/* returns measured current for one channel */
float
sy527GetChannelMeasuredCurrent(unsigned int id, unsigned int board,
unsigned int chan)
{
int ret;
float u;
/* CHECK_OPEN(id);
sy527Start(id,"129.57.69.101");
sy527PrintMap(id);
sy527GetMap(id);
ret = sy527GetBoard(id, board); */
LOCK_MAINFRAME(id);
GET_FVALUE(IMon, u);
/*GET_FVALUE(V0Set, u);*/
UNLOCK_MAINFRAME(id);
#ifdef DEBUG
printf("%s:%s(%d): MF id=%u board=%u Chan=%u Val=%f Status=%d\n",
__FILE__, __FUNCTION__, __LINE__, id, board, chan, u, ret);
#endif
return(u);
}
/* sets on/off status for one channel */
int
sy1527SetChannelOnOff(unsigned int id, unsigned int board,
unsigned int chan, unsigned int u)
{
LOCK_MAINFRAME(id);
SET_LVALUE(Pw, u);
UNLOCK_MAINFRAME(id);
return(0);
}
/* sets maximum voltage for one channel */
int
sy1527SetChannelMaxVoltage(unsigned int id, unsigned int board,
unsigned int chan, float u)
{
LOCK_MAINFRAME(id);
SET_FVALUE(SVMax, u);
UNLOCK_MAINFRAME(id);
return(0);
}
/* sets demand voltage for one channel */
int
sy527SetChannelDemandVoltage(unsigned int id, unsigned int board,
unsigned int chan, float u)
{
LOCK_MAINFRAME(id);
SET_FVALUE(V0Set, u);
UNLOCK_MAINFRAME(id);
return(0);
}
/* sets enable/disable for one channel */
int
sy1527SetChannelEnableDisable(unsigned int id, unsigned int board,
unsigned int chan, unsigned int u)
{
LOCK_MAINFRAME(id);
SET_LVALUE1(PwEn, u);
UNLOCK_MAINFRAME(id);
return(0);
}
/* returns Ramp-up speed for one channel */
float
sy527GetChannelRampUp(unsigned int id, unsigned int board, unsigned int chan)
{
float u;
LOCK_MAINFRAME(id);
GET_FVALUE(RUp, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* sets Ramp-down speed for one channel */
int
sy1527SetChannelRampDown(unsigned int id, unsigned int board,
unsigned int chan, float u)
{
LOCK_MAINFRAME(id);
SET_FVALUE(RDWn, u);
UNLOCK_MAINFRAME(id);
return(0);
}
/* sets maximum current for one channel */
int
sy1527SetChannelMaxCurrent(unsigned int id, unsigned int board,
unsigned int chan, float u)
{
LOCK_MAINFRAME(id);
SET_FVALUE(I0Set, u);
UNLOCK_MAINFRAME(id);
return(0);
}
/* returns measured current for one channel */
float
sy1527GetChannelMeasuredCurrent(unsigned int id, unsigned int board,
unsigned int chan)
{
float u;
LOCK_MAINFRAME(id);
GET_FVALUE(IMon, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* returns measured voltage for one channel */
float
sy527GetChannelMeasuredVoltage(unsigned int id, unsigned int board,
unsigned int chan)
{
float u;
LOCK_MAINFRAME(id);
GET_FVALUE(VMon, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* returns maximum voltage for one channel */
float
sy1527GetChannelMaxVoltage(unsigned int id, unsigned int board,
unsigned int chan)
{
float u;
LOCK_MAINFRAME(id);
GET_FVALUE(SVMax, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* returns demand voltage for one channel */
float
sy1527GetChannelDemandVoltage(unsigned int id, unsigned int board,
unsigned int chan)
{
float u;
LOCK_MAINFRAME(id);
GET_FVALUE(V0Set, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* returns on/off status for one channel */
unsigned int
sy527GetChannelOnOff(unsigned int id, unsigned int board,
unsigned int chan)
{
unsigned int u;
LOCK_MAINFRAME(id);
GET_LVALUE(Pw, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* returns maximum current for one channel */
float
sy527GetChannelMaxCurrent(unsigned int id, unsigned int board,
unsigned int chan)
{
float u;
LOCK_MAINFRAME(id);
GET_FVALUE(I0Set, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* returns status for one channel */
unsigned int
sy1527GetChannelStatus(unsigned int id, unsigned int board,
unsigned int chan)
{
unsigned int u;
LOCK_MAINFRAME(id);
GET_LVALUE(Status, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* returns enable/disable for one channel */
unsigned int
sy1527GetChannelEnableDisable(unsigned int id, unsigned int board,
unsigned int chan)
{
unsigned int u;
LOCK_MAINFRAME(id);
GET_LVALUE(PwEn, u);
UNLOCK_MAINFRAME(id);
return(u);
}
/* returns Ramp-up speed for one channel */
float
sy1527GetChannelRampUp(unsigned int id, unsigned int board, unsigned int chan)
{
float u;
//printf("===========================================id=%d board=%d chan=%d\n",id,board,chan);
LOCK_MAINFRAME(id);
GET_FVALUE(RUp, u);
UNLOCK_MAINFRAME(id);
//printf("===========================================id=%d board=%d chan=%d value=%f\n",id,board,chan,u);
return(u);
}
float
sy1527GetChannelTripTime(unsigned int id, unsigned int board,
unsigned int chan)
{
float u;
LOCK_MAINFRAME(id);
//GET_FVALUE(Trip, u);
u=Measure[id].board[board].channel[chan].fval[Trip];
//printf("trip time %f %d %f\n", u, //Measure[id].board[board].channel[chan].lval[Trip],Measure[id].board[board].channel[chan].fval[Trip]);
UNLOCK_MAINFRAME(id);
//printf("trip time %f\n", u);
return u;
}
/// my: smi ======================================================================================
int sy1527BoardSmiMonitor(
char *epics_name, unsigned int id, unsigned int board,
unsigned int first_channel, unsigned int chs_number)
{
char *tmp1, *tmp2=epics_name; /// temporal
while((tmp1=strstr(tmp2,"_P"))){
tmp2=tmp1+1; /// my_n_smi: not used
}
int board_part=first_channel; /// my_n_smi: atoi(tmp2-1+strlen("_P"));
int b_status=0, b_status_res=0; /// my: smi
int i, i10;
///-------- my_n:
// id comes from db here.
// if not connection: id is absent in mainframes[] (in mainframes[] it is present as -1)
// if comment in startup.all: id is absent in mainframes[]
int absent_error=1;
for(i=0;i<nmainframes;i++){
if(mainframes[i]==id){absent_error=0;i10=i;break;}
}
if(absent_error==0 && mainframes_disconnect[i10]==1)absent_error=3;
else if(absent_error==0 && Demand[id].board[board].nchannels==0)absent_error=2;
///--------
LOCK_MAINFRAME(id);
for(i=first_channel; i<first_channel+chs_number; i++) /// my_n_smi
{
/// my: smi: accumulates all channels attuses into board status
b_status = b_status | Measure[id].board[board].channel[i].lval[Status];
if(!(Measure[id].board[board].channel[i].lval[Status] & 0x1))b_status = b_status | BIT_OFF; /// at least one channel in the board is OFF
/*printf("Slot: %2d Ch: %3d %s: %x\n", Slot, ChList[i],
ParName, lParValList[i]);*/
}
/// my:smi
char smi_obj_name1[150]; /// temporal
char smi_command[150]; /// temporal
if(b_status & BIT_ON)b_status_res=BIT_ON;
if(b_status & (BIT_RAMPUP | BIT_RAMPDOWN ))b_status_res=BIT_RAMPUP;
if(b_status & BIT_OFF)b_status_res=BIT_OFF;
if(b_status & (BIT_INTTRIP | BIT_EXTTRIP | BIT_OVERCUR | BIT_OVERVOLT | BIT_UNDERVOLT )) b_status_res=BIT_INTTRIP;
if(b_status_res==BIT_ON)strcpy(smi_command,"SET_ON");
else if(b_status_res==BIT_RAMPUP)strcpy(smi_command,"SET_RAMP"); /// temporal !!!
else if(b_status_res==BIT_OFF)strcpy(smi_command,"SET_OFF");
else if(b_status_res==BIT_INTTRIP)strcpy(smi_command,"SET_ERROR");
if(absent_error){
if(absent_error==1)b_status_res=BIT_CRATE_OFF;
else if(absent_error==2)b_status_res=BIT_BOARD_NOT_PRESENT;
else if(absent_error==3)b_status_res=BIT_CRATE_OFF_ON_WAY;
strcpy(smi_command,"SET_ERROR"); // my_n:
//printf(">>> %s %d\n", epics_name, absent_error );
}
if(b_status_res != boards_status[id][board][board_part]){
// sprintf(smi_obj_name1, CRATE_LABEL, id);
// sprintf(smi_obj_name, "HV_TEST::%s_%d", smi_obj_name1, board);
// strncpy(smi_obj_name1, smi_obj_name, strlen(smi_obj_name) - strlen("_monitor"));
// smi_obj_name1[strlen(smi_obj_name) - strlen("_monitor")]=0;
sprintf(smi_obj_name1, "CLAS12::%s", epics_name);
smiui_send_command(smi_obj_name1, smi_command);
printf("smi: smi_obj_name=%s smi_command=%s id=%d board=%d chas=%d abs_error=%d \n", smi_obj_name1, smi_command, id, board, Demand[id].board[board].nchannels, absent_error);
boards_status[id][board][board_part]=b_status_res;
}
UNLOCK_MAINFRAME(id);
return(CAENHV_OK);
}
/* mainframe thread */
void *
sy527Thread(void *arg)
{
int id, i, ret, status;
id=((THREAD *)arg)->threadid;
printf("[%2d] starts thread\n",id);
while(1)
{
printf("sy527Thread 1\n");
#ifdef vxWorks
ttsleep(100);
#else
sleep(1);
#endif
LOCK_MAINFRAME(id);
if(force_exit[id])
{
UNLOCK_MAINFRAME(id);
break;
}
/***** talk to mainframe here *****/
/* sets all existing boards in mainframe 'id' with 'setflag' */
if(Demand[id]->setflag == 1)
{
status = CAENHV_OK;
for(i=0; i<Measure[id]->nslots; i++)
{
if(Demand[id]->board[i].nchannels > 0)
{
if(Demand[id]->board[i].setflag == 1)
{
/*printf("[%2d] sets board %d\n",id,i);*/
ret = sy527SetBoard(id,i);
if(ret == CAENHV_OK) Demand[id]->board[i].setflag = 0;
else status |= CAENHV_SYSERR;
}
}
}
if(status == CAENHV_OK) Demand[id]->setflag = 0;
}
/* gets all existing boards in mainframe 'id' */
for(i=0; i<Measure[id]->nslots; i++)
{
/* measure all active boards */
if(Measure[id]->board[i].nchannels > 0)
{
/*printf("[%2d] reads out board %d\n",id,i);*/
ret = sy527GetBoard(id,i);
}
}
/**********************************/
UNLOCK_MAINFRAME(id);
}
printf("[%2d] exit thread\n",id);
/*return;*/
}