/*----------------------------------------------------------------------
* main function
*----------------------------------------------------------------------*/
int
main(int argc, char *argv[])
{
size_t len;
ConfigVars_t XLAL_INIT_DECL(GV);
UserVariables_t XLAL_INIT_DECL(uvar);
/* ------------------------------
* read user-input and set up shop
*------------------------------*/
XLAL_CHECK ( XLALInitUserVars ( &uvar, argc, argv ) == XLAL_SUCCESS, XLAL_EFUNC );
XLAL_CHECK ( XLALInitMakefakedata ( &GV, &uvar ) == XLAL_SUCCESS, XLAL_EFUNC );
MultiSFTVector *mSFTs = NULL;
MultiREAL8TimeSeries *mTseries = NULL;
PulsarParamsVector *injectionSources = NULL;
if ( uvar.injectionSources ) {
XLAL_CHECK ( (injectionSources = XLALPulsarParamsFromUserInput ( uvar.injectionSources, NULL ) ) != NULL, XLAL_EFUNC );
}
CWMFDataParams XLAL_INIT_DECL(DataParams);
DataParams.multiIFO = GV.multiIFO;
DataParams.multiNoiseFloor = GV.multiNoiseFloor;
DataParams.multiTimestamps = (*GV.multiTimestamps);
DataParams.randSeed = uvar.randSeed;
DataParams.SFTWindowType = uvar.SFTWindowType;
DataParams.SFTWindowBeta = uvar.SFTWindowBeta;
if ( GV.inputMultiTS == NULL )
{
DataParams.fMin = uvar.fmin;
DataParams.Band = uvar.Band;
DataParams.inputMultiTS = NULL;
}
else // current limitation: FIXME
{
DataParams.fMin = 0;
DataParams.Band = 0;
DataParams.inputMultiTS = GV.inputMultiTS;
}
XLAL_CHECK ( XLALCWMakeFakeMultiData ( &mSFTs, &mTseries, injectionSources, &DataParams, GV.edat ) == XLAL_SUCCESS, XLAL_EFUNC );
XLALDestroyPulsarParamsVector ( injectionSources );
injectionSources = NULL;
// if noiseSFTs specified, load them and add them to the resulting SFT-vector
if ( GV.multiNoiseCatalogView )
{
SFTtype *sft0 = &(mSFTs->data[0]->data[0]);
/* load effective frequency-band from noise-SFTs */
UINT4 numBins = sft0->data->length;
REAL8 dFreq = sft0->deltaF;
REAL8 fMin = sft0->f0;
REAL8 fMax = fMin + ( numBins - 1 ) * dFreq;
MultiSFTVector *mNoiseSFTs;
XLAL_CHECK ( (mNoiseSFTs = XLALLoadMultiSFTsFromView ( GV.multiNoiseCatalogView, fMin, fMax )) != NULL, XLAL_EFUNC );
XLAL_CHECK ( XLALMultiSFTVectorAdd ( mSFTs, mNoiseSFTs ) == XLAL_SUCCESS, XLAL_EFUNC );
XLALDestroyMultiSFTVector ( mNoiseSFTs );
}
if (uvar.outSFTdir)
{
XLAL_CHECK ( is_directory ( uvar.outSFTdir ), XLAL_EINVAL );
/* generate comment string */
CHAR *logstr;
XLAL_CHECK ( (logstr = XLALUserVarGetLog ( UVAR_LOGFMT_CMDLINE )) != NULL, XLAL_EFUNC );
char *comment = XLALCalloc ( 1, len = strlen ( logstr ) + strlen(GV.VCSInfoString) + 512 );
XLAL_CHECK ( comment != NULL, XLAL_ENOMEM, "XLALCalloc(1,%zu) failed.\n", len );
sprintf ( comment, "Generated by:\n%s\n%s\n", logstr, GV.VCSInfoString );
for ( UINT4 X=0; X < mSFTs->length; X ++ )
{
SFTVector *sfts = mSFTs->data[X];
/* either write whole SFT-vector to single concatenated file */
if ( uvar.outSingleSFT ) {
XLAL_CHECK ( XLALWriteSFTVector2File( sfts, uvar.outSFTdir, comment, uvar.outLabel ) == XLAL_SUCCESS, XLAL_EFUNC );
} else { // or as individual SFT-files
XLAL_CHECK ( XLALWriteSFTVector2Dir( sfts, uvar.outSFTdir, comment, uvar.outLabel ) == XLAL_SUCCESS, XLAL_EFUNC );
}
} // for X < numIFOs
XLALFree ( logstr );
XLALFree ( comment );
} /* if outSFTdir */
/* output ASCII time-series if requested */
if ( uvar.TDDfile )
{
CHAR *fname = XLALCalloc (1, len = strlen(uvar.TDDfile) + 10 );
XLAL_CHECK ( fname != NULL, XLAL_ENOMEM, "XLALCalloc(1,%zu) failed\n", len );
for ( UINT4 X=0; X < mTseries->length; X ++ )
{
const REAL8TimeSeries *TS = mTseries->data[X];
sprintf (fname, "%c%c-%s", TS->name[0], TS->name[1], uvar.TDDfile );
XLAL_CHECK ( XLALdumpREAL8TimeSeries ( fname, TS ) == XLAL_SUCCESS, XLAL_EFUNC );
} // for X < numDet
XLALFree (fname);
} /* if outputting ASCII time-series */
/* output time-series to frames if requested */
#ifdef HAVE_LIBLALFRAME
if ( GV.outFrameDir != NULL )
{
XLAL_CHECK ( XLALCheckValidDescriptionField ( uvar.outLabel ) == XLAL_SUCCESS, XLAL_EFUNC );
len = strlen(GV.outFrameDir) + strlen(uvar.outLabel) + 100;
char *fname;
char *hist = XLALUserVarGetLog (UVAR_LOGFMT_CMDLINE);
if ( XLALUserVarWasSet ( &uvar.outFrChannels ) ) {
XLAL_CHECK ( uvar.outFrChannels->length == mTseries->length, XLAL_EINVAL, "--outFrChannels: number of channel names (%d) must agree with number of IFOs (%d)\n",
uvar.outFrChannels->length, mTseries->length );
}
for ( UINT4 X=0; X < mTseries->length; X ++ )
{
REAL8TimeSeries *Tseries = mTseries->data[X];
/* use standard frame output filename format */
char IFO[2] = { Tseries->name[0], Tseries->name[1] };
LIGOTimeGPS startTimeGPS = Tseries->epoch;
REAL8 duration = Tseries->data->length * Tseries->deltaT;
XLAL_CHECK ( (fname = LALCalloc (1, len )) != NULL, XLAL_ENOMEM );
size_t written = snprintf ( fname, len, "%s/%c-%c%c_%s-%d-%d.gwf",
GV.outFrameDir, IFO[0], IFO[0], IFO[1], uvar.outLabel, startTimeGPS.gpsSeconds, (int)duration );
XLAL_CHECK ( written < len, XLAL_ESIZE, "Frame-filename exceeds expected maximal length (%zu): '%s'\n", len, fname );
/* define the output frame */
LALFrameH *outFrame;
XLAL_CHECK ( (outFrame = XLALFrameNew ( &startTimeGPS, duration, uvar.outLabel, 1, 0, 0 )) != NULL, XLAL_EFUNC );
/* add timeseries to the frame - make sure to change the timeseries name since this is used as the channel name */
char buffer[LALNameLength];
// if output frame channel names given, use those
if ( XLALUserVarWasSet ( &uvar.outFrChannels ) ) {
written = snprintf ( buffer, sizeof(buffer), "%s", uvar.outFrChannels->data[X] );
if ( buffer[2] == ':' ) { // check we got correct IFO association
XLAL_CHECK ( (buffer[0] == Tseries->name[0]) && (buffer[1] == Tseries->name[1]), XLAL_EINVAL,
"Possible IFO mismatch: outFrChannel[%d] = '%s', IFO = '%c%c': be careful about --outFrChannel ordering\n", X, buffer, Tseries->name[0], Tseries->name[1] );
} // if buffer[2]==':'
} else if ( XLALUserVarWasSet ( &uvar.inFrChannels ) ) { // otherwise: if input frame channel names given, use them for output, append "-<outLabel>"
written = snprintf ( buffer, sizeof(buffer), "%s-%s", uvar.inFrChannels->data[X], uvar.outLabel );
} else { // otherwise: fall back to <IFO>:<outLabel> channel name
written = snprintf ( buffer, sizeof(buffer), "%c%c:%s", Tseries->name[0], Tseries->name[1], uvar.outLabel );
}
XLAL_CHECK ( written < LALNameLength, XLAL_ESIZE, "Output frame name exceeded max length (%d): '%s'\n", LALNameLength, buffer );
strcpy ( Tseries->name, buffer );
XLAL_CHECK ( (XLALFrameAddREAL8TimeSeriesProcData ( outFrame, Tseries ) == XLAL_SUCCESS ) , XLAL_EFUNC );
/* Here's where we add extra information into the frame - first we add the command line args used to generate it */
XLALFrameAddFrHistory ( outFrame, __FILE__, hist );
/* then we add the version string */
XLALFrameAddFrHistory ( outFrame, __FILE__, GV.VCSInfoString );
/* output the frame to file - compression level 1 (higher values make no difference) */
XLAL_CHECK ( XLALFrameWrite ( outFrame, fname ) == XLAL_SUCCESS , XLAL_EFUNC );
/* free the frame, frame file name and history memory */
XLALFrameFree ( outFrame );
XLALFree ( fname );
} // for X < numDetectors
XLALFree ( hist );
} /* if GV.outFrameDir: outputting time-series to frames */
#endif // HAVE_LIBLALFRAME
/* ---------- free memory ---------- */
XLALDestroyMultiREAL8TimeSeries ( mTseries );
XLALDestroyMultiSFTVector ( mSFTs );
XLALFreeMem ( &GV ); /* free the config-struct */
LALCheckMemoryLeaks();
return 0;
} /* main */
/** The main function of binary2sft.c
*
*/
int main( int argc, char *argv[] ) {
UserInput_t uvar = empty_UserInput; /* user input variables */
INT4 i,j; /* counter */
SFTVector *SFTvect = NULL;
char *noisestr = XLALCalloc(1,sizeof(char));
/**********************************************************************************/
/* register and read all user-variables */
if (XLALReadUserVars(argc,argv,&uvar)) {
LogPrintf(LOG_CRITICAL,"%s : XLALReadUserVars() failed with error = %d\n",__func__,xlalErrno);
return 1;
}
LogPrintf(LOG_DEBUG,"%s : read in uservars\n",__func__);
/**********************************************************************************/
/* read in the cache file */
FILE *cachefp = NULL;
if ((cachefp = fopen(uvar.cachefile,"r")) == NULL) {
LogPrintf(LOG_CRITICAL,"%s : failed to open binary input file %s\n",__func__,uvar.cachefile);
return 1;
}
i = 0;
while (fscanf(cachefp,"%*s %*d %*d")!=EOF) i++;
INT4 Nfiles = i;
fclose(cachefp);
LogPrintf(LOG_DEBUG,"%s : counted %d files listed in the cache file.\n",__func__,Nfiles);
/* allocate memory */
char **filenames = LALCalloc(Nfiles,sizeof(char*));
LIGOTimeGPSVector fileStart;
fileStart.data = LALCalloc(Nfiles,sizeof(LIGOTimeGPS));
for (i=0;i<Nfiles;i++) filenames[i] = LALCalloc(512,sizeof(char));
if ((cachefp = fopen(uvar.cachefile,"r")) == NULL) {
LogPrintf(LOG_CRITICAL,"%s : failed to open binary input file %s\n",__func__,uvar.cachefile);
return 1;
}
for (i=0;i<Nfiles;i++) {
fscanf(cachefp,"%s %d %d %*d",filenames[i],&(fileStart.data[i].gpsSeconds),&(fileStart.data[i].gpsNanoSeconds));
}
fclose(cachefp);
/* initialise the random number generator */
gsl_rng * r;
if (XLALInitgslrand(&r,uvar.seed)) {
LogPrintf(LOG_CRITICAL,"%s: XLALinitgslrand() failed with error = %d\n",__func__,xlalErrno);
XLAL_ERROR(XLAL_EFAULT);
}
/* setup the binaryToSFT parameters */
BinaryToSFTparams par;
par.tsft = uvar.tsft;
par.freq = uvar.freq;
par.freqband = uvar.freqband;
par.tsamp = uvar.tsamp;
par.highpassf = uvar.highpassf;
par.amp_inj = uvar.amp_inj;
par.f_inj = uvar.f_inj;
par.asini_inj = uvar.asini_inj;
XLALGPSSetREAL8(&(par.tasc_inj),uvar.tasc_inj);
par.tref = fileStart.data[0];
par.P_inj = uvar.P_inj;
par.phi_inj = uvar.phi_inj;
par.r = r;
/**********************************************************************************/
/* loop over the input files */
long int ntot = 0;
for (j=0;j<Nfiles;j++) {
UINT4 k = 0;
INT8Vector *np = NULL;
REAL8Vector *R = NULL;
par.tstart = fileStart.data[j];
REAL8 norm1 = par.tsamp/par.tsft;
REAL8 norm2 = 1.0/(par.tsamp*par.tsft);
UINT4 oldlen;
if (SFTvect==NULL) oldlen = 0;
else oldlen = SFTvect->length;
LogPrintf(LOG_DEBUG,"%s : working on file %s\n",__func__,filenames[j]);
if (XLALBinaryToSFTVector(&SFTvect,filenames[j],&(fileStart.data[j]),&par,&np,&R)) {
LogPrintf(LOG_CRITICAL,"%s : failed to convert binary input file %s to sfts\n",__func__,filenames[j]);
return 1;
}
if ((np!=NULL) && (R!=NULL)) {
for (k=0;k<np->length;k++) {
ntot += np->data[k];
char temp[64];
sprintf(temp,"%d %e %e\n",SFTvect->data[oldlen+k].epoch.gpsSeconds,(REAL8)np->data[k]*norm1,R->data[k]*norm2);
noisestr = (char *)XLALRealloc(noisestr,sizeof(char)*(1+strlen(noisestr)+strlen(temp)));
strcat(noisestr,temp);
}
XLALDestroyINT8Vector(np);
XLALDestroyREAL8Vector(R);
}
} /* end loop over input files */
/**********************************************************************************/
/* create a noise string */
/**********************************************************************************/
/* generate comment string */
char *VCSInfoString = XLALGetVersionString(0);
XLAL_CHECK ( VCSInfoString != NULL, XLAL_EFUNC, "XLALGetVersionString(0) failed.\n" );
CHAR *logstr;
size_t len;
XLAL_CHECK ( (logstr = XLALUserVarGetLog ( UVAR_LOGFMT_CMDLINE )) != NULL, XLAL_EFUNC );
char *comment = XLALCalloc ( 1, len = strlen ( logstr ) + strlen(VCSInfoString) + strlen(noisestr) + 512 );
XLAL_CHECK ( comment != NULL, XLAL_ENOMEM, "XLALCalloc(1,%zd) failed.\n", len );
sprintf ( comment, "Generated by:\n%s\n%s\nTotal number of photons = %ld\n%s\n", logstr, VCSInfoString, ntot, noisestr );
/**********************************************************************************/
/* either write whole SFT-vector to single concatenated file */
if ( uvar.outSingleSFT ) {
XLAL_CHECK ( XLALWriteSFTVector2File( SFTvect, uvar.outputdir, comment, uvar.outLabel ) == XLAL_SUCCESS, XLAL_EFUNC );
} else { /* or as individual SFT-files */
XLAL_CHECK ( XLALWriteSFTVector2Dir( SFTvect, uvar.outputdir, comment, uvar.outLabel ) == XLAL_SUCCESS, XLAL_EFUNC );
}
/**********************************************************************************/
/* free memory */
XLALDestroySFTVector(SFTvect);
XLALFree(logstr);
XLALFree(comment);
XLALFree(noisestr);
LALCheckMemoryLeaks();
return 0;
}
int main(int argc, char *argv[])
{
const char *fn = __func__;
LALStatus status = empty_status;
SFTCatalog *catalog = NULL;
SFTConstraints constraints = empty_constraints;
SFTVector *sft_vect = NULL;
SFTVector *sft_vect2 = NULL;
MultiSFTVector *multsft_vect = NULL;
MultiSFTVector *multsft_vect2 = NULL;
CHAR detector[2] = "H1";
INT4 crc_check;
/* band to read from infile.* SFTs */
REAL8 fMin = 1008.5;
REAL8 fMax = 1009.1;
if ( argc == 1) /* avoid warning */
argc = 1;
/* check that mal-formated SFTs are properly detected */
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad1", NULL ), &status);
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad2", NULL ), &status);
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad3", NULL ), &status);
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad4", NULL ), &status);
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad5", NULL ), &status);
/* the following (SFT-bad6) has a wrong CRC64 checksum. However, this is
* not checked in LALSFTdataFind, so it should succeed! */
SHOULD_WORK( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad6", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad7", NULL ), &status);
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad8", NULL ), &status);
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad9", NULL ), &status);
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad10", NULL ), &status );
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad11", NULL ), &status );
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad12", NULL ), &status );
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad13", NULL ), &status );
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-bad14", NULL ), &status );
/* now check some crc-checksums */
SHOULD_WORK( LALCheckSFTs ( &status, &crc_check, TEST_DATA_DIR "SFT-test1", NULL ), &status );
if ( crc_check != 0 )
{
XLALPrintError ("\nLALCheckSFTs(): SFT-test1 has correct checksum but LALCheckSFTs claimed it hasn't.\n\n");
return crc_check;
}
SHOULD_WORK( LALCheckSFTs ( &status, &crc_check, TEST_DATA_DIR "SFT-bad6", NULL ), &status );
if ( crc_check != SFTFILEIO_ECRC64 )
{
XLALPrintError ( "\nLALCheckSFTs() failed to catch invalid CRC checksum in SFT-bad6 \n\n");
return SFTFILEIOTESTC_ESUB;
}
/* check that proper v2-SFTs are read-in properly */
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test1", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test2", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test3", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test4", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test5", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test6", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test7", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
/* now completely read-in a v2 merged-SFT */
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test*", NULL ), &status );
/* skip sft nr 4 with has Tsft=50 instead of Tsft=60 */
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test[123567]*", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
/* try the same with a ";" separated list of files and of patterns */
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog,
TEST_DATA_DIR "SFT-test1;"
TEST_DATA_DIR "SFT-test2;"
TEST_DATA_DIR "SFT-test3;"
TEST_DATA_DIR "SFT-test5;"
TEST_DATA_DIR "SFT-test6;"
TEST_DATA_DIR "SFT-test7", NULL ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
SHOULD_WORK ( LALSFTdataFind ( &status, &catalog, TEST_DATA_DIR "SFT-test[123]*;" TEST_DATA_DIR "SFT-test[5]*", NULL ), &status );
/* load once as a single SFT-vector (mix of detectors) */
SHOULD_WORK ( LALLoadSFTs ( &status, &sft_vect, catalog, -1, -1 ), &status );
/* load once as a multi-SFT vector */
SHOULD_WORK ( LALLoadMultiSFTs ( &status, &multsft_vect, catalog, -1, -1 ), &status );
/* load again, using XLAL API */
if ( ( multsft_vect2 = XLALLoadMultiSFTs ( catalog, -1, -1 )) == NULL ) {
XLALPrintError ("%s: XLALLoadMultiSFTs (cat, -1, -1) failed with xlalErrno = %d\n", fn, xlalErrno );
return SFTFILEIOTESTC_ESUB;
}
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
/* 6 SFTs from 2 IFOs should have been read */
if ( (sft_vect->length != 4) /* either as a single SFTVector */
|| (multsft_vect->length != 2) /* or separated by detector */
|| (multsft_vect->data[0]->length != 3) || ( multsft_vect->data[1]->length != 1 ) )
{
XLALPrintError ( "\nFailed to read in multi-SFT from 2 IFOs 'SFT-test*'!\n\n");
return SFTFILEIOTESTC_ESUB;
}
/* compare results from LALLoadMultiSFTs() and XLALLoadMultiSFTs() */
{
UINT4 numIFOs = multsft_vect->length;
UINT4 X;
for ( X=0; X < numIFOs; X ++ )
{
if( CompareSFTVectors ( multsft_vect->data[X], multsft_vect2->data[X] ) ) {
XLALPrintError ("%s: comparing (X)LALLoadMultiSFTs(): sft-vectors differ for X=%d\n", fn, X );
return SFTFILEIOTESTC_ESUB;
}
} /* for X < numIFOs */
} /* ------ */
/* ----- v2 SFT writing ----- */
/* write v2-SFT to disk */
SHOULD_WORK ( LALWriteSFT2file( &status, &(multsft_vect->data[0]->data[0]), "outputsftv2_v2.sft", "A v2-SFT file for testing!"), &status );
SHOULD_WORK ( LALWriteSFTVector2Dir( &status, multsft_vect->data[0], ".", "A v2-SFT file for testing!", "test"), &status);
/* write v2-SFT to single file */
{
const CHAR *currSingleSFT = NULL;
UINT4 i = 0;
FILE *fpConcat = NULL, *fpSingle = NULL;
int concat = 0, single = 0;
xlalErrno = 0;
if (XLAL_SUCCESS != XLALWriteSFTVector2File ( multsft_vect->data[0], ".", "A v2-SFT file for testing!", "test_concat" )) {
LALPrintError ( "\n XLALWriteSFTVector2File failed to write multi-SFT vector to file!\n\n");
return SFTFILEIOTESTC_ESUB;
}
/* check that the single file SFT is the same as the single SFTs */
const UINT4 numSingleSFTs = 3;
const CHAR *singleSFTs[] = {
"H-1_H1_60SFT_test-000012345-61.sft",
"H-1_H1_60SFT_test-000012465-61.sft",
"H-1_H1_60SFT_test-000012585-61.sft"
};
printf("*** Comparing single and concatenated SFTs ***\n");
/* try to open concatenated SFT */
const CHAR *concatSFT = "H-3_H1_60SFT_test_concat-000012345-302.sft";
if ( ( fpConcat = fopen(concatSFT, "rb" ) ) == NULL ) {
LALPrintError ( "\n Cound not open SFT '%s'!\n\n", concatSFT);
return SFTFILEIOTESTC_ESUB;
}
/* do loop while concat. SFT has data */
while (!feof(fpConcat)) {
/* get character from concat. SFT */
concat = fgetc(fpConcat);
if ( ferror(fpConcat) ) {
LALPrintError ( "\n IO error reading '%s'!\n\n", concatSFT);
return SFTFILEIOTESTC_ESUB;
}
/* get character from single SFT */
while (1) {
/* need to open next single SFT file */
if (fpSingle == NULL) {
/* break if we've run out of single SFTs */
if (i == numSingleSFTs)
break;
/* try to open single SFT */
if ( ( fpSingle = fopen(singleSFTs[i], "rb" ) ) == NULL ) {
LALPrintError ( "\n Cound not open SFT '%s'!\n\n", singleSFTs[i]);
return SFTFILEIOTESTC_ESUB;
}
currSingleSFT = singleSFTs[i];
}
/* get character from single SFT */
single = fgetc(fpSingle);
if ( ferror(fpSingle) ) {
LALPrintError ( "\n IO error reading '%s'!\n\n", singleSFTs[i]);
return SFTFILEIOTESTC_ESUB;
}
/* if single SFT is out of data, close it (open next one at beginning of loop) */
if (feof(fpSingle)) {
fclose(fpSingle);
fpSingle = NULL;
++i;
}
/* otherwise we have a valid character */
else
break;
}
/* do character-by-character comparison */
if ( concat != single ) {
LALPrintError ( "\n Comparison failed between '%s'(last char = %i) and '%s'(last char = %i)!!\n\n",
concatSFT, concat, currSingleSFT, single );
return SFTFILEIOTESTC_ESFTDIFF;
}
}
fclose(fpConcat);
printf( "*** Comparing was successful!!! ***\n");
}
/* write v2-SFt as a v1-SFT to disk (correct normalization) */
multsft_vect->data[0]->data[0].epoch.gpsSeconds += 60; /* shift start-time so they don't look like segmented SFTs! */
SHOULD_WORK ( LALWrite_v2SFT_to_v1file( &status, &(multsft_vect->data[0]->data[0]), "outputsftv2_v1.sft"), &status );
SUB ( LALDestroySFTVector ( &status, &sft_vect ), &status );
SUB ( LALDestroyMultiSFTVector (&status, &multsft_vect ), &status );
SUB ( LALDestroyMultiSFTVector (&status, &multsft_vect2 ), &status );
/* ----- read the previous two SFTs back */
SHOULD_FAIL ( LALSFTdataFind ( &status, &catalog, "outputsftv2_*.sft", NULL ), &status );
/* need to set proper detector! */
constraints.detector = detector;
SUB ( LALSFTdataFind ( &status, &catalog, "outputsftv2_*.sft", &constraints ), &status);
SUB ( LALLoadSFTs ( &status, &sft_vect, catalog, -1, -1 ), &status );
if ( sft_vect->length != 2 )
{
if ( lalDebugLevel ) XLALPrintError ("\nFailed to read back in 'outputsftv2_*.sft'\n\n");
return SFTFILEIOTESTC_ESUB;
}
sft_vect2 = XLALLoadSFTs ( catalog, -1, -1 );
if (!sft_vect2)
{
XLALPrintError ( "\nXLALLoadSFTs() call failed (where it should have succeeded)!\n\n");
return SFTFILEIOTESTC_ESUB;
}
/* compare the SFT vectors just read */
if(CompareSFTVectors(sft_vect, sft_vect2))
return SFTFILEIOTESTC_ESUB;
/* the data of 'outputsftv2_v2.sft' and 'outputsftv2_v1.sft' should agree, as the normalization
* should be corrected again when reading-in
*/
{
UINT4 i;
UINT4 numBins = sft_vect->data[0].data->length;
for ( i=0; i < numBins; i++)
{
COMPLEX8 *data1 = &(sft_vect->data[0].data->data[i]);
COMPLEX8 *data2 = &(sft_vect->data[1].data->data[i]);
if ( (crealf(*data1) != crealf(*data2)) || (cimagf(*data1) != cimagf(*data2)) )
{
XLALPrintError ("\nv1- and v2- SFT differ after writing/reading\n\n");
return SFTFILEIOTESTC_ESFTDIFF;
}
} /* for i < numBins */
}
SUB ( LALDestroySFTVector (&status, &sft_vect2 ), &status );
SUB ( LALDestroySFTVector (&status, &sft_vect ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
/* `----- v1 SFT writing */
/* read v1-SFTs: 'inputsft.0' and 'inputsft.1' (one is big-endian, the other little-endian!) */
SUB ( LALSFTdataFind (&status, &catalog, TEST_DATA_DIR "inputsft.?", &constraints ), &status );
SUB ( LALLoadSFTs ( &status, &sft_vect, catalog, fMin, fMax ), &status );
if ( sft_vect->length != 2 )
{
if ( lalDebugLevel ) XLALPrintError ("\nFailed to read in v1-SFTs 'inputsft.0' and 'inputsft.1'\n\n");
return SFTFILEIOTESTC_ESUB;
}
/* read with XLALLoadSFTs() */
sft_vect2 = XLALLoadSFTs ( catalog, fMin, fMax );
if (!sft_vect2)
{
XLALPrintError ( "\nXLALLoadSFTs() call failed (where it should have succeeded)!\n\n");
return SFTFILEIOTESTC_ESUB;
}
/* compare the SFT vectors just read */
if(CompareSFTVectors(sft_vect, sft_vect2))
return SFTFILEIOTESTC_ESUB;
/* write v1-SFT to disk */
SUB ( LALWriteSFTfile (&status, &(sft_vect->data[0]), "outputsft_v1.sft"), &status);
/* try to write this v1-SFTs as v2: should fail without detector-info ! */
strncpy( sft_vect->data[0].name, "??", 2 );
SHOULD_FAIL (LALWriteSFT2file( &status, &(sft_vect->data[0]), "outputsft_v2.sft", "Another v2-SFT file for testing!"), &status );
/* put detector there */
strcpy ( sft_vect->data[0].name, "H1" );
SHOULD_WORK (LALWriteSFT2file( &status, &(sft_vect->data[0]), "outputsft_v2.sft", "Another v2-SFT file for testing!"), &status );
SUB ( LALDestroySFTVector (&status, &sft_vect2 ), &status );
SUB ( LALDestroySFTVector (&status, &sft_vect ), &status );
SUB ( LALDestroySFTCatalog( &status, &catalog), &status );
/* ---------- test timestamps-reading functions by comparing LAL- and XLAL-versions against each other ---------- */
{
#define TS_FNAME "testTimestamps.dat"
LIGOTimeGPSVector *ts1 = NULL, *ts2 = NULL;
/* ----- load timestamps with deprecated LAL function */
SUB ( LALReadTimestampsFile ( &status, &ts1, TEST_DATA_DIR TS_FNAME ), &status );
/* ----- load timestamps w new XLAL function */
if ( (ts2 = XLALReadTimestampsFile ( TEST_DATA_DIR TS_FNAME )) == NULL ) {
XLALPrintError ("XLALReadTimestampsFile() failed to read timestamps from file '%s'. xlalErrno = %d\n", TS_FNAME );
return SFTFILEIOTESTC_ESUB;
}
/* ----- compare the two */
if ( ts1->length != ts2->length ) {
XLALPrintError ("Read timestamps-lists differ in length %d != %d\n", ts1->length, ts2->length );
return 1;
}
if ( ts1->deltaT != ts2->deltaT ) {
XLALPrintError ("Read timestamps-lists differ in deltaT %g != %g\n", ts1->deltaT, ts2->deltaT );
return 1;
}
UINT4 i, numTS = ts1->length;
for ( i = 0; i < numTS; i ++ )
{
if ( XLALGPSDiff( &ts1->data[i], &ts2->data[i]) != 0 ) {
XLALPrintError ("Read timestamps-lists differ in entry %d: { %d, %d } != { %d, %d }\n",
i + 1,
ts1->data[i].gpsSeconds, ts1->data[i].gpsNanoSeconds,
ts2->data[i].gpsSeconds, ts2->data[i].gpsNanoSeconds );
return 1;
}
} /* for i < numTS */
/* free mem */
XLALDestroyTimestampVector ( ts1 );
XLALDestroyTimestampVector ( ts2 );
}
/* ------------------------------ */
LALCheckMemoryLeaks();
XLALPrintError ("\n\n--------------------------------------------------------------------------------\n");
XLALPrintError ("\n OK. All tests passed correctly ! (error-messages above are OK!)\n");
XLALPrintError ("\n--------------------------------------------------------------------------------\n");
INFO( SFTFILEIOTESTC_MSGENORM );
return SFTFILEIOTESTC_ENORM;
}