bool
ThreadHandler::_HandleThreadStopped(CpuState* cpuState, uint32 stoppedReason,
const BString& stoppedReasonInfo)
{
_ClearContinuationState();
AutoLocker<Team> locker(fThread->GetTeam());
_SetThreadState(THREAD_STATE_STOPPED, cpuState, stoppedReason,
stoppedReasonInfo);
return true;
}
void
ThreadHandler::HandleThreadAction(uint32 action, target_addr_t address)
{
AutoLocker<Team> locker(fThread->GetTeam());
if (fThread->State() == THREAD_STATE_UNKNOWN)
return;
// When stop is requested, thread must be running, otherwise stopped.
if (action == MSG_THREAD_STOP
? fThread->State() != THREAD_STATE_RUNNING
: fThread->State() != THREAD_STATE_STOPPED) {
return;
}
// When stepping we need a stack trace. Save it before unsetting the state.
CpuState* cpuState = fThread->GetCpuState();
StackTrace* stackTrace = fThread->GetStackTrace();
BReference<CpuState> cpuStateReference(cpuState);
BReference<StackTrace> stackTraceReference(stackTrace);
if (action == MSG_THREAD_SET_ADDRESS) {
_HandleSetAddress(cpuState, address);
return;
}
// When continuing the thread update thread state before actually issuing
// the command, since we need to unlock.
if (action != MSG_THREAD_STOP) {
_SetThreadState(THREAD_STATE_RUNNING, NULL, THREAD_STOPPED_UNKNOWN,
BString());
}
locker.Unlock();
switch (action) {
case MSG_THREAD_RUN:
fStepMode = address != 0 ? STEP_UNTIL : STEP_NONE;
if (address != 0)
_InstallTemporaryBreakpoint(address);
_RunThread(0);
return;
case MSG_THREAD_STOP:
fStepMode = STEP_NONE;
if (fDebuggerInterface->StopThread(ThreadID()) == B_OK)
fThread->SetStopRequestPending();
return;
case MSG_THREAD_STEP_OVER:
case MSG_THREAD_STEP_INTO:
case MSG_THREAD_STEP_OUT:
break;
}
TRACE_CONTROL("ThreadHandler::HandleThreadAction(MSG_THREAD_STEP_*)\n");
// We want to step. We need a stack trace for that purpose. If we don't
// have one yet, get it. Start with the CPU state.
if (stackTrace == NULL && cpuState == NULL) {
if (fDebuggerInterface->GetCpuState(fThread->ID(), cpuState) == B_OK)
cpuStateReference.SetTo(cpuState, true);
}
if (stackTrace == NULL && cpuState != NULL) {
if (fDebuggerInterface->GetArchitecture()->CreateStackTrace(
fThread->GetTeam(), this, cpuState, stackTrace, NULL, 1,
false, false) == B_OK) {
stackTraceReference.SetTo(stackTrace, true);
}
}
if (stackTrace == NULL || stackTrace->CountFrames() == 0) {
_StepFallback();
return;
}
StackFrame* frame = stackTrace->FrameAt(0);
TRACE_CONTROL(" ip: %#" B_PRIx64 "\n", frame->InstructionPointer());
target_addr_t frameIP = frame->GetCpuState()->InstructionPointer();
// When the thread is in a syscall, do the same for all step kinds: Stop it
// when it returns by means of a breakpoint.
if (frame->Type() == STACK_FRAME_TYPE_SYSCALL) {
// set a breakpoint at the CPU state's instruction pointer (points to
// the return address, unlike the stack frame's instruction pointer)
// TODO: This is doesn't work correctly anymore. When stepping over a "syscall"
// instruction the thread is stopped twice. The after the first step the PC is
// incorrectly shown at the "syscall" instruction. Then we step again and are
// stopped at the temporary breakpoint after the "syscall" instruction. There
// are two problems. The first one is that we don't (cannot?) discriminate
// between the thread being in a syscall (like in a blocking syscall) and the
// thread having been stopped (or singled-stepped) at the end of the syscall.
// The second issue is that the temporary breakpoint is probably not necessary
// anymore, since single-stepping over "syscall" instructions should just work
// as expected.
status_t error = _InstallTemporaryBreakpoint(frameIP);
if (error != B_OK) {
_StepFallback();
return;
}
fStepMode = STEP_OUT;
_RunThread(frameIP);
return;
}
// For "step out" just set a temporary breakpoint on the return address.
if (action == MSG_THREAD_STEP_OUT) {
status_t error = _InstallTemporaryBreakpoint(frame->ReturnAddress());
if (error != B_OK) {
_StepFallback();
return;
}
fPreviousInstructionPointer = frameIP;
fPreviousFrameAddress = frame->FrameAddress();
fStepMode = STEP_OUT;
_RunThread(frameIP);
return;
}
// For "step in" and "step over" we also need the source code statement at
// the current instruction pointer.
fStepStatement = _GetStatementAtInstructionPointer(frame);
if (fStepStatement == NULL) {
_StepFallback();
return;
}
TRACE_CONTROL(" statement: %#" B_PRIx64 " - %#" B_PRIx64 "\n",
fStepStatement->CoveringAddressRange().Start(),
fStepStatement->CoveringAddressRange().End());
if (action == MSG_THREAD_STEP_INTO) {
// step into
fStepMode = STEP_INTO;
_SingleStepThread(frameIP);
} else {
fPreviousFrameAddress = frame->FrameAddress();
// step over
fStepMode = STEP_OVER;
if (!_DoStepOver(frame->GetCpuState()))
_StepFallback();
}
}
void
ThreadHandler::HandleThreadAction(uint32 action)
{
AutoLocker<Team> locker(fThread->GetTeam());
if (fThread->State() == THREAD_STATE_UNKNOWN)
return;
// When stop is requested, thread must be running, otherwise stopped.
if (action == MSG_THREAD_STOP
? fThread->State() != THREAD_STATE_RUNNING
: fThread->State() != THREAD_STATE_STOPPED) {
return;
}
// When stepping we need a stack trace. Save it before unsetting the state.
CpuState* cpuState = fThread->GetCpuState();
StackTrace* stackTrace = fThread->GetStackTrace();
Reference<CpuState> cpuStateReference(cpuState);
Reference<StackTrace> stackTraceReference(stackTrace);
// When continuing the thread update thread state before actually issuing
// the command, since we need to unlock.
if (action != MSG_THREAD_STOP) {
_SetThreadState(THREAD_STATE_RUNNING, NULL, THREAD_STOPPED_UNKNOWN,
BString());
}
locker.Unlock();
switch (action) {
case MSG_THREAD_RUN:
fStepMode = STEP_NONE;
_RunThread(0);
return;
case MSG_THREAD_STOP:
fStepMode = STEP_NONE;
fDebuggerInterface->StopThread(ThreadID());
return;
case MSG_THREAD_STEP_OVER:
case MSG_THREAD_STEP_INTO:
case MSG_THREAD_STEP_OUT:
break;
}
TRACE_CONTROL("ThreadHandler::HandleThreadAction(MSG_THREAD_STEP_*)\n");
// We want to step. We need a stack trace for that purpose. If we don't
// have one yet, get it. Start with the CPU state.
if (stackTrace == NULL && cpuState == NULL) {
if (fDebuggerInterface->GetCpuState(fThread->ID(), cpuState) == B_OK)
cpuStateReference.SetTo(cpuState, true);
}
if (stackTrace == NULL && cpuState != NULL) {
if (fDebuggerInterface->GetArchitecture()->CreateStackTrace(
fThread->GetTeam(), this, cpuState, stackTrace) == B_OK) {
stackTraceReference.SetTo(stackTrace, true);
}
}
if (stackTrace == NULL || stackTrace->CountFrames() == 0) {
_StepFallback();
return;
}
StackFrame* frame = stackTrace->FrameAt(0);
TRACE_CONTROL(" ip: %#llx\n", frame->InstructionPointer());
// When the thread is in a syscall, do the same for all step kinds: Stop it
// when it return by means of a breakpoint.
if (frame->Type() == STACK_FRAME_TYPE_SYSCALL) {
// set a breakpoint at the CPU state's instruction pointer (points to
// the return address, unlike the stack frame's instruction pointer)
status_t error = _InstallTemporaryBreakpoint(
frame->GetCpuState()->InstructionPointer());
if (error != B_OK) {
_StepFallback();
return;
}
fStepMode = STEP_OUT;
_RunThread(frame->GetCpuState()->InstructionPointer());
return;
}
// For "step out" just set a temporary breakpoint on the return address.
if (action == MSG_THREAD_STEP_OUT) {
// TODO: That's OK in principle, but needs additional work with recursive
// functions. We need to store some information that allows us to determine
// whether we've actually stepped out of the current frame when we have hit
// the breakpoint.
status_t error = _InstallTemporaryBreakpoint(frame->ReturnAddress());
if (error != B_OK) {
_StepFallback();
return;
}
fStepMode = STEP_OUT;
_RunThread(frame->GetCpuState()->InstructionPointer());
return;
}
// For "step in" and "step over" we also need the source code statement at
// the current instruction pointer.
fStepStatement = _GetStatementAtInstructionPointer(frame);
if (fStepStatement == NULL) {
_StepFallback();
return;
}
TRACE_CONTROL(" statement: %#llx - %#llx\n",
fStepStatement->CoveringAddressRange().Start(),
fStepStatement->CoveringAddressRange().End());
if (action == MSG_THREAD_STEP_INTO) {
// step into
fStepMode = STEP_INTO;
_SingleStepThread(frame->GetCpuState()->InstructionPointer());
} else {
// step over
fStepMode = STEP_OVER;
if (!_DoStepOver(frame->GetCpuState()))
_StepFallback();
}
}