Ejemplos de TclCreateSemaphore en C++ (Cpp)

Ejemplo n.º 1

Archivo: semaphore_example3_isr.c Proyecto: Arcko/trochili

/* 用户应用程序入口函数 */
static void AppSetupEntry(void)
{
    TState state;
    TError error;

    /* 设置和KEY相关的外部中断向量 */
    state = TclSetIrqVector(KEY_IRQ_ID, &EvbKeyISR, (TThread*)0, (TArgument)0, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_IRQ_NONE), "");

    /* 初始化信号量 */
    state = TclCreateSemaphore(&LedSemaphore, 0, 1, TCLP_IPC_DUMMY, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_IPC_NONE), "");

    /* 初始化Led线程 */
    state = TclCreateThread(&ThreadLed,
                          &ThreadLedEntry, (TArgument)0,
                          ThreadLedStack, THREAD_LED_STACK_BYTES,
                          THREAD_LED_PRIORITY, THREAD_LED_SLICE, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活Led线程 */
    state = TclActivateThread(&ThreadLed, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");
}

Ejemplo n.º 2

Archivo: semaphore_example2.c Proyecto: Arcko/trochili

/* 用户应用入口函数 */
static void AppSetupEntry(void)
{
    TState state;
    TError error;

    /* 初始化信号量1 */
    state = TclCreateSemaphore(&LedSemaphore1, 0, 1, TCLP_IPC_DUMMY, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_IPC_NONE), "");

    /* 初始化信号量2 */
    state = TclCreateSemaphore(&LedSemaphore2, 0, 1, TCLP_IPC_DUMMY, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_IPC_NONE), "");

    /* 初始化Led线程1 */
    state = TclCreateThread(&ThreadLed1,
                          &ThreadLed1Entry, (TArgument)0,
                          ThreadLed1Stack, THREAD_LED_STACK_BYTES,
                          THREAD_LED_PRIORITY, THREAD_LED_SLICE,
                          &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 初始化Led线程2 */
    state = TclCreateThread(&ThreadLed2,
                          &ThreadLed2Entry, (TArgument)0,
                          ThreadLed2Stack, THREAD_LED_STACK_BYTES,
                          THREAD_LED_PRIORITY + 1, THREAD_LED_SLICE,
                          &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活Led线程1 */
    state = TclActivateThread(&ThreadLed1, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活Led线程2 */
    state = TclActivateThread(&ThreadLed2, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");
}

Ejemplo n.º 3

Archivo: mailbox_example3.c Proyecto: Arcko/trochili

/* 用户应用程序入口函数 */
static void AppSetupEntry(void)
{
    TState state;
    TError error;

    /* 初始化信号量和邮箱 */
    state = TclCreateMailBox(&LedMailbox, TCLP_IPC_DUMMY, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_IPC_NONE), "");

    state = TclCreateSemaphore(&LedSemaphore, 0, 1, TCLP_IPC_DUMMY, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_IPC_NONE), "");

    /* 初始化Led设备控制线程 */
    state = TclCreateThread(&ThreadLed,
                          &ThreadLedEntry,
                          (TArgument)0,
                          ThreadLedStack,
                          THREAD_LED_STACK_BYTES,
                          THREAD_LED_PRIORITY,
                          THREAD_LED_SLICE,
                          &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 初始化CTRL线程 */
    state = TclCreateThread(&ThreadCTRL,
                          &ThreadCtrlEntry,
                          (TArgument)0,
                          ThreadCTRLStack,
                          THREAD_CTRL_STACK_BYTES,
                          THREAD_CTRL_PRIORITY,
                          THREAD_CTRL_SLICE,
                          &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活Led线程 */
    state = TclActivateThread(&ThreadLed, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活CTRL线程 */
    state = TclActivateThread(&ThreadCTRL, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");
}

Ejemplo n.º 4

Archivo: semaphore_example4.c Proyecto: liuxuming/trochili

/* 用户应用程序入口函数 */
static void AppSetupEntry(void)
{
    TState state;
    TError error;

    /* 初始化信号量 */
    state = TclCreateSemaphore(&UartSemaphore, "uart semaphore", 1, 1, TCLP_IPC_DEFAULT, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_IPC_NONE), "");

    /* 初始化UART设备控制线程 */
    state = TclCreateThread(&ThreadUartLowCase, "thread lowcase",
                          &ThreadUartLowCaseEntry, (TArgument)0,
                          ThreadUartLowCaseStack, THREAD_UART_STACK_BYTES,
                          THREAD_UART_PRIORITY, THREAD_UART_SLICE, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 初始化UART设备控制线程 */
    state = TclCreateThread(&ThreadUartUpCase, "thread upcase",
                          &ThreadUartUpCaseEntry, (TArgument)0,
                          ThreadUartUpCaseStack, THREAD_UART_STACK_BYTES,
                          THREAD_UART_PRIORITY, THREAD_UART_SLICE, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活UART小写线程 */
    state = TclActivateThread(&ThreadUartLowCase, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活UART大写线程 */
    state = TclActivateThread(&ThreadUartUpCase, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");
}

Ejemplo n.º 5

Archivo: semaphore_example6_flush.c Proyecto: liuxuming/trochili

/* 用户应用程序入口函数 */
static void AppSetupEntry(void)
{
    TState state;
    TError error;

    /* 初始化信号量 */
    state = TclCreateSemaphore(&LedSemaphore, "semaphore", 0, 1, TCLP_IPC_DEFAULT, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_IPC_NONE), "");

    /* 初始化Led1线程 */
    state = TclCreateThread(&ThreadLed1, "thread led1",
                          &ThreadLed1Entry, (TArgument)0,
                          ThreadLed1Stack, THREAD_LED_STACK_BYTES,
                          THREAD_LED_PRIORITY, THREAD_LED_SLICE, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 初始化Led2线程 */
    state = TclCreateThread(&ThreadLed2, "thread led2",
                          &ThreadLed2Entry, (TArgument)0,
                          ThreadLed2Stack, THREAD_LED_STACK_BYTES,
                          THREAD_LED_PRIORITY, THREAD_LED_SLICE, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 初始化Led3线程 */
    state = TclCreateThread(&ThreadLed3, "thread led3",
                          &ThreadLed3Entry, (TArgument)0,
                          ThreadLed3Stack, THREAD_LED_STACK_BYTES,
                          THREAD_LED_PRIORITY, THREAD_LED_SLICE, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 初始化CTRL线程 */
    state = TclCreateThread(&ThreadCTRL, "thread led ctrl",
                          &ThreadCtrlEntry, (TArgument)0,
                          ThreadCTRLStack, THREAD_CTRL_STACK_BYTES,
                          THREAD_CTRL_PRIORITY, THREAD_CTRL_SLICE, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活Led线程1 */
    state = TclActivateThread(&ThreadLed1, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活Led线程2 */
    state = TclActivateThread(&ThreadLed2, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");


    /* 激活Led线程3 */
    state = TclActivateThread(&ThreadLed3, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");

    /* 激活CTRL线程 */
    state = TclActivateThread(&ThreadCTRL, &error);
    TCLM_ASSERT((state == eSuccess), "");
    TCLM_ASSERT((error == TCLE_THREAD_NONE), "");
}