Ejemplo n.º 1
0
name    *StReturn( an retval, type_def *tipe, instruction **pins )
/****************************************************************/
{
    name        *retp;
    name        *ptr;
    name        *off;
    name        *seg;
    hw_reg_set  reg;

    if( CurrProc->state.attr & ROUTINE_ALLOCS_RETURN ) {
        retp = CurrProc->targ.return_points;
        AddIns( MakeUnary( OP_LA, retp, AllocRegName( CurrProc->state.return_reg ), WD ) );
        *pins = NULL;
    } else {
        if( _IsTargetModel( FLOATING_SS ) || _IsTargetModel( FLOATING_DS ) ) {
            ptr = AllocTemp( CP );
            off = OffsetPart( ptr );
            seg = SegmentPart( ptr );
            AddIns( MakeMove( AllocRegName( HW_SS ), seg, U2 ) );
        } else {
            ptr = AllocTemp( WD );
            off = ptr;
        }
        AddIns( MakeMove( CurrProc->targ.return_points, off, WD ) );
        retp = SAllocIndex( ptr, NULL, 0, TypeClass( retval->tipe ), tipe->length );
        reg = ReturnReg( WD, false );
        *pins = MakeMove( CurrProc->targ.return_points, AllocRegName( reg ), WD );
        CurrProc->state.return_reg = reg;
    }
    return( retp );
}
Ejemplo n.º 2
0
extern  char    *AskRTName( rt_class rtindex )
/********************************************/
{
    if( _IsTargetModel( INDEXED_GLOBALS ) ) {
        switch( rtindex ) {
        case RT_FDA:
            return( "__FXA" );
        case RT_FDS:
            return( "__FXS" );
        case RT_FDM:
            return( "__FXM" );
        case RT_FDD:
            return( "__FXD" );
        case RT_FDC:
            return( "__FXC" );
        case RT_DPOW:
            return( "RT@XPOW" );
        case RT_DATAN2:
            return( "IF@XATAN2" );
        case RT_DFMOD:
            return( "IF@XFMOD" );
        }
    }
    return( RTInfo[rtindex].nam );
}
Ejemplo n.º 3
0
static void OpndSizeIf( bool if_32 )
/**********************************/
{
    if( ( if_32 && _IsTargetModel( USE_32 ) ) || _IsntTargetModel( USE_32 ) ) {
        AddToTemp( M_OPND_SIZE );
    }
}
Ejemplo n.º 4
0
static void OpndSizeIf( void )
/****************************/
{
    if( _IsTargetModel( USE_32 ) ) {
        AddToTemp( M_OPND_SIZE );
    }
}
Ejemplo n.º 5
0
static  name    *GetTLSDataRef( instruction *ins, name *op, type_class_def tipe )
/*******************************************************************************/
{
    if( _IsTargetModel( GENERIC_TLS ) ) {
        return( GetNTTLSDataRef( ins, op, tipe ) );
    } else {
        return( GetGenericTLSDataRef( ins, op, tipe ) );
    }
}
Ejemplo n.º 6
0
static void TakeUpSlack( type_length size )
/*****************************************/
{
    for( ; size >= 2; size -= 2 ) {
        if( _IsTargetModel( USE_32 ) )
            AddByte( M_OPND_SIZE );
        AddByte( M_MOVSW );
    }
    for( ; size >= 1; --size ) {
        AddByte( M_MOVSB );
    }
}
Ejemplo n.º 7
0
void            InitRegTbl( void )
/*********************************
    Initialize the tables.
*/
{
    if( _FPULevel( FPU_87 ) ) {
        HW_CAsgn( STParmReg[Max87Stk], HW_EMPTY );
    }
    if( _IsTargetModel( INDEXED_GLOBALS ) ) {
        HW_CAsgn( FPParm2Reg[0], HW_ECX_ESI );
    } else {
        HW_CAsgn( FPParm2Reg[0], HW_ECX_EBX );
    }
}
Ejemplo n.º 8
0
extern  void    DFGenStatic( cg_sym_handle sym, dbg_loc loc ) {
/*******************************************************************/
    uint            flags;
    fe_attr         attr;
    const char      *name;
    dw_loc_handle   dw_loc;
    dw_loc_handle   dw_segloc;
    dw_handle       obj;
    dbg_type        dbtype;

    attr = FEAttr( sym );
    if( attr & FE_GLOBAL ){
        flags = DW_FLAG_GLOBAL;
    }else{
        flags = 0;
    }
    name = FEName( sym );
    if( attr & FE_STATIC ){
#if _TARGET & ( _TARG_IAPX86 | _TARG_80386 )
        if( _IsTargetModel( FLAT_MODEL ) ) {
            dw_segloc = NULL;
        }else{
            dw_segloc = SegLoc( sym );
        }
#else
        dw_segloc = NULL;
#endif
    }else{
        dw_segloc = NULL;
    }
    dbtype = FEDbgType( sym ); /* causes name side effects */
    dw_loc = DBGLoc2DF( loc );
    obj = DWVariable( Client, dbtype, dw_loc,
                0, dw_segloc, name, 0, flags );
    if( attr &  FE_GLOBAL ){
        name = FEName( sym );
        DWPubname( Client, obj, name );
    }
    if( dw_loc != NULL ){
        DWLocTrash( Client, dw_loc );
    }
    if( dw_segloc != NULL ){
        DWLocTrash( Client, dw_segloc );
    }
}
Ejemplo n.º 9
0
static  void    AddCall( instruction *ins, cn call ) {
/****************************************************/

    name        *proc_name;

    if( _IsTargetModel(FLOATING_DS) && (call->state->attr&ROUTINE_NEEDS_DS_LOADED) ) {
        AddIns( MakeMove( NearSegment(), AllocRegName( HW_DS ), U2 ) );
    }
    if( call->name->tipe == TypeProcParm ) {
        proc_name = AllocTemp( ClassPointer );
/* what to do?        proc_name->usage |= USE_REGISTER;*/
        AddIns( MakeMove( ins->operands[CALL_OP_ADDR], proc_name, ClassPointer ));
        ins->operands[CALL_OP_ADDR] = proc_name;
        SetDisplay( GenIns( call->name ) );
        AddIns( ins );
        SaveDisplay( OP_POP );
    } else {
        AddCallIns( ins, call );
    }
}
Ejemplo n.º 10
0
extern void     DFLineNum( cue_state *state, offset lc ) {
    /*******************************************************/
    char *fname;

    if( NeedBaseSet() ) {
        back_handle bck;

        bck = MakeLabel();
        OutLabel( bck->lbl );
        DWLineAddr( Client, (dw_sym_handle)bck, lc );
#if _TARGET & ( _TARG_IAPX86 | _TARG_80386 )
        if( !_IsTargetModel( FLAT_MODEL ) ) {
            DWLineSeg( Client, (dw_sym_handle)bck );
        }
#endif
        BEFreeBack( bck );
    }
    if( state->fno != CurrFNo ) {
        fname = SrcFNoFind( state->fno );
        DWSetFile( Client, fname );
        CurrFNo = state->fno;
    }
    DWLineNum( Client, DW_LN_STMT, state->line, state->col, lc );
}
Ejemplo n.º 11
0
an      BGCall( cn call, bool use_return, bool in_line )
/******************************************************/
{
    instruction         *call_ins;
    call_state          *state;
    name                *ret_ptr = NULL;
    name                *result;
    name                *temp;
    name                *reg_name;
    instruction         *ret_ins = NULL;
    hw_reg_set          return_reg;
    hw_reg_set          zap_reg;

    if( call->name->tipe == TypeProcParm ) {
        SaveDisplay( OP_PUSH );
    }

    state = call->state;
    result = BGNewTemp( call->tipe );
    call_ins = call->ins;

/*   If we have a return value that won't fit in a register*/
/*   pass a pointer to result as the first parm*/

    if( call_ins->type_class == XX ) {
        if( _RoutineIsFar16( state->attr ) ) {
            if( state->attr & ROUTINE_ALLOCS_RETURN ) {
                HW_CAsgn( state->return_reg, HW_EAX );
            } else {
                HW_CAsgn( state->return_reg, HW_EBX );
            }
        }
        if( ( state->attr & ROUTINE_ALLOCS_RETURN ) == 0 ) {
            if( HW_CEqual( state->return_reg, HW_EMPTY ) ) {
                ret_ptr = AllocTemp( WD );
            } else {
                ret_ptr = AllocRegName( state->return_reg );
            }
            ret_ins = MakeUnary( OP_LA, result, ret_ptr, WD );
            HW_TurnOn( state->parm.used, state->return_reg );
            call_ins->flags.call_flags |= CALL_RETURNS_STRUCT;
        }
    }
    if( _IsTargetModel(FLOATING_DS) && (state->attr&ROUTINE_NEEDS_DS_LOADED) ) {
        HW_CTurnOn( state->parm.used, HW_DS );
    }
    if( _RoutineIsFar16( state->attr ) ) {
#if _TARGET & _TARG_80386
        Far16Parms( call );
#endif
    } else {
        if( AssgnParms( call, in_line ) ) {
            if( state->attr & ROUTINE_REMOVES_PARMS ) {
                call_ins->flags.call_flags |= CALL_POPS_PARMS;
            }
        }
    }

    if( state->attr & (ROUTINE_MODIFIES_NO_MEMORY | ROUTINE_NEVER_RETURNS) ) {
        /* a routine that never returns can not write any memory as far
            as this routine is concerned */
        call_ins->flags.call_flags |= CALL_WRITES_NO_MEMORY;
    }
    if( state->attr & ROUTINE_READS_NO_MEMORY ) {
        call_ins->flags.call_flags |= CALL_READS_NO_MEMORY;
    }
    if( state->attr & ROUTINE_NEVER_RETURNS ) {
        call_ins->flags.call_flags |= CALL_ABORTS;
    }
    if( _RoutineIsInterrupt( state->attr ) ) {
        call_ins->flags.call_flags |= CALL_INTERRUPT | CALL_POPS_PARMS;
    }
    if( !use_return ) {
        call_ins->flags.call_flags |= CALL_IGNORES_RETURN;
    }
    if( call_ins->type_class == XX ) {
        reg_name = AllocRegName( state->return_reg );
        if( state->attr & ROUTINE_ALLOCS_RETURN ) {
            call_ins->result = reg_name;
            AddCall( call_ins, call );
            if( use_return ) {
                temp = AllocTemp( WD ); /* assume near pointer*/
                AddIns( MakeMove( reg_name, temp, WD ) );
                temp = SAllocIndex( temp, NULL, 0,
                                    result->n.type_class, call->tipe->length );
                AddIns( MakeMove( temp, result, result->n.type_class ) );
            }
        } else {
            call_ins->result = result;
            AddIns( ret_ins );
            if( HW_CEqual( state->return_reg, HW_EMPTY ) ) {
                AddIns( MakeUnary( OP_PUSH, ret_ptr, NULL, WD ) );
                state->parm.offset += TypeClassSize[WD];
                call_ins->operands[CALL_OP_POPS] =
                        AllocS32Const( call_ins->operands[CALL_OP_POPS]->c.lo.int_value + TypeClassSize[WD] );
                if( state->attr & ROUTINE_REMOVES_PARMS ) {
                    call_ins->flags.call_flags |= CALL_POPS_PARMS;
                }
            }
            AddCall( call_ins, call );
        }
    } else {
        return_reg = state->return_reg;
        zap_reg = call_ins->zap->reg;
        HW_CTurnOn( zap_reg, HW_FLTS );
        HW_OnlyOn( return_reg, zap_reg );
        call_ins->result = AllocRegName( return_reg );
        reg_name = AllocRegName( state->return_reg );
        AddCall( call_ins, call );
        if( use_return ) {
            ret_ins = MakeMove( reg_name, result, result->n.type_class );
            if( HW_COvlap( reg_name->r.reg, HW_FLTS ) ) {
                ret_ins->stk_entry = 1;
                ret_ins->stk_exit = 0;
            }
            AddIns( ret_ins );
        }
    }
    if( state->parm.offset != 0 && ( state->attr & ROUTINE_REMOVES_PARMS ) == 0 ) {
        reg_name = AllocRegName( HW_SP );
        AddIns( MakeBinary( OP_ADD, reg_name,
                AllocS32Const( state->parm.offset ), reg_name, WD ) );
    }
    return( MakeTempAddr( result ) );
}
Ejemplo n.º 12
0
extern  void    DFObjLineInitDbgInfo( void ) {
/*****************************************************/
/* called by objinit to init segments and dwarf writing library */
    static const dw_funcs cli_funcs = {
        CLIReloc,
        CLIWrite,
        CLISeek,
        CLITell,
        CLIAlloc,
        CLIFree
    };
    dw_init_info    info;
    dw_cu_info      cu;
    type_def       *tipe_addr;

    info.language = DWLANG_C;
    info.compiler_options = DW_CM_DEBUGGER;
    info.abbrev_sym = 0;
    info.producer_name = SetDwarfProducer();
    info.language = SetLang();
    if( setjmp( info.exception_handler ) == 0 ) {
        info.funcs = cli_funcs;
        InitLineSegBck(); // start each seg with a ref label
        Client = DWInit( &info );
        if( Client == NULL ) {
            Zoiks( ZOIKS_107 ); /* Bad */
        }
        cu.source_filename = FEAuxInfo( NULL, SOURCE_NAME );
        cu.directory = "";
        cu.dbg_pch = NULL;
        cu.inc_list = NULL;
        cu.inc_list_len = 0;
#if _TARGET & ( _TARG_IAPX86 | _TARG_80386 )
        if( _IsTargetModel( FLAT_MODEL ) ) {
            cu.flags = true;
            cu.segment_size = 0;
        }else{
            cu.flags = false;
            cu.segment_size = 2;
        }
#else
        cu.flags = true;
        cu.segment_size = 0;
#endif
        tipe_addr = TypeAddress( TY_NEAR_POINTER );
        cu.offset_size = tipe_addr->length;
        switch( GetMemModel() ){
            case 'h':
                cu.model = DW_MODEL_HUGE;
                break;
            case 'l':
                cu.model = DW_MODEL_LARGE;
                break;
            case 'f':
                cu.model = DW_MODEL_FLAT;
                break;
            case 's':
                cu.model = DW_MODEL_SMALL;
                break;
            default:
                cu.model = DW_MODEL_NONE;
                break;
        }
        DWInitDebugLine( Client, &cu );
    } else {
        Zoiks( ZOIKS_107 ); /* Big Error */
    }
}
Ejemplo n.º 13
0
extern  void    DFBegCCU( segment_id code, dw_sym_handle dbg_pch )
/****************************************************************/
// Call when codeseg hase been defined
{
    dw_cu_info      cu;
    back_handle     bck;
    segment_id      old;
    type_def        *tipe_addr;

    if( _IsntModel( DBG_LOCALS | DBG_TYPES ) ) {
        return;
    }
    if( CcuDef ) {
        cu.source_filename = FEAuxInfo( NULL, SOURCE_NAME );
        cu.directory = "";
        cu.dbg_pch = dbg_pch;
        cu.inc_list = NULL;
        cu.inc_list_len = 0;
        old = SetOP( code );
#if _TARGET & ( _TARG_IAPX86 | _TARG_80386 )
        if( _IsTargetModel( FLAT_MODEL ) ) {
            bck = MakeLabel();
            OutLabel( bck->lbl );
            Pc_Low = bck;
            Pc_High = MakeLabel();
            // Emitting DW_AT_low_pc and DW_AT_high_pc is valid *only* if the
            // compilation unit's code is in a single contiguous block (see
            // DWARF 2, section 3.1).
            // I don't know how to find out at the time of this call if there's
            // only one code segment or not, hence these attributes are always
            // disabled. The low/high pc attribs should probably be handled by
            // the linker.
            cu.flags = false;
            cu.segment_size = 0;
        } else {
            bck = NULL;
            cu.flags = false;
            Pc_Low = NULL;
            Pc_High = NULL;
            cu.segment_size = 2;
        }
#else
        bck = MakeLabel();
        OutLabel( bck->lbl );
        Pc_Low = bck;
        Pc_High = MakeLabel();
        cu.flags = true;
        cu.segment_size = 0;
#endif
        SetOP( old );
        Comp_High = Pc_High;
        tipe_addr = TypeAddress( TY_NEAR_POINTER );
        cu.offset_size = tipe_addr->length;
        switch( GetMemModel() ) {
            case 'h':
                cu.model = DW_MODEL_HUGE;
                break;
            case 'l':
                cu.model = DW_MODEL_LARGE;
                break;
            case 'f':
                cu.model = DW_MODEL_FLAT;
                break;
            case 's':
                cu.model = DW_MODEL_SMALL;
                break;
            default:
                cu.model = DW_MODEL_NONE;
                break;
        }
        DWBeginCompileUnit( Client, &cu );
        if( cu.flags ) {
            BEFreeBack( bck );
        }
    } else {
        CcuDef = true;
    }
}