bool _stdcall PtIsOnArc( const LLPoint & llArcCenter, double dArcRadius,
double dArcStartAzimuth, double dArcEndAzimuth, int nArcDirection,
const LLPoint & llTestPt, int & bOnArc )
{
InverseResult invResult;
if(!DistVincenty(llArcCenter, llTestPt, invResult))
return false;
double dDist = invResult.distance;
double dCrs = invResult.azimuth;
bOnArc = false;
if(fabs(dDist - dArcRadius) > 0.5e-3) //Tol())
bOnArc = false;
else {
double dArcExtent = GetArcExtent(dArcStartAzimuth, dArcEndAzimuth, nArcDirection, Tol());
if(dArcExtent == M_2PI)
bOnArc = true;
else
{
double dSubExtent = GetArcExtent(dArcStartAzimuth, dCrs, nArcDirection, Tol());
if(nArcDirection > 0) {
if(dSubExtent <= dArcExtent)
bOnArc = true;
} else {
if(dSubExtent >= dArcExtent)
bOnArc = true;
}
}
}
return true;
}
bool GiGraphics::setClipWorld(const Box2d& rectWorld)
{
bool ret = false;
if (isDrawing() && !rectWorld.isEmpty())
{
Box2d box (rectWorld * xf().worldToDisplay());
box.intersectWith(Box2d(m_impl->clipBox0));
if (!box.isEmpty(Tol(1, 0)))
{
if (box != Box2d(m_impl->clipBox))
{
box.get(m_impl->clipBox);
m_impl->rectDraw = box;
m_impl->rectDraw.inflate(GiGraphicsImpl::CLIP_INFLATE);
m_impl->rectDrawM = m_impl->rectDraw * xf().displayToModel();
m_impl->rectDrawW = m_impl->rectDrawM * xf().modelToWorld();
SafeCall(m_impl->canvas, _clipBoxChanged(m_impl->clipBox));
}
ret = true;
}
}
return ret;
}
float mgnear::linesHit(
int n, const Point2d* points, bool closed,
const Point2d& pt, float tol, Point2d& nearpt, int& segment,
bool* inside, int* hitType)
{
Point2d ptTemp;
float dist, distMin = _FLT_MAX;
const Box2d rect (pt, 2 * tol, 2 * tol);
int n2 = (closed && n > 1) ? n + 1 : n;
int type = mglnrel::ptInArea(pt, n, points, segment, Tol(tol), closed);
if (inside) {
*inside = (closed && type == mglnrel::kPtInArea);
}
if (hitType) {
*hitType = type;
}
if (type == mglnrel::kPtAtVertex) {
nearpt = points[segment];
distMin = nearpt.distanceTo(pt);
return distMin;
}
if (type == mglnrel::kPtOnEdge) {
distMin = mglnrel::ptToLine(points[segment], points[(segment+1)%n], pt, nearpt);
return distMin;
}
if (!closed || type != mglnrel::kPtInArea) {
return distMin;
}
for (int i = 0; i + 1 < n2; i++)
{
const Point2d& pt2 = points[(i + 1) % n];
if (closed || rect.isIntersect(Box2d(points[i], pt2)))
{
dist = mglnrel::ptToLine(points[i], pt2, pt, ptTemp);
if (distMin > 1e10f || (dist <= tol && dist < distMin))
{
distMin = dist;
nearpt = ptTemp;
if (dist <= tol)
segment = i;
}
}
}
return distMin;
}
bool destRhumb(double lat1, double lon1, double brng, double dist, double* lat2, double* lon2) {
lat1=toRad(lat1);
lon1=toRad(lon1);
double d=NMtorad(dist);
double tc=toRad(brng);
double lat= lat1+d*cos(tc);
if (std::abs(lat) > M_PI/2) return false;//"d too large. You can't go this far along this rhumb line!"
double q;
if (std::abs(lat-lat1) < sqrt(Tol())){
q=cos(lat1);
} else {
double dphi=log(tan(lat/2+M_PI/4)/tan(lat1/2+M_PI/4));
q= (lat-lat1)/dphi;
}
double dlon=-d*sin(tc)/q;
*lon2=toDeg(mod(lon1+dlon+M_PI,2*M_PI)-M_PI);
*lat2=toDeg(lat);
return true;
}
/**
* Calculates rhumb line distance between two points specified by latitude/longitude
* http://williams.best.vwh.net/avform.htm#Rhumb
* -> double lat1, lon1: first point in decimal degrees
* -> double lat2, lon2: second point in decimal degrees
* <- double dist: distance along bearing in nautical miles
* <- double bearing in decimal degrees
* As stated in the introduction, North latitudes and West longitudes are treated as positive,
* and South latitudes and East longitudes negative. It's easier to go with the flow, but if
* you prefer another convention you can change the signs in the formulae.
*/
void distRhumb(double lat1,double lon1, double lat2, double lon2, double *distance, double *brng){
lat1=toRad(lat1);
lat2=toRad(lat2);
lon1=toRad(lon1);
lon2=toRad(lon2);
double dlon_W=mod(lon2-lon1,(2*M_PI));
double dlon_E=mod(lon1-lon2,(2*M_PI));
double dphi=log(tan(lat2/2+M_PI/4)/tan(lat1/2+M_PI/4));
double q=0;
if (std::abs(lat2-lat1) < sqrt(Tol())){
q=cos(lat1);
} else {
q= (lat2-lat1)/dphi;
}
if (dlon_W < dlon_E){// Westerly rhumb line is the shortest
*brng=toDeg(mod(atan2(-dlon_W,dphi),(2*M_PI)));
*distance= radtoNM(sqrt(sqr(q)*(sqr(dlon_W)) + sqr(lat2-lat1)));
} else{
*brng=toDeg(mod(atan2(dlon_E,dphi),(2*M_PI)));
*distance= radtoNM(sqrt(sqr(q)*(sqr(dlon_E)) + sqr(lat2-lat1)));
}
}
Expr *Expr::FoldConstants(void) {
Expr *n = AllocExpr();
*n = *this;
int c = Children();
if(c >= 1) n->a = a->FoldConstants();
if(c >= 2) n->b = b->FoldConstants();
switch(op) {
case PARAM_PTR:
case PARAM:
case CONSTANT:
break;
case MINUS:
case TIMES:
case DIV:
case PLUS:
// If both ops are known, then we can evaluate immediately
if(n->a->op == CONSTANT && n->b->op == CONSTANT) {
double nv = n->Eval();
n->op = CONSTANT;
n->v = nv;
break;
}
// x + 0 = 0 + x = x
if(op == PLUS && n->b->op == CONSTANT && Tol(n->b->v, 0)) {
*n = *(n->a); break;
}
if(op == PLUS && n->a->op == CONSTANT && Tol(n->a->v, 0)) {
*n = *(n->b); break;
}
// 1*x = x*1 = x
if(op == TIMES && n->b->op == CONSTANT && Tol(n->b->v, 1)) {
*n = *(n->a); break;
}
if(op == TIMES && n->a->op == CONSTANT && Tol(n->a->v, 1)) {
*n = *(n->b); break;
}
// 0*x = x*0 = 0
if(op == TIMES && n->b->op == CONSTANT && Tol(n->b->v, 0)) {
n->op = CONSTANT; n->v = 0; break;
}
if(op == TIMES && n->a->op == CONSTANT && Tol(n->a->v, 0)) {
n->op = CONSTANT; n->v = 0; break;
}
break;
case SQRT:
case SQUARE:
case NEGATE:
case SIN:
case COS:
case ASIN:
case ACOS:
if(n->a->op == CONSTANT) {
double nv = n->Eval();
n->op = CONSTANT;
n->v = nv;
}
break;
default: oops();
}
return n;
}
