void Sound_Engine::Internal::Init(){
pXAudio2=0;
pMasteringVoice=0;
pSubmixVoice=0;
pReverbEffect=0;
nFrameToApply3DAudio=0;
dwChannelMask=0;
nChannels=0;
CoInitializeEx(NULL, COINIT_MULTITHREADED);
HR(XAudio2Create( &pXAudio2, 0 )) ;
HR(pXAudio2->CreateMasteringVoice( &pMasteringVoice ) );
// Check device details to make sure it's within our sample supported parameters
XAUDIO2_DEVICE_DETAILS details;
HR(pXAudio2->GetDeviceDetails( 0, &details ) );
if( details.OutputFormat.Format.nChannels > OUTPUTCHANNELS ){
RELEASECOM( pXAudio2 );
assert(true);
}
dwChannelMask = details.OutputFormat.dwChannelMask;
nChannels = details.OutputFormat.Format.nChannels;
HR(XAudio2CreateReverb( &pReverbEffect, 0 ) ); // Create reverb effect
// Create a submix voice
// Performance tip: you need not run global FX with the sample number
// of channels as the final mix. For example, this sample runs
// the reverb in mono mode, thus reducing CPU overhead.
XAUDIO2_EFFECT_DESCRIPTOR effects[] = { { pReverbEffect, TRUE, 1 } };
XAUDIO2_EFFECT_CHAIN effectChain = { 1, effects };
HR(pXAudio2->CreateSubmixVoice( &pSubmixVoice, 1,details.OutputFormat.Format.nSamplesPerSec, 0, 0, NULL, &effectChain ) );
// Set default FX params
XAUDIO2FX_REVERB_PARAMETERS native;
ReverbConvertI3DL2ToNative( &g_PRESET_PARAMS[0], &native );
pSubmixVoice->SetEffectParameters( 0, &native, sizeof( native ) );
//
// Initialize X3DAudio
// Speaker geometry configuration on the final mix, specifies assignment of channels
// to speaker positions, defined as per WAVEFORMATEXTENSIBLE.dwChannelMask
X3DAudioInitialize( details.OutputFormat.dwChannelMask, X3DAUDIO_SPEED_OF_SOUND, x3DInstance );
CurrentListenerPos = D3DXVECTOR3( 0, 0, 0 );
listener.Position = CurrentListenerPos;
listener.OrientFront = D3DXVECTOR3( 0, 0, 1 );
listener.OrientTop = D3DXVECTOR3( 0, 1, 0 );
listener.pCone = (X3DAUDIO_CONE*)&Listener_DirectionalCone;
dspSettings.SrcChannelCount = INPUTCHANNELS;
dspSettings.DstChannelCount = nChannels;
dspSettings.pMatrixCoefficients = matrixCoefficients;
}
int CZPlayer::InitAudio()
{
ZeroMemory(m_audioState,sizeof(AUDIO_STATE));
CoInitializeEx(NULL,COINIT_MULTITHREADED);
UINT32 flags = 0;
#ifdef _DEBUG
flags |= XAUDIO2_DEBUG_ENGINE;
#endif
HRESULT hr;
if(FAILED(hr = XAudio2Create(&m_audioState->pXAudio2,flags)))
return -1;
if( FAILED( hr = m_audioState->pXAudio2->CreateMasteringVoice( &m_audioState->pMasteringVoice ) ) )
{
SAFE_RELEASE( m_audioState->pXAudio2 );
return -1;
}
if( FAILED( hr = m_audioState->pXAudio2->GetDeviceDetails( 0, &m_details ) ) )
{
SAFE_RELEASE( m_audioState->pXAudio2 );
return -1;
}
//
// Create reverb effect
//
flags = 0;
#ifdef _DEBUG
flags |= XAUDIO2FX_DEBUG;
#endif
if( FAILED( hr = XAudio2CreateReverb( &m_audioState->pReverbEffect, flags ) ) )
{
SAFE_RELEASE( m_audioState->pXAudio2 );
return -1;
}
//Create a submix voice
//Performance tip: you need not run global FX with the sample number
//of channels as the final mix. For example, this sample runs
//the reverb in mono mode, thus reducing CPU overhead.
XAUDIO2_EFFECT_DESCRIPTOR effects[] = { { m_audioState->pReverbEffect, TRUE, 1 } };
XAUDIO2_EFFECT_CHAIN effectChain = { 1, effects };
if( FAILED( hr = m_audioState->pXAudio2->CreateSubmixVoice( &m_audioState->pSubmixVoice, 1,
m_details.OutputFormat.Format.nSamplesPerSec, 0, 0,
NULL, &effectChain ) ) )
{
SAFE_RELEASE( m_audioState->pXAudio2 );
SAFE_RELEASE( m_audioState->pReverbEffect );
return -1;
}
XAUDIO2FX_REVERB_PARAMETERS native;
ReverbConvertI3DL2ToNative( &g_PRESET_PARAMS[1], &native );
m_audioState->pSubmixVoice->SetEffectParameters( 0, &native, sizeof( native ) );
m_audioState->pSourceVoice = 0;
// done
m_audioState->bInitialized = true;
m_playerState.stop = true;
return 0;
}
bool Audio3D::initialiseAudio()
{
if (m_masteringVoice != NULL)
m_masteringVoice->DestroyVoice();
SAFE_RELEASE(m_XAudio2);
HRESULT hr;
if (FAILED(hr = XAudio2Create( &m_XAudio2, 0)))
{
LOG->logMsg(LT_ERROR, "Error while creating XAudio2: %#X", hr);
SAFE_RELEASE(m_XAudio2);
return false;
}
if (FAILED(hr = m_XAudio2->CreateMasteringVoice(&m_masteringVoice)))
{
LOG->logMsg(LT_ERROR, "Audio3D: Error while creating master voice: %#X", hr);
return false;
}
XAUDIO2_DEVICE_DETAILS details;
if( FAILED( hr = m_XAudio2->GetDeviceDetails( 0, &details ) ) )
{
SAFE_RELEASE( m_XAudio2 );
LOG->logMsg(LT_ERROR, "Failed to retrieve DeviceDetails: %#X", hr);
return false;
}
if( details.OutputFormat.Format.nChannels > OUTPUTCHANNELS )
{
SAFE_RELEASE( m_XAudio2 );
LOG->logMsg(LT_ERROR, "nChannels too large.");
return false;
}
m_channelMask = details.OutputFormat.dwChannelMask;
m_channels = details.OutputFormat.Format.nChannels;
//Create reverb effect:
if( FAILED( hr = XAudio2CreateReverb( &m_reverbEffect, 0 ) ) )
{
SAFE_RELEASE( m_XAudio2 );
LOG->logMsg(LT_ERROR, "Failed to create reverb: %#X", hr);
return false;
}
//Create submix voice for mixing effects
XAUDIO2_EFFECT_DESCRIPTOR effects[] = { { m_reverbEffect, TRUE, 1 } };
XAUDIO2_EFFECT_CHAIN effectChain = { 1, effects };
if( FAILED( hr = m_XAudio2->CreateSubmixVoice( &m_submixVoice, 1,
details.OutputFormat.Format.nSamplesPerSec, 0, 0,
NULL, &effectChain ) ) )
{
SAFE_RELEASE( m_XAudio2 );
SAFE_RELEASE( m_reverbEffect );
LOG->logMsg(LT_ERROR, "Failed to create submix voice: %#X", hr);
return false;
}
// Set default FX params
XAUDIO2FX_REVERB_PARAMETERS native;
ReverbConvertI3DL2ToNative( &PRESET_PARAMS[0], &native );
m_submixVoice->SetEffectParameters( 0, &native, sizeof( native ) );
const float SPEEDOFSOUND = X3DAUDIO_SPEED_OF_SOUND;
X3DAudioInitialize( details.OutputFormat.dwChannelMask, SPEEDOFSOUND, m_x3DInstance );
m_useInnerRadius = true;
m_listenerPos = D3DXVECTOR3( 0, 0, 0 );
m_useRedirectToLFE = ((details.OutputFormat.dwChannelMask & SPEAKER_LOW_FREQUENCY) != 0);
//
// Setup 3D audio structs
//
m_listener.Position = m_listenerPos;
m_listener.OrientFront = D3DXVECTOR3( 0, 1, 0 );
m_listener.OrientTop = D3DXVECTOR3( 0, 1, 0 );
m_listener.pCone = (X3DAUDIO_CONE*)&m_listener_DirectionalCone;
//LOG->logMsg(LT_STATUS, "Audio3D: initialized.");
this->m_curveDistanceScaler = 60.0f;
m_initialized = true;
return true;
}
void Sound::Play()
{
ASSERT(m_currentSource);
XAUDIO2_DEVICE_DETAILS& deviceDetails = Gui::deviceDetails;
AudioClip* source = dynamic_cast<AudioClip*>(m_currentSource);
if (m_sourceVoice == nullptr)
{
//
// Create reverb effect
//
UINT32 flags = 0;
#ifdef _DEBUG
flags |= XAUDIO2FX_DEBUG;
#endif
XAudio2CreateReverb(&m_reverbEffect, flags);
// Performance tip: you need not run global FX with the sample number
// of channels as the final mix. For example, this sample runs
// the reverb in mono mode, thus reducing CPU overhead.
XAUDIO2_EFFECT_DESCRIPTOR effects[] =
{
{ m_reverbEffect, TRUE, 1 }
};
XAUDIO2_EFFECT_CHAIN effectChain = { _countof(effects), effects };
Gui::pXAudio2->CreateSubmixVoice(&m_submixVoice,
1, // Input channels
deviceDetails.OutputFormat.Format.nSamplesPerSec, // Input sample rate
0, // Flags
0, // ProcessingStage
nullptr, // SendList
&effectChain);
XAUDIO2FX_REVERB_I3DL2_PARAMETERS g_PRESET_PARAMS[1] =
{
XAUDIO2FX_I3DL2_PRESET_FOREST
};
// Set default FX params
XAUDIO2FX_REVERB_PARAMETERS native;
ReverbConvertI3DL2ToNative(&g_PRESET_PARAMS[0], &native);
m_submixVoice->SetEffectParameters(0, &native, sizeof(native));
//
// Play the wave using a source voice that sends to both the submix and mastering voices
//
XAUDIO2_SEND_DESCRIPTOR sendDescriptors[2];
sendDescriptors[0].Flags = XAUDIO2_SEND_USEFILTER; // LPF direct-path
sendDescriptors[0].pOutputVoice = Gui::pMasteringVoice;
sendDescriptors[1].Flags = XAUDIO2_SEND_USEFILTER; // LPF reverb-path -- omit for better performance at the cost of less realistic occlusion
sendDescriptors[1].pOutputVoice = m_submixVoice;
const XAUDIO2_VOICE_SENDS sendList = { _countof(sendDescriptors), sendDescriptors };
Gui::pXAudio2->CreateSourceVoice(&m_sourceVoice, &source->m_wave->get_Format(),
XAUDIO2_VOICE_USEFILTER, XAUDIO2_DEFAULT_FREQ_RATIO, nullptr, &sendList, nullptr);
#if 0
XAUDIO2_SEND_DESCRIPTOR SFXSend[] =
{
{0/*XAUDIO2_SEND_USEFILTER*/, m_scene->m_submixVoice},
{0/*XAUDIO2_SEND_USEFILTER*/, Gui::pMasteringVoice},
};
XAUDIO2_VOICE_SENDS SFXSendList = {_countof(SFXSend), SFXSend};
Gui::pXAudio2->CreateSourceVoice(&m_sourceVoice, (WAVEFORMATEX*)&source->m_wfx,
XAUDIO2_VOICE_USEFILTER, XAUDIO2_DEFAULT_FREQ_RATIO, NULL, &SFXSendList, NULL);
#endif
}
ASSERT(source->m_wave->m_audioBytes <= XAUDIO2_MAX_BUFFER_BYTES);
XAUDIO2_BUFFER buffer;
buffer.AudioBytes = source->m_wave->m_audioBytes;
buffer.Flags = XAUDIO2_END_OF_STREAM;
buffer.LoopBegin = 0;
buffer.LoopCount = XAUDIO2_LOOP_INFINITE;
buffer.LoopLength = 0;
buffer.pAudioData = source->m_wave->m_audioData;
buffer.pContext = nullptr;
buffer.PlayBegin = 0;
buffer.PlayLength = 0;
float volume = getIntensity(); // TODO ??
m_sourceVoice->SetVolume(volume);
m_sourceVoice->SubmitSourceBuffer(&buffer);
m_sourceVoice->Start(0, XAUDIO2_COMMIT_NOW);
}
M3D_RESULT __stdcall M3D_activate(int enable)
{
if(enable)
{
if(pXAudio2)
return M3D_ALREADY_STARTED;
char ReverbVolumeText[256];
if(!GothicReadIniString("PARAMETERS", "ReverbVolume", "3.0", ReverbVolumeText, 256, "SystemPack.ini"))
GothicWriteIniString("PARAMETERS", "ReverbVolume", "3.0", "SystemPack.ini");
ReverbVolume = (float)atof(ReverbVolumeText);
HRESULT hResult = S_OK;
if(FAILED(hResult = XAudio2Create(&pXAudio2, 0, XAUDIO2_DEFAULT_PROCESSOR)))
{
#ifdef LOG
fprintf(Log, "M3D_activate XAudio2Create failed %d\n", hResult);
#endif
return M3D_NOT_INIT;
}
memset(&deviceDetails, 0, sizeof(XAUDIO2_DEVICE_DETAILS));
if(FAILED(hResult = pXAudio2->GetDeviceDetails(0, &deviceDetails)))
{
pXAudio2->Release();
pXAudio2 = NULL;
#ifdef LOG
fprintf(Log, "M3D_activate GetDeviceDetails failed %d\n", hResult);
#endif
return M3D_NOT_INIT;
}
UINT32 SampleRate = MIN(MAX(deviceDetails.OutputFormat.Format.nSamplesPerSec, XAUDIO2FX_REVERB_MIN_FRAMERATE), XAUDIO2FX_REVERB_MAX_FRAMERATE);
if(FAILED(hResult = pXAudio2->CreateMasteringVoice(&pMasterVoice, XAUDIO2_DEFAULT_CHANNELS, SampleRate)))
{
pXAudio2->Release();
pXAudio2 = NULL;
#ifdef LOG
fprintf(Log, "M3D_activate CreateMasteringVoice failed %d\n", hResult);
#endif
return M3D_NOT_INIT;
}
X3DAudioInitialize(deviceDetails.OutputFormat.dwChannelMask, X3DAUDIO_SPEED_OF_SOUND, X3DAudioInstance);
memset(&Listener, 0, sizeof(M3D_Listener));
Listener.pMasterVoice = pMasterVoice;
Listener.Z_face = 1.0f;
Listener.Y_up = 1.0f;
UpdateAllSamples();
X3DDSPSettings.SrcChannelCount = 1;
X3DDSPSettings.DstChannelCount = deviceDetails.OutputFormat.Format.nChannels;
X3DDSPSettings.pMatrixCoefficients = new FLOAT32[deviceDetails.OutputFormat.Format.nChannels];
memset(X3DDSPSettings.pMatrixCoefficients, 0, sizeof(FLOAT32) * deviceDetails.OutputFormat.Format.nChannels);
Samples = new M3D_Source[MAX_SAMPLES_COUNT];
memset(Samples, 0, sizeof(M3D_Source) * MAX_SAMPLES_COUNT);
for(int i = 0; i < MAX_SAMPLES_COUNT; i++)
{
SetSampleDefaults(&Samples[i]);
if(FAILED(hResult = XAudio2CreateReverb(&Samples[i].pReverbEffect)))
{
pMasterVoice->DestroyVoice();
pMasterVoice = NULL;
pXAudio2->Release();
pXAudio2 = NULL;
#ifdef LOG
fprintf(Log, "M3D_activate XAudio2CreateReverb failed %d\n", hResult);
#endif
return M3D_NOT_INIT;
}
XAUDIO2_EFFECT_DESCRIPTOR effects[] = { { Samples[i].pReverbEffect, TRUE, 1 } };
XAUDIO2_EFFECT_CHAIN effectChain = { 1, effects };
if(FAILED(hResult = pXAudio2->CreateSubmixVoice(&Samples[i].pSubmixVoice, 1, SampleRate, 0, 0, NULL, Samples[i].pReverbEffect ? &effectChain : NULL)))
{
Samples[i].pReverbEffect->Release();
Samples[i].pReverbEffect = NULL;
pMasterVoice->DestroyVoice();
pMasterVoice = NULL;
pXAudio2->Release();
pXAudio2 = NULL;
#ifdef LOG
fprintf(Log, "M3D_activate CreateSubmixVoice(%d) failed %d\n", deviceDetails.OutputFormat.Format.nSamplesPerSec, hResult);
#endif
return M3D_NOT_INIT;
}
XAUDIO2FX_REVERB_PARAMETERS native;
ReverbConvertI3DL2ToNative( &ROOM_PRESET_PARAMS[Current_EAX_room_type], &native );
Samples[i].pSubmixVoice->SetEffectParameters(0, &native, sizeof(native));
}
}
else
{
if(!pXAudio2)
return M3D_NOT_INIT;
if(Samples)
{
for(int i = 0; i < MAX_SAMPLES_COUNT; i++)
{
M3D_end_3D_sample((M3D_SAMPLE)&Samples[i]);
if(Samples[i].pSubmixVoice)
{
Samples[i].pSubmixVoice->DestroyVoice();
Samples[i].pSubmixVoice = NULL;
}
if(Samples[i].pReverbEffect)
{
Samples[i].pReverbEffect->Release();
Samples[i].pReverbEffect = NULL;
}
}
delete[] Samples;
Samples = NULL;
}
if(pMasterVoice)
{
pMasterVoice->DestroyVoice();
pMasterVoice = NULL;
}
if(X3DDSPSettings.pMatrixCoefficients)
{
delete[] X3DDSPSettings.pMatrixCoefficients;
X3DDSPSettings.pMatrixCoefficients = NULL;
}
if(pXAudio2)
{
pXAudio2->Release();
pXAudio2 = NULL;
}
}
#ifdef LOG
fprintf(Log, "M3D_activate(%d) ok\n", enable);
#endif
return M3D_NOERR;
}
