Ejemplo n.º 1
0
void USB_Init(
               #if defined(USB_CAN_BE_BOTH)
               const uint8_t Mode
               #endif

               #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
               ,
               #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
               void
               #endif

               #if !defined(USE_STATIC_OPTIONS)
               const uint8_t Options
               #endif
               )
{
	#if !defined(USE_STATIC_OPTIONS)
	USB_Options = Options;
	#endif

	#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
	/* Workaround for AVR8 bootloaders that fail to turn off the OTG pad before running
	 * the loaded application. This causes VBUS detection to fail unless we first force
	 * it off to reset it. */
	USB_OTGPAD_Off();
	#endif

	if (!(USB_Options & USB_OPT_REG_DISABLED))
	  USB_REG_On();
	else
	  USB_REG_Off();

	if (!(USB_Options & USB_OPT_MANUAL_PLL))
	{
		#if defined(USB_SERIES_4_AVR)
		PLLFRQ = (1 << PDIV2);
		#endif
	}

	#if defined(USB_CAN_BE_BOTH)
	if (Mode == USB_MODE_UID)
	{
		UHWCON |=  (1 << UIDE);
		USB_INT_Enable(USB_INT_IDTI);
		USB_CurrentMode = USB_GetUSBModeFromUID();
	}
	else
	{
		UHWCON &= ~(1 << UIDE);
		USB_CurrentMode = Mode;
	}
	#endif

	USB_IsInitialized = true;

	USB_ResetInterface();
}
Ejemplo n.º 2
0
void USB_Init(
               #if defined(USB_CAN_BE_BOTH)
               const uint8_t Mode
               #endif

               #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
               ,
               #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
               void
               #endif

               #if !defined(USE_STATIC_OPTIONS)
               const uint8_t Options
               #endif
               )
{
	#if !defined(USE_STATIC_OPTIONS)
	USB_Options = Options;
	#endif

	if (!(USB_Options & USB_OPT_REG_DISABLED))
	  USB_REG_On();
	else
	  USB_REG_Off();

	if (!(USB_Options & USB_OPT_MANUAL_PLL))
	{
		#if defined(USB_SERIES_4_AVR)
		PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));
		#endif
	}

	#if defined(USB_CAN_BE_BOTH)
	if (Mode == USB_MODE_UID)
	{
		UHWCON |=  (1 << UIDE);
		USB_INT_Enable(USB_INT_IDTI);
		USB_CurrentMode = USB_GetUSBModeFromUID();
	}
	else
	{
		UHWCON &= ~(1 << UIDE);
		USB_CurrentMode = Mode;
	}
	#endif

	USB_IsInitialized = true;

	USB_ResetInterface();
}
Ejemplo n.º 3
0
void USB_Init(
               #if defined(USB_CAN_BE_BOTH)
               const uint8_t Mode
               #endif

               #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
               ,
               #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
               void
               #endif

               #if !defined(USE_STATIC_OPTIONS)
               const uint8_t Options
               #endif
               )
{
	#if !defined(USE_STATIC_OPTIONS)
	USB_Options = Options;
	#endif

	#if defined(USB_CAN_BE_BOTH)
	if (Mode == USB_MODE_UID)
	{
		AVR32_USBB.USBCON.uide = true;
		USB_INT_Enable(USB_INT_IDTI);
		USB_CurrentMode = USB_GetUSBModeFromUID();
	}
	else
	{
		AVR32_USBB.USBCON.uide = false;
		USB_CurrentMode = Mode;
	}
	#else
	AVR32_USBB.USBCON.uide = false;
	#endif

	USB_IsInitialized = true;

	USB_ResetInterface();
}
Ejemplo n.º 4
0
ISR(USB_GEN_vect, ISR_BLOCK)
{
	#if defined(USB_CAN_BE_DEVICE)
	#if !defined(NO_SOF_EVENTS)
	if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI))
	{
		USB_INT_Clear(USB_INT_SOFI);

		EVENT_USB_Device_StartOfFrame();
	}
	#endif

	#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
	if (USB_INT_HasOccurred(USB_INT_VBUSTI) && USB_INT_IsEnabled(USB_INT_VBUSTI))
	{
		USB_INT_Clear(USB_INT_VBUSTI);

		if (USB_VBUS_GetStatus())
		{
			if (!(USB_Options & USB_OPT_MANUAL_PLL))
			{
				USB_PLL_On();
				while (!(USB_PLL_IsReady()));
			}

			USB_DeviceState = DEVICE_STATE_Powered;
			EVENT_USB_Device_Connect();
		}
		else
		{
			if (!(USB_Options & USB_OPT_MANUAL_PLL))
			  USB_PLL_Off();

			USB_DeviceState = DEVICE_STATE_Unattached;
			EVENT_USB_Device_Disconnect();
		}
	}
	#endif

	if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI))
	{
		USB_INT_Disable(USB_INT_SUSPI);
		USB_INT_Enable(USB_INT_WAKEUPI);

		USB_CLK_Freeze();

		if (!(USB_Options & USB_OPT_MANUAL_PLL))
		  USB_PLL_Off();

		#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
		USB_DeviceState = DEVICE_STATE_Unattached;
		EVENT_USB_Device_Disconnect();
		#else
		USB_DeviceState = DEVICE_STATE_Suspended;
		EVENT_USB_Device_Suspend();
		#endif
	}

	if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI))
	{
		if (!(USB_Options & USB_OPT_MANUAL_PLL))
		{
			USB_PLL_On();
			while (!(USB_PLL_IsReady()));
		}

		USB_CLK_Unfreeze();

		USB_INT_Clear(USB_INT_WAKEUPI);

		USB_INT_Disable(USB_INT_WAKEUPI);
		USB_INT_Enable(USB_INT_SUSPI);

		if (USB_Device_ConfigurationNumber)
		  USB_DeviceState = DEVICE_STATE_Configured;
		else
		  USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered;

		#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
		EVENT_USB_Device_Connect();
		#else
		EVENT_USB_Device_WakeUp();
		#endif
	}

	if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI))
	{
		USB_INT_Clear(USB_INT_EORSTI);

		USB_DeviceState                = DEVICE_STATE_Default;
		USB_Device_ConfigurationNumber = 0;

		USB_INT_Clear(USB_INT_SUSPI);
		USB_INT_Disable(USB_INT_SUSPI);
		USB_INT_Enable(USB_INT_WAKEUPI);

		Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
		                           ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize,
		                           ENDPOINT_BANK_SINGLE);

		#if defined(INTERRUPT_CONTROL_ENDPOINT)
		USB_INT_Enable(USB_INT_RXSTPI);
		#endif

		EVENT_USB_Device_Reset();
	}
	#endif

	#if defined(USB_CAN_BE_HOST)
	#if !defined(NO_SOF_EVENTS)
	if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI))
	{
		USB_INT_Clear(USB_INT_HSOFI);

		EVENT_USB_Host_StartOfFrame();
	}
	#endif

	if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI))
	{
		USB_INT_Clear(USB_INT_DDISCI);
		USB_INT_Clear(USB_INT_DCONNI);
		USB_INT_Disable(USB_INT_DDISCI);

		EVENT_USB_Host_DeviceUnattached();

		USB_ResetInterface();
	}

	if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI))
	{
		USB_INT_Clear(USB_INT_VBERRI);

		USB_Host_VBUS_Manual_Off();
		USB_Host_VBUS_Auto_Off();

		EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip);
		EVENT_USB_Host_DeviceUnattached();

		USB_HostState = HOST_STATE_Unattached;
	}

	if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI))
	{
		USB_INT_Clear(USB_INT_SRPI);
		USB_INT_Disable(USB_INT_SRPI);

		EVENT_USB_Host_DeviceAttached();

		USB_INT_Enable(USB_INT_DDISCI);

		USB_HostState = HOST_STATE_Powered;
	}

	if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI))
	{
		USB_INT_Clear(USB_INT_BCERRI);

		EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0);
		EVENT_USB_Host_DeviceUnattached();

		USB_ResetInterface();
	}
	#endif

	#if defined(USB_CAN_BE_BOTH)
	if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI))
	{
		USB_INT_Clear(USB_INT_IDTI);

		if (USB_DeviceState != DEVICE_STATE_Unattached)
		  EVENT_USB_Device_Disconnect();

		if (USB_HostState != HOST_STATE_Unattached)
		  EVENT_USB_Host_DeviceUnattached();

		USB_CurrentMode = USB_GetUSBModeFromUID();
		USB_ResetInterface();

		EVENT_USB_UIDChange();
	}
	#endif
}
Ejemplo n.º 5
0
void USB_Init(
               #if defined(USB_CAN_BE_BOTH)
               const uint8_t Mode
               #endif

               #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
               ,
               #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
               void
               #endif
			   
               #if !defined(USE_STATIC_OPTIONS)
               const uint8_t Options
               #endif
               )
{
	#if defined(USB_CAN_BE_BOTH)
	USB_CurrentMode = Mode;
	#endif

	#if !defined(USE_STATIC_OPTIONS)
	USB_Options = Options;
	#endif

	#if defined(USB_CAN_BE_HOST)
	USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
	#endif
	
	#if defined(USB_DEVICE_ONLY) && (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
	UHWCON |= (1 << UIMOD);
	#elif defined(USB_HOST_ONLY)
	UHWCON &= ~(1 << UIMOD);
	#elif defined(USB_CAN_BE_BOTH)
	if (Mode == USB_MODE_UID)
	{
		UHWCON |=  (1 << UIDE);

		USB_INT_Clear(USB_INT_IDTI);
		USB_INT_Enable(USB_INT_IDTI);
		
		USB_CurrentMode = USB_GetUSBModeFromUID();
	}
	else if (Mode == USB_MODE_DEVICE)
	{
		UHWCON |=  (1 << UIMOD);
	}
	else if (Mode == USB_MODE_HOST)			
	{
		UHWCON &= ~(1 << UIMOD);
	}
	else
	{
		EVENT_USB_InitFailure(USB_INITERROR_NoUSBModeSpecified);
		return;
	}
	#endif
	
	USB_ResetInterface();

	#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
	USB_OTGPAD_On();
	#endif

	USB_IsInitialized = true;

	sei();
}
Ejemplo n.º 6
0
void USB_ResetInterface(void)
{
	USB_INT_DisableAllInterrupts();
	USB_INT_ClearAllInterrupts();
	
	#if defined(USB_CAN_BE_HOST)
	USB_HostState   = HOST_STATE_Unattached;
	#endif
	
	#if defined(USB_CAN_BE_DEVICE)
	USB_DeviceState = DEVICE_STATE_Unattached;
	USB_ConfigurationNumber  = 0;

	#if !defined(NO_DEVICE_REMOTE_WAKEUP)
		USB_RemoteWakeupEnabled  = false;
	#endif
	
	#if !defined(NO_DEVICE_SELF_POWER)
		USB_CurrentlySelfPowered = false;
	#endif
	#endif
	
	if (!(USB_Options & USB_OPT_MANUAL_PLL))
	{
		#if defined(USB_SERIES_4_AVR)
		PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));
		#endif

		USB_PLL_On();
		while (!(USB_PLL_IsReady()));
	}
	
	USB_Controller_Reset();
	
	#if defined(USB_CAN_BE_BOTH)
	if (UHWCON & (1 << UIDE))
	{
		USB_INT_Clear(USB_INT_IDTI);
		USB_INT_Enable(USB_INT_IDTI);
		USB_CurrentMode = USB_GetUSBModeFromUID();
	}
	#endif
		
	if (!(USB_Options & USB_OPT_REG_DISABLED))
	  USB_REG_On();
	else
	  USB_REG_Off();
	
	USB_CLK_Unfreeze();

	#if (defined(USB_CAN_BE_DEVICE) && (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)))
	if (USB_CurrentMode == USB_MODE_DEVICE)
	{
		if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
		  USB_Device_SetLowSpeed();
		else
		  USB_Device_SetFullSpeed();
	}
	#endif
	
	#if (defined(USB_CAN_BE_DEVICE) && !defined(FIXED_CONTROL_ENDPOINT_SIZE))
	if (USB_CurrentMode == USB_MODE_DEVICE)
	{
		USB_Descriptor_Device_t* DeviceDescriptorPtr;

		if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
		{		  
			#if defined(USE_RAM_DESCRIPTORS)
			USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
			#elif defined(USE_EEPROM_DESCRIPTORS)
			USB_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
			#else
			USB_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
			#endif
		}
	}
	#endif

	USB_Attach();
	
	#if defined(USB_DEVICE_ONLY)
	USB_INT_Clear(USB_INT_SUSPEND);
	USB_INT_Enable(USB_INT_SUSPEND);
	USB_INT_Clear(USB_INT_EORSTI);
	USB_INT_Enable(USB_INT_EORSTI);

		#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
		USB_INT_Enable(USB_INT_VBUS);
		#endif
	#elif defined(USB_HOST_ONLY)
	USB_Host_HostMode_On();
	
	USB_Host_VBUS_Auto_Off();
	USB_OTGPAD_Off();

	USB_Host_VBUS_Manual_Enable();
	USB_Host_VBUS_Manual_On();
	
	USB_INT_Enable(USB_INT_SRPI);
	USB_INT_Enable(USB_INT_BCERRI);
	#else
	if (USB_CurrentMode == USB_MODE_DEVICE)
	{
		USB_INT_Clear(USB_INT_SUSPEND);
		USB_INT_Enable(USB_INT_SUSPEND);
		USB_INT_Clear(USB_INT_EORSTI);
		USB_INT_Enable(USB_INT_EORSTI);

		#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
		USB_INT_Enable(USB_INT_VBUS);
		#endif

		#if defined(CONTROL_ONLY_DEVICE)
		UENUM = ENDPOINT_CONTROLEP;
		#endif
	}
	else if (USB_CurrentMode == USB_MODE_HOST)
	{
		USB_Host_HostMode_On();
		
		USB_Host_VBUS_Auto_Off();
		USB_OTGPAD_Off();

		USB_Host_VBUS_Manual_Enable();
		USB_Host_VBUS_Manual_On();
		
		USB_INT_Enable(USB_INT_SRPI);
		USB_INT_Enable(USB_INT_BCERRI);
	}
	#endif
}
Ejemplo n.º 7
0
void USB_Init(
               #if defined(USB_CAN_BE_BOTH)
               const uint8_t Mode
               #endif

               #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
               ,
               #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
               void
               #endif
			   
               #if !defined(USE_STATIC_OPTIONS)
               const uint8_t Options
               #endif
               )
{
	if (USB_IsInitialized)
	  USB_ShutDown();

	#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY))
	USB_CurrentMode = Mode;
	#endif
	
	#if defined(USB_DEVICE_ONLY)
		#if defined(USB_FULL_CONTROLLER)
		UHWCON |= (1 << UIMOD);
		#endif
	#elif defined(USB_HOST_ONLY)
	UHWCON &= ~(1 << UIMOD);
	#else
	if (Mode == USB_MODE_NONE)
	{
		RAISE_EVENT(USB_PowerOnFail, POWERON_ERROR_NoUSBModeSpecified);
		return;
	}
	else if (Mode == USB_MODE_UID)
	{
		UHWCON |=  (1 << UIDE);

		USB_INT_Clear(USB_INT_IDTI);
		USB_INT_Enable(USB_INT_IDTI);
		
		USB_CurrentMode = USB_GetUSBModeFromUID();
	}
	else if (Mode == USB_MODE_DEVICE)
	{
		UHWCON |=  (1 << UIMOD);
	}
	else if (Mode == USB_MODE_HOST)			
	{
		UHWCON &= ~(1 << UIMOD);
	}
	#endif

	#if defined(USB_CAN_BE_BOTH)
	USB_InitTaskPointer();
	#else
	USB_IsInitialized = true;
	#endif

	#if defined(USB_CAN_BE_HOST)
	USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
	#endif
	
	#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
	USB_OTGPAD_On();
	#endif
	
	#if !defined(USE_STATIC_OPTIONS)
	USB_Options = Options;
	#endif

	#if defined(USB_DEVICE_ONLY)
		#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
		USB_INT_Enable(USB_INT_VBUS);
		#else
		USB_SetupInterface();
		#endif
	#elif defined(USB_HOST_ONLY)
	USB_SetupInterface();
	#else
	if (USB_CurrentMode == USB_MODE_DEVICE)
	  USB_INT_Enable(USB_INT_VBUS);
	else
	  USB_SetupInterface();
	#endif
	
	sei();
}
Ejemplo n.º 8
0
void USB_SetupInterface(void)
{
	USB_INT_DisableAllInterrupts();
	USB_INT_ClearAllInterrupts();

	USB_IsConnected         = false;
	
	#if defined(USB_CAN_BE_BOTH)
	USB_IsInitialized       = false;
	#endif

	#if defined(USB_CAN_BE_HOST)
	USB_HostState           = HOST_STATE_Unattached;
	#endif

	#if defined(USB_CAN_BE_DEVICE)
	USB_ConfigurationNumber  = 0;
	USB_RemoteWakeupEnabled  = false;
	USB_CurrentlySelfPowered = false;
	#endif
	
	#if defined(USB_MODIFIED_FULL_CONTROLLER) && !defined(MANUAL_PLL_CONTROL)
	PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));
	#endif
	
	#if !defined(MANUAL_PLL_CONTROL)
	USB_PLL_On();
	#endif

	while (!(USB_PLL_IsReady()));
		
	USB_Interface_Reset();
	
	#if defined(USB_CAN_BE_BOTH)
	if (UHWCON & (1 << UIDE))
	{
		USB_INT_Clear(USB_INT_IDTI);
		USB_INT_Enable(USB_INT_IDTI);
		USB_CurrentMode = USB_GetUSBModeFromUID();
	}
	#elif defined(USB_DEVICE_ONLY)
		#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
		USB_INT_Enable(USB_INT_VBUS);
		#endif
	#endif
		
	if (!(USB_Options & USB_OPT_REG_DISABLED))
	  USB_REG_On();
	
	USB_CLK_Unfreeze();

	#if (defined(USB_CAN_BE_DEVICE) && (defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)))
	if (USB_CurrentMode == USB_MODE_DEVICE)
	{
		#ifdef CUL_V3
		USB_Device_SetHighSpeed();
		#else
		if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
		  USB_Device_SetLowSpeed();
		else
		  USB_Device_SetHighSpeed();
		#endif
		  
		USB_INT_Enable(USB_INT_VBUS);
	}
	#endif

	#if defined(USB_CAN_BE_HOST)
	USB_INT_Enable(USB_INT_VBERRI);
	
	if (USB_CurrentMode == USB_MODE_HOST)
	  USB_Host_PrepareForDeviceConnect();
	#endif
	
	#if defined(USB_CAN_BE_DEVICE)
	USB_Descriptor_Device_t* DeviceDescriptorPtr;
	uint16_t                 DeviceDescriptorSize;

	if (USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr, &DeviceDescriptorSize) == true)
	{		  
		#if defined(USE_RAM_DESCRIPTORS)
			USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
		#elif defined(USE_EEPROM_DESCRIPTORS)
			USB_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
		#else
			USB_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
		#endif
	}
	#endif

	USB_Attach();
	
	#if defined(USB_DEVICE_ONLY)	
	USB_INT_Enable(USB_INT_SUSPEND);
	USB_INT_Enable(USB_INT_EORSTI);	
	#elif defined(USB_HOST_ONLY)
	USB_Host_HostMode_On();
	#else
	if (USB_CurrentMode == USB_MODE_DEVICE)
	{
		USB_INT_Enable(USB_INT_SUSPEND);
		USB_INT_Enable(USB_INT_EORSTI);
	}
	else if (USB_CurrentMode == USB_MODE_HOST)
	{
		USB_Host_HostMode_On();
	}
	#endif
	
	#if defined(USB_CAN_BE_BOTH)
	USB_InitTaskPointer();
	#endif
}