#if DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
SENSORS(&temperature_sensor);
uip_ipaddr_t hostaddr,netmask, draddr;
#include "net/uip-fw-drv.h"
#include "net/uip-over-mesh.h"
static struct uip_fw_netif meshif =
{UIP_FW_NETIF(172,16,0,0, 255,255,0,0, uip_over_mesh_send)};
#define UIP_OVER_MESH_CHANNEL 8
static uint8_t is_gateway;
#undef putchar
int __attribute__(( weak )) putchar(int c)
{
uart0_writeb(c);
return c;
}
void __io_putchar(char c)
{
putchar(c);
#endif /* UIP_ROUTER_MODULE */
extern const struct uip_router UIP_ROUTER_MODULE;
#endif /* UIP_CONF_ROUTER */
#ifndef WITH_UIP
#define WITH_UIP 0
#endif
#if WITH_UIP
#include "net/uip.h"
#include "net/uip-fw.h"
#include "net/uip-fw-drv.h"
#include "net/uip-over-mesh.h"
static struct uip_fw_netif slipif =
{UIP_FW_NETIF(192,168,1,2, 255,255,255,255, slip_send)};
static struct uip_fw_netif meshif =
{UIP_FW_NETIF(172,16,0,0, 255,255,0,0, uip_over_mesh_send)};
#endif /* WITH_UIP */
#define UIP_OVER_MESH_CHANNEL 8
#if WITH_UIP
static uint8_t is_gateway;
#endif /* WITH_UIP */
#ifdef EXPERIMENT_SETUP
#include "experiment-setup.h"
#endif
void init_platform(void);
static u8_t
sender(void)
{
return cooja_radio.send((char*)UIP_IP_BUF, uip_len);
}
/*---------------------------------------------------------------------------*/
static void
receiver(const struct radio_driver *d)
{
uip_len = d->read((char*)UIP_IP_BUF, UIP_BUFSIZE - UIP_LLH_LEN);
tcpip_input();
}
/*---------------------------------------------------------------------------*/
/* Only using a single network interface */
static struct uip_fw_netif wsn_if =
{UIP_FW_NETIF(172,16,0,0, 255,255,0,0, sender)};
static struct uip_fw_netif slip_if =
{UIP_FW_NETIF(0,0,0,0, 0,0,0,0, slip_send)};
/*---------------------------------------------------------------------------*/
void
init_net(void)
{
int i;
uip_ipaddr_t hostaddr, netmask;
rimeaddr_t rimeaddr;
/* Init Rime */
ctimer_init();
rimeaddr.u8[0] = node_id & 0xff;
rimeaddr.u8[1] = node_id >> 8;
rimeaddr_set_node_addr(&rimeaddr);
#if 0
int
force_float_inclusion()
{
extern int __fixsfsi;
extern int __floatsisf;
extern int __mulsf3;
extern int __subsf3;
return __fixsfsi + __floatsisf + __mulsf3 + __subsf3;
}
#endif
/* We have two IP interfaces. */
struct uip_fw_netif cc2420if =
{UIP_FW_NETIF(172,16,0,1, 255,255,0,0, cc2420_send_uaodv)};
static struct uip_fw_netif slipif =
{UIP_FW_NETIF(0,0,0,0, 255,255,255,255, slip_send)};
/* Radio stuff in network byte order. */
static u16_t panId = UIP_HTONS(0x2024);
#ifndef RF_CHANNEL
#define RF_CHANNEL 15
#endif
int
main(int argc, char **argv)
{
/*
#include "dev/ds2411.h"
#include "dev/leds.h"
#include "dev/light.h"
#include "dev/xmem.h"
#include "dev/button.h"
#include "codeprop/codeprop.h"
/* This is how we force inclusion of the psock library. */
#include "net/psock.h"
void *force_psock_inclusion = &psock_init;
void *force_udp_inclusion = &uip_udp_packet_send;
struct uip_fw_netif cc2420if =
{UIP_FW_NETIF(0,0,0,0, 255,255,255,255, cc2420_send_uaodv)};
PROCESS(button_process, "Button process");
PROCESS(dhclient_process, "Dhclient process");
/* Radio stuff in network byte order. */
static u16_t panId = HTONS(0x2024);
#ifndef RF_CHANNEL
#define RF_CHANNEL 15
#endif
int
main(int argc, char **argv)
{
/*
{
if ((xmit_buffer[0].flags & USB_BUFFER_SUBMITTED)) return UIP_FW_DROPPED;
uip_arp_out();
memcpy(xmit_data, uip_buf, uip_len);
xmit_buffer[0].next = NULL;
xmit_buffer[0].left = uip_len;
xmit_buffer[0].flags = USB_BUFFER_NOTIFY | USB_BUFFER_SHORT_END;
xmit_buffer[0].data = xmit_data;
/* printf("usbeth_send: %d\n", uip_len); */
usb_submit_xmit_buffer(DATA_IN, &xmit_buffer[0]);
return UIP_FW_OK;
}
static struct uip_fw_netif usbethif =
{UIP_FW_NETIF(172,16,0,1, 255,255,255,255, usbeth_send)};
#define BUF ((struct uip_eth_hdr *)&uip_buf[0])
PROCESS(usb_eth_process, "USB ethernet");
PROCESS_THREAD(usb_eth_process, ev , data)
{
PROCESS_BEGIN();
usb_register_request_handler(&cdc_eth_request_hook);
usb_setup();
usb_set_ep_event_process(DATA_OUT, process_current);
usb_set_global_event_process(process_current);
uip_fw_default(&usbethif);
uip_setethaddr(default_uip_ethaddr);
uip_arp_init();
/* devices */
#include "uip.h"
#include "dev/slip.h"
#include "dev/rs232.h"
/* network server programs */
#include "webserver-nogui.h"
#include "cmdd.h"
#include "telnetd.h"
#include "ctk/libconio_arch-small.h"
/*---------------------------------------------------------------------------*/
/* inteface */
static struct uip_fw_netif slipif =
{UIP_FW_NETIF(0, 0, 0, 0, 0, 0, 0, 0, slip_send)};
/* ip address of contiki */
const uip_ipaddr_t hostaddr = { { 10, 0, 1, 10 } };
/*---------------------------------------------------------------------------*/
int
main(void)
{
/* initialize process manager. */
process_init();
clrscr_arch();
uip_init();
uip_sethostaddr(&hostaddr);
uip_fw_default(&slipif);
#include "about-dsc.h"
#include "calc-dsc.h"
#include "dhcp-dsc.h"
#include "email-dsc.h"
#include "ftp-dsc.h"
#include "irc-dsc.h"
#include "netconf-dsc.h"
#include "process-list-dsc.h"
#include "shell-dsc.h"
#include "www-dsc.h"
#include "cmdd.h"
static struct uip_fw_netif tapif =
{UIP_FW_NETIF(0,0,0,0, 0,0,0,0, tapdev_output)};
PROCESS(init_process, "Init");
PROCESS_THREAD(init_process, ev, data)
{
uip_ipaddr_t addr;
PROCESS_BEGIN();
uip_ipaddr(&addr, 192,168,2,2);
uip_sethostaddr(&addr);
uip_ipaddr(&addr, 192,168,2,1);
uip_setdraddr(&addr);
#include "net/rime.h"
#include "sys/autostart.h"
/*#include "codeprop/codeprop.h"*/
SENSORS(&button_sensor, &light_sensor, &sht11_sensor);
extern int lpm_en;
#define WITH_UIP 0
#if WITH_UIP
static struct uip_fw_netif slipif =
{UIP_FW_NETIF(192,168,1,2, 255,255,255,255, slip_send)};
#endif /* WITH_UIP */
/*---------------------------------------------------------------------------*/
#if 0
int
force_float_inclusion()
{
extern int __fixsfsi;
extern int __floatsisf;
extern int __mulsf3;
extern int __subsf3;
return __fixsfsi + __floatsisf + __mulsf3 + __subsf3;
}
#endif
#include "dev/ds2411.h"
#include "dev/leds.h"
#include "dev/light.h"
#include "dev/xmem.h"
#include "dev/button.h"
#include "codeprop/codeprop.h"
/* This is how we force inclusion of the psock library. */
#include "net/psock.h"
void *force_psock_inclusion = &psock_init;
void *force_udp_inclusion = &uip_udp_packet_send;
struct uip_fw_netif cc2420if =
{UIP_FW_NETIF(172,16,0,9, 255,255,0,0, cc2420_send_uaodv)};
PROCESS(button_process, "Button process");
/* Radio stuff in network byte order. */
static u16_t panId = HTONS(0x2024);
#ifndef RF_CHANNEL
#define RF_CHANNEL 15
#endif
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
#include <debug-uart.h>
#include <net/uip-fw-drv.h>
#include <net/uip-over-mesh.h>
#include <dev/slip.h>
#include "contiki-main.h"
/* SLIP interface */
extern struct uip_fw_netif cc2420if;
rimeaddr_t node_addr = {{0,129}};
static struct uip_fw_netif slipif =
{UIP_FW_NETIF(0,0,0,0, 255,255,255,255, slip_send)};
/* USB buffers */
static unsigned char input_buffer[128];
static unsigned char output_buffer[128];
static unsigned char interrupt_buffer[16];
#define DEV_TO_HOST 0x81
#define HOST_TO_DEV 0x02
#define GATEWAY_TRICKLE_CHANNEL 8
void
slip_arch_init(unsigned long ubr)
{
}
