""2"">保壓切換位置(VP)</td>\n");
fprintf_s(pFile, "<td>%.1f mm</td>\n",
DataCenter::getInstance().GetVP());
double vp_percent = 100.0 * (1.0 - (DataCenter::getInstance().GetVP()
/ DataCenter::getInstance().GetMaxScrewStroke()));
fprintf_s(pFile, "<td>%.1f %%</td>\n", vp_percent);
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>段數</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>I</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>II</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>III</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>IV</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>V</td>\n");
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>壓力(MPa)</td>\n");
double pp_1 = DataCenter::getInstance().GetMachinePressure() *
0.01 * DataCenter::getInstance().GetPackPressurePercent(1);
double pp_2 = DataCenter::getInstance().GetMachinePressure() *
0.01 * DataCenter::getInstance().GetPackPressurePercent(2);
if (DataCenter::getInstance().GetPackSel() == 0) //單段保壓
{
fprintf_s(pFile, "<td>%.1f</td>\n", pp_1);
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
else //二段保壓
{
fprintf_s(pFile, "<td>%.1f</td>\n", pp_1);
fprintf_s(pFile, "<td>%.1f</td>\n", pp_2);
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>時間(sec)</td>\n");
if (DataCenter::getInstance().GetPackSel() == 0) //單段保壓
{
fprintf_s(pFile, "<td>%.1f</td>\n", DataCenter::getInstance().GetPackTime());
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
else //二段保壓
{
double pt_1 = DataCenter::getInstance().GetPackTime() *
DataCenter::getInstance().GetPackTimeRatio(1) /
(DataCenter::getInstance().GetPackTimeRatio(1) + DataCenter::getInstance().GetPackTimeRatio(2));
double pt_2 = DataCenter::getInstance().GetPackTime() *
DataCenter::getInstance().GetPackTimeRatio(2) /
(DataCenter::getInstance().GetPackTimeRatio(1) + DataCenter::getInstance().GetPackTimeRatio(2));;
fprintf_s(pFile, "<td>%.1f</td>\n", pt_1);
fprintf_s(pFile, "<td>%.1f</td>\n", pt_2);
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
fprintf_s(pFile, "<td></td>\n");
}
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td colspan=""6""> </td>\n");
fprintf_s(pFile, "</tr>\n");
//其他
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6 colspan=""2"" rowspan=""2"">塑料溫度 (℃)</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>射嘴</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>第一段料管</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>第二段料管</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>第三段料管</td>\n");
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td>%.0f</td>\n", DataCenter::getInstance().GetMeltTemp());
fprintf_s(pFile, "<td>%.0f</td>\n", DataCenter::getInstance().GetBarrelTemp(1));
fprintf_s(pFile, "<td>%.0f</td>\n", DataCenter::getInstance().GetBarrelTemp(2));
fprintf_s(pFile, "<td>%.0f</td>\n", DataCenter::getInstance().GetBarrelTemp(3));
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6 colspan=""2"">模具溫度</td>\n");
fprintf_s(pFile, "<td>☑ 公模 %.0f ℃</td>\n",
DataCenter::getInstance().GetMoldTempCore());
fprintf_s(pFile, "<td>☑ 母模 %.0f ℃</td>\n",
DataCenter::getInstance().GetMoldTempCavity());
fprintf_s(pFile, "<td bgcolor=#E6E6E6>冷卻時間</td>\n");
fprintf_s(pFile, "<td>%.1f sec</td>\n", DataCenter::getInstance().GetCoolTime());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6 colspan=""2"">冷卻液種類</td>\n");
fprintf_s(pFile, "<td>☐ 水</td>\n");
fprintf_s(pFile, "<td>☐ 油</td>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6>成型周期</td>\n");
fprintf_s(pFile, "<td>%.1f sec</td>\n", DataCenter::getInstance().GetCycleTime());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "<tr>\n");
fprintf_s(pFile, "<td bgcolor=#E6E6E6 colspan=""2"">料管滯留時間</td>\n");
fprintf_s(pFile, "<td>%.1f sec</td>\n", DataCenter::getInstance().GetResidenceTime());
fprintf_s(pFile, "</tr>\n");
fprintf_s(pFile, "</table>\n");
//頁尾--------------------------------------------
fprintf_s(pFile, "<footer>\n");
fprintf_s(pFile, "<p>\n");
fprintf_s(pFile, "Moldex3D ©2014\n");
fprintf_s(pFile, "</p>\n");
fprintf_s(pFile, "</footer>\n");
//fprintf_s(pFile, "MoldTemperature = %f", 120);
fprintf_s(pFile, "</body>");
fprintf_s(pFile, "</Html>\n");
fclose(pFile);
return true;
}
