const wxString D_PAD::GetPadName() const
{
wxString name;
StringPadName( name );
return name;
}
const wxString D_PAD::GetPadName() const
{
#if 0 // m_Padname is not ASCII and not UTF8, it is LATIN1 basically, whatever
// 8 bit font is supported in KiCad plotting and drawing.
// Return pad name as wxString, assume it starts as a non-terminated
// utf8 character sequence
char temp[sizeof(m_Padname)+1]; // a place to terminate with '\0'
strncpy( temp, m_Padname, sizeof(m_Padname) );
temp[sizeof(m_Padname)] = 0;
return FROM_UTF8( temp );
#else
wxString name;
StringPadName( name );
return name;
#endif
}
void D_PAD::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM>& aList )
{
MODULE* module;
wxString Line;
BOARD* board;
module = (MODULE*) m_Parent;
if( module )
{
wxString msg = module->GetReference();
aList.push_back( MSG_PANEL_ITEM( _( "Footprint" ), msg, DARKCYAN ) );
StringPadName( Line );
aList.push_back( MSG_PANEL_ITEM( _( "Pad" ), Line, BROWN ) );
}
aList.push_back( MSG_PANEL_ITEM( _( "Net" ), GetNetname(), DARKCYAN ) );
/* For test and debug only: display m_physical_connexion and
* m_logical_connexion */
#if 1 // Used only to debug connectivity calculations
Line.Printf( wxT( "%d-%d-%d " ), GetSubRatsnest(), GetSubNet(), GetZoneSubNet() );
aList.push_back( MSG_PANEL_ITEM( wxT( "L-P-Z" ), Line, DARKGREEN ) );
#endif
board = GetBoard();
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ),
LayerMaskDescribe( board, m_layerMask ), DARKGREEN ) );
aList.push_back( MSG_PANEL_ITEM( ShowPadShape(), ShowPadAttr(), DARKGREEN ) );
Line = ::CoordinateToString( m_Size.x );
aList.push_back( MSG_PANEL_ITEM( _( "Width" ), Line, RED ) );
Line = ::CoordinateToString( m_Size.y );
aList.push_back( MSG_PANEL_ITEM( _( "Height" ), Line, RED ) );
Line = ::CoordinateToString( (unsigned) m_Drill.x );
if( GetDrillShape() == PAD_DRILL_SHAPE_CIRCLE )
{
aList.push_back( MSG_PANEL_ITEM( _( "Drill" ), Line, RED ) );
}
else
{
Line = ::CoordinateToString( (unsigned) m_Drill.x );
wxString msg;
msg = ::CoordinateToString( (unsigned) m_Drill.y );
Line += wxT( "/" ) + msg;
aList.push_back( MSG_PANEL_ITEM( _( "Drill X / Y" ), Line, RED ) );
}
double module_orient = module ? module->GetOrientation() : 0;
if( module_orient )
Line.Printf( wxT( "%3.1f(+%3.1f)" ),
( m_Orient - module_orient ) / 10.0,
module_orient / 10.0 );
else
Line.Printf( wxT( "%3.1f" ), m_Orient / 10.0 );
aList.push_back( MSG_PANEL_ITEM( _( "Angle" ), Line, LIGHTBLUE ) );
Line = ::CoordinateToString( m_Pos.x ) + wxT( ", " ) + ::CoordinateToString( m_Pos.y );
aList.push_back( MSG_PANEL_ITEM( _( "Position" ), Line, LIGHTBLUE ) );
if( GetPadToDieLength() )
{
Line = ::CoordinateToString( GetPadToDieLength() );
aList.push_back( MSG_PANEL_ITEM( _( "Length in package" ), Line, CYAN ) );
}
}
void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
{
wxPoint coord[4];
double angle = m_Orient;
int seg_width;
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
// calculate pad shape position :
wxPoint shape_pos = ShapePos() - aDrawInfo.m_Offset;
wxSize halfsize = m_Size;
halfsize.x >>= 1;
halfsize.y >>= 1;
switch( GetShape() )
{
case PAD_CIRCLE:
if( aDrawInfo.m_ShowPadFilled )
GRFilledCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x, 0,
aDrawInfo.m_Color, aDrawInfo.m_Color );
else
GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x,
m_PadSketchModePenSize, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
GRCircle( aClipBox,
aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_PadClearance,
0, aDrawInfo.m_Color );
}
break;
case PAD_OVAL:
{
wxPoint segStart, segEnd;
seg_width = BuildSegmentFromOvalShape(segStart, segEnd, angle,
aDrawInfo.m_Mask_margin);
segStart += shape_pos;
segEnd += shape_pos;
if( aDrawInfo.m_ShowPadFilled )
{
GRFillCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
else
{
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, m_PadSketchModePenSize, aDrawInfo.m_Color );
}
// Draw the clearance line
if( aDrawInfo.m_PadClearance )
{
seg_width += 2 * aDrawInfo.m_PadClearance;
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
}
break;
case PAD_RECT:
case PAD_TRAPEZOID:
BuildPadPolygon( coord, aDrawInfo.m_Mask_margin, angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, aDrawInfo.m_ShowPadFilled,
aDrawInfo.m_ShowPadFilled ? 0 : m_PadSketchModePenSize,
aDrawInfo.m_Color, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
BuildPadPolygon( coord, wxSize( aDrawInfo.m_PadClearance,
aDrawInfo.m_PadClearance ), angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, 0, aDrawInfo.m_Color, aDrawInfo.m_Color );
}
break;
default:
break;
}
// Draw the pad hole
wxPoint holepos = m_Pos - aDrawInfo.m_Offset;
int hole = m_Drill.x >> 1;
bool drawhole = hole > 0;
if( !aDrawInfo.m_ShowPadFilled && !aDrawInfo.m_ShowNotPlatedHole )
drawhole = false;
if( drawhole )
{
bool blackpenstate = false;
if( aDrawInfo.m_IsPrinting )
{
blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
aDrawInfo.m_HoleColor = WHITE;
}
if( aDrawInfo.m_DrawMode != GR_XOR )
GRSetDrawMode( aDC, GR_COPY );
else
GRSetDrawMode( aDC, GR_XOR );
EDA_COLOR_T hole_color = aDrawInfo.m_HoleColor;
if( aDrawInfo. m_ShowNotPlatedHole ) // Draw a specific hole color
hole_color = aDrawInfo.m_NPHoleColor;
switch( GetDrillShape() )
{
case PAD_DRILL_CIRCLE:
if( aDC->LogicalToDeviceXRel( hole ) > MIN_DRAW_WIDTH )
GRFilledCircle( aClipBox, aDC, holepos.x, holepos.y, hole, 0,
hole_color, hole_color );
break;
case PAD_DRILL_OBLONG:
{
wxPoint drl_start, drl_end;
GetOblongDrillGeometry( drl_start, drl_end, seg_width );
GRFilledSegment( aClipBox, aDC, holepos + drl_start,
holepos + drl_end, seg_width, hole_color );
}
break;
default:
break;
}
if( aDrawInfo.m_IsPrinting )
GRForceBlackPen( blackpenstate );
}
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
// Draw "No connect" ( / or \ or cross X ) if necessary
if( GetNetCode() == 0 && aDrawInfo.m_ShowNCMark )
{
int dx0 = std::min( halfsize.x, halfsize.y );
EDA_COLOR_T nc_color = BLUE;
if( m_layerMask[F_Cu] ) /* Draw \ */
GRLine( aClipBox, aDC, holepos.x - dx0, holepos.y - dx0,
holepos.x + dx0, holepos.y + dx0, 0, nc_color );
if( m_layerMask[B_Cu] ) // Draw /
GRLine( aClipBox, aDC, holepos.x + dx0, holepos.y - dx0,
holepos.x - dx0, holepos.y + dx0, 0, nc_color );
}
if( aDrawInfo.m_DrawMode != GR_XOR )
GRSetDrawMode( aDC, GR_COPY );
else
GRSetDrawMode( aDC, GR_XOR );
// Draw the pad number
if( !aDrawInfo.m_Display_padnum && !aDrawInfo.m_Display_netname )
return;
wxPoint tpos0 = shape_pos; // Position of the centre of text
wxPoint tpos = tpos0;
wxSize AreaSize; // size of text area, normalized to AreaSize.y < AreaSize.x
int shortname_len = 0;
if( aDrawInfo.m_Display_netname )
shortname_len = GetShortNetname().Len();
if( GetShape() == PAD_CIRCLE )
angle = 0;
AreaSize = m_Size;
if( m_Size.y > m_Size.x )
{
angle += 900;
AreaSize.x = m_Size.y;
AreaSize.y = m_Size.x;
}
if( shortname_len > 0 ) // if there is a netname, provides room to display this netname
{
AreaSize.y /= 2; // Text used only the upper area of the
// pad. The lower area displays the net name
tpos.y -= AreaSize.y / 2;
}
// Calculate the position of text, that is the middle point of the upper
// area of the pad
RotatePoint( &tpos, shape_pos, angle );
// Draw text with an angle between -90 deg and + 90 deg
double t_angle = angle;
NORMALIZE_ANGLE_90( t_angle );
/* Note: in next calculations, texte size is calculated for 3 or more
* chars. Of course, pads numbers and nets names can have less than 3
* chars. but after some tries, i found this is gives the best look
*/
#define MIN_CHAR_COUNT 3
wxString buffer;
int tsize;
EDA_RECT* clipBox = aDrawInfo.m_DrawPanel?
aDrawInfo.m_DrawPanel->GetClipBox() : NULL;
if( aDrawInfo.m_Display_padnum )
{
StringPadName( buffer );
int numpad_len = buffer.Len();
numpad_len = std::max( numpad_len, MIN_CHAR_COUNT );
tsize = std::min( AreaSize.y, AreaSize.x / numpad_len );
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE ) // Not drawable when size too small.
{
// tsize reserve room for marges and segments thickness
tsize = ( tsize * 7 ) / 10;
DrawGraphicHaloText( clipBox, aDC, tpos,
aDrawInfo.m_Color, BLACK, WHITE,
buffer, t_angle,
wxSize( tsize , tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
// display the short netname, if exists
if( shortname_len == 0 )
return;
shortname_len = std::max( shortname_len, MIN_CHAR_COUNT );
tsize = std::min( AreaSize.y, AreaSize.x / shortname_len );
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE ) // Not drawable in size too small.
{
tpos = tpos0;
if( aDrawInfo.m_Display_padnum )
tpos.y += AreaSize.y / 2;
RotatePoint( &tpos, shape_pos, angle );
// tsize reserve room for marges and segments thickness
tsize = ( tsize * 7 ) / 10;
DrawGraphicHaloText( clipBox, aDC, tpos,
aDrawInfo.m_Color, BLACK, WHITE,
GetShortNetname(), t_angle,
wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
