uint32_t UARTD_DisableTxChannels( UartDma *pUartd, UartChannel *pTxCh)
{
assert(pTxCh);
/* Enables the USART to transfer data. */
UART_SetTransmitterEnabled ( pUartd->pUartHw , DISABLE);
XDMAD_StopTransfer(pUartd->pXdmad, pTxCh->ChNum);
XDMAD_SetCallback(pUartd->pXdmad, pTxCh->ChNum, NULL, NULL);
/* Free allocated DMA channel for USART TX. */
if(XDMAD_FreeChannel( pUartd->pXdmad, pTxCh->ChNum) != XDMAD_OK) {
return USARTD_ERROR;
}
if (pTxCh->dmaProgrammingMode == XDMAD_LLI) {
free(pTxCh->pLLIview);
pTxCh->pLLIview = NULL;
}
pTxCh->sempaphore = 1;
memory_barrier();
return 0;
}
/**
* USART interrupt handler
*/
void USART2_Handler(void)
{
Usart *pUs = BASE_USART;
uint32_t status;
uint16_t serialState;
uint32_t count;
status = USART_GetStatus(pUs);
status &= USART_GetItMask(pUs);
/* If USB device is not configured, do nothing */
if (!isCdcSerialON) {
USART_DisableIt(pUs, 0xFFFFFFFF);
return;
}
if (status & US_CSR_TIMEOUT) {
/*Clear TIMEOUT Flag and Start Time-out After Next Character Received*/
USART_AcknowledgeRxTimeOut(BASE_USART, 0);
/* Flush the DMA FIFO */
XDMAC_SoftwareFlushReq(dmad.pXdmacs, usartDmaRxChannel);
/* Transfer the last pack through USB */
count = dmad.pXdmacs->XDMAC_CHID[usartDmaRxChannel].XDMAC_CUBC;
SCB_InvalidateDCache_by_Addr((uint32_t *)usartBuffers, DATAPACKETSIZE - count);
while (CDCDSerialDriver_Write(usartBuffers, DATAPACKETSIZE - count, 0, 0)
!= USBD_STATUS_SUCCESS);
/*Reset DMA transfer*/
XDMAD_StopTransfer(&dmad, usartDmaRxChannel);
_UsartDmaRx();
} else {
/* Errors */
serialState = CDCDSerialDriver_GetSerialState();
/* Overrun */
if ((status & US_CSR_OVRE) != 0) {
TRACE_WARNING("USART_IrqHandler: Overrun\n\r");
serialState |= CDCSerialState_OVERRUN;
}
/* Framing error */
if ((status & US_CSR_FRAME) != 0) {
TRACE_WARNING("USART_IrqHandler: Framing error\n\r");
serialState |= CDCSerialState_FRAMING;
}
CDCDSerialDriver_SetSerialState(serialState);
}
}
/**
* \brief This function disables the appropriate DMA channel for Rx channel of
* USART
* \param pUsartd Pointer to a UsartDma instance.
* \param pRxCh Pointer to TxChannel configuration
* \returns 0 if the transfer has been started successfully;
* otherwise returns USARTD_ERROR_LOCK is the driver is in use, or
* USARTD_ERROR if the command is not valid.
*/
uint32_t USARTD_DisableRxChannels(UsartDma *pUsartd, UsartChannel *pRxCh)
{
assert(pRxCh);
/* Enables the USART to transfer data. */
USART_SetReceiverEnabled (pUsartd->pUsartHw , DISABLE);
XDMAD_StopTransfer(pUsartd->pXdmad, pRxCh->ChNum);
XDMAD_SetCallback(pUsartd->pXdmad, pRxCh->ChNum, NULL, NULL);
/* Free allocated DMA channel for USART TX. */
if (XDMAD_FreeChannel(pUsartd->pXdmad, pRxCh->ChNum) != XDMAD_OK)
return USARTD_ERROR;
if (pRxCh->dmaProgrammingMode == XDMAD_LLI) {
free(pRxCh->pLLIview);
pRxCh->pLLIview = NULL;
}
pRxCh->dmaProgress = 1;
return 0;
}
