void XAP_UnixDialog_Image::runModal(XAP_Frame * pFrame)
{
// build the dialog
GtkWidget * cf = _constructWindow();
UT_return_if_fail(cf);
setHeightEntry();
setWidthEntry();
double height = UT_convertToInches(getHeightString());
double width = UT_convertToInches(getWidthString());
if((height > 0.0001) && (width > 0.0001))
m_dHeightWidth = height/width;
else
{
m_dHeightWidth = 0.0;
gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (m_wAspectCheck), FALSE);
}
setWrappingGUI();
setPositionToGUI();
wrappingChanged();
switch ( abiRunModalDialog ( GTK_DIALOG(cf), pFrame, this, BUTTON_CANCEL, false ) )
{
case GTK_RESPONSE_OK:
event_Ok (); break;
default:
event_Cancel (); break;
}
abiDestroyWidget (cf);
}
static void _css_length (const char *str,GR_Graphics* pG,
UT_sint32 *iDisplayLength,UT_sint32 *iLayoutLength)
{
UT_sint32 dim = UT_determineDimension(static_cast<const char*>(str), DIM_PX);
if (dim != DIM_PX && dim != DIM_none)
{
if (pG == 0)
{
*iDisplayLength = static_cast<UT_sint32>((UT_convertToInches(str) * 72.0) + 0.05);
}
else
{
*iDisplayLength = UT_convertToLogicalUnits(str);
}
*iLayoutLength = UT_convertToLogicalUnits(str);
}
else
{
double iImageLength = UT_convertDimensionless(str);
double fScale = pG ? (pG->getResolution() / 72.0) : 1;
*iDisplayLength = static_cast<UT_sint32>(iImageLength * fScale);
fScale = 1440.0 / 72.0;
*iLayoutLength = static_cast<UT_sint32>(iImageLength * fScale);
}
}
AP_Win32Dialog_FormatFrame::AP_Win32Dialog_FormatFrame(XAP_DialogFactory * pDlgFactory,
XAP_Dialog_Id id)
: AP_Dialog_FormatFrame(pDlgFactory,id),
m_hBitmapBottom(NULL),
m_hBitmapTop(NULL),
m_hBitmapRight(NULL),
m_hBitmapLeft(NULL),
m_pPreviewWidget(NULL)
{
UT_sint32 i = 0;
for(i=0; i < FORMAT_FRAME_NUMTHICKNESS ;i++)
m_dThickness[i] = UT_convertToInches(sThickness[i]);
}
UT_sint32 UT_paperUnits(const char * sz)
{
// convert string in form "8.5in" into "paper" units.
// paper units are a relatively low-resolution (say
// 1/100 inch) but are suitable for specifying margins,
// etc. -- stuff relative to the actual paper.
if (!sz || !*sz)
return 0;
double dInches = UT_convertToInches(sz);
double dResolution = UT_PAPER_UNITS_PER_INCH;
return static_cast<UT_sint32>(dInches * dResolution);
}
double UT_convertToDimension(const char* s, UT_Dimension dim)
{
double d;
// if needed, switch unit systems and round off
if (UT_determineDimension(s, dim) != dim)
{
double dInches = UT_convertToInches(s);
d = UT_convertInchesToDimension(dInches, dim);
}
else
{
d = UT_convertDimensionless(s);
}
return d;
}
guint AP_Dialog_FormatTable::_findClosestThickness(const char *sthickness) const
{
double thickness = UT_convertToInches(sthickness);
guint i =0;
guint closest = 0;
double dClose = 100000000.;
for(i=0; i<FORMAT_TABLE_NUMTHICKNESS; i++)
{
double diff = thickness - m_dThickness[i];
if(diff < 0)
diff = -diff;
if(diff < dClose)
{
closest = i;
dClose = diff;
}
}
return closest;
}
AP_Dialog_FormatTable::AP_Dialog_FormatTable(XAP_DialogFactory * pDlgFactory, XAP_Dialog_Id id)
: XAP_Dialog_Modeless(pDlgFactory,id, "interface/dialogformattable"),
m_borderColor(0,0,0),
m_lineStyle(LS_NORMAL),
m_bgFillStyle(NULL),
m_answer(a_OK),
m_pFormatTablePreview(NULL),
m_bSettingsChanged(false),
m_pAutoUpdaterMC(NULL),
m_borderToggled(false),
m_ApplyTo(FORMAT_TABLE_SELECTION),
m_bDestroy_says_stopupdating(false),
m_bAutoUpdate_happening_now(false),
m_iOldPos(0),
m_sImagePath(""),
m_iGraphicType(0),
m_pImage(NULL),
m_pGraphic(NULL)
{
//
// These are hardwired into the GUI.
//
const char * sThickness[FORMAT_TABLE_NUMTHICKNESS] = {"0.25pt","0.5pt",
"0.75pt","1.0pt",
"1.5pt","2.25pt","3pt",
"4.5pt","6.0pt"
};
UT_sint32 i = 0;
for(i=0; i< FORMAT_TABLE_NUMTHICKNESS ; i++)
{
m_dThickness[i] = UT_convertToInches(sThickness[i]);
}
if(m_vecProps.getItemCount() > 0)
m_vecProps.clear();
if(m_vecPropsAdjRight.getItemCount() > 0)
m_vecPropsAdjRight.clear();
if(m_vecPropsAdjBottom.getItemCount() > 0)
m_vecPropsAdjBottom.clear();
}
void AP_UnixDialog_FormatFrame::setBorderThicknessInGUI(UT_UTF8String & sThick)
{
double thickness = UT_convertToInches(sThick.utf8_str());
guint i =0;
guint closest = 0;
double dClose = 100000000.;
for(i=0; i<FORMAT_FRAME_NUMTHICKNESS; i++)
{
double diff = thickness - m_dThickness[i];
if(diff < 0)
diff = -diff;
if(diff < dClose)
{
closest = i;
dClose = diff;
}
}
XAP_GtkSignalBlocker b(G_OBJECT(m_wBorderThickness),m_iBorderThicknessConnect);
gtk_combo_box_set_active(GTK_COMBO_BOX(m_wBorderThickness), closest);
}
const char * UT_reformatDimensionString(UT_Dimension dim, const char *sz, const char * szPrecision)
{
UT_ASSERT(sz); // this function segfaults if it gets a null
if (!sz) // if we really need to give it a null, we make it = 0in
{
sz = "0.0in";
UT_DEBUGMSG(("UT_reformatDimensionString just made the assumption null = 0.0in\n"));
}
double d = UT_convertDimensionless(sz);
// if needed, switch unit systems and round off
UT_Dimension dimOld = UT_determineDimension(sz, dim);
if (dimOld != dim)
{
double dInches = UT_convertToInches(sz);
d = UT_convertInchesToDimension(dInches, dim);
}
return UT_formatDimensionString(dim, d, szPrecision);
}
static bool _convertBorderThickness(const char* szIncoming, UT_UTF8String& sConverted)
{
UT_return_val_if_fail(szIncoming && *szIncoming, false);
double d = 0.0f;
UT_Dimension units = UT_determineDimension (szIncoming, DIM_none);
if (units == DIM_none) {
// no (valid) dimension specified, we'll assume inches
d = UT_convertToInches(szIncoming);
d = UT_convertInchesToDimension(d, DIM_PT);
} else {
d = UT_convertToPoints(szIncoming);
}
UT_LocaleTransactor t(LC_NUMERIC, "C");
sConverted = UT_UTF8String_sprintf("%.2fpt", d);
return true;
}
AP_UnixDialog_FormatFrame::AP_UnixDialog_FormatFrame(XAP_DialogFactory * pDlgFactory,
XAP_Dialog_Id id)
: AP_Dialog_FormatFrame(pDlgFactory,id)
{
m_windowMain = NULL;
m_wPreviewArea = NULL;
m_pPreviewWidget = NULL;
m_wApplyButton = NULL;
m_wBorderColorButton = NULL;
m_wLineLeft = NULL;
m_wLineRight = NULL;
m_wLineTop = NULL;
m_wLineBottom = NULL;
m_wSetImageButton = NULL;
m_wSelectImageButton = NULL;
m_wNoImageButton = NULL;
m_wBorderThickness = NULL;
m_iBorderThicknessConnect = 0;
m_wWrapButton = NULL;
m_wPosParagraph = NULL;
m_wPosColumn = NULL;
m_wPosPage = NULL;
//
// These are hardwired into the GUI.
//
const char * sThickness[FORMAT_FRAME_NUMTHICKNESS] ={"0.25pt","0.5pt",
"0.75pt","1.0pt",
"1.5pt","2.25pt","3pt",
"4.5pt","6.0pt"};
UT_sint32 i = 0;
for(i=0; i< FORMAT_FRAME_NUMTHICKNESS ;i++)
{
m_dThickness[i] = UT_convertToInches(sThickness[i]);
}
}
UT_sint32 UT_convertToLogicalUnits(const char* s)
{
return static_cast<UT_sint32>(UT_convertToInches(s) * UT_LAYOUT_RESOLUTION);
}
void ODe_Frame_Listener::_openODTextbox(const PP_AttrProp& rAP,
ODe_ListenerAction& /*rAction*/)
{
UT_UTF8String output;
UT_UTF8String str;
bool ok;
const gchar* pValue = NULL;
ODe_Style_Style* pStyle;
pStyle = new ODe_Style_Style();
pStyle->setFamily("graphic");
pStyle->fetchAttributesFromAbiFrame(rAP);
// Abi frames have no padding
// (no margin between frame borders and its content)
pStyle->setPadding("0cm");
// Abi frames are aways positioned from its top-left corner.
pStyle->setHorizontalPos("from-left");
pStyle->setVerticalPos("from-top");
// For OOo to recognize a textbox as being a textbox, it will
// need to have the parent style name "Frame". I can't find it
// in the ODF spec, but without it OOo considers the textbox to
// be a generic drawing object (check the Navigator window in OOo).
pStyle->setParentStyleName("Frame");
// Make sure an (empty) Frame style exists, for completeness sake
// (OOo doesn't seem to care if it exists or not).
if (!m_rStyles.getGraphicsStyle("Frame")) {
ODe_Style_Style* pFrameStyle = new ODe_Style_Style();
pFrameStyle->setStyleName("Frame");
pFrameStyle->setFamily("graphic");
m_rStyles.addGraphicsStyle(pFrameStyle);
}
m_rAutomatiStyles.storeGraphicStyle(pStyle);
////
// Write <draw:frame>
_printSpacesOffset(output);
output += "<draw:frame";
UT_UTF8String_sprintf(str, "Frame%u", m_rAuxiliaryData.m_frameCount+1);
ODe_writeAttribute(output, "draw:name", str);
m_rAuxiliaryData.m_frameCount++;
ODe_writeAttribute(output, "draw:style-name", pStyle->getName());
UT_UTF8String_sprintf(str, "%u", m_zIndex);
ODe_writeAttribute(output, "draw:z-index", str);
ok = rAP.getProperty("position-to", pValue);
if (pValue && !strcmp(pValue, "block-above-text")) {
ODe_writeAttribute(output, "text:anchor-type", "paragraph");
ok = rAP.getProperty("xpos", pValue);
UT_ASSERT(ok && pValue != NULL);
ODe_writeAttribute(output, "svg:x", pValue);
ok = rAP.getProperty("ypos", pValue);
UT_ASSERT(ok && pValue != NULL);
ODe_writeAttribute(output, "svg:y", pValue);
} else {
// Everything else (column and page) will be treated as page
// anchored.
ODe_writeAttribute(output, "text:anchor-type", "page");
if(pValue && !strcmp(pValue, "column-above-text"))
{
//
// Get the most recent page style so we can do the arithmetic
// Won't work for x in multi-columned docs
//
UT_uint32 numPStyles = m_rAutomatiStyles.getSectionStylesCount();
UT_UTF8String stylePName;
UT_UTF8String_sprintf(stylePName, "PLayout%d", numPStyles + 1);
ODe_Style_PageLayout * pPageL = m_rAutomatiStyles.getPageLayout(stylePName.utf8_str());
ok = rAP.getProperty("frame-col-xpos", pValue);
UT_ASSERT(ok && pValue != NULL);
double xCol = UT_convertToInches(pValue);
const gchar* pSVal= pPageL->getPageMarginLeft();
double xPageL = UT_convertToInches(pSVal);
double xTot = xPageL + xCol;
pValue = UT_convertInchesToDimensionString(DIM_IN,xTot,"4");
ODe_writeAttribute(output, "svg:x", pValue);
ok = rAP.getProperty("frame-col-ypos", pValue);
UT_ASSERT(ok && pValue != NULL);
double yCol = UT_convertToInches(pValue);
pSVal= pPageL->getPageMarginTop();
double yPageL = UT_convertToInches(pSVal);
double yTot = yPageL + yCol;
pValue = UT_convertInchesToDimensionString(DIM_IN,yTot,"4");
ODe_writeAttribute(output, "svg:y", pValue);
}
else
{
ok = rAP.getProperty("frame-page-xpos", pValue);
UT_ASSERT(ok && pValue != NULL);
ODe_writeAttribute(output, "svg:x", pValue);
ok = rAP.getProperty("frame-page-ypos", pValue);
UT_ASSERT(ok && pValue != NULL);
ODe_writeAttribute(output, "svg:y", pValue);
}
}
ok = rAP.getProperty("frame-width", pValue);
if (ok && pValue != NULL) {
ODe_writeAttribute(output, "svg:width", pValue);
}
output += ">\n";
ODe_writeUTF8String(m_pTextOutput, output);
m_spacesOffset++;
////
// Write <draw:text-box>
output.clear();
_printSpacesOffset(output);
output += "<draw:text-box";
ok = rAP.getProperty("frame-height", pValue);
if (ok && pValue != NULL) {
ODe_writeAttribute(output, "fo:min-height", pValue);
}
output += ">\n";
ODe_writeUTF8String(m_pTextOutput, output);
m_spacesOffset++;
}
/*!
* This method reads all the List info from the document at the curent point
* and loads it into the dialog member variables.
*/
void AP_Dialog_Lists::fillDialogFromBlock(void)
{
UT_GenericVector<const gchar*> va,vp;
if (getBlock()->getPreviousList() != NULL)
{
m_previousListExistsAtPoint = true;
}
else
{
m_previousListExistsAtPoint = false;
}
getBlock()->getListAttributesVector( &va);
getBlock()->getListPropertyVector( &vp);
//
// First get the fold level.
//
const PP_AttrProp * pAP = NULL;
getBlock()->getAP(pAP);
const gchar *pszTEXTFOLDED = NULL;
if(!pAP || !pAP->getProperty("text-folded",pszTEXTFOLDED))
{
m_iCurrentLevel = 0;
}
else
{
m_iCurrentLevel = atoi(pszTEXTFOLDED);
}
setFoldLevelInGUI();
//
// First do properties.
//
UT_sint32 i;
if(vp.getItemCount() > 0)
{
i = findVecItem(&vp,"start-value");
if(i >= 0)
{
m_iStartValue = atoi(vp.getNthItem(i+1));
}
else
{
m_iStartValue = 1;
}
i = findVecItem(&vp,"margin-left");
if(i>=0)
{
m_fAlign = (float)UT_convertToInches(vp.getNthItem(i+1));
}
else
{
m_fAlign = (float)LIST_DEFAULT_INDENT;
}
i = findVecItem(&vp,"text-indent");
if(i >= 0)
{
m_fIndent = (float)UT_convertToInches(vp.getNthItem(i+1));
}
else
{
m_fIndent = (float)-LIST_DEFAULT_INDENT_LABEL;
}
//
// OK for list-delim it is better to use what is in fl_AutoNum first then the
// the paraprops then the defaults. The value for fl_AutoNum is what ends up in
// the users doc.
//
i = findVecItem(&vp,"list-delim");
if(getAutoNum())
{
m_pszDelim = getAutoNum()->getDelim();
}
else if(i >=0 )
{
m_pszDelim = vp.getNthItem(i+1);
}
else
{
m_pszDelim = "%L";
}
//
// OK for list-delim it is better to use what is in fl_AutoNum first then the
// the paraprops then the defaults. The value for fl_AutoNum is what ends up in
// the users doc.
//
i = findVecItem(&vp,"list-decimal");
if(getAutoNum())
{
m_pszDecimal = getAutoNum()->getDecimal();
}
else if( i>= 0)
{
m_pszDecimal = vp.getNthItem(i+1);
}
else
{
m_pszDecimal = ".";
}
i = findVecItem(&vp,"field-font");
if( i>= 0)
{
m_pszFont = vp.getNthItem(i+1);
}
else
{
m_pszFont = "NULL";
}
i = findVecItem(&vp,"list-style");
if( i>= 0)
{
m_DocListType = getBlock()->getListTypeFromStyle(vp.getNthItem(i+1));
}
else
{
m_DocListType = NUMBERED_LIST;
}
}
//
// Now Do the Attributes first
//
if(va.getItemCount()>0)
{
// i = findVecItem(&va,PT_STYLE_ATTRIBUTE_NAME);
// if( i>= 0)
// {
// m_DocListType = getBlock()->getListTypeFromStyle( (const gchar *) va.getNthItem(i+1));
// }
// else
// {
// m_DocListType = NUMBERED_LIST;
// }
i = findVecItem(&va,"level");
if( i>= 0)
{
m_iLevel = atoi(va.getNthItem(i+1));
}
else
{
m_iLevel = 1;
}
}
if(getAutoNum() != NULL)
{
m_iID = getAutoNum()->getID();
m_DocListType = getAutoNum()->getType();
m_pszDecimal = getAutoNum()->getDecimal();
}
else
{
m_iID = 0;
m_DocListType = NOT_A_LIST;
}
}
/*!
* The vector vp contains all the properties we need to fill our dialog variables.
* Fill our variables from this vector.
* This is used by the Modal dialog and is filled from the styles dialog.
*/
void AP_Dialog_Lists::fillDialogFromVector( UT_GenericVector<const gchar*> * vp)
{
UT_sint32 i;
if(vp->getItemCount() > 0)
{
i = findVecItem(vp,"start-value");
if(i >= 0)
{
m_iStartValue = atoi(vp->getNthItem(i+1));
}
else
{
m_iStartValue = 1;
}
i = findVecItem(vp,"margin-left");
if(i>=0)
{
m_fAlign = (float)UT_convertToInches(vp->getNthItem(i+1));
}
else
{
m_fAlign = (float)LIST_DEFAULT_INDENT;
}
i = findVecItem(vp,"text-indent");
if(i >= 0)
{
m_fIndent = (float)UT_convertToInches(vp->getNthItem(i+1));
}
else
{
m_fIndent = (float)-LIST_DEFAULT_INDENT_LABEL;
}
i = findVecItem(vp,"list-delim");
if( i>= 0)
{
m_pszDelim = vp->getNthItem(i+1);
}
else
{
m_pszDelim = "%L";
}
i = findVecItem(vp,"list-decimal");
if( i>= 0)
{
m_pszDecimal = vp->getNthItem(i+1);
}
else
{
m_pszDecimal = ".";
}
i = findVecItem(vp,"field-font");
if( i>= 0)
{
m_pszFont = vp->getNthItem(i+1);
}
else
{
m_pszFont = "NULL";
}
i = findVecItem(vp,"list-style");
if( i>= 0)
{
m_DocListType = getBlock()->getListTypeFromStyle(vp->getNthItem(i+1));
m_NewListType = m_DocListType;
}
else
{
m_DocListType = NOT_A_LIST;
m_NewListType = m_DocListType;
}
}
}
void AP_Dialog_Paragraph::_doSpin(tControl edit, UT_sint32 amt)
{
UT_ASSERT_HARMLESS(amt); // zero makes no sense
// get current value from member
const gchar* szOld = _getSpinItemValue(edit);
double d = UT_convertDimensionless(szOld);
// figure out which dimension and units to spin in
UT_Dimension dimSpin = m_dim;
double dSpinUnit = SPIN_INCR_PT;
double dMin = 0.0;
bool bMin = false;
switch (edit)
{
case id_SPIN_SPECIAL_INDENT:
dMin = 0.0;
bMin = true;
// fall through
case id_SPIN_LEFT_INDENT:
case id_SPIN_RIGHT_INDENT:
dimSpin = m_dim;
switch (dimSpin)
{
case DIM_IN: dSpinUnit = SPIN_INCR_IN; break;
case DIM_CM: dSpinUnit = SPIN_INCR_CM; break;
case DIM_PI: dSpinUnit = SPIN_INCR_PI; break;
case DIM_PT: dSpinUnit = SPIN_INCR_PT; break;
default:
UT_ASSERT_HARMLESS(UT_SHOULD_NOT_HAPPEN);
break;
}
break;
case id_SPIN_BEFORE_SPACING:
case id_SPIN_AFTER_SPACING:
dimSpin = DIM_PT;
dSpinUnit = 6.0;
dMin = 0.0;
bMin = true;
break;
case id_SPIN_SPECIAL_SPACING:
switch(_getMenuItemValue(id_MENU_SPECIAL_SPACING))
{
case spacing_SINGLE:
case spacing_ONEANDHALF:
case spacing_DOUBLE:
_setMenuItemValue(id_MENU_SPECIAL_SPACING, spacing_MULTIPLE);
// fall through
case spacing_MULTIPLE:
dimSpin = DIM_none;
dSpinUnit = 0.1;
dMin = 0.5;
bMin = true;
break;
case spacing_EXACTLY:
dMin = 1;
// fall through
case spacing_ATLEAST:
dimSpin = DIM_PT;
dSpinUnit = SPIN_INCR_PT;
bMin = true;
break;
default:
UT_ASSERT_HARMLESS(UT_SHOULD_NOT_HAPPEN);
break;
}
break;
default:
UT_ASSERT_HARMLESS(UT_SHOULD_NOT_HAPPEN);
break;
}
// figure out spin precision, too
const char * szPrecision = ".1";
if ((dimSpin == DIM_PT) ||
(dimSpin == DIM_PI))
szPrecision = ".0";
// if needed, switch unit systems and round off
UT_Dimension dimOld = UT_determineDimension(szOld, dimSpin);
if (dimOld != dimSpin)
{
double dInches = UT_convertToInches(szOld);
d = UT_convertInchesToDimension(dInches, dimSpin);
}
// value is now in desired units, so change it
d += (dSpinUnit * amt);
if (bMin)
{
// some spinners clamp at bottom of range
if (d < dMin)
d = dMin;
}
const gchar* szNew = UT_formatDimensionString(dimSpin, d, szPrecision);
_setSpinItemValue(edit, szNew);
}
bool Text_Listener::populateStrux(PL_StruxDocHandle /*sdh*/,
const PX_ChangeRecord * pcr,
PL_StruxFmtHandle * psfh)
{
UT_return_val_if_fail(pcr->getType() == PX_ChangeRecord::PXT_InsertStrux, false);
const PX_ChangeRecord_Strux * pcrx = static_cast<const PX_ChangeRecord_Strux *>(pcr);
*psfh = 0; // we don't need it.
switch (pcrx->getStruxType())
{
case PTX_SectionEndnote:
case PTX_SectionHdrFtr:
case PTX_Section:
{
_closeBlock();
PT_AttrPropIndex api = pcr->getIndexAP();
const PP_AttrProp * pAP = NULL;
bool bHaveProp = m_pDocument->getAttrProp (api, &pAP);
if (bHaveProp && pAP)
{
const gchar *szValue = NULL;
if(pAP->getProperty("dom-dir", szValue))
{
if(!g_ascii_strcasecmp("rtl",szValue))
{
m_eSectionDir = DO_RTL;
}
else
{
m_eSectionDir = DO_LTR;
}
}
else
{
m_eSectionDir = DO_UNSET;
}
}
return true;
}
case PTX_Block:
{
_closeBlock();
m_bInBlock = true;
const gchar * szValue = NULL;
PT_AttrPropIndex api = pcr->getIndexAP();
const PP_AttrProp * pAP = NULL;
bool bHaveProp = m_pDocument->getAttrProp (api, &pAP);
m_bBreakExtra = false;
if (bHaveProp && pAP)
{
szValue = PP_evalProperty ("margin-top", 0, pAP, 0, m_pDocument, true);
if(szValue)
{
double inches = UT_convertToInches(szValue);
if (!m_bFirstWrite && (inches > 0.01))
m_pie->write(static_cast<const char *>(m_mbLineBreak),m_iLineBreakLen);
}
szValue = PP_evalProperty ("margin-bottom", 0, pAP, 0, m_pDocument, true);
if(szValue)
{
double inches = UT_convertToInches(szValue);
if (inches > 0.01)
m_bBreakExtra = true;
}
}
// in 16-bit encodings we sometimes have to issue LRM or
// RLM to indicate the dominant direction of the block
// (the actual insertion will be done in the subsequent
// call to _outputData(), since most often the marker is
// unnecessary
if(m_bUnicode)
{
if (bHaveProp && pAP)
{
szValue = NULL;
if(pAP->getProperty("dom-dir", szValue))
{
if(!g_ascii_strcasecmp("rtl",szValue))
{
m_eDirMarkerPending = DO_RTL;
}
else
{
m_eDirMarkerPending = DO_LTR;
}
}
else if(m_eSectionDir != DO_UNSET)
{
m_eDirMarkerPending = m_eSectionDir;
}
else
{
m_eDirMarkerPending = m_eDocDir;
}
}
}
return true;
}
// Be nice about these until we figure out what to do with 'em
case PTX_SectionTable:
case PTX_SectionCell:
case PTX_EndTable:
case PTX_EndCell:
case PTX_EndFrame:
case PTX_EndMarginnote:
case PTX_EndFootnote:
case PTX_SectionFrame:
case PTX_SectionMarginnote:
case PTX_SectionFootnote:
case PTX_EndEndnote:
case PTX_SectionTOC:
case PTX_EndTOC:
case PTX_SectionAnnotation:
case PTX_EndAnnotation:
return true ;
default:
UT_ASSERT_HARMLESS(UT_TODO);
return true;
}
}