void L298MotorShield::Motor2Backward(int speed)
{
DCMotorParameters parameters = motor2.GetParameters();
WritePort(parameters.PortA, 0);
WritePort(parameters.PortB, speed);
};
void L298MotorShield::Motor2Break()
{
DCMotorParameters parameters = motor2.GetParameters();
WritePort(parameters.PortA, 0);
WritePort(parameters.PortB, 0);
};
bool CPeripherals::FloodLight(unsigned int FloodLightNumber, bool State)
{
DWORD numBytesWritten = 0;
if(State)
{
switch(FloodLightNumber)
{
case 0:
TRACE("Flood Light 1 Activated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Flood Light 1 Activated.");
m_pOwner->UpdateData(true);
WritePort(&m_activateFloodlights, 1, numBytesWritten);
break;
case 1:
TRACE("Flood Light 2 Activated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Flood Light 2 Activated.");
m_pOwner->UpdateData(true);
WritePort(&m_activateFloodlights, 1, numBytesWritten);
break;
}
}
else
{
switch(FloodLightNumber)
{
case 0:
TRACE("Flood Light 1 Deactivated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Flood Light 1 Deactivated.");
m_pOwner->UpdateData(true);
WritePort(&m_deactivateFloodlights, 1, numBytesWritten);
break;
case 1:
TRACE("Flood Light 2 Deactivated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Flood Light 2 Deactivated.");
m_pOwner->UpdateData(true);
WritePort(&m_deactivateFloodlights, 1, numBytesWritten);
break;
}
}
return true;
}
bool CPeripherals::Siren(unsigned int SirenNumber, bool State)
{
DWORD numBytesWritten = 0;
if(State)
{
switch(SirenNumber)
{
case 0:
TRACE("Siren 1 Activated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Siren 1 Activated.");
m_pOwner->UpdateData(true);
WritePort(&m_activateSirens, 1, numBytesWritten);
break;
case 1:
TRACE("Siren 2 Activated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Siren 2 Activated.");
m_pOwner->UpdateData(true);
WritePort(&m_activateSirens, 1, numBytesWritten);
break;
}
}
else
{
switch(SirenNumber)
{
case 0:
TRACE("Siren 1 Deactivated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Siren 1 Deactivated.");
m_pOwner->UpdateData(true);
WritePort(&m_deactivateSirens, 1, numBytesWritten);
break;
case 1:
TRACE("Siren 2 Deactivated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Siren 2 Deactivated.");
m_pOwner->UpdateData(true);
WritePort(&m_deactivateSirens, 1, numBytesWritten);
break;
}
}
return true;
}
int CSerialPort::InitPort(CString strComName)
{
hSerialPort = OpenPort(strComName, CBR_9600,NOPARITY,8, ONESTOPBIT);
if(hSerialPort==NULL)
{
//MessageBox(NULL, "打开指定串口失败，请重新选择串口。","失败", MB_OK|MB_ICONWARNING);
return -1;
}
CString cmd = "AT+CSCA?\r";
char ans[128] ;
WritePort(cmd.GetBuffer(0),strlen(cmd));
Sleep(ShortSleepTime);
ReadPort(ans,128);
CString ansStr = ans;
int cou;
if((cou=ansStr.Find("+86")) != -1)
{
m_SmsCenterNum = ansStr.Mid(cou+1,13);
}
else
{
return -2;
}
return 0;
}
//
// Процедура обрабатывает нажатие кнопки "Вкл.(1)".
//
void Window::bn_switch_on_Clicked()
{
// Найти запись базы данных, соответствующую выбранному элементу
// и поместить в sdb.
int key = h_ListItem2index[m_SelectedItem];
struct s_sdb_recode *sdb = hash_sdb_recode[key];
int port = sdb->O_PORT_ADAM;
int addr = sdb->O_ADR_ADAM;
int nr = sdb->O_NR_ADAM;
qDebug() << "Вкл.(1) " << m_SelectedItem->text()
<< " ADAM PORT=" << port
<< "ADR=" << addr
<< "NR=" << nr;
int state=WritePort( port, addr, nr, 1 );
if ( state!=0) {
qDebug() << "Bad";
messbox("Ошибка записи");
lwg->setFocus( Qt::TabFocusReason ); // Установить фокус на список.
return;
}
else qDebug() << "Ok";
lwg->setFocus( Qt::TabFocusReason ); // Установить фокус на список.
}
/*!
@brief put a char to driver, blocking mode.
*/
void PutChar_proc(struct _SerialPort *thisport, unsigned char* byte)
{
int res, tmp;
while ( (res = WritePort(thisport->m_fd, byte, 1, &tmp)) != SUCCESS) ;
return;
}
/////////////////////////////////////////////////////////////////////////////////
// 函数：gsmReadMessage //
// 说明：读取短消息，用+CMGL代替+CMGR，可一次性读出全部短消息 //
// 参数： //
// pMsg: 短消息缓冲区，必须足够大 //
// 返回: 短消息条数 //
/////////////////////////////////////////////////////////////////////////////////
int CSerialPort::gsmReadMessage(SM_PARAM* pMsg)
{
int nLength; // 串口收到的数据长度
int nMsg; // 短消息计数值
char* ptr; // 内部用的数据指针
char *ptr1;
char cmd[16]; // 命令串
char ans[1024]; // 应答串
nMsg = 0;
ptr = ans;
sprintf(cmd, "AT+CMGR=1\r"); // 生成命令
WritePort(cmd, strlen(cmd)); // 输出命令串
Sleep(ShortSleepTime);
nLength = ReadPort(ans, 1024); // 读应答数据
// 根据能否找到"+CMS ERROR"决定成功与否
ans[nLength]='\0';
if(nLength > 0 && strncmp(ans, "+CMGR:", 6) != 0)
{
// 循环读取每一条短消息, 以"+CMGL:"开头
pMsg->index=1;
ptr = strstr(ans, "\r\n089168");
ptr += 2; // 跳过"\r\n"
ptr1=ptr;
for(int ii=0;;ii++)
{
ptr1=ptr1+1;
if(*ptr1=='\r'&&*(ptr1+1)=='\n'&&*(ptr1+2)=='\r'&&*(ptr1+3)=='\n')
{
*ptr1=0x0;
break;
}
}
gsmDecodePdu(ptr, pMsg); // PDU串解码
nMsg++; // 短消息计数加1
}
sprintf(cmd, "AT+CMGD=1,4\r"); // 生成命令
WritePort(cmd, strlen(cmd)); // 输出命令串
Sleep(ShortSleepTime);
return nMsg;
}
int main()
{
OpenTVicPort();
WritePort(0x2050,0x00);
CloseTVicPort();
return(0);
}
void BinaryCount(int num)
{
for (int i=0; i<=num; i++)
{
WritePort(++valueOutput[0]);
// DisplayPort(i);
wait(gSpeed);
}
}
/////////////////////////////////////////////////////////////////////////////////
// 函数：gsmSendMessage //
// 说明：发送短消息 //
// 参数： //
// pSrc: 源PDU参数指针 //
/////////////////////////////////////////////////////////////////////////////////
bool CSerialPort::gsmSendMessage(const SM_PARAM* pSrc)
{
int nPduLength; // PDU串长度
unsigned char nSmscLength; // SMSC串长度
int nLength; // 串口收到的数据长度
char cmd[16]; // 命令串
char pdu[512]; // PDU串
char ans[128]; // 应答串
nPduLength = gsmEncodePdu(pSrc, pdu); // 根据PDU参数，编码PDU串
strcat(pdu, "\x01a"); // 以Ctrl-Z结束
gsmString2Bytes(pdu, &nSmscLength, 2); // 取PDU串中的SMSC信息长度
nSmscLength++; // 加上长度字节本身
// 命令中的长度，不包括SMSC信息长度，以数据字节计
sprintf(cmd, "AT+CMGS=%d\r", nPduLength / 2 - nSmscLength); // 生成命令
printf(cmd);
WritePort(cmd, strlen(cmd)); // 先输出命令串
Sleep(ShortSleepTime);
WritePort(pdu, strlen(pdu));
WritePort("\x1A", 1);
nLength = ReadPort(ans, 128); // 读应答数据
Sleep(ShortSleepTime);
// 根据能否找到"\r\n> "决定成功与否
/* if(nLength == 4 && strncmp(ans, "\r\n> ", 4) == 0)
{
WritePort(pdu, strlen(pdu));
Sleep(ShortSleepTime);// 得到肯定回答，继续输出PDU串
nLength = ReadPort(ans, 128); // 读应答数据
// 根据能否找到"+CMS ERROR"决定成功与否
if(nLength > 0 && strncmp(ans, "+CMS ERROR", 10) != 0)
{
nLength = ReadPort(ans, 128); // 读应答数据
return FALSE;
}
}*/
return TRUE;
}
int getResult(struct sserial_props *pProps, const char *pCmd, char *pResponse, int nRespLength) {
WritePort(pProps, (void*)pCmd, strlen(pCmd));
int nLength = readLine(pProps, pResponse, nRespLength);
if (nLength > 4) {
// Cut out CRLF at the end of buffer
pResponse[nLength - 2] = '\0';
size_t nOffset = strchr(pResponse,':') - pResponse + 1;
LOGV("Response: \"%s\", Payload: \"%s\", Offset: %ld", pResponse, pResponse + nOffset, nOffset);
strcpy(pResponse, pResponse + nOffset);
return strlen(pResponse);
}
return 0;
}
bool CPeripherals::Buzzer_LED(bool State)
{
DWORD numBytesWritten = 0;
if(State)
{
TRACE("Buzzer & LED Activated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Buzzer & LED Activated.");
m_pOwner->UpdateData(true);
WritePort(&m_activateBuzzerLed, 1, numBytesWritten);
}
else
{
TRACE("Buzzer & LED Deactivated\n");
m_pOwner->SystemInfo.SetWindowText("");
m_pOwner->SystemInfo.SetWindowText("Buzzer & LED Deactivated.");
m_pOwner->UpdateData(true);
WritePort(&m_deactivateBuzzerLed, 1, numBytesWritten);
}
return true;
}
int WriteJob(PORTHANDLE hPort,LPCVOID lpvBuf,int cbBufLen,LPINT lpcbWrite)
{
PSPCB pSPCB;
int rv;
TRACE0(TEXT("--WriteJob\r\n"));
if (!ValidHandle(hPort))
{
return(QP_BAD_PARAMETER);
}
pSPCB = &SPCBTable[hPort];
rv = (int) WritePort(lpvBuf,cbBufLen,lpcbWrite,pSPCB);
TRACE3(TEXT("--Poll@%8u,Last = %8u,Curr = %8u\r\n"),PollRate,pSPCB->nTimeAtLastPoll,
GetTickCount());
// read device status ?
if (pSPCB->bTwoWay)
{
if (PollRate != 0 && GetTickCount() - pSPCB->nTimeAtLastPoll > PollRate)
{
PJLGetMessage(pSPCB,NULL,NULL);
pSPCB->nTimeAtLastPoll = GetTickCount();
}
else
TRACE1(TEXT("--WriteJob: Skip Poll %s\r\n"),pSPCB->szPortName);
}
#ifndef WIN32
switch (rv)
{
case RC_SUCCESS:
rv = QP_PORT_OK;
break;
case RC_CE_PTO:
rv = QP_PORT_BUSY;
break;
default:
rv = QP_PORT_ERROR;
break;
}
#endif
return(rv);
}
void TxPacket1(int port_num)
{
int _idx;
UINT8_T _checksum = 0;
UINT8_T _total_packet_length = packetData[port_num].txpacket_[PKT_LENGTH] + 4; // 4: HEADER0 HEADER1 ID LENGTH
UINT8_T _written_packet_length = 0;
if (is_using_[port_num])
{
packetData[port_num].communication_result_ = COMM_PORT_BUSY;
return ;
}
is_using_[port_num] = true;
// check max packet length
if (_total_packet_length > TXPACKET_MAX_LEN)
{
is_using_[port_num] = false;
packetData[port_num].communication_result_ = COMM_TX_ERROR;
return;
}
// make packet header
packetData[port_num].txpacket_[PKT_HEADER0] = 0xFF;
packetData[port_num].txpacket_[PKT_HEADER1] = 0xFF;
// add a checksum to the packet
for (_idx = 2; _idx < _total_packet_length - 1; _idx++) // except header, checksum
_checksum += packetData[port_num].txpacket_[_idx];
packetData[port_num].txpacket_[_total_packet_length - 1] = ~_checksum;
// tx packet
ClearPort(port_num);
_written_packet_length = WritePort(port_num, packetData[port_num].txpacket_, _total_packet_length);
if (_total_packet_length != _written_packet_length)
{
is_using_[port_num] = false;
packetData[port_num].communication_result_ = COMM_TX_FAIL;
return;
}
packetData[port_num].communication_result_ = COMM_SUCCESS;
}
/////////////////////////////////////////////////////////////////////////////////
// 函数：gsmDeleteMessage //
// 说明：删除短消息 //
// 参数： //
// index: 短消息序号，从1开始 //
/////////////////////////////////////////////////////////////////////////////////
bool CSerialPort::gsmDeleteMessage(const int index)
{
int nLength; // 串口收到的数据长度
char cmd[16]; // 命令串
char ans[128]; // 应答串
sprintf(cmd, "AT+CMGD=%d\r", index); // 生成命令
// 输出命令串
WritePort(cmd, strlen(cmd));
// 读应答数据
nLength = ReadPort(ans, 128);
// 根据能否找到"+CMS ERROR"决定成功与否
if(nLength > 0 && strncmp(ans, "+CMS ERROR", 10) != 0)
{
return TRUE;
}
return FALSE;
}
void Chase(int speed, int startbit, int stopbit)
{
int value = 0;
if(startbit > stopbit) { // CHASE DOWN
//value = 2^(startbit); //128;
switch(startbit) {
case 7: value = 128; break;
case 3: value =8; break;
default: value =1;
}
for (int i=startbit; i>=stopbit; i--)
{
//gotoxy(10, 10+i);
//printf("start=%d stop=%d, i=%d, value=%d",startbit,stopbit,i,value);
WritePort(value);
value >>= 1;
wait(speed);
}
}
else
{ // Chase Up
switch(startbit) {
void OutputBit(int bit,int val)
{
// calculate mask return
int mask = 0;
for(int i=0; i<=bit; i++)
{
mask = mask * 2+1; //almost works
}
mask++;
mask=mask/2;
locate(25,1);
cprintf("bit=%d mask=%d val=%d",bit,mask,val);
switch (val)
{
case 2: // toggle output bit
{
valueOutput[0] = valueOutput[0] ^ mask;
}
break;
case 1: // turn BIT ON
{
valueOutput[0] = valueOutput[0] ^ mask;
}
break;
case 0: // turn BIT OFF
{
mask = ~mask;
valueOutput[0] = valueOutput[0] ^ mask;
}
break;
}
WritePort(valueOutput[0]);
}
//
// Процедура обрабатывает нажатие кнопки "Откл.(0)".
//
void Window::bn_switch_off_Clicked()
{
int key = h_ListItem2index[m_SelectedItem];
struct s_sdb_recode *sdb = hash_sdb_recode[key];
int port = sdb->O_PORT_ADAM;
int addr = sdb->O_ADR_ADAM;
int nr = sdb->O_NR_ADAM;
qDebug() << "Откл.(0) " << m_SelectedItem->text()
<< " ADAM PORT=" << port
<< "ADR=" << addr
<< "NR=" << nr;
int state=WritePort( port, addr, nr, 0 );
if ( state!=0) {
qDebug() << "Bad";
messbox("Ошибка записи");
lwg->setFocus( Qt::TabFocusReason ); // Установить фокус на список.
return;
}
else qDebug() << "Ok";
lwg->setFocus( Qt::TabFocusReason ); // Установить фокус на список.
}
int main(void)
{
char *currenttime; /* current time/date string */
int old_sec = 0;
// int cur_hour = 0; /* current hour */
// int cur_day = 0; /* current current day */
int result = 0;
int key = 0;
Initialise(); // turn outputs on and off for 1 second
InitDisplay();
int keepgoing = 1; /* tells program to keep running until ESC pressed */
while ( keepgoing == 1 )
{
currenttime = thetime(); /* get the current time */
cur_sec = extract_num(currenttime, 18, 2); /* extract minute */
cur_min = extract_num(currenttime, 15, 2); /* extract minute */
cur_hour = extract_num(currenttime, 12,2); /* extract hour */
//cur_day = extract_num(currenttime, 9, 2); /* extract day */
if(old_sec != cur_sec) { /* only update screen once per second */
ReadAnalogInputs(3);
DisplayAnalogValues(3);
ReadDigitalInputs(3);
DisplayDigitalInputs(3);
locate( 25, 56);
color(CF_SETTINGS,CB_SETTINGS);
cprintf(currenttime); /* update current time on screen */
//locate(20,1);cprintf("cur_min=%d",cur_min);
old_sec = cur_sec;
// EVENTS (new function)
//OutputBit(0,valueInput[0]);
//OutputBit(1,valueInput[1]);
//OutputBit(2,valueInput[2]);
//OutputBit(3,valueInput[3]);
if (valueInput[1] == 1) {
WritePort(1);
DisplayPort(1,XOUTPUT,YOUTPUT);
}
if (valueAnalog[0] < 50) {
WritePort(16);
DisplayPort(16,XOUTPUT,YOUTPUT);
}
Log("e:\\user\\c\\a_pcio\\logfile.log", currenttime);
}
if( kbhit() ) {
result = getkeypressed(); /* get a single keypress */
switch (result) { /* perform task user pressed */
case 27: { /* ESC */
Message( "Do you really want to quit? (Y/n) " , 0);
key = getch();
if( ( key == 'Y') || (key =='y') || (key == 13) )
keepgoing = 0; /* stop program execution */
Message("", 0);
}
break;
case 59: { /* F1 */
Message("Initialising",0);
Message("Fast Pulse", 0);
Pulse(255, gPulse_fast);
}
break;
case 60: { /* F2 */
Message("Storage CRO - enter settings", 0);
//getch();
gotoHiResMode();
DrawOscilliscopeScreen(50,0,550,255,50,51);
StorageOscilliscope("waiting for trigger", 1, 0, 220, 40, 0, 499);
InitDisplay();
}
break;
case 61: { /* F3 */
gotoHiResMode();
DrawOscilliscopeScreen(100,100,355,355,20,32);
Oscilliscope();
InitDisplay();
Message("Oscilliscope", 0);
Pulse(255, gPulse_slow);
}
break;
case 62: { /* F4 */
Message("BinaryCount", 0);
BinaryCount(gCounter);
}
break;
case 63: { /* F5 */
Message("Chase Multiple", 0);
ChaseMultiple(gIterations, gSpeed);
}
break;
case 64: { /* F6 */
Message("Chase Up", 0);
Chase(gSpeed, 0, 7);
}
break;
case 65: { /* F7 */
Message("Chase Down", 0);
Chase(gSpeed, 7,0);
}
break;
case 66: { /* F8 */
Message("Reading Analog inputs", 0);
ReadAnalogInputs(3);
DisplayAnalogValues(3);
ReadDigitalInputs(3);
DisplayDigitalInputs(3);
}
break;
case 67: { /* F9 */
Message("Logging - PRESS A KEY TO STOP", 0);
FastAcquisition("e:\\user\\c\\a_pcio\\fastlog.log", currenttime);
Message("Done Logging to e:\user\c\a_pcio\fastlog.log", 0);
}
break;
case 68: { /* F10 */
Message("Setup", 0);
//locate(12,65); scanf("%d", &gPORT); // port change
locate(11, 62);
color(CF_SETTINGS,CB_SETTINGS);
// color(YELLOW,BLACK);
cprintf("Enter new settings");
locate(13,75); scanf("%d", &gCounter); // port change
if(gCounter<0||gCounter>999) gCounter=10; else fflush(stdin);
locate(14,75); scanf("%d", &gSpeed); // port change
if(gSpeed<0||gSpeed>999) gSpeed=10; else fflush(stdin);
locate(15,75); scanf("%d", &gPulse_fast); // port change
if(gPulse_fast<0||gPulse_fast>999) gPulse_fast=10; else fflush(stdin);
locate(16,75); scanf("%d", &gPulse_slow); // port change
if(gPulse_slow<0||gPulse_slow>999) gPulse_slow=10; else fflush(stdin);
locate(17,75); scanf("%d", &gIterations); // port change
if(gIterations<0||gIterations>999) gIterations=10; else fflush(stdin);
DisplaySettings(XSETTINGS,YSETTINGS);
}
break;
case 48: { OutputBit(0,2); DisplayPort(1,XOUTPUT,YOUTPUT); } break;
case 49: { OutputBit(1,2); DisplayPort(2,XOUTPUT,YOUTPUT); } break;
case 50: { OutputBit(2,2); DisplayPort(4,XOUTPUT,YOUTPUT); } break;
case 51: { OutputBit(3,2); DisplayPort(16,XOUTPUT,YOUTPUT); } break;
case 52: { OutputBit(4,2); DisplayPort(32,XOUTPUT,YOUTPUT); } break;
case 53: { OutputBit(5,2); DisplayPort(64,XOUTPUT,YOUTPUT); } break;
case 54: { OutputBit(6,2); DisplayPort(128,XOUTPUT,YOUTPUT); } break;
case 55: { OutputBit(7,2); DisplayPort(255,XOUTPUT,YOUTPUT); } break;
case 43: { WritePort(++valueOutput[0]); } break;
case 45: { WritePort(--valueOutput[0]); } break;
}
}
}
return 0;
}
//enum errorType WritePort(char *buff ,unsigned int num_to_write); gsSerialPort definition
errorType Write(GSIChar chr) {return(WritePort( (char *)&chr,1));}
int initBluetooth(struct sserial_props *pProps, const char *btName, const char *btPin) {
char pTxBuff[32];
char pRxBuff[RX_BUFF_LENGTH] = {0};
int bSame, nLength;
LOGI("> Triger reset pin");
resetBluetooth(pProps);
LOGI("> Switch device to AT-mode");
ClrDtr(pProps);
SleepMs(1000);
#if 0
LOGV("> Reset to default");
WritePort(pProps, "AT+ORGL" CRLF, strlen("AT+ORGL" CRLF));
SleepMs(1000);
#endif
LOGV("> Switch to Slave mode");
WritePort(pProps, "AT+ROLE=0" CRLF, strlen("AT+ROLE=0" CRLF));
if (readLine(pProps, pRxBuff, OK_BUFF_LENGTH) <= 0 &&
strncasecmp(pRxBuff, "ok", 2)) {
LOGE("AT+ROLE failed to set (%s)", pRxBuff);
return 0;
}
if (getResult(pProps, "AT+NAME?" CRLF, pRxBuff, RX_BUFF_LENGTH)) {
bSame = strncmp(pRxBuff, btName, strlen(btName)) == 0;
// Get "OK"
readLine(pProps, pRxBuff, OK_BUFF_LENGTH);
if (bSame) {
LOGW("Bluetooth name is same and will not be changed");
goto skip_name;
}
}
LOGV("> Set name");
nLength = sprintf(pTxBuff, "AT+NAME=%s" CRLF, btName);
WritePort(pProps, pTxBuff, nLength);
if (readLine(pProps, pRxBuff, OK_BUFF_LENGTH) <= 0 &&
strncasecmp(pRxBuff, "ok", 2)) {
LOGE("AT+NAME failed to set (%s)", pRxBuff);
return 0;
}
skip_name:
if (getResult(pProps, "AT+PSWD?" CRLF, pRxBuff, RX_BUFF_LENGTH)) {
bSame = strncmp(pRxBuff, btPin, strlen(btPin)) == 0;
// Get "OK"
readLine(pProps, pRxBuff, OK_BUFF_LENGTH);
if (bSame) {
LOGW("Bluetooth pin code is same and will not be changed");
goto skip_password;
}
}
LOGV("> Set password");
nLength = sprintf(pTxBuff, "AT+PSWD=%s" CRLF, btPin);
WritePort(pProps, pTxBuff, nLength);
if (readLine(pProps, pRxBuff, OK_BUFF_LENGTH) <= 0 &&
strncasecmp(pRxBuff, "ok", 2)) {
LOGE("AT+PSWD failed to set (%s)", pRxBuff);
return 0;
}
skip_password:
LOGI("> Switch device to Data-mode");
SetDtr(pProps);
SleepMs(10);
resetBluetooth(pProps);
return 1;
}
/////////////////////////////////////////////////////////////////////////////////
// 函数：SendMsg //
// 说明：通过指定端口，发送短信 //
// 参数： //
// strRecvPhone，接收手机号码 //
// strMsgContent，短信内容 //
// strPortName，串行端口的名称 //
/////////////////////////////////////////////////////////////////////////////////
int CSerialPort::SendMsg(CString strRecvPhone , CString strMsgContent)
{
m_strRecvPhone = strRecvPhone;
m_strMsgContent = strMsgContent;
int i=0 , t=0;
char ans[128]; // 应答串
//char SCA[16]; // 短消息服务中心号码(SMSC地址)
char TPA[16]; // 目标号码或回复号码(TP-DA或TP-RA)
//char TP_PID; // 用户信息协议标识(TP-PID)
//char TP_DCS; // 用户信息编码方式(TP-DCS)
// char TP_UD[161]; // 原始用户信息(编码前或解码后的TP-UD)
char cmd[20];
MsgList *msglist = new MsgList;
int iPage = page(strMsgContent.GetBuffer(strMsgContent.GetLength()),msglist);
t= m_strRecvPhone.GetLength()+2;
for(i=2;i<t;i++)
{
TPA[i]=m_strRecvPhone.GetAt(i-2);
}
TPA[0]='8';
TPA[1]='6';
TPA[t]='\0';
for(int iIndex=0 ;iIndex < iPage;iIndex++)
{
sprintf(cmd , "AT\r");
WritePort(cmd, strlen(cmd));
Sleep(ShortSleepTime);
int nLength = ReadPort(ans, 128);
ans[nLength] = '\0';
sprintf(cmd, "ATE0\r");
WritePort(cmd, strlen(cmd));
Sleep(ShortSleepTime);
nLength = ReadPort(ans, 128);
ans[nLength] = '\0';
sprintf(cmd, "AT+CSMS=0\r");
WritePort(cmd, strlen(cmd));
Sleep(ShortSleepTime);
nLength = ReadPort(ans, 128);
ans[nLength] = '\0';
sprintf(cmd, "AT+CMGF=0\r");
WritePort(cmd, strlen(cmd));
Sleep(ShortSleepTime);
nLength = ReadPort(ans, 128);
ans[nLength] = '\0';
sm_param_temp= new SM_PARAM;
strcpy(sm_param_temp->SCA,m_SmsCenterNum);
sm_param_temp->TP_DCS=0x8;
sm_param_temp->TP_PID=0x0;
strcpy(sm_param_temp->TPA,TPA);
strcpy(sm_param_temp->TP_UD,msglist->chMsg);
if(iPage > 1)
sprintf(sm_param_temp->TP_UD,"%d/%d %s" ,iIndex+1,iPage,msglist->chMsg);
//printf("Msg :%s\n" ,sm_param_temp->TP_UD);
msglist = msglist->pNext;
if(!gsmSendMessage(sm_param_temp))//发送短信
{
printf("Send SMS Failed\n");
return -1;
}
Sleep(5000);
}
return 0;
}
void mahaf_WritePort32(u16 port, u32 value)
{
WritePort(port, value, 4);
}
void mahaf_WritePort8(u16 port, u8 value)
{
WritePort(port, (u32)value, 1);
}
void mahaf_WritePort16(u16 port, u16 value)
{
WritePort(port, (u32)value, 2);
}
