/* Attention! This function returns a static string. */
static const char *
pil_str (vbi_pil pil)
{
static char buffer[32];
switch (pil) {
case VBI_PIL_TIMER_CONTROL:
return "TC";
case VBI_PIL_INHIBIT_TERMINATE:
return "RI/T";
case VBI_PIL_INTERRUPTION:
return "INT";
case VBI_PIL_CONTINUE:
return "CONT";
case VBI_PIL_NSPV:
return "NSPV/END";
default:
snprintf (buffer, sizeof (buffer),
"%02u%02uT%02u%02u",
VBI_PIL_MONTH (pil),
VBI_PIL_DAY (pil),
VBI_PIL_HOUR (pil),
VBI_PIL_MINUTE (pil));
return buffer;
}
}
static vbi_bool
valid_pil_lto_validity_window (time_t * begin,
time_t * end,
vbi_pil pil,
time_t start,
int seconds_east)
{
time_t t;
t = valid_pil_lto_to_time (pil & VBI_PIL (/* month */ 15,
/* day */ 31,
/* hour */ 0,
/* minute */ 0),
start, seconds_east);
if (unlikely ((time_t) -1 == t)) {
if (VBI_ERR_INVALID_PIL == errno) {
/* Annex F: "Invalid days -
indefinite time window". */
*begin = TIME_MIN;
*end = TIME_MAX;
return TRUE;
} else {
return FALSE;
}
}
/* EN 300 231 Section 9.3. */
/* Just adding a number of seconds is safe because UTC does
not observe DST and POSIX time_t does not count leap
seconds. The results are unambiguous because leap seconds
are inserted or removed just before midnight and we only
return full hours. */
if (unlikely (t > TIME_MAX - 28 * 60 * 60)) {
errno = EOVERFLOW;
return FALSE;
}
if (VBI_PIL_HOUR (pil) < 4) {
if (unlikely (t < 4 * 60 * 60)) {
errno = EOVERFLOW;
return FALSE;
}
*begin = t - 4 * 60 * 60;
} else {
*begin = t;
}
*end = t + 28 * 60 * 60;
return TRUE;
}
/**
* @param pil Program Identification Label.
*
* Determines if @a pil represents a valid date and time.
*
* Since PILs have no year field February 29th is considered valid.
* You can find out if this date is valid in a given year with the
* vbi_pil_to_time() function.
*
* 24:00 is not valid (an unreal hour) as defined in EN 300 231
* Annex F and EIA 608-B Section 9.5.1.1.
*
* @returns
* @c TRUE if @a pil represents a valid date and time, @c FALSE
* if @a pil contains an unreal date or time (e.g. Jan 0 27:61),
* a service code or unallocated code.
*
* @since 0.2.34
*/
vbi_bool
vbi_pil_is_valid_date (vbi_pil pil)
{
unsigned int month;
unsigned int day;
month = VBI_PIL_MONTH (pil);
day = VBI_PIL_DAY (pil);
/* Note this also checks for zero month and day. */
return (month - 1 < 12
&& day - 1 < month_days[month - 1]
&& VBI_PIL_HOUR (pil) < 24
&& VBI_PIL_MINUTE (pil) < 60);
}
/**
* @internal
* @param pil vbi_pil to print.
* @param fp Destination stream.
*
* Prints a vbi_pil as service code or date and time string without
* trailing newline. This is intended for debugging.
*/
void
_vbi_pil_dump (vbi_pil pil,
FILE * fp)
{
switch (pil) {
case VBI_PIL_TIMER_CONTROL:
fputs ("TC", fp);
break;
case VBI_PIL_INHIBIT_TERMINATE:
fputs ("RI/T", fp);
break;
case VBI_PIL_INTERRUPTION:
fputs ("INT", fp);
break;
case VBI_PIL_CONTINUE:
fputs ("CONT", fp);
break;
case VBI_PIL_NSPV:
/* VBI_PIL_NSPV (PDC) == VBI_PIL_END (XDS) */
fputs ("NSPV/END", fp);
break;
default:
fprintf (fp, "%05x (%02u-%02u %02u:%02u)",
pil,
VBI_PIL_MONTH (pil),
VBI_PIL_DAY (pil),
VBI_PIL_HOUR (pil),
VBI_PIL_MINUTE (pil));
break;
}
}
/**
* @param pil Program Identification Label (PIL) to convert.
* @param start The most recently announced start time of the
* program. If zero the current system time will be used.
* @param tz A time zone name in the same format as the TZ environment
* variable. If @c NULL the current value of TZ will be used.
*
* This function converts a PIL to a time_t in the same manner
* localtime() converts a broken-down time to time_t.
*
* Since PILs do not contain a year field, the year is determined from
* the @a start parameter, that is the most recently announced start
* time of the program or "AT-1" in EN 300 231 parlance. If @a pil
* contains a month more than five months after @a start, @a pil is
* assumed to refer to an earlier date than @a start.
*
* @a pil is assumed to be a time in the time zone @a tz. @a start
* will be converted to a local time in the same time zone to
* determine the correct year.
*
* Teletext packet 8/30 format 2, VPS and DVB PDC descriptors give a
* PIL relative to the time zone of the intended audience of the
* program. Ideally the time zone would be specified as a geographic
* area like "Europe/London", such that the function can determine
* the correct offset from UTC and if daylight-saving time is in
* effect at the specified date. See the documentation of the
* localtime() function and the TZ environment variable for details.
*
* XDS Current/Future Program ID packets give a PIL relative to UTC.
* Just specify time zone "UTC" in this case.
*
* @returns
* The PIL as a time_t, that is the number of seconds since
* 1970-01-01 00:00 UTC. On error the function
* returns (time_t) -1:
* - @a pil does not contain a valid date or time. February 29th is
* a valid date only if the estimated year is a leap year.
* - @a tz is empty or contains an equal sign '='.
* - @a start is zero and the current system time could not be
* determined.
* - The time specified by @a pil, @a start and @a tz cannot be
* represented as a time_t value.
* - Insufficient memory was available.
*
* @since 0.2.34
*
* @bug
* This function is not thread safe unless @a tz is @c NULL. That is
* a limitation of the C library which permits the conversion of a
* broken-down time in an arbitrary time zone only by setting the TZ
* environment variable. The function may also fail to restore the
* value of TZ if insufficient memory is available.
*/
time_t
vbi_pil_to_time (vbi_pil pil,
time_t start,
const char * tz)
{
struct tm tm;
char *old_tz;
time_t result;
int saved_errno;
if (unlikely (!vbi_pil_is_valid_date (pil))) {
#if 3 == VBI_VERSION_MINOR
errno = VBI_ERR_INVALID_PIL;
#else
errno = 0;
#endif
return (time_t) -1;
}
if (NULL != tz && 0 == strcmp (tz, "UTC")) {
time_t t;
t = valid_pil_lto_to_time (pil, start,
/* seconds_east */ 0);
#if 2 == VBI_VERSION_MINOR
errno = 0;
#endif
return t;
}
if (unlikely (!localtime_tz (&tm, &old_tz, start, tz))) {
#if 2 == VBI_VERSION_MINOR
errno = 0;
#endif
return (time_t) -1;
}
if (unlikely (!tm_mon_mday_from_pil (&tm, pil))) {
saved_errno = EOVERFLOW;
goto failed;
}
if (unlikely (!tm_leap_day_check (&tm))) {
saved_errno = VBI_ERR_INVALID_PIL;
goto failed;
}
tm.tm_hour = VBI_PIL_HOUR (pil);
tm.tm_min = VBI_PIL_MINUTE (pil);
tm.tm_sec = 0;
tm.tm_isdst = -1; /* unknown */
result = mktime (&tm);
if (unlikely ((time_t) -1 == result))
goto failed;
if (unlikely (!restore_tz (&old_tz, tz))) {
#if 2 == VBI_VERSION_MINOR
errno = 0;
#endif
return (time_t) -1;
}
return result;
failed:
if (unlikely (!restore_tz (&old_tz, tz))) {
#if 2 == VBI_VERSION_MINOR
errno = 0;
#endif
return (time_t) -1;
}
#if 3 == VBI_VERSION_MINOR
errno = saved_errno;
#else
errno = 0;
#endif
return (time_t) -1;
}
static time_t
valid_pil_lto_to_time (vbi_pil pil,
time_t start,
int seconds_east)
{
struct tm tm;
/* Some system calls below may not set errno on failure, but
we must distinguish those errors from VBI_ERR_INVALID_PIL
for valid_pil_lto_validity_window(). */
errno = 0;
CLEAR (tm);
if ((time_t) -1 == start) {
if (unlikely ((time_t) -1 == time (&start))) {
/* time() can fail but POSIX defines no
error code. On Linux EFAULT is possible. */
if (0 == errno)
errno = VBI_ERR_NO_TIME;
return (time_t) -1;
}
}
if (seconds_east < 0) {
/* Note start can be negative. */
if (unlikely (start < -seconds_east)) {
errno = EOVERFLOW;
return (time_t) -1;
}
} else {
if (unlikely (start > TIME_MAX - seconds_east)) {
errno = EOVERFLOW;
return (time_t) -1;
}
}
start += seconds_east;
if (unlikely (NULL == gmtime_r (&start, &tm)))
return (time_t) -1;
if (unlikely (!tm_mon_mday_from_pil (&tm, pil))) {
errno = EOVERFLOW;
return (time_t) -1;
}
if (unlikely (!tm_leap_day_check (&tm))) {
errno = VBI_ERR_INVALID_PIL;
return (time_t) -1;
}
tm.tm_hour = VBI_PIL_HOUR (pil);
tm.tm_min = VBI_PIL_MINUTE (pil);
tm.tm_sec = 0;
start = timegm (&tm);
if (unlikely ((time_t) -1 == start))
return (time_t) -1;
if (seconds_east > 0) {
/* Note start can be negative. */
if (unlikely (start < seconds_east)) {
errno = EOVERFLOW;
return (time_t) -1;
}
} else {
if (unlikely (start > TIME_MAX + seconds_east)) {
errno = EOVERFLOW;
return (time_t) -1;
}
}
return start - seconds_east;
}
static vbi_bool
valid_pil_validity_window (time_t * begin,
time_t * end,
vbi_pil pil,
time_t start,
const char * tz)
{
char *old_tz;
struct tm tm;
struct tm tm2;
time_t stop;
int saved_errno;
/* EN 300 231 Section 9.3 and Annex F. */
old_tz = NULL;
if (NULL != tz && 0 == strcmp (tz, "UTC")) {
return valid_pil_lto_validity_window
(begin, end, pil, start, /* seconds_east */ 0);
}
if (unlikely (!localtime_tz (&tm, &old_tz, start, tz)))
return FALSE;
if (unlikely (!tm_mon_mday_from_pil (&tm, pil))) {
saved_errno = EOVERFLOW;
goto failed;
}
if (unlikely (!tm_leap_day_check (&tm))) {
/* Annex F: "Invalid days - indefinite time window". */
if (!restore_tz (&old_tz, tz))
return FALSE;
*begin = TIME_MIN;
*end = TIME_MAX;
return TRUE;
}
tm.tm_hour = 0;
tm.tm_min = 0;
tm.tm_sec = 0;
tm.tm_isdst = -1; /* unknown */
tm2 = tm;
if (VBI_PIL_HOUR (pil) < 4) {
--tm.tm_mday;
tm.tm_hour = 20;
}
start = mktime (&tm);
if (unlikely ((time_t) -1 == start))
goto failed;
tm2.tm_mday += 1;
tm2.tm_hour = 4;
stop = mktime (&tm2);
if (unlikely ((time_t) -1 == stop))
goto failed;
if (unlikely (!restore_tz (&old_tz, tz)))
return FALSE;
*begin = start;
*end = stop;
return TRUE;
failed:
if (unlikely (!restore_tz (&old_tz, tz)))
return FALSE;
errno = saved_errno;
return FALSE;
}
