Ejemplos de XPAD_XBOX360_VENDOR en C++ (Cpp)

Ejemplo n.º 1

Archivo: xpad.c Proyecto: 1111saeid/jb_kernel_3.0.16_htc_golfu

 * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
 * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
 * wireless controllers have protocol 129. */
#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 93, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }

static struct usb_device_id xpad_table [] = {
	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */
	XPAD_XBOX360_VENDOR(0x1bad),		/* Rock Band Drums */
	XPAD_XBOX360_VENDOR(0x0f0d),            /* Hori Controllers */
	{ }
};

MODULE_DEVICE_TABLE (usb, xpad_table);

struct usb_xpad {
	struct input_dev *dev;		/* input device interface */
	struct usb_device *udev;	/* usb device */

Ejemplo n.º 2

Archivo: xpad.c Proyecto: 19Dan01/linux

	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }

/* The Xbox One controller uses subclass 71 and protocol 208. */
#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 71, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOXONE_VENDOR(vend) \
	{ XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }

static struct usb_device_id xpad_table[] = {
	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft X-Box One controllers */
	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x12ab),		/* X-Box 360 dance pads */
	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */
	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA Controllers */
	XPAD_XBOX360_VENDOR(0x1532),		/* Razer Sabertooth */
	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark X-Box 360 controllers */

Ejemplo n.º 3

Archivo: xpad.c Proyecto: mjduddin/B14CKB1RD_kernel_m8

	-1
};

#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 93, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }

static struct usb_device_id xpad_table [] = {
	{ USB_INTERFACE_INFO('X', 'B', 0) },	
	XPAD_XBOX360_VENDOR(0x045e),		
	XPAD_XBOX360_VENDOR(0x046d),		
	XPAD_XBOX360_VENDOR(0x0738),		
	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */	
	XPAD_XBOX360_VENDOR(0x0e6f),		
	XPAD_XBOX360_VENDOR(0x12ab),		
	XPAD_XBOX360_VENDOR(0x1430),		
	XPAD_XBOX360_VENDOR(0x146b),		
	XPAD_XBOX360_VENDOR(0x1bad),		
	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */            
	{ }
};

MODULE_DEVICE_TABLE (usb, xpad_table);

Ejemplo n.º 4

Archivo: xpad.c Proyecto: TheDudeWithThreeHands/ubuntu-precise-lowlatency

 * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
 * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
 * wireless controllers have protocol 129. */
#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 93, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }

static struct usb_device_id xpad_table [] = {
	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x12ab),		/* X-Box 360 dance pads */
	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */
	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
	{ }
};

MODULE_DEVICE_TABLE (usb, xpad_table);

Ejemplo n.º 5

Archivo: xpad.c Proyecto: maraz/linux-2.6

 * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
 * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
 * wireless controllers have protocol 129. */
#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 93, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }

static struct usb_device_id xpad_table [] = {
	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
	{ }
};

MODULE_DEVICE_TABLE (usb, xpad_table);

struct usb_xpad {
	struct input_dev *dev;		/* input device interface */
	struct usb_device *udev;	/* usb device */

	int pad_present;

Ejemplo n.º 6

Archivo: xpad.c Proyecto: romanbb/android_kernel_lge_d851

                                                                         
                                                                           
                                           */
#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
	.idVendor = (vend), \
	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
	.bInterfaceSubClass = 93, \
	.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }

static struct usb_device_id xpad_table [] = {
	{ USB_INTERFACE_INFO('X', 'B', 0) },	/*                                 */
	XPAD_XBOX360_VENDOR(0x045e),		/*                                 */
	XPAD_XBOX360_VENDOR(0x046d),		/*                                      */
	XPAD_XBOX360_VENDOR(0x0738),		/*                                */
	XPAD_XBOX360_VENDOR(0x0e6f),		/*                              */
	XPAD_XBOX360_VENDOR(0x12ab),		/*                      */
	XPAD_XBOX360_VENDOR(0x1430),		/*                                 */
	XPAD_XBOX360_VENDOR(0x146b),		/*                                */
	XPAD_XBOX360_VENDOR(0x1bad),		/*                                     */
	XPAD_XBOX360_VENDOR(0x0f0d),            /*                  */
	{ }
};

MODULE_DEVICE_TABLE (usb, xpad_table);

struct usb_xpad {
	struct input_dev *dev;		/*                        */

Ejemplo n.º 7

Archivo: xpad.c Proyecto: linbingchen/xbox_360_gamepad_driver

#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
    .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
                   .idVendor = (vend), \
                               .bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
                                       .bInterfaceSubClass = 93, \
                                               .bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
    { XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }


//注册设备
static struct usb_device_id xpad_table[] =
{
    { USB_INTERFACE_INFO('X', 'B', 0) },    /* X-Box USB-IF not approved class */
    XPAD_XBOX360_VENDOR(0x045e),        /* Microsoft X-Box 360 controllers */
    { }
};

MODULE_DEVICE_TABLE(usb, xpad_table);

struct usb_xpad
{
    struct input_dev *dev;      //输入设备接口
    struct usb_device *udev;    //usb设备
    struct usb_interface *intf; //usb接口

    int pad_present;

    struct urb *irq_in;    //用于终端报告的urb（USB Request Blocks）
    unsigned char *idata;       //输入数据