/************************************************************************
* Function: void GfxTconSetIO(BYTE mask, BYTE level)
*
* Overview: This sets the IO specified by mask to the value set by
* level.
*
* Input: mask - specifies the IO to be toggles.
* level - specifies the logic where the IO will be set.
*
* Output: none
*
************************************************************************/
void GfxTconSetIO(BYTE mask, BYTE level)
{
#if defined (GFX_USE_DISPLAY_CONTROLLER_MCHP_DA210) || defined (GFX_USE_DISPLAY_CONTROLLER_DMA)
switch(mask)
{
case BB_CS: (level == 1 ? TCON_CSHigh() : TCON_CSLow());
break;
case BB_SCL: (level == 1 ? TCON_CLKHigh() : TCON_CLKLow());
break;
case BB_SDO: (level == 1 ? TCON_DataHigh() : TCON_DataLow());
break;
case BB_DC: (level == 1 ? TCON_SetData() : TCON_SetCommand());
break;
default:
break;
}
Nop();
#elif defined (GFX_USE_DISPLAY_CONTROLLER_SSD1926)
static BYTE value = 0xFF;
if(level == 0)
{
value &= ~mask;
}
else
{
value |= mask;
}
SetCtrlBitBangedIO(0xAC, value);
#endif
}
/************************************************************************
* Function: void GfxTconSetIO(BYTE mask, BYTE level)
*
* Overview: This sets the IO specified by mask to the value set by
* level.
*
* Input: mask - specifies the IO to be toggles.
* level - specifies the logic where the IO will be set.
*
* Output: none
*
************************************************************************/
void GfxTconSetIO(BYTE mask, BYTE level)
{
#if defined (GFX_USE_DISPLAY_CONTROLLER_MCHP_DA210) || defined (GFX_USE_DISPLAY_CONTROLLER_DMA)
switch(mask)
{
case BB_CS: (level == 1 ? TCON_CSHigh() : TCON_CSLow());
break;
case BB_SCL: (level == 1 ? TCON_CLKHigh() : TCON_CLKLow());
break;
case BB_SDO: (level == 1 ? TCON_DataHigh() : TCON_DataLow());
break;
case BB_DC: (level == 1 ? TCON_SetData() : TCON_SetCommand());
break;
default:
break;
}
Nop();
#elif defined (GFX_USE_DISPLAY_CONTROLLER_SSD1926)
static BYTE value = 0xFF;
if(level == 0)
{
value &= ~mask;
}
else
{
value |= mask;
}
SetCtrlBitBangedIO(0xAC, value);
#elif defined (GFX_USE_DISPLAY_CONTROLLER_S1D13517)
static BYTE temp = 0;
switch(mask)
{
case BB_CS:
temp = GetReg(REG6E_GPO_1);
if(level == 1) temp |= 0x02;
else temp &= 0xFD;
SetReg(REG6E_GPO_1,temp);
break;
case BB_SCL: TCON_SCL_PORT = level;
break;
case BB_SDO: TCON_SDO_PORT = level;
break;
case BB_DC:
temp = GetReg(REG6E_GPO_1);
if(level == 1) temp |= 0x04;
else temp &= 0xFB;
SetReg(REG6E_GPO_1,temp);
break;
}
Nop();
#else
#error "This TCON_SSD1289 is written for SSD1926, S1D13517 and Microchip Graphics Module driver. If you are not using those drivers you may need to re-write this driver and remove this error message."
#endif
}
