CXTThemeManagerStyleFactory::CXTThemeManagerStyleFactory()
: m_pTheme(NULL)
, m_pNextFactory(NULL)
{
XTThemeManager()->m_factoryList.AddHead(this);
m_hostList.Construct(offsetof(CXTThemeManagerStyleHost, m_pNextHost));
}
void CMainFrame::SetTheme(int iTheme)
{
m_iTheme = iTheme;
XTThemeManager()->SetTheme((XTThemeStyle)m_iTheme);
XTPPaintManager()->SetTheme((XTPPaintTheme)m_iTheme);
RedrawWindow( NULL, NULL, RDW_INVALIDATE | RDW_UPDATENOW | RDW_ERASE | RDW_ALLCHILDREN );
RecalcLayout();
}
CXTThemeManagerStyle* CXTThemeManagerStyleFactory::GetSafeTheme()
{
if (m_pTheme == NULL)
{
m_pTheme = CreateTheme(XTThemeManager()->m_enumTheme);
}
if (m_pTheme)
{
m_pTheme->m_pFactory = this;
m_pTheme->RefreshMetrics();
}
return m_pTheme;
}
void CXTThemeManagerStyleHost::InitStyleHost(CRuntimeClass* pThemeFactoryClass)
{
ASSERT(pThemeFactoryClass);
if (!pThemeFactoryClass)
return;
ASSERT(pThemeFactoryClass->IsDerivedFrom(RUNTIME_CLASS(CXTThemeManagerStyleFactory)));
if (m_pDefaultFactory)
{
m_pDefaultFactory->m_hostList.Remove(this);
}
m_pThemeFactoryClass = pThemeFactoryClass;
m_pDefaultFactory = XTThemeManager()->GetDefaultThemeFactory(pThemeFactoryClass);
m_pDefaultFactory->m_hostList.AddHead(this);
}
CXTThemeManagerStyleFactory::~CXTThemeManagerStyleFactory()
{
SAFE_DELETE(m_pTheme);
XTThemeManager()->m_factoryList.Remove(this);
m_hostList.RemoveAll();
}
/////////////////////////////////////////////////////////////////////////////
// CSetTimeDlg message handlers
BOOL CSetTimeDlg::OnInitDialog()
{
CXTResizeDialog::OnInitDialog();
CMainFrame* pFWnd=(CMainFrame*)AfxGetMainWnd();
pFWnd->m_pSetTimeDlg=this;
SetResize(IDOK_SEND, SZ_BOTTOM_LEFT, SZ_BOTTOM_LEFT);
SetResize(IDCANCEL, SZ_BOTTOM_LEFT, SZ_BOTTOM_LEFT);
if(chcommand == 0x43) //配置测点
{
SetResize(IDC_LIST_C, SZ_TOP_LEFT, SZ_BOTTOM_CENTER);
SetResize(IDC_LIST_C2, SZ_TOP_CENTER, SZ_BOTTOM_RIGHT);
}
else
SetResize(IDC_LIST_C, SZ_TOP_LEFT, SZ_BOTTOM_RIGHT);
// Enable Office XP themes.
XTThemeManager()->SetTheme(xtThemeOffice2003);
HWND hWndHeader = m_listC.GetDlgItem(0)->GetSafeHwnd();
m_header.SubclassWindow(hWndHeader);
// add bitmap images.
m_header.SetBitmap(0, IDB_COLUMN_0, FALSE, RGB(0,255,0));
m_header.SetBitmap(1, IDB_COLUMN_1, FALSE, RGB(0,255,0));
//m_header.SetBitmap(2, IDB_COLUMN_2, FALSE, RGB(0,255,0));
// enable auto sizing.
m_header.EnableAutoSize(TRUE);
m_header.ResizeColumnsToFit();
//SortColumn(m_nSortedCol, m_bAscending);
// m_listCtrl.ModifyExtendedStyle(0, LVS_EX_FULLROWSELECT|LVS_EX_FULLROWSELECT);
m_listC.ModifyExtendedStyle(0, LVS_EX_GRIDLINES);
m_listC2.ModifyExtendedStyle(0, LVS_EX_GRIDLINES);
// insert strings into the size combo box.
if(chcommand == 0x5A) //故障闭锁
{
m_FUNCTION.AddString("关闭");
m_FUNCTION.AddString("使能");
}
else
{
m_FUNCTION.AddString("吸合");
m_FUNCTION.AddString("断开");
}
for(int i = 01; i < MAX_FDS; i++)
{
CString strItem;
strItem.Format(_T("%d"), i);
m_VERIFYT.AddString(strItem);
if(i<9)
m_PORT.AddString(strItem);
}
m_VERIFYT.SetCurSel(0);
m_PORT.SetCurSel(0);
m_FUNCTION.SetCurSel(0);
CString szConnect ;
if(chcommand == 0x54) //校时
{
GetDlgItem(IDC_STATICV1)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_STATICV2)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_COMBO_PORT)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_COMBO_FUNCTION)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_BUT_RES)->ShowWindow(SW_HIDE);;
m_listC.InsertColumn(0,"命令返回信息",LVCFMT_LEFT,450);
GetDlgItem(IDC_STATICV)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_COMBO_VERIFYT)->ShowWindow(SW_HIDE);;
}
else if(chcommand == 0x4B) //手动控制
{
m_listC.DeleteAllItems();
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);;
SetWindowText("手动控制操作");
m_listC.InsertColumn(0,"命令返回信息",LVCFMT_LEFT,450);
// m_listC.InsertColumn(1,"控制量",LVCFMT_LEFT,80);
// m_listC.InsertColumn(2,"关联量",LVCFMT_LEFT,80);
/* int xxx = 0;
int yyy = 0;
unsigned char nfds = m_VERIFYT.GetCurSel()+1;
for( int iItem = 0; iItem < 8 ; iItem++)
{
yyy = xxx;
for( int i = 0; i < 64 ; i++)
{
if(m_ADCbreakE[nfds][iItem+17][i].bFSd != 0)
{
m_listC.InsertItem(i+yyy, m_SlaveStation[nfds][iItem+17].WatchName);
m_listC.SetItemText(i+yyy, 1, m_ADCbreakE[nfds][iItem+17][i].cpoint);
m_listC.SetItemText(i+yyy, 2, m_ADCbreakE[nfds][iItem+17][i].adpoint);
xxx++;
}
}
}
m_nSecond = xxx;*/
}
else if(chcommand == 0x43) //配置测点
{
GetDlgItem(IDC_STATICV1)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_STATICV2)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_COMBO_PORT)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_COMBO_FUNCTION)->ShowWindow(SW_HIDE);;
SetWindowText("分站测点配置操作");
GetDlgItem(IDC_BUT_RES)->SetWindowText("初始化");
m_listC.InsertColumn(0,"命令返回信息",LVCFMT_LEFT,450);
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);
}
else if(chcommand == 0x41) //配置分站
{
m_SControl.Create();
m_SControl.CursorType(adOpenDynamic);
m_SControl.CacheSize(50);
m_SControl._SetRecordsetEvents(new CAccountSetEvents);
m_SControl.Open(_T("Select * From specialcontrol"), &theApp.m_Cn);
m_SControl.MarshalOptions(adMarshalModifiedOnly);
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);
SetWindowText("配置分站操作");
GetDlgItem(IDC_STATICV2)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_COMBO_FUNCTION)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_STATICV1)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_COMBO_PORT)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_COMBO_VERIFYT)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_STATICV)->ShowWindow(SW_HIDE);;
// GetDlgItem(IDC_STATICV1)->SetWindowText("串口号");
GetDlgItem(IDC_BUT_RES)->ShowWindow(SW_HIDE);;
m_listC.InsertHiddenLabelColumn(); // Requires one never uses column 0
for(int col = 0; col < 2 ; ++col)
{
CString title; int kkk;
CGridColumnTrait* pTrait = NULL;
if (col==0) // Country
{
kkk = 270;
title ="分站号";
}
if (col==1) // Year won
{
kkk = 90;
title ="串口号";
CGridColumnTraitCombo* pComboTrait = new CGridColumnTraitCombo;
pComboTrait->AddItem(0, "无配置");
for(int i = 01; i < 100; i++)
{
CString strItem,strtemp;
strItem.Format(_T("%d"), i);
pComboTrait->AddItem(i, strItem);
}
pTrait = pComboTrait;
}
m_listC.InsertColumnTrait(col+1, title, LVCFMT_LEFT, kkk, col, pTrait);
}
int iItem = 0;
m_SControl.MoveFirst();
while ( !m_SControl.IsEOF() )
{
m_listC.InsertItem(iItem, "通断");
CString dddd;
dddd.Format("%d",m_SControl.m_szSID);
m_listC.SetItemText(iItem, 1, dddd);
dddd.Format("%d",m_SControl.m_szSerialnum);
m_listC.SetItemText(iItem, 2, dddd);
iItem++;
m_SControl.MoveNext();
}
}
else if(chcommand == 0x47) //通讯测试
{
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);;
SetWindowText("通讯测试");
GetDlgItem(IDC_STATICV2)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_COMBO_FUNCTION)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_STATICV1)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_COMBO_PORT)->ShowWindow(SW_HIDE);;
GetDlgItem(IDC_BUT_RES)->ShowWindow(SW_HIDE);;
m_listC.InsertColumn(0,"命令返回信息",LVCFMT_LEFT,450);
}
else if(chcommand == 0x5A) //故障闭锁
{
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);
SetWindowText("故障闭锁配置");
GetDlgItem(IDC_STATICV1)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_COMBO_PORT)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_STATICV2)->SetWindowText("故障闭锁状态");
GetDlgItem(IDC_BUT_RES)->SetWindowText("初始化");
m_SControl.Create();
m_SControl.CursorType(adOpenDynamic);
m_SControl.CacheSize(50);
m_SControl._SetRecordsetEvents(new CAccountSetEvents);
m_SControl.Open(_T("Select * From specialcontrol"), &theApp.m_Cn);
m_SControl.MarshalOptions(adMarshalModifiedOnly);
m_listC.InsertColumn(0,"分站号",LVCFMT_LEFT,300);
m_listC.InsertColumn(1,"故障闭锁状态",LVCFMT_LEFT,120);
int iItem = 0;
m_SControl.MoveFirst();
while ( !m_SControl.IsEOF() )
{
CString dddd;
dddd.Format("%d",m_SControl.m_szSID);
m_listC.InsertItem(iItem, dddd);
if(m_SControl.m_szSpeCtrol)
m_listC.SetItemText(iItem, 1, "使能");
else
m_listC.SetItemText(iItem, 1, "关闭");
iItem++;
m_SControl.MoveNext();
}
m_nSecond = 64;
}
else if(chcommand == 0x46) //风电瓦斯闭锁
{
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);
SetWindowText("风电瓦斯闭锁配置");
GetDlgItem(IDC_STATICV1)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_COMBO_PORT)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_STATICV2)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_COMBO_FUNCTION)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_BUT_RES)->SetWindowText("初始化");
InitWGas(0);
}
else if(chcommand == 0xf0) //双风门、主扇备扇报警
{
m_Records1.clear();
m_Records2.clear();
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);
SetWindowText("双设备报警逻辑管理");
GetDlgItem(IDOK_SEND)->SetWindowText("添加");
GetDlgItem(IDC_BUT_RES)->SetWindowText("删除");
GetDlgItem(IDC_STATICV1)->SetWindowText("开关量1");
GetDlgItem(IDC_STATICV2)->SetWindowText("开关量2");
GetDlgItem(IDC_STATICV)->SetWindowText(_T("报警态"));
// GetDlgItem(IDC_COMBO_VERIFYT)->ShowWindow(SW_HIDE);
m_PORT.ResetContent();
m_FUNCTION.ResetContent();
m_VERIFYT.ResetContent();
m_VERIFYT.AddString(_T("0态"));
m_VERIFYT.AddString(_T("1态"));
m_VERIFYT.SetCurSel(0);
m_Fans.Create();
m_Fans.CursorType(adOpenDynamic);
m_Fans.CacheSize(50);
m_Fans._SetRecordsetEvents(new CAccountSetEvents);
m_Fans.Open(_T("Select * From fanscon"), &theApp.m_Cn);
m_Fans.MarshalOptions(adMarshalModifiedOnly);
int ptype; CString dddd;
for(int i = 1; i < MAX_FDS;i++ )
{
for(int j = 0; j < MAX_CHAN;j++ )
{
ptype = m_SlaveStation[i][j].ptype;
if((ptype == 10 || ptype == 13 ||ptype == 14) && m_SlaveStation[i][j].WatchName !="")
{
dddd = m_SlaveStation[i][j].strPN + "|"+m_SlaveStation[i][j].WatchName;
m_PORT.AddString(dddd);
m_FUNCTION.AddString(dddd);
}
}
}
m_PORT.SetCurSel(0);
m_FUNCTION.SetCurSel(0);
m_listC.InsertColumn(0,"开关量1",LVCFMT_LEFT,60);
m_listC.InsertColumn(1,"安装地点/名称1",LVCFMT_LEFT,200);
m_listC.InsertColumn(2,"开关量2",LVCFMT_LEFT,60);
m_listC.InsertColumn(3,"安装地点/名称2",LVCFMT_LEFT,200);
m_listC.InsertColumn(4,"报警状态",LVCFMT_LEFT,60);
// m_listC.InsertColumn(5,"ID",LVCFMT_LEFT,30);
int iItem = 0;
m_Fans.MoveFirst();
while ( !m_Fans.IsEOF() )
{
CString dddd = m_Fans.m_szpointnum1;
dddd.TrimRight();
m_listC.InsertItem(iItem, dddd);
m_Records1.push_back(dddd);
dddd = m_Fans.m_szName1;
dddd.TrimRight();
m_listC.SetItemText(iItem, 1, dddd);
dddd = m_Fans.m_szpointnum2;
dddd.TrimRight();
m_listC.SetItemText(iItem, 2, dddd);
m_Records2.push_back(dddd);
dddd = m_Fans.m_szName2;
dddd.TrimRight();
m_listC.SetItemText(iItem, 3, dddd);
dddd.Format(_T("%d态"), m_Fans.m_szAStatus);
m_listC.SetItemText(iItem, 4, dddd);
m_nSecond = m_Fans.m_szFansID+1;
// dddd.Format(_T("%d"), m_nSecond-1);
// m_listC.SetItemText(iItem, 5, dddd);
iItem++;
m_Fans.MoveNext();
}
}
else if(chcommand == 0xf1) //数据显示页属性
{
m_Records1.clear();
GetDlgItem(IDC_LIST_C2)->ShowWindow(SW_HIDE);
SetWindowText("数据显示页属性");
GetDlgItem(IDOK_SEND)->SetWindowText("保存");
GetDlgItem(IDC_BUT_RES)->ShowWindow(SW_HIDE);
GetDlgItem(IDC_STATICV1)->SetWindowText("文件名");
GetDlgItem(IDC_STATICV2)->SetWindowText("列表");
GetDlgItem(IDC_STATICV)->SetWindowText(_T("存表"));
GetDlgItem(IDC_COMBO_VERIFYT)->EnableWindow(FALSE);
CString strPointNo,cccc,strrsy,strrsy1;
strrsy = gstrTimeOut + "\\" + strMetrics+ "rsy\\";
m_PORT.ResetContent();
m_FUNCTION.ResetContent();
m_VERIFYT.ResetContent();
for(int i =0; i < theApp.m_addfilesy.size() ;i++)
{
strPointNo = theApp.m_addfilesy[i];
int m_ishave = strPointNo.GetLength();
cccc = strPointNo.Mid(m_ishave-3,3);
strPointNo.Replace(strrsy,"");
if(cccc =="rsf")
{
m_Records1.push_back(strPointNo);
m_PORT.AddString(strPointNo);
}
}
// m_VERIFYT.SetCurSel(0);
for(int k =1; k < 4 ;k++)
{
cccc.Format("%d",k);
m_FUNCTION.AddString(cccc);
m_FUNCTION.SetCurSel(0);
}
// Give better margin to editors
m_listC.SetCellMargin(1.2);
CGridRowTraitXP* pRowTrait = new CGridRowTraitXP;
m_listC.SetDefaultRowTrait(pRowTrait);
// Create Columns
m_listC.InsertHiddenLabelColumn(); // Requires one never uses column 0
for(int col = 0; col < 2 ; ++col)
{
CString title; int kkk;
CGridColumnTrait* pTrait = NULL;
if (col==0) // Country
{
kkk = 350;
title ="数据显示页属性";
}
if (col==1) // City
{
kkk = 100;
title ="参数(整数)";
pTrait = new CGridColumnTraitEdit;
}
m_listC.InsertColumnTrait(col+1, title, LVCFMT_LEFT, kkk, col, pTrait);
}
CString strl[35];
// strl[0] = "是否可见(1可见|0隐藏)"; strl[1] = "子类头控制(1或0)";
// strl[2] = "列表左上顶点x坐标";
// strl[3] = "列表宽度"; strl[4] = "列表高度"; strl[5] = "第一列名字";
// strl[6] = "第一列宽度"; strl[7] = "第二列名字"; strl[8] = "第二列宽度";
// strl[9] = "第三列名字"; strl[10] = "第三列宽度"; strl[11] = "行数";
strl[0] = "是否可见(1可见|0隐藏)"; strl[1] = "子类头控制(1或0)";
strl[2] = "列表左上顶点x坐标";
strl[3] = "列表宽度"; strl[4] = "列表高度"; strl[5] = "第一列宽度";
strl[6] = "第二列宽度";
strl[7] = "第三列宽度"; //strl[8] = "行数";
strl[8] = "最大值列宽度"; strl[9] = "最小值列宽度"; strl[10] = "平均值列宽度";
strl[11] = "断电值列宽度"; strl[12] = "复电值列宽度"; strl[13] = "报警上限列宽度";
strl[14] = "报警下限列宽度"; strl[15] = "量程高值列宽度"; strl[16] = "量程低值列宽度";
strl[17] = "断电时刻列宽度"; strl[18] = "复电时刻列宽度"; strl[19] = "报警时刻列宽度";
strl[20] = "馈电状态及时刻列宽度"; strl[21] = "断电范围列宽度"; strl[22] = "开停次数列宽度";
strl[23] = "工作时间列宽度";
for( k =0; k < 22 ;k++)
{
m_listC.InsertItem(k, "通断");
m_listC.SetItemText(k, 1, strl[k]);
m_listC.SetItemText(k, 2, "");
}
}
return TRUE; // return TRUE unless you set the focus to a control
// EXCEPTION: OCX Property Pages should return FALSE
}
