void eventBindReq(osal_event_hdr_t * hdrEvent) {
uint8 first=0;
struct BindTableRequestMsg * msg = (struct BindTableRequestMsg *)hdrEvent;
//usbLog(0,"Request bind table for %X", msg->afAddrType.addr.shortAddr);
ZDP_MgmtBindReq( &(msg->afAddrType),first, 0 );
}
/*********************************************************************
* @fn MT_ZdoCommandProcessing
*
* @brief
*
* Process all the ZDO commands that are issued by test tool
*
* @param cmd_id - Command ID
* @param len - Length of received SPI data message
* @param pData - pointer to received SPI data message
*
* @return void
*/
void MT_ZdoCommandProcessing( uint16 cmd_id , byte len , byte *pData )
{
byte i;
byte x;
byte ret;
byte attr;
byte attr1;
uint16 cID;
uint16 shortAddr;
uint16 uAttr;
byte *ptr;
byte *ptr1;
zAddrType_t devAddr;
zAddrType_t dstAddr;
byte respLen;
#if defined ( ZDO_MGMT_NWKDISC_REQUEST )
uint32 scanChans;
#endif
#if defined ( ZDO_USERDESCSET_REQUEST )
UserDescriptorFormat_t userDesc;
#endif
ret = UNSUPPORTED_COMMAND;
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_ZDO_DEFAULT;
respLen = SPI_RESP_LEN_ZDO_DEFAULT;
switch (cmd_id)
{
case SPI_CMD_ZDO_AUTO_ENDDEVICEBIND_REQ:
i = *pData; // Get the endpoint/interface
ZDApp_SendEndDeviceBindReq( i );
//Since function type is void, report a succesful operation to the test tool
ret = ZSUCCESS;
break;
case SPI_CMD_ZDO_AUTO_FIND_DESTINATION_REQ:
i = *pData; // Get the endpoint/interface
ZDApp_AutoFindDestination( i );
//Since function type is void, report a succesful operation to the test tool
ret = ZSUCCESS;
break;
#if defined ( ZDO_NWKADDR_REQUEST )
case SPI_CMD_ZDO_NWK_ADDR_REQ:
// Copy and flip incoming 64-bit address
pData = zdo_MT_MakeExtAddr( &devAddr, pData );
ptr = (byte*)&devAddr.addr.extAddr;
attr = *pData++; // RequestType
attr1 = *pData++; // StartIndex
x = *pData;
ret = (byte)ZDP_NwkAddrReq( ptr, attr, attr1, x );
break;
#endif
#if defined ( ZDO_IEEEADDR_REQUEST )
case SPI_CMD_ZDO_IEEE_ADDR_REQ:
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += sizeof( shortAddr );
attr = *pData++; // RequestType
attr1 = *pData++; // StartIndex
x = *pData; // SecuritySuite
ret = (byte)ZDP_IEEEAddrReq( shortAddr, attr, attr1, x );
break;
#endif
#if defined ( ZDO_NODEDESC_REQUEST )
case SPI_CMD_ZDO_NODE_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData;
ret = (byte)ZDP_NodeDescReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_POWERDESC_REQUEST )
case SPI_CMD_ZDO_POWER_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData;
ret = (byte)ZDP_PowerDescReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_SIMPLEDESC_REQUEST )
case SPI_CMD_ZDO_SIMPLE_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData++; // endpoint/interface
attr1 = *pData; // SecuritySuite
ret = (byte)ZDP_SimpleDescReq( &devAddr, shortAddr, attr, attr1 );
break;
#endif
#if defined ( ZDO_ACTIVEEP_REQUEST )
case SPI_CMD_ZDO_ACTIVE_EPINT_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData; // SecuritySuite
ret = (byte)ZDP_ActiveEPReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_MATCH_REQUEST )
case SPI_CMD_ZDO_MATCH_DESC_REQ:
{
uint16 inC[16], outC[16];
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
uAttr = BUILD_UINT16( pData[1], pData[0] ); // Profile ID
pData += 2;
attr = *pData++; // NumInClusters
for (i=0; i<16; ++i) {
inC[i] = BUILD_UINT16(pData[1], pData[0]);
pData += 2;
}
attr1 = *pData++; // NumOutClusters
for (i=0; i<16; ++i) {
outC[i] = BUILD_UINT16(pData[1], pData[0]);
pData += 2;
}
i = *pData; // SecuritySuite
ret = (byte)ZDP_MatchDescReq( &devAddr, shortAddr, uAttr,
attr, inC, attr1, outC, i );
}
break;
#endif
#if defined ( ZDO_COMPLEXDESC_REQUEST )
case SPI_CMD_ZDO_COMPLEX_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData; // SecuritySuite
ret = (byte)ZDP_ComplexDescReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_USERDESC_REQUEST )
case SPI_CMD_ZDO_USER_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData; // SecuritySuite
ret = (byte)ZDP_UserDescReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_ENDDEVICEBIND_REQUEST )
case SPI_CMD_ZDO_END_DEV_BIND_REQ:
//TODO: When ZTool supports 16 bits the code below will need to take it into account
{
uint16 inC[16], outC[16];
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
x = *pData++; // EPInt
uAttr = BUILD_UINT16( pData[1], pData[0] ); // Profile ID
pData += 2;
attr = *pData++; // NumInClusters
for (i=0; i<16; ++i) {
inC[i] = BUILD_UINT16(pData[1], pData[0]);
pData += 2;
}
attr1 = *pData++; // NumOutClusters
for (i=0; i<16; ++i) {
outC[i] = BUILD_UINT16(pData[1], pData[0]);
pData += 2;
}
i = *pData; // SecuritySuite
ret = (byte)ZDP_EndDeviceBindReq( &devAddr, shortAddr, x, uAttr,
attr, inC, attr1, outC, i );
}
break;
#endif
#if defined ( ZDO_BIND_UNBIND_REQUEST )
case SPI_CMD_ZDO_BIND_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
ptr = pData; // SrcAddress
pData += Z_EXTADDR_LEN;
attr = *pData++; // SrcEPInt
cID = BUILD_UINT16( pData[1], pData[0]); // ClusterID
pData += 2;
dstAddr.addrMode = *pData++;
if ( NLME_GetProtocolVersion() == ZB_PROT_V1_0 )
dstAddr.addrMode = Addr64Bit;
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
if ( dstAddr.addrMode == Addr64Bit )
{
ptr1 = pData; // DstAddress
osal_cpyExtAddr( dstAddr.addr.extAddr, ptr1 );
}
else
{
dstAddr.addr.shortAddr = BUILD_UINT16( pData[0], pData[1] );
}
// The short address occupies lsb two bytes
pData += Z_EXTADDR_LEN;
attr1 = *pData++; // DstEPInt
x = *pData; // SecuritySuite
#if defined ( REFLECTOR )
if ( devAddr.addr.shortAddr == _NIB.nwkDevAddress )
{
ZDApp_BindReqCB( 0, &devAddr, ptr, attr, cID, &dstAddr, attr1, x );
ret = ZSuccess;
}
else
#endif
ret = (byte)ZDP_BindReq( &devAddr, ptr, attr, cID, &dstAddr, attr1, x );
break;
#endif
#if defined ( ZDO_BIND_UNBIND_REQUEST )
case SPI_CMD_ZDO_UNBIND_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
ptr = pData; // SrcAddress
pData += Z_EXTADDR_LEN;
attr = *pData++; // SrcEPInt
cID = BUILD_UINT16( pData[1], pData[0]); // ClusterID
pData += 2;
dstAddr.addrMode = *pData++;
if ( NLME_GetProtocolVersion() == ZB_PROT_V1_0 )
dstAddr.addrMode = Addr64Bit;
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
if ( dstAddr.addrMode == Addr64Bit )
{
ptr1 = pData; // DstAddress
osal_cpyExtAddr( dstAddr.addr.extAddr, ptr1 );
}
else
{
dstAddr.addr.shortAddr = BUILD_UINT16( pData[0], pData[1] );
}
pData += Z_EXTADDR_LEN;
attr1 = *pData++; // DstEPInt
x = *pData; // SecuritySuite
#if defined ( REFLECTOR )
if ( devAddr.addr.shortAddr == _NIB.nwkDevAddress )
{
ZDApp_UnbindReqCB( 0, &devAddr, ptr, attr, cID, &dstAddr, attr1, x );
ret = ZSuccess;
}
else
#endif
{
ret = (byte)ZDP_UnbindReq( &devAddr, ptr, attr, cID, &dstAddr, attr1, x );
}
break;
#endif
#if defined ( ZDO_MGMT_NWKDISC_REQUEST )
case SPI_CMD_ZDO_MGMT_NWKDISC_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
scanChans = BUILD_UINT32( pData[3], pData[2], pData[1], pData[0] );
ret = (byte)ZDP_MgmtNwkDiscReq( &devAddr, scanChans, pData[4], pData[5], false );
break;
#endif
#if defined ( ZDO_MGMT_LQI_REQUEST )
case SPI_CMD_ZDO_MGMT_LQI_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
ret = (byte)ZDP_MgmtLqiReq( &devAddr, pData[2], false );
break;
#endif
#if defined ( ZDO_MGMT_RTG_REQUEST )
case SPI_CMD_ZDO_MGMT_RTG_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
ret = (byte)ZDP_MgmtRtgReq( &devAddr, pData[2], false );
break;
#endif
#if defined ( ZDO_MGMT_BIND_REQUEST )
case SPI_CMD_ZDO_MGMT_BIND_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
ret = (byte)ZDP_MgmtBindReq( &devAddr, pData[2], false );
break;
#endif
#if defined ( ZDO_MGMT_JOINDIRECT_REQUEST )
case SPI_CMD_ZDO_MGMT_DIRECT_JOIN_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
MT_ReverseBytes( &pData[2], Z_EXTADDR_LEN );
ret = (byte)ZDP_MgmtDirectJoinReq( &devAddr,
&pData[2],
pData[2 + Z_EXTADDR_LEN],
false );
break;
#endif
#if defined ( ZDO_MGMT_LEAVE_REQUEST )
case SPI_CMD_ZDO_MGMT_LEAVE_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
MT_ReverseBytes( &pData[2], Z_EXTADDR_LEN );
ret = (byte)ZDP_MgmtLeaveReq( &devAddr, &pData[2], false );
break;
#endif
#if defined ( ZDO_MGMT_PERMIT_JOIN_REQUEST )
case SPI_CMD_ZDO_MGMT_PERMIT_JOIN_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
ret = (byte)ZDP_MgmtPermitJoinReq( &devAddr, pData[2], pData[3], false );
break;
#endif
#if defined ( ZDO_USERDESCSET_REQUEST )
case SPI_CMD_ZDO_USER_DESC_SET:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// User descriptor
userDesc.len = *pData++;
osal_memcpy( userDesc.desc, pData, userDesc.len );
pData += 16; // len of user desc
ret =(byte)ZDP_UserDescSet( &devAddr, shortAddr, &userDesc, pData[0] );
break;
#endif
#if defined ( ZDO_ENDDEVICE_ANNCE_REQUEST )
case SPI_CMD_ZDO_END_DEV_ANNCE:
// network address
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// extended address
ptr = pData;
MT_ReverseBytes( ptr, Z_EXTADDR_LEN );
pData += Z_EXTADDR_LEN;
// security
attr = *pData++;
ret = (byte)ZDP_EndDeviceAnnce( shortAddr, ptr, *pData, attr );
break;
#endif
#if defined (ZDO_SERVERDISC_REQUEST )
case SPI_CMD_ZDO_SERVERDISC_REQ:
// Service Mask
uAttr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData++; // Security suite
ret = (byte) ZDP_ServerDiscReq( uAttr, attr );
break;
#endif
#if defined (ZDO_NETWORKSTART_REQUEST )
case SPI_CMD_ZDO_NETWORK_START_REQ:
ret = ZDApp_StartUpFromApp( ZDAPP_STARTUP_AUTO );
break;
#endif
default:
break;
}
MT_SendSPIRespMsg( ret, cmd_id, len, respLen );
}