Ejemplo n.º 1
0
/* The Device callback */
static usb_status_t USB_DeviceCallback(usb_device_handle handle, uint32_t event, void *param)
{
    usb_status_t error = kStatus_USB_Error;
    uint16_t *temp16 = (uint16_t *)param;
    uint8_t *temp8 = (uint8_t *)param;

    switch (event)
    {
        case kUSB_DeviceEventBusReset:
        {
            /* USB bus reset signal detected */
            g_UsbDeviceComposite.attach = 0U;
            error = kStatus_USB_Success;
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0U)
            /* Get USB speed to configure the device, including max packet size and interval of the endpoints. */
            if (kStatus_USB_Success == USB_DeviceClassGetSpeed(CONTROLLER_ID, &g_UsbDeviceComposite.speed))
            {
                USB_DeviceSetSpeed(handle, g_UsbDeviceComposite.speed);
            }
#endif
        }
        break;
        case kUSB_DeviceEventSetConfiguration:
            if (param)
            {
                /* Set device configuration request */
                g_UsbDeviceComposite.attach = 1U;
                g_UsbDeviceComposite.currentConfiguration = *temp8;
                USB_DeviceHidMouseSetConfigure(g_UsbDeviceComposite.hidMouseHandle, *temp8);
                USB_DeviceHidKeyboardSetConfigure(g_UsbDeviceComposite.hidKeyboardHandle, *temp8);
                error = kStatus_USB_Success;
            }
            break;
        case kUSB_DeviceEventSetInterface:
            if (g_UsbDeviceComposite.attach)
            {
                /* Set device interface request */
                uint8_t interface = (uint8_t)((*temp16 & 0xFF00U) >> 0x08U);
                uint8_t alternateSetting = (uint8_t)(*temp16 & 0x00FFU);
                if (interface < USB_COMPOSITE_INTERFACE_COUNT)
                {
                    g_UsbDeviceComposite.currentInterfaceAlternateSetting[interface] = alternateSetting;
                    USB_DeviceHidMouseSetInterface(g_UsbDeviceComposite.hidMouseHandle, interface, alternateSetting);
                    USB_DeviceHidKeyboardSetInterface(g_UsbDeviceComposite.hidKeyboardHandle, interface,
                                                      alternateSetting);
                    error = kStatus_USB_Success;
                }
            }
            break;
        case kUSB_DeviceEventGetConfiguration:
            if (param)
            {
                /* Get current configuration request */
                *temp8 = g_UsbDeviceComposite.currentConfiguration;
                error = kStatus_USB_Success;
            }
            break;
        case kUSB_DeviceEventGetInterface:
            if (param)
            {
                /* Get current alternate setting of the interface request */
                uint8_t interface = (uint8_t)((*temp16 & 0xFF00U) >> 0x08U);
                if (interface < USB_COMPOSITE_INTERFACE_COUNT)
                {
                    *temp16 = (*temp16 & 0xFF00U) | g_UsbDeviceComposite.currentInterfaceAlternateSetting[interface];
                    error = kStatus_USB_Success;
                }
                else
                {
                    error = kStatus_USB_InvalidRequest;
                }
            }
            break;
        case kUSB_DeviceEventGetDeviceDescriptor:
            if (param)
            {
                /* Get device descriptor request */
                error = USB_DeviceGetDeviceDescriptor(handle, (usb_device_get_device_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetConfigurationDescriptor:
            if (param)
            {
                /* Get device configuration descriptor request */
                error = USB_DeviceGetConfigurationDescriptor(handle,
                                                             (usb_device_get_configuration_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetStringDescriptor:
            if (param)
            {
                /* Get device string descriptor request */
                error = USB_DeviceGetStringDescriptor(handle, (usb_device_get_string_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetHidDescriptor:
            if (param)
            {
                /* Get hid descriptor request */
                error = USB_DeviceGetHidDescriptor(handle, (usb_device_get_hid_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetHidReportDescriptor:
            if (param)
            {
                /* Get hid report descriptor request */
                error =
                    USB_DeviceGetHidReportDescriptor(handle, (usb_device_get_hid_report_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetHidPhysicalDescriptor:
            if (param)
            {
                /* Get hid physical descriptor request */
                error = USB_DeviceGetHidPhysicalDescriptor(handle,
                                                           (usb_device_get_hid_physical_descriptor_struct_t *)param);
            }
            break;
        default:
            break;
    }
Ejemplo n.º 2
0
/*!
 * @brief USB device callback function.
 *
 * This function handles the usb device specific requests.
 *
 * @param handle           The USB device handle.
 * @param event            The USB device event type.
 * @param param            The parameter of the device specific request.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
usb_status_t USB_DeviceCallback(usb_device_handle handle, uint32_t event, void *param)
{
    usb_status_t error = kStatus_USB_Error;
    uint8_t *temp8 = (uint8_t *)param;
    uint16_t *temp16 = (uint16_t *)param;

    switch (event)
    {
        case kUSB_DeviceEventBusReset:
        {
            /* The device BUS reset signal detected */
            s_audioGenerator.attach = 0U;
            error = kStatus_USB_Success;
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0U)
            if (kStatus_USB_Success == USB_DeviceClassGetSpeed(CONTROLLER_ID, &s_audioGenerator.speed))
            {
                USB_DeviceSetSpeed(handle, s_audioGenerator.speed);
            }
#endif
        }
        break;
        case kUSB_DeviceEventSetConfiguration:
            if (USB_AUDIO_GENERATOR_CONFIGURE_INDEX == (*temp8))
            {
                /* Set the configuration request */
                s_audioGenerator.attach = 1U;
                s_audioGenerator.currentConfiguration = *temp8;
            }
            break;
        case kUSB_DeviceEventSetInterface:

            if (s_audioGenerator.attach)
            {
                /* Set alternateSetting of the interface request */
                uint8_t interface = (uint8_t)((*temp16 & 0xFF00U) >> 0x08U);
                uint8_t alternateSetting = (uint8_t)(*temp16 & 0x00FFU);

                if (s_audioGenerator.currentInterfaceAlternateSetting[interface] != alternateSetting)
                {
                    s_audioGenerator.currentInterfaceAlternateSetting[interface] = alternateSetting;
                    if (alternateSetting == 1U)
                    {
                        USB_PrepareData();
                        USB_DeviceAudioSend(s_audioGenerator.audioHandle, USB_AUDIO_STREAM_ENDPOINT, s_wavBuff,
                                            (USB_SPEED_HIGH == s_audioGenerator.speed) ? HS_ISO_IN_ENDP_PACKET_SIZE :
                                                                                         FS_ISO_IN_ENDP_PACKET_SIZE);
                    }
                }
            }
            break;
        case kUSB_DeviceEventGetConfiguration:
            if (param)
            {
                /* Get the current configuration request */
                *temp8 = s_audioGenerator.currentConfiguration;
                error = kStatus_USB_Success;
            }
            break;
        case kUSB_DeviceEventGetInterface:
            if (param)
            {
                uint8_t interface = (uint8_t)((*temp16 & 0xFF00U) >> 0x08U);
                if (interface < USB_AUDIO_GENERATOR_INTERFACE_COUNT)
                {
                    *temp16 = (*temp16 & 0xFF00U) | s_audioGenerator.currentInterfaceAlternateSetting[interface];
                    error = kStatus_USB_Success;
                }
                else
                {
                    error = kStatus_USB_InvalidRequest;
                }
            }
            break;
        case kUSB_DeviceEventGetDeviceDescriptor:
            if (param)
            {
                /* Get the device descriptor request */
                error = USB_DeviceGetDeviceDescriptor(handle, (usb_device_get_device_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetConfigurationDescriptor:
            if (param)
            {
                /* Get the configuration descriptor request */
                error = USB_DeviceGetConfigurationDescriptor(handle,
                                                             (usb_device_get_configuration_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetStringDescriptor:
            if (param)
            {
                /* Get the string descriptor request */
                error = USB_DeviceGetStringDescriptor(handle, (usb_device_get_string_descriptor_struct_t *)param);
            }
            break;
        default:
            break;
    }
Ejemplo n.º 3
0
/*!
 * @brief device callback function.
 *
 * This function handle the usb standard event. more information, please refer to usb spec chapter 9.
 * @param handle          The USB device handle.
 * @param event           The USB device event type.
 * @param param           The parameter of the device specific request.
 * @return kStatus_USB_Success or error.
 */
usb_status_t USB_DeviceCallback(usb_device_handle handle, uint32_t event, void *param)
{
    usb_status_t error = kStatus_USB_Error;
    uint16_t *temp16 = (uint16_t *)param;
    uint8_t *temp8 = (uint8_t *)param;
    switch (event)
    {
        case kUSB_DeviceEventBusReset:
        {
            g_msc.attach = 0;
            error = kStatus_USB_Success;
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0)
            if (kStatus_USB_Success == USB_DeviceClassGetSpeed(CONTROLLER_ID, &g_msc.speed))
            {
                USB_DeviceSetSpeed(handle, g_msc.speed);
            }
#endif
        }
        break;
        case kUSB_DeviceEventSetConfiguration:
            if (param)
            {
                g_msc.attach = 1;
                g_msc.currentConfiguration = *temp8;
            }
            break;
        case kUSB_DeviceEventSetInterface:
            if (g_msc.attach)
            {
                uint8_t interface = (uint8_t)((*temp16 & 0xFF00U) >> 0x08U);
                uint8_t alternateSetting = (uint8_t)(*temp16 & 0x00FFU);
                if (interface < USB_MSC_INTERFACE_COUNT)
                {
                    g_msc.currentInterfaceAlternateSetting[interface] = alternateSetting;
                }
            }
            break;
        case kUSB_DeviceEventGetConfiguration:
            if (param)
            {
                *temp8 = g_msc.currentConfiguration;
                error = kStatus_USB_Success;
            }
            break;
        case kUSB_DeviceEventGetInterface:
            if (param)
            {
                uint8_t interface = (uint8_t)((*temp16 & 0xFF00U) >> 0x08U);
                if (interface < USB_INTERFACE_COUNT)
                {
                    *temp16 = (*temp16 & 0xFF00U) | g_msc.currentInterfaceAlternateSetting[interface];
                    error = kStatus_USB_Success;
                }
                else
                {
                    error = kStatus_USB_InvalidRequest;
                }
            }
            break;
        case kUSB_DeviceEventGetDeviceDescriptor:
            if (param)
            {
                error = USB_DeviceGetDeviceDescriptor(handle, (usb_device_get_device_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetConfigurationDescriptor:
            if (param)
            {
                error = USB_DeviceGetConfigurationDescriptor(handle,
                                                             (usb_device_get_configuration_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetStringDescriptor:
            if (param)
            {
                error = USB_DeviceGetStringDescriptor(handle, (usb_device_get_string_descriptor_struct_t *)param);
            }
            break;
        default:
            break;
    }
Ejemplo n.º 4
0
/*!
 * @brief USB device callback function.
 *
 * This function handles the usb device specific requests.
 *
 * @param handle          The USB device handle.
 * @param event           The USB device event type.
 * @param param           The parameter of the device specific request.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
usb_status_t USB_DeviceCallback(usb_device_handle handle, uint32_t event, void *param)
{
    usb_status_t error = kStatus_USB_Error;
    uint16_t *temp16 = (uint16_t *)param;
    uint8_t *temp8 = (uint8_t *)param;

    switch (event)
    {
        case kUSB_DeviceEventBusReset:
        {
            s_cdcVcom.attach = 0;
#if defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0)
            if (kStatus_USB_Success == USB_DeviceClassGetSpeed(CONTROLLER_ID, &s_cdcVcom.speed))
            {
                USB_DeviceSetSpeed(handle, s_cdcVcom.speed);
            }
#endif
        }
        break;
        case kUSB_DeviceEventSetConfiguration:
            if (param)
            {
                s_cdcVcom.attach = 1;
                s_cdcVcom.currentConfiguration = *temp8;
                if (USB_CDC_VCOM_CONFIGURE_INDEX == (*temp8))
                {
                    /* Schedule buffer for receive */
                    USB_DeviceCdcAcmRecv(s_cdcVcom.cdcAcmHandle, USB_CDC_VCOM_BULK_OUT_ENDPOINT, s_currRecvBuf,
                                         g_UsbDeviceCdcVcomDicEndpoints[0].maxPacketSize);
                }
            }
            break;
        case kUSB_DeviceEventSetInterface:
            if (s_cdcVcom.attach)
            {
                uint8_t interface = (uint8_t)((*temp16 & 0xFF00U) >> 0x08U);
                uint8_t alternateSetting = (uint8_t)(*temp16 & 0x00FFU);
                if (interface < USB_CDC_VCOM_INTERFACE_COUNT)
                {
                    s_cdcVcom.currentInterfaceAlternateSetting[interface] = alternateSetting;
                }
            }
            break;
        case kUSB_DeviceEventGetConfiguration:
            break;
        case kUSB_DeviceEventGetInterface:
            break;
        case kUSB_DeviceEventGetDeviceDescriptor:
            if (param)
            {
                error = USB_DeviceGetDeviceDescriptor(handle, (usb_device_get_device_descriptor_struct_t *)param);
            }
            break;
        case kUSB_DeviceEventGetConfigurationDescriptor:
            if (param)
            {
                error = USB_DeviceGetConfigurationDescriptor(handle,
                                                             (usb_device_get_configuration_descriptor_struct_t *)param);
            }
            break;
        default:
            break;
    }