void USB_Host_PrepareForDeviceConnect(void)
{
USB_Host_VBUS_Auto_Off();
USB_OTGPAD_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
USB_HostState = HOST_STATE_Unattached;
}
static void USB_Init_Host(void)
{
USB_HostState = HOST_STATE_Unattached;
USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
USB_Attach();
}
void USB_ResetInterface(void)
{
USB_INT_DisableAllInterrupts();
USB_INT_ClearAllInterrupts();
#if defined(USB_CAN_BE_HOST)
USB_HostState = HOST_STATE_Unattached;
#endif
#if defined(USB_CAN_BE_DEVICE)
USB_DeviceState = DEVICE_STATE_Unattached;
USB_ConfigurationNumber = 0;
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
USB_RemoteWakeupEnabled = false;
#endif
#if !defined(NO_DEVICE_SELF_POWER)
USB_CurrentlySelfPowered = false;
#endif
#endif
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
#if defined(USB_SERIES_4_AVR)
PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));
#endif
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_Controller_Reset();
#if defined(USB_CAN_BE_BOTH)
if (UHWCON & (1 << UIDE))
{
USB_INT_Clear(USB_INT_IDTI);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
#endif
if (!(USB_Options & USB_OPT_REG_DISABLED))
USB_REG_On();
else
USB_REG_Off();
USB_CLK_Unfreeze();
#if (defined(USB_CAN_BE_DEVICE) && (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)))
if (USB_CurrentMode == USB_MODE_DEVICE)
{
if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
USB_Device_SetLowSpeed();
else
USB_Device_SetFullSpeed();
}
#endif
#if (defined(USB_CAN_BE_DEVICE) && !defined(FIXED_CONTROL_ENDPOINT_SIZE))
if (USB_CurrentMode == USB_MODE_DEVICE)
{
USB_Descriptor_Device_t* DeviceDescriptorPtr;
if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
{
#if defined(USE_RAM_DESCRIPTORS)
USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
#elif defined(USE_EEPROM_DESCRIPTORS)
USB_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#else
USB_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#endif
}
}
#endif
USB_Attach();
#if defined(USB_DEVICE_ONLY)
USB_INT_Clear(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_SUSPEND);
USB_INT_Clear(USB_INT_EORSTI);
USB_INT_Enable(USB_INT_EORSTI);
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
USB_INT_Enable(USB_INT_VBUS);
#endif
#elif defined(USB_HOST_ONLY)
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_Off();
USB_OTGPAD_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
#else
if (USB_CurrentMode == USB_MODE_DEVICE)
{
USB_INT_Clear(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_SUSPEND);
USB_INT_Clear(USB_INT_EORSTI);
USB_INT_Enable(USB_INT_EORSTI);
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
USB_INT_Enable(USB_INT_VBUS);
#endif
#if defined(CONTROL_ONLY_DEVICE)
UENUM = ENDPOINT_CONTROLEP;
#endif
}
else if (USB_CurrentMode == USB_MODE_HOST)
{
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_Off();
USB_OTGPAD_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
}
#endif
}
void USB_Host_ProcessNextHostState(void)
{
uint8_t ErrorCode = HOST_ENUMERROR_NoError;
uint8_t SubErrorCode = HOST_ENUMERROR_NoError;
static uint16_t WaitMSRemaining;
static uint8_t PostWaitState;
switch (USB_HostState)
{
case HOST_STATE_WaitForDevice:
if (WaitMSRemaining)
{
if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
{
USB_HostState = PostWaitState;
ErrorCode = HOST_ENUMERROR_WaitStage;
break;
}
if (!(--WaitMSRemaining))
USB_HostState = PostWaitState;
}
break;
case HOST_STATE_Powered:
WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle;
break;
case HOST_STATE_Powered_WaitForDeviceSettle:
if (WaitMSRemaining--)
{
Delay_MS(1);
break;
}
else
{
USB_Host_VBUS_Manual_Off();
USB_OTGPAD_On();
USB_Host_VBUS_Auto_Enable();
USB_Host_VBUS_Auto_On();
#if defined(NO_AUTO_VBUS_MANAGEMENT)
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
#endif
USB_HostState = HOST_STATE_Powered_WaitForConnect;
}
break;
case HOST_STATE_Powered_WaitForConnect:
if (USB_INT_HasOccurred(USB_INT_DCONNI))
{
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_VBERRI);
USB_INT_Enable(USB_INT_VBERRI);
USB_Host_ResumeBus();
Pipe_ClearPipes();
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset);
}
break;
case HOST_STATE_Powered_DoReset:
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe);
break;
case HOST_STATE_Powered_ConfigPipe:
if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1)))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_HostState = HOST_STATE_Default;
break;
case HOST_STATE_Default:
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Device << 8),
.wIndex = 0,
.wLength = 8,
};
uint8_t DataBuffer[8];
Pipe_SelectPipe(PIPE_CONTROLPIPE);
if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
USB_Host_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
break;
case HOST_STATE_Default_PostReset:
if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1)))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetAddress,
.wValue = USB_HOST_DEVICEADDRESS,
.wIndex = 0,
.wLength = 0,
};
if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
break;
case HOST_STATE_Default_PostAddressSet:
USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);
USB_HostState = HOST_STATE_Addressed;
EVENT_USB_Host_DeviceEnumerationComplete();
break;
default:
break;
}
if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
{
EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode);
USB_Host_VBUS_Auto_Off();
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
}
uint8_t USB_Host_WaitMS(uint8_t MS)
{
bool BusSuspended = USB_Host_IsBusSuspended();
uint8_t ErrorCode = HOST_WAITERROR_Successful;
bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
USB_INT_Disable(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_HSOFI);
USB_Host_ResumeBus();
while (MS)
{
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
MS--;
}
if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host))
{
ErrorCode = HOST_WAITERROR_DeviceDisconnect;
break;
}
if (Pipe_IsError())
{
Pipe_ClearError();
ErrorCode = HOST_WAITERROR_PipeError;
break;
}
if (Pipe_IsStalled())
{
Pipe_ClearStall();
ErrorCode = HOST_WAITERROR_SetupStalled;
break;
}
}
if (BusSuspended)
USB_Host_SuspendBus();
if (HSOFIEnabled)
USB_INT_Enable(USB_INT_HSOFI);
return ErrorCode;
}
static void USB_Host_ResetDevice(void)
{
bool BusSuspended = USB_Host_IsBusSuspended();
USB_INT_Disable(USB_INT_DDISCI);
USB_Host_ResetBus();
while (!(USB_Host_IsBusResetComplete()));
USB_Host_ResumeBus();
USB_Host_ConfigurationNumber = 0;
bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
USB_INT_Disable(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_HSOFI);
for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
/* Workaround for powerless-pull-up devices. After a USB bus reset,
all disconnection interrupts are suppressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_DDISCI);
break;
}
Delay_MS(1);
}
if (HSOFIEnabled)
USB_INT_Enable(USB_INT_HSOFI);
if (BusSuspended)
USB_Host_SuspendBus();
USB_INT_Enable(USB_INT_DDISCI);
}
void USB_Host_ProcessNextHostState(void)
{
uint8_t ErrorCode = HOST_ENUMERROR_NoError;
uint8_t SubErrorCode = HOST_ENUMERROR_NoError;
static uint16_t WaitMSRemaining;
static uint8_t PostWaitState;
switch (USB_HostState)
{
case HOST_STATE_WaitForDevice:
if (WaitMSRemaining)
{
if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
{
USB_HostState = PostWaitState;
ErrorCode = HOST_ENUMERROR_WaitStage;
break;
}
if (!(--WaitMSRemaining))
USB_HostState = PostWaitState;
}
break;
case HOST_STATE_Powered:
WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle;
break;
case HOST_STATE_Powered_WaitForDeviceSettle:
if (WaitMSRemaining--)
{
_delay_ms(1);
break;
}
else
{
USB_Host_VBUS_Manual_Off();
USB_OTGPAD_On();
USB_Host_VBUS_Auto_Enable();
USB_Host_VBUS_Auto_On();
#if (BOARD == BOARD_MICROPENDOUS)
// Micropendous boards require manual control of pin PE7's UVcon function
USB_Host_VBUS_Manual_Enable();
// clear VBUSREQ; AT90USB128 2009-11 Datasheet Pg#260
OTGCON &= ~(1 << VBUSREQ);
USB_Host_VBUS_Manual_Off();
#endif
/* The above can also be done directly instead of through LUFA functions
UHWCON &= ~(1 << UVCONE);
OTGCON &= ~(1 << VBUSREQ);
OTGCON |= (1 << VBUSHWC);
DDRE |= (1 << PE7); PORTE &= ~(1 << PE7); PORTE = 0;
*/
USB_HostState = HOST_STATE_Powered_WaitForConnect;
}
break;
case HOST_STATE_Powered_WaitForConnect:
if (USB_INT_HasOccurred(USB_INT_DCONNI))
{
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_VBERRI);
USB_INT_Enable(USB_INT_VBERRI);
USB_Host_ResumeBus();
Pipe_ClearPipes();
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset);
}
break;
case HOST_STATE_Powered_DoReset:
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe);
break;
case HOST_STATE_Powered_ConfigPipe:
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_HostState = HOST_STATE_Default;
break;
case HOST_STATE_Default:
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Device << 8),
.wIndex = 0,
.wLength = 8,
};
uint8_t DataBuffer[8];
if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
break;
case HOST_STATE_Default_PostReset:
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
USB_ControlPipeSize, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetAddress,
.wValue = USB_HOST_DEVICEADDRESS,
.wIndex = 0,
.wLength = 0,
};
if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
break;
case HOST_STATE_Default_PostAddressSet:
USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);
EVENT_USB_Host_DeviceEnumerationComplete();
USB_HostState = HOST_STATE_Addressed;
break;
}
if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
{
EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode);
//USB_Host_VBUS_Auto_Off();
USB_Host_VBUS_Manual_Off();
//PORTE = 0;
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
}
uint8_t USB_Host_WaitMS(uint8_t MS)
{
bool BusSuspended = USB_Host_IsBusSuspended();
uint8_t ErrorCode = HOST_WAITERROR_Successful;
bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
USB_INT_Disable(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_HSOFI);
USB_Host_ResumeBus();
while (MS)
{
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
MS--;
}
if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host))
{
ErrorCode = HOST_WAITERROR_DeviceDisconnect;
break;
}
if (Pipe_IsError() == true)
{
Pipe_ClearError();
ErrorCode = HOST_WAITERROR_PipeError;
break;
}
if (Pipe_IsStalled() == true)
{
Pipe_ClearStall();
ErrorCode = HOST_WAITERROR_SetupStalled;
break;
}
}
if (BusSuspended)
USB_Host_SuspendBus();
if (HSOFIEnabled)
USB_INT_Enable(USB_INT_HSOFI);
return ErrorCode;
}
static void USB_Host_ResetDevice(void)
{
bool BusSuspended = USB_Host_IsBusSuspended();
USB_INT_Disable(USB_INT_DDISCI);
USB_Host_ResetBus();
while (!(USB_Host_IsBusResetComplete()));
USB_Host_ResumeBus();
bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
USB_INT_Disable(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_HSOFI);
for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
/* Workaround for powerless-pull-up devices. After a USB bus reset,
all disconnection interrupts are suppressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_DDISCI);
break;
}
_delay_ms(1);
}
if (HSOFIEnabled)
USB_INT_Enable(USB_INT_HSOFI);
if (BusSuspended)
USB_Host_SuspendBus();
USB_INT_Enable(USB_INT_DDISCI);
}