TIFF*
TIFFClientOpen(
const char* name, const char* mode,
thandle_t clientdata,
TIFFReadWriteProc readproc,
TIFFReadWriteProc writeproc,
TIFFSeekProc seekproc,
TIFFCloseProc closeproc,
TIFFSizeProc sizeproc,
TIFFMapFileProc mapproc,
TIFFUnmapFileProc unmapproc
)
{
static const char module[] = "TIFFClientOpen";
TIFF *tif;
int m;
const char* cp;
/* The following are configuration checks. They should be redundant, but should not
* compile to any actual code in an optimised release build anyway. If any of them
* fail, (makefile-based or other) configuration is not correct */
assert(sizeof(uint8)==1);
assert(sizeof(int8)==1);
assert(sizeof(uint16)==2);
assert(sizeof(int16)==2);
assert(sizeof(uint32)==4);
assert(sizeof(int32)==4);
assert(sizeof(uint64)==8);
assert(sizeof(int64)==8);
assert(sizeof(tmsize_t)==sizeof(void*));
{
union{
uint8 a8[2];
uint16 a16;
} n;
n.a8[0]=1;
n.a8[1]=0;
#ifdef WORDS_BIGENDIAN
assert(n.a16==256);
#else
assert(n.a16==1);
#endif
}
m = _TIFFgetMode(mode, module);
if (m == -1)
goto bad2;
tif = (TIFF *)_TIFFmalloc((tmsize_t)(sizeof (TIFF) + strlen(name) + 1));
if (tif == NULL) {
TIFFErrorExt(clientdata, module, "%s: Out of memory (TIFF structure)", name);
goto bad2;
}
_TIFFmemset(tif, 0, sizeof (*tif));
tif->tif_name = (char *)tif + sizeof (TIFF);
strcpy(tif->tif_name, name);
tif->tif_mode = m &~ (O_CREAT|O_TRUNC);
tif->tif_curdir = (uint16) -1; /* non-existent directory */
tif->tif_curoff = 0;
tif->tif_curstrip = (uint32) -1; /* invalid strip */
tif->tif_row = (uint32) -1; /* read/write pre-increment */
tif->tif_clientdata = clientdata;
if (!readproc || !writeproc || !seekproc || !closeproc || !sizeproc) {
TIFFErrorExt(clientdata, module,
"One of the client procedures is NULL pointer.");
goto bad2;
}
tif->tif_readproc = readproc;
tif->tif_writeproc = writeproc;
tif->tif_seekproc = seekproc;
tif->tif_closeproc = closeproc;
tif->tif_sizeproc = sizeproc;
if (mapproc)
tif->tif_mapproc = mapproc;
else
tif->tif_mapproc = _tiffDummyMapProc;
if (unmapproc)
tif->tif_unmapproc = unmapproc;
else
tif->tif_unmapproc = _tiffDummyUnmapProc;
_TIFFSetDefaultCompressionState(tif); /* setup default state */
/*
* Default is to return data MSB2LSB and enable the
* use of memory-mapped files and strip chopping when
* a file is opened read-only.
*/
tif->tif_flags = FILLORDER_MSB2LSB;
if (m == O_RDONLY )
tif->tif_flags |= TIFF_MAPPED;
#ifdef STRIPCHOP_DEFAULT
if (m == O_RDONLY || m == O_RDWR)
tif->tif_flags |= STRIPCHOP_DEFAULT;
#endif
/*
* Process library-specific flags in the open mode string.
* The following flags may be used to control intrinsic library
* behaviour that may or may not be desirable (usually for
* compatibility with some application that claims to support
* TIFF but only supports some braindead idea of what the
* vendor thinks TIFF is):
*
* 'l' use little-endian byte order for creating a file
* 'b' use big-endian byte order for creating a file
* 'L' read/write information using LSB2MSB bit order
* 'B' read/write information using MSB2LSB bit order
* 'H' read/write information using host bit order
* 'M' enable use of memory-mapped files when supported
* 'm' disable use of memory-mapped files
* 'C' enable strip chopping support when reading
* 'c' disable strip chopping support
* 'h' read TIFF header only, do not load the first IFD
* '4' ClassicTIFF for creating a file (default)
* '8' BigTIFF for creating a file
*
* The use of the 'l' and 'b' flags is strongly discouraged.
* These flags are provided solely because numerous vendors,
* typically on the PC, do not correctly support TIFF; they
* only support the Intel little-endian byte order. This
* support is not configured by default because it supports
* the violation of the TIFF spec that says that readers *MUST*
* support both byte orders. It is strongly recommended that
* you not use this feature except to deal with busted apps
* that write invalid TIFF. And even in those cases you should
* bang on the vendors to fix their software.
*
* The 'L', 'B', and 'H' flags are intended for applications
* that can optimize operations on data by using a particular
* bit order. By default the library returns data in MSB2LSB
* bit order for compatibiltiy with older versions of this
* library. Returning data in the bit order of the native cpu
* makes the most sense but also requires applications to check
* the value of the FillOrder tag; something they probably do
* not do right now.
*
* The 'M' and 'm' flags are provided because some virtual memory
* systems exhibit poor behaviour when large images are mapped.
* These options permit clients to control the use of memory-mapped
* files on a per-file basis.
*
* The 'C' and 'c' flags are provided because the library support
* for chopping up large strips into multiple smaller strips is not
* application-transparent and as such can cause problems. The 'c'
* option permits applications that only want to look at the tags,
* for example, to get the unadulterated TIFF tag information.
*/
for (cp = mode; *cp; cp++)
switch (*cp) {
case 'b':
#ifndef WORDS_BIGENDIAN
if (m&O_CREAT)
tif->tif_flags |= TIFF_SWAB;
#endif
break;
case 'l':
#ifdef WORDS_BIGENDIAN
if ((m&O_CREAT))
tif->tif_flags |= TIFF_SWAB;
#endif
break;
case 'B':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
FILLORDER_MSB2LSB;
break;
case 'L':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
FILLORDER_LSB2MSB;
break;
case 'H':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
HOST_FILLORDER;
break;
case 'M':
if (m == O_RDONLY)
tif->tif_flags |= TIFF_MAPPED;
break;
case 'm':
if (m == O_RDONLY)
tif->tif_flags &= ~TIFF_MAPPED;
break;
case 'C':
if (m == O_RDONLY)
tif->tif_flags |= TIFF_STRIPCHOP;
break;
case 'c':
if (m == O_RDONLY)
tif->tif_flags &= ~TIFF_STRIPCHOP;
break;
case 'h':
tif->tif_flags |= TIFF_HEADERONLY;
break;
case '8':
if (m&O_CREAT)
tif->tif_flags |= TIFF_BIGTIFF;
break;
}
/*
* Read in TIFF header.
*/
if ((m & O_TRUNC) ||
!ReadOK(tif, &tif->tif_header, sizeof (TIFFHeaderClassic))) {
if (tif->tif_mode == O_RDONLY) {
TIFFErrorExt(tif->tif_clientdata, name,
"Cannot read TIFF header");
goto bad;
}
/*
* Setup header and write.
*/
#ifdef WORDS_BIGENDIAN
tif->tif_header.common.tiff_magic = tif->tif_flags & TIFF_SWAB
? TIFF_LITTLEENDIAN : TIFF_BIGENDIAN;
#else
tif->tif_header.common.tiff_magic = tif->tif_flags & TIFF_SWAB
? TIFF_BIGENDIAN : TIFF_LITTLEENDIAN;
#endif
if (!(tif->tif_flags&TIFF_BIGTIFF))
{
tif->tif_header.common.tiff_version = TIFF_VERSION_CLASSIC;
tif->tif_header.classic.tiff_diroff = 0;
if (tif->tif_flags & TIFF_SWAB)
TIFFSwabShort(&tif->tif_header.common.tiff_version);
tif->tif_header_size = sizeof(TIFFHeaderClassic);
}
else
{
tif->tif_header.common.tiff_version = TIFF_VERSION_BIG;
tif->tif_header.big.tiff_offsetsize = 8;
tif->tif_header.big.tiff_unused = 0;
tif->tif_header.big.tiff_diroff = 0;
if (tif->tif_flags & TIFF_SWAB)
{
TIFFSwabShort(&tif->tif_header.common.tiff_version);
TIFFSwabShort(&tif->tif_header.big.tiff_offsetsize);
}
tif->tif_header_size = sizeof (TIFFHeaderBig);
}
/*
* The doc for "fopen" for some STD_C_LIBs says that if you
* open a file for modify ("+"), then you must fseek (or
* fflush?) between any freads and fwrites. This is not
* necessary on most systems, but has been shown to be needed
* on Solaris.
*/
TIFFSeekFile( tif, 0, SEEK_SET );
if (!WriteOK(tif, &tif->tif_header, (tmsize_t)(tif->tif_header_size))) {
TIFFErrorExt(tif->tif_clientdata, name,
"Error writing TIFF header");
goto bad;
}
/*
* Setup the byte order handling.
*/
if (tif->tif_header.common.tiff_magic == TIFF_BIGENDIAN) {
#ifndef WORDS_BIGENDIAN
tif->tif_flags |= TIFF_SWAB;
#endif
} else {
#ifdef WORDS_BIGENDIAN
tif->tif_flags |= TIFF_SWAB;
#endif
}
/*
* Setup default directory.
*/
if (!TIFFDefaultDirectory(tif))
goto bad;
tif->tif_diroff = 0;
tif->tif_dirlist = NULL;
tif->tif_dirlistsize = 0;
tif->tif_dirnumber = 0;
return (tif);
}
/*
* Setup the byte order handling.
*/
if (tif->tif_header.common.tiff_magic != TIFF_BIGENDIAN &&
tif->tif_header.common.tiff_magic != TIFF_LITTLEENDIAN
#if MDI_SUPPORT
&&
#if HOST_BIGENDIAN
tif->tif_header.common.tiff_magic != MDI_BIGENDIAN
#else
tif->tif_header.common.tiff_magic != MDI_LITTLEENDIAN
#endif
) {
TIFFErrorExt(tif->tif_clientdata, name,
"Not a TIFF or MDI file, bad magic number %d (0x%x)",
#else
) {
TIFFErrorExt(tif->tif_clientdata, name,
"Not a TIFF file, bad magic number %d (0x%x)",
#endif
tif->tif_header.common.tiff_magic,
tif->tif_header.common.tiff_magic);
goto bad;
}
if (tif->tif_header.common.tiff_magic == TIFF_BIGENDIAN) {
#ifndef WORDS_BIGENDIAN
tif->tif_flags |= TIFF_SWAB;
#endif
} else {
#ifdef WORDS_BIGENDIAN
tif->tif_flags |= TIFF_SWAB;
#endif
}
if (tif->tif_flags & TIFF_SWAB)
TIFFSwabShort(&tif->tif_header.common.tiff_version);
if ((tif->tif_header.common.tiff_version != TIFF_VERSION_CLASSIC)&&
(tif->tif_header.common.tiff_version != TIFF_VERSION_BIG)) {
TIFFErrorExt(tif->tif_clientdata, name,
"Not a TIFF file, bad version number %d (0x%x)",
tif->tif_header.common.tiff_version,
tif->tif_header.common.tiff_version);
goto bad;
}
if (tif->tif_header.common.tiff_version == TIFF_VERSION_CLASSIC)
{
if (tif->tif_flags & TIFF_SWAB)
TIFFSwabLong(&tif->tif_header.classic.tiff_diroff);
tif->tif_header_size = sizeof(TIFFHeaderClassic);
}
else
{
if (!ReadOK(tif, ((uint8*)(&tif->tif_header) + sizeof(TIFFHeaderClassic)), (sizeof(TIFFHeaderBig)-sizeof(TIFFHeaderClassic))))
{
TIFFErrorExt(tif->tif_clientdata, name,
"Cannot read TIFF header");
goto bad;
}
if (tif->tif_flags & TIFF_SWAB)
{
TIFFSwabShort(&tif->tif_header.big.tiff_offsetsize);
TIFFSwabLong8(&tif->tif_header.big.tiff_diroff);
}
if (tif->tif_header.big.tiff_offsetsize != 8)
{
TIFFErrorExt(tif->tif_clientdata, name,
"Not a TIFF file, bad BigTIFF offsetsize %d (0x%x)",
tif->tif_header.big.tiff_offsetsize,
tif->tif_header.big.tiff_offsetsize);
goto bad;
}
if (tif->tif_header.big.tiff_unused != 0)
{
TIFFErrorExt(tif->tif_clientdata, name,
"Not a TIFF file, bad BigTIFF unused %d (0x%x)",
tif->tif_header.big.tiff_unused,
tif->tif_header.big.tiff_unused);
goto bad;
}
tif->tif_header_size = sizeof(TIFFHeaderBig);
tif->tif_flags |= TIFF_BIGTIFF;
}
tif->tif_flags |= TIFF_MYBUFFER;
tif->tif_rawcp = tif->tif_rawdata = 0;
tif->tif_rawdatasize = 0;
tif->tif_rawdataoff = 0;
tif->tif_rawdataloaded = 0;
switch (mode[0]) {
case 'r':
if (!(tif->tif_flags&TIFF_BIGTIFF))
tif->tif_nextdiroff = tif->tif_header.classic.tiff_diroff;
else
tif->tif_nextdiroff = tif->tif_header.big.tiff_diroff;
/*
* Try to use a memory-mapped file if the client
* has not explicitly suppressed usage with the
* 'm' flag in the open mode (see above).
*/
if (tif->tif_flags & TIFF_MAPPED)
{
toff_t n;
if (TIFFMapFileContents(tif,(void**)(&tif->tif_base),&n))
{
tif->tif_size=(tmsize_t)n;
assert((toff_t)tif->tif_size==n);
}
else
tif->tif_flags &= ~TIFF_MAPPED;
}
/*
* Sometimes we do not want to read the first directory (for example,
* it may be broken) and want to proceed to other directories. I this
* case we use the TIFF_HEADERONLY flag to open file and return
* immediately after reading TIFF header.
*/
if (tif->tif_flags & TIFF_HEADERONLY)
return (tif);
/*
* Setup initial directory.
*/
if (TIFFReadDirectory(tif)) {
tif->tif_rawcc = (tmsize_t)-1;
tif->tif_flags |= TIFF_BUFFERSETUP;
return (tif);
}
break;
case 'a':
/*
* New directories are automatically append
* to the end of the directory chain when they
* are written out (see TIFFWriteDirectory).
*/
if (!TIFFDefaultDirectory(tif))
goto bad;
return (tif);
}
bad:
tif->tif_mode = O_RDONLY; /* XXX avoid flush */
TIFFCleanup(tif);
bad2:
return ((TIFF*)0);
}
TIFF*
TIFFClientOpen(
const char* name, const char* mode,
thandle_t clientdata,
TIFFReadWriteProc readproc,
TIFFReadWriteProc writeproc,
TIFFSeekProc seekproc,
TIFFCloseProc closeproc,
TIFFSizeProc sizeproc,
TIFFMapFileProc mapproc,
TIFFUnmapFileProc unmapproc
)
{
static const char module[] = "TIFFClientOpen";
TIFF *tif;
int m, bigendian;
const char* cp;
m = _TIFFgetMode(mode, module);
if (m == -1)
goto bad2;
tif = (TIFF *)_TIFFmalloc(sizeof (TIFF) + strlen(name) + 1);
if (tif == NULL) {
TIFFError(module, "%s: Out of memory (TIFF structure)", name);
goto bad2;
}
_TIFFmemset(tif, 0, sizeof (*tif));
tif->tif_name = (char *)tif + sizeof (TIFF);
strcpy(tif->tif_name, name);
tif->tif_mode = m &~ (O_CREAT|O_TRUNC);
tif->tif_curdir = (tdir_t) -1; /* non-existent directory */
tif->tif_curoff = 0;
tif->tif_curstrip = (tstrip_t) -1; /* invalid strip */
tif->tif_row = (uint32) -1; /* read/write pre-increment */
tif->tif_clientdata = clientdata;
tif->tif_readproc = readproc;
tif->tif_writeproc = writeproc;
tif->tif_seekproc = seekproc;
tif->tif_closeproc = closeproc;
tif->tif_sizeproc = sizeproc;
tif->tif_mapproc = mapproc;
tif->tif_unmapproc = unmapproc;
_TIFFSetDefaultCompressionState(tif); /* setup default state */
/*
* Default is to return data MSB2LSB and enable the
* use of memory-mapped files and strip chopping when
* a file is opened read-only.
*/
tif->tif_flags = FILLORDER_MSB2LSB;
if (m == O_RDONLY)
#ifdef STRIPCHOP_DEFAULT
tif->tif_flags |= TIFF_MAPPED|STRIPCHOP_DEFAULT;
#else
tif->tif_flags |= TIFF_MAPPED;
#endif
{ union { int32 i; char c[4]; } u; u.i = 1; bigendian = u.c[0] == 0; }
/*
* Process library-specific flags in the open mode string.
* The following flags may be used to control intrinsic library
* behaviour that may or may not be desirable (usually for
* compatibility with some application that claims to support
* TIFF but only supports some braindead idea of what the
* vendor thinks TIFF is):
*
* 'l' use little-endian byte order for creating a file
* 'b' use big-endian byte order for creating a file
* 'L' read/write information using LSB2MSB bit order
* 'B' read/write information using MSB2LSB bit order
* 'H' read/write information using host bit order
* 'M' enable use of memory-mapped files when supported
* 'm' disable use of memory-mapped files
* 'C' enable strip chopping support when reading
* 'c' disable strip chopping support
*
* The use of the 'l' and 'b' flags is strongly discouraged.
* These flags are provided solely because numerous vendors,
* typically on the PC, do not correctly support TIFF; they
* only support the Intel little-endian byte order. This
* support is not configured by default because it supports
* the violation of the TIFF spec that says that readers *MUST*
* support both byte orders. It is strongly recommended that
* you not use this feature except to deal with busted apps
* that write invalid TIFF. And even in those cases you should
* bang on the vendors to fix their software.
*
* The 'L', 'B', and 'H' flags are intended for applications
* that can optimize operations on data by using a particular
* bit order. By default the library returns data in MSB2LSB
* bit order for compatibiltiy with older versions of this
* library. Returning data in the bit order of the native cpu
* makes the most sense but also requires applications to check
* the value of the FillOrder tag; something they probabyl do
* not do right now.
*
* The 'M' and 'm' flags are provided because some virtual memory
* systems exhibit poor behaviour when large images are mapped.
* These options permit clients to control the use of memory-mapped
* files on a per-file basis.
*
* The 'C' and 'c' flags are provided because the library support
* for chopping up large strips into multiple smaller strips is not
* application-transparent and as such can cause problems. The 'c'
* option permits applications that only want to look at the tags,
* for example, to get the unadulterated TIFF tag information.
*/
for (cp = mode; *cp; cp++)
switch (*cp) {
case 'b':
if ((m&O_CREAT) && !bigendian)
tif->tif_flags |= TIFF_SWAB;
break;
case 'l':
if ((m&O_CREAT) && bigendian)
tif->tif_flags |= TIFF_SWAB;
break;
case 'B':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
FILLORDER_MSB2LSB;
break;
case 'L':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
FILLORDER_LSB2MSB;
break;
case 'H':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
HOST_FILLORDER;
break;
case 'M':
if (m == O_RDONLY)
tif->tif_flags |= TIFF_MAPPED;
break;
case 'm':
if (m == O_RDONLY)
tif->tif_flags &= ~TIFF_MAPPED;
break;
case 'C':
if (m == O_RDONLY)
tif->tif_flags |= TIFF_STRIPCHOP;
break;
case 'c':
if (m == O_RDONLY)
tif->tif_flags &= ~TIFF_STRIPCHOP;
break;
}
/*
* Read in TIFF header.
*/
if (!ReadOK(tif, &tif->tif_header, sizeof (TIFFHeader))) {
if (tif->tif_mode == O_RDONLY) {
TIFFError(name, "Cannot read TIFF header");
goto bad;
}
/*
* Setup header and write.
*/
tif->tif_header.tiff_magic = tif->tif_flags & TIFF_SWAB
? (bigendian ? TIFF_LITTLEENDIAN : TIFF_BIGENDIAN)
: (bigendian ? TIFF_BIGENDIAN : TIFF_LITTLEENDIAN);
tif->tif_header.tiff_version = TIFF_VERSION;
if (tif->tif_flags & TIFF_SWAB)
TIFFSwabShort(&tif->tif_header.tiff_version);
tif->tif_header.tiff_diroff = 0; /* filled in later */
if (!WriteOK(tif, &tif->tif_header, sizeof (TIFFHeader))) {
TIFFError(name, "Error writing TIFF header");
goto bad;
}
/*
* Setup the byte order handling.
*/
TIFFInitOrder(tif, tif->tif_header.tiff_magic, bigendian);
/*
* Setup default directory.
*/
if (!TIFFDefaultDirectory(tif))
goto bad;
tif->tif_diroff = 0;
return (tif);
}
/*
* Setup the byte order handling.
*/
if (tif->tif_header.tiff_magic != TIFF_BIGENDIAN &&
tif->tif_header.tiff_magic != TIFF_LITTLEENDIAN) {
TIFFError(name, "Not a TIFF file, bad magic number %d (0x%x)",
tif->tif_header.tiff_magic,
tif->tif_header.tiff_magic);
goto bad;
}
TIFFInitOrder(tif, tif->tif_header.tiff_magic, bigendian);
/*
* Swap header if required.
*/
if (tif->tif_flags & TIFF_SWAB) {
TIFFSwabShort(&tif->tif_header.tiff_version);
TIFFSwabLong(&tif->tif_header.tiff_diroff);
}
/*
* Now check version (if needed, it's been byte-swapped).
* Note that this isn't actually a version number, it's a
* magic number that doesn't change (stupid).
*/
if (tif->tif_header.tiff_version != TIFF_VERSION) {
TIFFError(name,
"Not a TIFF file, bad version number %d (0x%x)",
tif->tif_header.tiff_version,
tif->tif_header.tiff_version);
goto bad;
}
tif->tif_flags |= TIFF_MYBUFFER;
tif->tif_rawcp = tif->tif_rawdata = 0;
tif->tif_rawdatasize = 0;
/*
* Setup initial directory.
*/
switch (mode[0]) {
case 'r':
tif->tif_nextdiroff = tif->tif_header.tiff_diroff;
/*
* Try to use a memory-mapped file if the client
* has not explicitly suppressed usage with the
* 'm' flag in the open mode (see above).
*/
if ((tif->tif_flags & TIFF_MAPPED) &&
!TIFFMapFileContents(tif, (tdata_t*) &tif->tif_base, &tif->tif_size))
tif->tif_flags &= ~TIFF_MAPPED;
if (TIFFReadDirectory(tif)) {
tif->tif_rawcc = -1;
tif->tif_flags |= TIFF_BUFFERSETUP;
return (tif);
}
break;
case 'a':
/*
* New directories are automatically append
* to the end of the directory chain when they
* are written out (see TIFFWriteDirectory).
*/
if (!TIFFDefaultDirectory(tif))
goto bad;
return (tif);
}
bad:
tif->tif_mode = O_RDONLY; /* XXX avoid flush */
TIFFClose(tif);
return ((TIFF*)0);
bad2:
(void) (*closeproc)(clientdata);
return ((TIFF*)0);
}
TIFF*
TIFFClientOpen(
const char* name, const char* mode,
void* clientdata,
TIFFReadWriteProc readproc,
TIFFReadWriteProc writeproc,
TIFFSeekProc seekproc,
TIFFCloseProc closeproc,
TIFFSizeProc sizeproc,
TIFFMapFileProc mapproc,
TIFFUnmapFileProc unmapproc,
void* pdflib_opaque,
TIFFmallocHandler malloc_h,
TIFFreallocHandler realloc_h,
TIFFfreeHandler free_h,
TIFFErrorHandler error_h,
TIFFErrorHandler warn_h
)
{
static const char module[] = "TIFFClientOpen";
TIFF pdftiff;
TIFF *tif = &pdftiff;
int m;
int bigendian;
const char* cp;
(void) mapproc;
(void) unmapproc;
{ union { int32 i; char c[4]; } u; u.i = 1; bigendian = u.c[0] == 0; }
m = _TIFFgetMode(mode, module);
if (m == -1)
goto bad2;
/* PDFlib: preset tiff structure so that the first malloc works */
tif->pdflib_opaque = pdflib_opaque;
tif->pdflib_malloc = malloc_h;
tif->pdflib_realloc = realloc_h;
tif->pdflib_free = free_h;
tif->pdflib_error = error_h;
tif->pdflib_warn = warn_h;
tif = (TIFF *)_TIFFmalloc(sizeof (TIFF) + (tsize_t) strlen(name) + 1);
if (tif == NULL) {
_TIFFError(tif, module,
"%s: Out of memory (TIFF structure)", name);
goto bad2;
}
_TIFFmemset(tif, 0, sizeof (*tif));
/* PDFlib: add own mallochandling */
tif->pdflib_opaque = pdflib_opaque;
tif->pdflib_malloc = malloc_h;
tif->pdflib_realloc = realloc_h;
tif->pdflib_free = free_h;
tif->pdflib_error = error_h;
tif->pdflib_warn = warn_h;
tif->tif_name = (char *)tif + sizeof (TIFF);
strcpy(tif->tif_name, name);
tif->tif_mode = m &~ (O_CREAT|O_TRUNC);
tif->tif_curdir = (tdir_t) -1; /* non-existent directory */
tif->tif_curoff = 0;
tif->tif_curstrip = (tstrip_t) -1; /* invalid strip */
tif->tif_row = (uint32) -1; /* read/write pre-increment */
tif->tif_clientdata = clientdata;
#ifdef PDFlib_NOT_USED
if (!readproc || !writeproc || !seekproc || !closeproc || !sizeproc) {
_TIFFError(tif, module,
"One of the client procedures is NULL pointer.");
goto bad2;
}
#endif /* PDFLIB_TIFFWRITE_SUPPORT */
tif->tif_readproc = readproc;
tif->tif_writeproc = writeproc;
tif->tif_seekproc = seekproc;
tif->tif_closeproc = closeproc;
tif->tif_sizeproc = sizeproc;
#ifdef HAVE_MMAP
if (mapproc)
tif->tif_mapproc = mapproc;
else
tif->tif_mapproc = _tiffDummyMapProc;
if (unmapproc)
tif->tif_unmapproc = unmapproc;
else
tif->tif_unmapproc = _tiffDummyUnmapProc;
#endif
_TIFFSetDefaultCompressionState(tif); /* setup default state */
/*
* Default is to return data MSB2LSB and enable the
* use of memory-mapped files and strip chopping when
* a file is opened read-only.
*/
tif->tif_flags = FILLORDER_MSB2LSB;
#ifdef HAVE_MMAP
if (m == O_RDONLY )
tif->tif_flags |= TIFF_MAPPED;
#endif
#ifdef STRIPCHOP_DEFAULT
if (m == O_RDONLY || m == O_RDWR)
tif->tif_flags |= STRIPCHOP_DEFAULT;
#endif
/*
* Process library-specific flags in the open mode string.
* The following flags may be used to control intrinsic library
* behaviour that may or may not be desirable (usually for
* compatibility with some application that claims to support
* TIFF but only supports some braindead idea of what the
* vendor thinks TIFF is):
*
* 'l' use little-endian byte order for creating a file
* 'b' use big-endian byte order for creating a file
* 'L' read/write information using LSB2MSB bit order
* 'B' read/write information using MSB2LSB bit order
* 'H' read/write information using host bit order
* 'M' enable use of memory-mapped files when supported
* 'm' disable use of memory-mapped files
* 'C' enable strip chopping support when reading
* 'c' disable strip chopping support
* 'h' read TIFF header only, do not load the first IFD
*
* The use of the 'l' and 'b' flags is strongly discouraged.
* These flags are provided solely because numerous vendors,
* typically on the PC, do not correctly support TIFF; they
* only support the Intel little-endian byte order. This
* support is not configured by default because it supports
* the violation of the TIFF spec that says that readers *MUST*
* support both byte orders. It is strongly recommended that
* you not use this feature except to deal with busted apps
* that write invalid TIFF. And even in those cases you should
* bang on the vendors to fix their software.
*
* The 'L', 'B', and 'H' flags are intended for applications
* that can optimize operations on data by using a particular
* bit order. By default the library returns data in MSB2LSB
* bit order for compatibiltiy with older versions of this
* library. Returning data in the bit order of the native cpu
* makes the most sense but also requires applications to check
* the value of the FillOrder tag; something they probably do
* not do right now.
*
* The 'M' and 'm' flags are provided because some virtual memory
* systems exhibit poor behaviour when large images are mapped.
* These options permit clients to control the use of memory-mapped
* files on a per-file basis.
*
* The 'C' and 'c' flags are provided because the library support
* for chopping up large strips into multiple smaller strips is not
* application-transparent and as such can cause problems. The 'c'
* option permits applications that only want to look at the tags,
* for example, to get the unadulterated TIFF tag information.
*/
for (cp = mode; *cp; cp++)
switch (*cp) {
case 'b':
if ((m&O_CREAT) && !bigendian)
tif->tif_flags |= TIFF_SWAB;
break;
case 'l':
if ((m&O_CREAT) && bigendian)
tif->tif_flags |= TIFF_SWAB;
break;
case 'B':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
FILLORDER_MSB2LSB;
break;
case 'L':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
FILLORDER_LSB2MSB;
break;
#ifdef PDFlib_NOT_USED /* PDFlib GmbH */
case 'H':
tif->tif_flags = (tif->tif_flags &~ TIFF_FILLORDER) |
HOST_FILLORDER;
break;
#endif
#ifdef HAVE_MMAP
case 'M':
if (m == O_RDONLY)
tif->tif_flags |= TIFF_MAPPED;
break;
case 'm':
if (m == O_RDONLY)
tif->tif_flags &= ~TIFF_MAPPED;
break;
#endif
case 'C':
if (m == O_RDONLY)
tif->tif_flags |= TIFF_STRIPCHOP;
break;
case 'c':
if (m == O_RDONLY)
tif->tif_flags &= ~TIFF_STRIPCHOP;
break;
case 'h':
tif->tif_flags |= TIFF_HEADERONLY;
break;
}
/*
* Read in TIFF header.
*/
if (tif->tif_mode & O_TRUNC ||
!ReadOK(tif, &tif->tif_header, sizeof (TIFFHeader))) {
if (tif->tif_mode == O_RDONLY) {
_TIFFError(tif, name, "Cannot read TIFF header");
goto bad;
}
/*
* Setup header and write.
*/
tif->tif_header.tiff_magic = tif->tif_flags & TIFF_SWAB
? (bigendian ? TIFF_LITTLEENDIAN : TIFF_BIGENDIAN)
: (bigendian ? TIFF_BIGENDIAN : TIFF_LITTLEENDIAN);
tif->tif_header.tiff_version = TIFF_VERSION;
if (tif->tif_flags & TIFF_SWAB)
TIFFSwabShort(&tif->tif_header.tiff_version);
tif->tif_header.tiff_diroff = 0; /* filled in later */
/*
* The doc for "fopen" for some STD_C_LIBs says that if you
* open a file for modify ("+"), then you must fseek (or
* fflush?) between any freads and fwrites. This is not
* necessary on most systems, but has been shown to be needed
* on Solaris.
*/
TIFFSeekFile( tif, 0, SEEK_SET );
if (!WriteOK(tif, &tif->tif_header, sizeof (TIFFHeader))) {
_TIFFError(tif, name, "Error writing TIFF header");
goto bad;
}
/*
* Setup the byte order handling.
*/
TIFFInitOrder(tif, tif->tif_header.tiff_magic, bigendian);
/*
* Setup default directory.
*/
if (!TIFFDefaultDirectory(tif))
goto bad;
tif->tif_diroff = 0;
tif->tif_dirlist = NULL;
tif->tif_dirnumber = 0;
return (tif);
}
/*
* Setup the byte order handling.
*/
if (tif->tif_header.tiff_magic != TIFF_BIGENDIAN &&
tif->tif_header.tiff_magic != TIFF_LITTLEENDIAN) {
_TIFFError(tif, name,
"Not a TIFF file, bad magic number %d (0x%x)",
tif->tif_header.tiff_magic,
tif->tif_header.tiff_magic);
goto bad;
}
TIFFInitOrder(tif, tif->tif_header.tiff_magic, bigendian);
/*
* Swap header if required.
*/
if (tif->tif_flags & TIFF_SWAB) {
TIFFSwabShort(&tif->tif_header.tiff_version);
TIFFSwabLong(&tif->tif_header.tiff_diroff);
}
/*
* Now check version (if needed, it's been byte-swapped).
* Note that this isn't actually a version number, it's a
* magic number that doesn't change (stupid).
*/
if (tif->tif_header.tiff_version == TIFF_BIGTIFF_VERSION) {
_TIFFError(tif, name,
"This is a BigTIFF file. This format not supported\n"
"by this version of libtiff." );
goto bad;
}
if (tif->tif_header.tiff_version != TIFF_VERSION) {
_TIFFError(tif, name,
"Not a TIFF file, bad version number %d (0x%x)",
tif->tif_header.tiff_version,
tif->tif_header.tiff_version);
goto bad;
}
tif->tif_flags |= TIFF_MYBUFFER;
tif->tif_rawcp = tif->tif_rawdata = 0;
tif->tif_rawdatasize = 0;
/*
* Sometimes we do not want to read the first directory (for example,
* it may be broken) and want to proceed to other directories. I this
* case we use the TIFF_HEADERONLY flag to open file and return
* immediately after reading TIFF header.
*/
if (tif->tif_flags & TIFF_HEADERONLY)
return (tif);
/*
* Setup initial directory.
*/
switch (mode[0]) {
case 'r':
tif->tif_nextdiroff = tif->tif_header.tiff_diroff;
#ifdef HAVE_MMAP
/*
* Try to use a memory-mapped file if the client
* has not explicitly suppressed usage with the
* 'm' flag in the open mode (see above).
*/
if ((tif->tif_flags & TIFF_MAPPED) &&
!TIFFMapFileContents(tif, (tdata_t*) &tif->tif_base, &tif->tif_size))
tif->tif_flags &= ~TIFF_MAPPED;
#endif
if (TIFFReadDirectory(tif)) {
tif->tif_rawcc = -1;
tif->tif_flags |= TIFF_BUFFERSETUP;
return (tif);
}
break;
case 'a':
/*
* New directories are automatically append
* to the end of the directory chain when they
* are written out (see TIFFWriteDirectory).
*/
if (!TIFFDefaultDirectory(tif))
goto bad;
return (tif);
}
bad:
tif->tif_mode = O_RDONLY; /* XXX avoid flush */
TIFFCleanup(tif);
bad2:
return ((TIFF*)0);
}
TIFF*
TIFFClientOpen(
const char* name, const char* mode,
thandle_t clientdata,
TIFFReadWriteProc readproc,
TIFFReadWriteProc writeproc,
TIFFSeekProc seekproc,
TIFFCloseProc closeproc,
TIFFSizeProc sizeproc,
TIFFMapFileProc mapproc,
TIFFUnmapFileProc unmapproc
)
{
static const char module[] = "TIFFClientOpen";
TIFF *tif;
int m, bigendian;
m = _TIFFgetMode(mode, module);
if (m == -1)
goto bad2;
tif = (TIFF *)_TIFFmalloc(sizeof (TIFF) + strlen(name) + 1);
if (tif == NULL) {
TIFFError(module, "%s: Out of memory (TIFF structure)", name);
goto bad2;
}
_TIFFmemset(tif, 0, sizeof (*tif));
tif->tif_name = (char *)tif + sizeof (TIFF);
strcpy(tif->tif_name, name);
tif->tif_mode = m &~ (O_CREAT|O_TRUNC);
tif->tif_curdir = (tdir_t) -1; /* non-existent directory */
tif->tif_curoff = 0;
tif->tif_curstrip = (tstrip_t) -1; /* invalid strip */
tif->tif_row = (uint32)-1; /* read/write pre-increment */
tif->tif_clientdata = clientdata;
tif->tif_readproc = readproc;
tif->tif_writeproc = writeproc;
tif->tif_seekproc = seekproc;
tif->tif_closeproc = closeproc;
tif->tif_sizeproc = sizeproc;
tif->tif_mapproc = mapproc;
tif->tif_unmapproc = unmapproc;
{ union { int32 i; char c[4]; } u; u.i = 1; bigendian = u.c[0] == 0; }
#ifdef ENDIANHACK_SUPPORT
/*
* Numerous vendors, typically on the PC, do not correctly
* support TIFF; they only support the Intel little-endian
* byte order. If this hack is enabled, then applications
* can open a file with a specific byte-order by specifying
* either "wl" (for litt-endian byte order) or "wb" for
* (big-endian byte order). This support is not configured
* by default because it supports the violation of the TIFF
* spec that says that readers *MUST* support both byte orders.
*
* It is strongly recommended that you not use this feature
* except to deal with busted apps that write invalid TIFF.
* And even in those cases you should bang on the vendors to
* fix their software.
*/
if ((m&O_CREAT) &&
((bigendian && mode[1] == 'l') || (!bigendian && mode[1] == 'b')))
tif->tif_flags |= TIFF_SWAB;
#endif
/*
* Read in TIFF header.
*/
if (!ReadOK(tif, &tif->tif_header, sizeof (TIFFHeader))) {
if (tif->tif_mode == O_RDONLY) {
TIFFError(name, "Cannot read TIFF header");
goto bad;
}
/*
* Setup header and write.
*/
tif->tif_header.tiff_magic = tif->tif_flags & TIFF_SWAB
? (bigendian ? TIFF_LITTLEENDIAN : TIFF_BIGENDIAN)
: (bigendian ? TIFF_BIGENDIAN : TIFF_LITTLEENDIAN);
tif->tif_header.tiff_version = TIFF_VERSION;
tif->tif_header.tiff_diroff = 0; /* filled in later */
if (!WriteOK(tif, &tif->tif_header, sizeof (TIFFHeader))) {
TIFFError(name, "Error writing TIFF header");
goto bad;
}
/*
* Setup the byte order handling.
*/
TIFFInitOrder(tif, tif->tif_header.tiff_magic, bigendian);
/*
* Setup default directory.
*/
if (!TIFFDefaultDirectory(tif))
goto bad;
tif->tif_diroff = 0;
return (tif);
}
/*
* Setup the byte order handling.
*/
if (tif->tif_header.tiff_magic != TIFF_BIGENDIAN &&
tif->tif_header.tiff_magic != TIFF_LITTLEENDIAN) {
TIFFError(name, "Not a TIFF file, bad magic number %d (0x%x)",
tif->tif_header.tiff_magic,
tif->tif_header.tiff_magic);
goto bad;
}
TIFFInitOrder(tif, tif->tif_header.tiff_magic, bigendian);
/*
* Swap header if required.
*/
if (tif->tif_flags & TIFF_SWAB) {
TIFFSwabShort(&tif->tif_header.tiff_version);
TIFFSwabLong(&tif->tif_header.tiff_diroff);
}
/*
* Now check version (if needed, it's been byte-swapped).
* Note that this isn't actually a version number, it's a
* magic number that doesn't change (stupid).
*/
if (tif->tif_header.tiff_version != TIFF_VERSION) {
TIFFError(name,
"Not a TIFF file, bad version number %d (0x%x)",
tif->tif_header.tiff_version,
tif->tif_header.tiff_version);
goto bad;
}
tif->tif_flags |= TIFF_MYBUFFER;
tif->tif_rawcp = tif->tif_rawdata = 0;
tif->tif_rawdatasize = 0;
/*
* Setup initial directory.
*/
switch (mode[0]) {
case 'r':
tif->tif_nextdiroff = tif->tif_header.tiff_diroff;
if (TIFFMapFileContents(tif, (tdata_t*) &tif->tif_base, &tif->tif_size))
tif->tif_flags |= TIFF_MAPPED;
if (TIFFReadDirectory(tif)) {
tif->tif_rawcc = -1;
tif->tif_flags |= TIFF_BUFFERSETUP;
return (tif);
}
break;
case 'a':
/*
* New directories are automatically append
* to the end of the directory chain when they
* are written out (see TIFFWriteDirectory).
*/
if (!TIFFDefaultDirectory(tif))
goto bad;
return (tif);
}
bad:
tif->tif_mode = O_RDONLY; /* XXX avoid flush */
TIFFClose(tif);
return ((TIFF*)0);
bad2:
(void) (*closeproc)(clientdata);
return ((TIFF*)0);
}
