void RigidBody::CreateBody()
{
if (!impl->world || impl->body || !ParentEntity())
return;
CheckForPlaceableAndTerrain();
CreateCollisionShape();
btVector3 localInertia;
float m;
int collisionFlags;
impl->GetProperties(localInertia, m, collisionFlags);
impl->body = new btRigidBody(m, impl, impl->shape, localInertia);
// TEST: Adjust the threshold of when to sleep the object - for reducing network bandwidth.
// impl->body->setSleepingThresholds(0.2f, 0.5f); // Bullet defaults are 0.8 and 1.0.
impl->body->setUserPointer(this);
impl->body->setCollisionFlags(collisionFlags);
impl->world->BulletWorld()->addRigidBody(impl->body, (short)collisionLayer.Get(), (short)collisionMask.Get());
impl->body->activate();
UpdateGravity();
}
void GPlayer::Step(float dt)
{
CCPoint oldVelocity = velocity;
CCPoint oldPosition = GetPlayerPosition();
CCPoint pos = sprite->getPosition();
pos = pos + velocity;
sprite->setPosition(pos);
if(applyGravity)
velocity = velocity + gravity;
if( oldVelocity.y == 0.0 && velocity.y != 0.0 && state == RUN) {
state = JMP1;
//CCLog("set player state JMP1");
}
//check and set gravity
UpdateGravity();
//velocity and gravity have the same direction
if( (oldPosition.y <= gravity_line_y && pos.y > gravity_line_y) ||
(oldPosition.y > gravity_line_y && pos.y <= gravity_line_y) ) {
SwitchGravity();
JumpDown();
CCLog("flip gravity!");
}else if(oldVelocity.y * velocity.y <= 0.0 && velocity.y * gravity.y > 0.0) {
//CCLog("player's old velocity.y %f new velocity.y %f)", oldVelocity.y, velocity.y);
JumpDown();
}
//CCLog("player step position(%f, %f) velocity(%f, %f) gravity(%f, %f) state %d",
// pos.x, pos.y, velocity.x, velocity.y, gravity.x, gravity.y, state);
}
void RigidBody::SetGravityOverride(const Vector3& gravity)
{
if (gravity != gravityOverride_)
{
gravityOverride_ = gravity;
UpdateGravity();
MarkNetworkUpdate();
}
}
void RigidBody::SetUseGravity(bool enable)
{
if (enable != useGravity_)
{
useGravity_ = enable;
UpdateGravity();
MarkNetworkUpdate();
}
}
void RigidBody::AttributesChanged()
{
if (impl->disconnected)
return;
bool isShapeTriMeshOrConvexHull = (shapeType.Get() == TriMesh || shapeType.Get() == ConvexHull);
bool bodyRead = false;
bool meshRequested = false;
// Create body now if does not exist yet
if (!impl->body)
CreateBody();
// If body was not created (we do not actually have a physics world), exit
if (!impl->body)
return;
if (mass.ValueChanged() || collisionLayer.ValueChanged() || collisionMask.ValueChanged())
{
// Read body to the world in case static/dynamic classification changed, or if collision mask changed
ReaddBody();
bodyRead = true;
}
if (friction.ValueChanged())
impl->body->setFriction(friction.Get());
if (rollingFriction.ValueChanged())
impl->body->setRollingFriction(rollingFriction.Get());
if (restitution.ValueChanged())
impl->body->setRestitution(friction.Get());
if (linearDamping.ValueChanged() || angularDamping.ValueChanged())
impl->body->setDamping(linearDamping.Get(), angularDamping.Get());
if (linearFactor.ValueChanged())
impl->body->setLinearFactor(linearFactor.Get());
if (angularFactor.ValueChanged())
impl->body->setAngularFactor(angularFactor.Get());
if (shapeType.ValueChanged() || size.ValueChanged())
{
if (shapeType.Get() != impl->cachedShapeType || !size.Get().Equals(impl->cachedSize))
{
// If shape does not involve mesh, can create it directly. Otherwise request the mesh
if (!isShapeTriMeshOrConvexHull)
{
CreateCollisionShape();
impl->cachedShapeType = shapeType.Get();
impl->cachedSize = size.Get();
}
// If shape type has changed from TrimMesh <--> ConvexHull refresh the mesh shape.
else if (shapeType.Get() != impl->cachedShapeType)
{
RequestMesh();
meshRequested = true;
}
// If size changed but no reload of mesh shape was done, update its scale.
else if (!size.Get().Equals(impl->cachedSize))
UpdateScale();
}
}
// Request mesh if its id changes
if (collisionMeshRef.ValueChanged() && isShapeTriMeshOrConvexHull && !meshRequested)
RequestMesh();
// Readd body to the world in case phantom or kinematic classification changed
if (!bodyRead && (phantom.ValueChanged() || kinematic.ValueChanged()))
ReaddBody();
if (drawDebug.ValueChanged())
{
bool enable = drawDebug.Get();
if (impl->body)
{
int collisionFlags = impl->body->getCollisionFlags();
if (enable)
collisionFlags &= ~btCollisionObject::CF_DISABLE_VISUALIZE_OBJECT;
else
collisionFlags |= btCollisionObject::CF_DISABLE_VISUALIZE_OBJECT;
impl->body->setCollisionFlags(collisionFlags);
}
// Refresh PhysicsWorld's knowledge of debug-enabled rigidbodies
if (impl->world)
{
if (enable)
impl->world->debugRigidBodies_.Insert(this);
else
impl->world->debugRigidBodies_.Erase(this);
}
}
if (linearVelocity.ValueChanged() && !impl->disconnected)
{
impl->body->setLinearVelocity(linearVelocity.Get());
impl->body->activate();
}
if (angularVelocity.ValueChanged() && !impl->disconnected)
{
impl->body->setAngularVelocity(DegToRad(angularVelocity.Get()));
impl->body->activate();
}
if (useGravity.ValueChanged())
UpdateGravity();
}
//////////////////////////////////////////////////////////////////////////
// NOTE: This function must be thread-safe. Before adding stuff contact MarcoC.
void CVehicleMovementTank::ProcessMovement(const float deltaTime)
{
FUNCTION_PROFILER( gEnv->pSystem, PROFILE_GAME );
m_netActionSync.UpdateObject(this);
CryAutoCriticalSection lk(m_lock);
CVehicleMovementBase::ProcessMovement(deltaTime);
if (!(m_actorId && m_isEnginePowered))
{
IPhysicalEntity* pPhysics = GetPhysics();
if (m_latFriction != 1.3f)
SetLatFriction(1.3f);
if (m_axleFriction != m_axleFrictionMax)
UpdateAxleFriction(0.f, false, deltaTime);
m_action.bHandBrake = 1;
m_action.pedal = 0;
m_action.steer = 0;
pPhysics->Action(&m_action, 1);
return;
}
IPhysicalEntity* pPhysics = GetPhysics();
MARK_UNUSED m_action.clutch;
Matrix34 worldTM( m_PhysPos.q );
worldTM.AddTranslation( m_PhysPos.pos );
const Matrix34 invWTM = worldTM.GetInvertedFast();
Vec3 localVel = invWTM.TransformVector(m_PhysDyn.v);
Vec3 localW = invWTM.TransformVector(m_PhysDyn.w);
float speed = m_PhysDyn.v.len();
float speedRatio = min(1.f, speed/m_maxSpeed);
float actionPedal = abs(m_movementAction.power) > 0.001f ? m_movementAction.power : 0.f;
// tank specific:
// avoid steering input around 0.5 (ask Anton)
float actionSteer = m_movementAction.rotateYaw;
float absSteer = abs(actionSteer);
float steerSpeed = (absSteer < 0.01f && abs(m_currSteer) > 0.01f) ? m_steerSpeedRelax : m_steerSpeed;
if (steerSpeed == 0.f)
{
m_currSteer = (float)sgn(actionSteer);
}
else
{
if (m_movementAction.isAI)
{
m_currSteer = actionSteer;
}
else
{
m_currSteer += min(abs(actionSteer-m_currSteer), deltaTime*steerSpeed) * sgn(actionSteer-m_currSteer);
}
}
Limit(m_currSteer, -m_steerLimit, m_steerLimit);
if (abs(m_currSteer) > 0.0001f)
{
// if steering, apply full throttle to have enough turn power
actionPedal = (float)sgn(actionPedal);
if (actionPedal == 0.f)
{
// allow steering-on-teh-spot only above maxReverseSpeed (to avoid sudden reverse of controls)
const float maxReverseSpeed = -1.5f;
actionPedal = max(0.f, min(1.f, 1.f-(localVel.y/maxReverseSpeed)));
// todo
float steerLim = 0.8f;
Limit(m_currSteer, -steerLim*m_steerLimit, steerLim*m_steerLimit);
}
}
if (!pPhysics->GetStatus(&m_vehicleStatus))
return;
int currGear = m_vehicleStatus.iCurGear - 1; // indexing for convenience: -1,0,1,2,..
UpdateAxleFriction(m_movementAction.power, true, deltaTime);
UpdateSuspension(deltaTime);
float absPedal = abs(actionPedal);
// pedal ramping
if (m_pedalSpeed == 0.f)
m_currPedal = actionPedal;
else
{
m_currPedal += deltaTime * m_pedalSpeed * sgn(actionPedal - m_currPedal);
m_currPedal = clamp_tpl(m_currPedal, -absPedal, absPedal);
}
// only apply pedal after threshold is exceeded
if (currGear == 0 && fabs_tpl(m_currPedal) < m_pedalThreshold)
m_action.pedal = 0;
else
m_action.pedal = m_currPedal;
// change pedal amount based on damages
float damageMul = 0.0f;
{
if (m_movementAction.isAI)
{
damageMul = 1.0f - 0.30f * m_damage;
m_action.pedal *= damageMul;
}
else
{
// request from Sten: damage shouldn't affect reversing so much.
float effectiveDamage = m_damage;
if(m_action.pedal < -0.1f)
effectiveDamage = 0.4f * m_damage;
m_action.pedal *= GetWheelCondition();
damageMul = 1.0f - 0.7f*effectiveDamage;
m_action.pedal *= damageMul;
}
}
// reverse steering value for backward driving
float effSteer = m_currSteer * sgn(actionPedal);
// update lateral friction
float latSlipMinGoal = 0.f;
float latFricMinGoal = m_latFricMin;
if (abs(effSteer) > 0.01f && !m_movementAction.brake)
{
latSlipMinGoal = m_latSlipMin;
// use steering friction, but not when countersteering
if (sgn(effSteer) != sgn(localW.z))
latFricMinGoal = m_latFricMinSteer;
}
Interpolate(m_currentSlipMin, latSlipMinGoal, 3.f, deltaTime);
if (latFricMinGoal < m_currentFricMin)
m_currentFricMin = latFricMinGoal;
else
Interpolate(m_currentFricMin, latFricMinGoal, 3.f, deltaTime);
float fractionSpeed = min(1.f, max(0.f, m_avgLateralSlip-m_currentSlipMin) / (m_latSlipMax-m_currentSlipMin));
float latFric = fractionSpeed * (m_latFricMax-m_currentFricMin) + m_currentFricMin;
if ( m_movementAction.brake && m_movementAction.isAI )
{
// it is natural for ai, apply differnt friction value while handbreaking
latFric = m_latFricMax;
}
if (latFric != m_latFriction)
{
SetLatFriction(latFric);
}
const static float maxSteer = gf_PI/4.f; // fix maxsteer, shouldn't change
m_action.steer = m_currSteer * maxSteer;
if (m_steeringImpulseMin > 0.f && m_wheelContactsLeft != 0 && m_wheelContactsRight != 0)
{
const float maxW = 0.3f*gf_PI;
float steer = abs(m_currSteer)>0.001f ? m_currSteer : 0.f;
float desired = steer * maxW;
float curr = -localW.z;
float err = desired - curr; // err>0 means correction to right
Limit(err, -maxW, maxW);
if (abs(err) > 0.01f)
{
float amount = m_steeringImpulseMin + speedRatio*(m_steeringImpulseMax-m_steeringImpulseMin);
// bigger correction for relaxing
if (desired == 0.f || (desired*curr>0 && abs(desired)<abs(curr)))
amount = m_steeringImpulseRelaxMin + speedRatio*(m_steeringImpulseRelaxMax-m_steeringImpulseRelaxMin);
float corr = -err * amount * m_PhysDyn.mass * deltaTime;
pe_action_impulse imp;
imp.iApplyTime = 0;
imp.angImpulse = worldTM.GetColumn2() * corr;
pPhysics->Action(&imp, THREAD_SAFE);
}
}
m_action.bHandBrake = (m_movementAction.brake) ? 1 : 0;
if (currGear > 0 && m_vehicleStatus.iCurGear < m_currentGear)
{
// when shifted down, disengage clutch immediately to avoid power/speed dropdown
m_action.clutch = 1.f;
}
pPhysics->Action(&m_action, 1);
if (Boosting())
ApplyBoost(speed, 1.2f*m_maxSpeed*GetWheelCondition()*damageMul, m_boostStrength, deltaTime);
if (m_wheelContacts <= 1 && speed > 5.f)
{
ApplyAirDamp(DEG2RAD(20.f), DEG2RAD(10.f), deltaTime, THREAD_SAFE);
UpdateGravity(-9.81f * 1.4f);
}
if (m_netActionSync.PublishActions( CNetworkMovementStdWheeled(this) ))
CHANGED_NETWORK_STATE(m_pVehicle, eEA_GameClientDynamic );
}
void RigidBody::AddBodyToWorld()
{
if (!physicsWorld_)
return;
URHO3D_PROFILE(AddBodyToWorld);
if (mass_ < 0.0f)
mass_ = 0.0f;
if (body_)
RemoveBodyFromWorld();
else
{
// Correct inertia will be calculated below
btVector3 localInertia(0.0f, 0.0f, 0.0f);
body_ = new btRigidBody(mass_, this, shiftedCompoundShape_, localInertia);
body_->setUserPointer(this);
// Check for existence of the SmoothedTransform component, which should be created by now in network client mode.
// If it exists, subscribe to its change events
smoothedTransform_ = GetComponent<SmoothedTransform>();
if (smoothedTransform_)
{
SubscribeToEvent(smoothedTransform_, E_TARGETPOSITION, URHO3D_HANDLER(RigidBody, HandleTargetPosition));
SubscribeToEvent(smoothedTransform_, E_TARGETROTATION, URHO3D_HANDLER(RigidBody, HandleTargetRotation));
}
// Check if CollisionShapes already exist in the node and add them to the compound shape.
// Do not update mass yet, but do it once all shapes have been added
PODVector<CollisionShape*> shapes;
node_->GetComponents<CollisionShape>(shapes);
for (PODVector<CollisionShape*>::Iterator i = shapes.Begin(); i != shapes.End(); ++i)
(*i)->NotifyRigidBody(false);
// Check if this node contains Constraint components that were waiting for the rigid body to be created, and signal them
// to create themselves now
PODVector<Constraint*> constraints;
node_->GetComponents<Constraint>(constraints);
for (PODVector<Constraint*>::Iterator i = constraints.Begin(); i != constraints.End(); ++i)
(*i)->CreateConstraint();
}
UpdateMass();
UpdateGravity();
int flags = body_->getCollisionFlags();
if (trigger_)
flags |= btCollisionObject::CF_NO_CONTACT_RESPONSE;
else
flags &= ~btCollisionObject::CF_NO_CONTACT_RESPONSE;
if (kinematic_)
flags |= btCollisionObject::CF_KINEMATIC_OBJECT;
else
flags &= ~btCollisionObject::CF_KINEMATIC_OBJECT;
body_->setCollisionFlags(flags);
body_->forceActivationState(kinematic_ ? DISABLE_DEACTIVATION : ISLAND_SLEEPING);
if (!IsEnabledEffective())
return;
btDiscreteDynamicsWorld* world = physicsWorld_->GetWorld();
world->addRigidBody(body_, (short)collisionLayer_, (short)collisionMask_);
inWorld_ = true;
readdBody_ = false;
if (mass_ > 0.0f)
Activate();
else
{
SetLinearVelocity(Vector3::ZERO);
SetAngularVelocity(Vector3::ZERO);
}
}