Ejemplos de __HAL_RCC_ADC3_CLK_DISABLE en C++ (Cpp)

Ejemplo n.º 1

0

Mostrar archivo

Archivo: stm32f4xx_hal_msp.c Proyecto: MBF2313/IBTMRP

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{

  if(hadc->Instance==ADC3)
  {
  /* USER CODE BEGIN ADC3_MspDeInit 0 */

  /* USER CODE END ADC3_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC3_CLK_DISABLE();
  
    /**ADC3 GPIO Configuration    
    PF3     ------> ADC3_IN9
    PF4     ------> ADC3_IN14
    PF8     ------> ADC3_IN6
    PF9     ------> ADC3_IN7 
    */
    HAL_GPIO_DeInit(GPIOF, CUR4_OUT_Pin|CUR3_OUT_Pin|CUR2_OUT_Pin|CUR1_OUT_Pin);

  }
  /* USER CODE BEGIN ADC3_MspDeInit 1 */

  /* USER CODE END ADC3_MspDeInit 1 */

}

Ejemplo n.º 2

0

Mostrar archivo

Archivo: adc_stm32f4.c Proyecto: vrahane/incubator-mynewt-core

static void
stm32f4_adc_clk_disable(ADC_HandleTypeDef *hadc)
{
    uintptr_t adc_addr = (uintptr_t)hadc->Instance;

    switch (adc_addr) {
        case (uintptr_t)ADC1:
            __HAL_RCC_ADC1_CLK_DISABLE();
            break;
        case (uintptr_t)ADC2:
            __HAL_RCC_ADC2_CLK_DISABLE();
            break;
        case (uintptr_t)ADC3:
            __HAL_RCC_ADC3_CLK_DISABLE();
            break;
        default:
            assert(0);
    }
}

Ejemplo n.º 3

0

Mostrar archivo

Archivo: adc_V3_4.c Proyecto: madcowswe/ODrive

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC1 GPIO Configuration    
    PC0     ------> ADC1_IN10
    PC1     ------> ADC1_IN11
    PC2     ------> ADC1_IN12
    PC3     ------> ADC1_IN13
    PA4     ------> ADC1_IN4
    PA5     ------> ADC1_IN5
    PA6     ------> ADC1_IN6
    PC4     ------> ADC1_IN14
    PC5     ------> ADC1_IN15 
    */
    HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin 
                          |AUX_TEMP_Pin|M0_TEMP_Pin);

    HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_I_Pin|VBUS_S_Pin);

    /* ADC1 interrupt Deinit */
  /* USER CODE BEGIN ADC1:ADC_IRQn disable */
    /**
    * Uncomment the line below to disable the "ADC_IRQn" interrupt
    * Be aware, disabling shared interrupt may affect other IPs
    */
    /* HAL_NVIC_DisableIRQ(ADC_IRQn); */
  /* USER CODE END ADC1:ADC_IRQn disable */

  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
  }
  else if(adcHandle->Instance==ADC2)
  {
  /* USER CODE BEGIN ADC2_MspDeInit 0 */

  /* USER CODE END ADC2_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC2_CLK_DISABLE();
  
    /**ADC2 GPIO Configuration    
    PC0     ------> ADC2_IN10
    PC1     ------> ADC2_IN11
    PC2     ------> ADC2_IN12
    PC3     ------> ADC2_IN13
    PA4     ------> ADC2_IN4
    PA5     ------> ADC2_IN5
    PA6     ------> ADC2_IN6
    PC4     ------> ADC2_IN14
    PC5     ------> ADC2_IN15 
    */
    HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin 
                          |AUX_TEMP_Pin|M0_TEMP_Pin);

    HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_I_Pin|VBUS_S_Pin);

    /* ADC2 interrupt Deinit */
  /* USER CODE BEGIN ADC2:ADC_IRQn disable */
    /**
    * Uncomment the line below to disable the "ADC_IRQn" interrupt
    * Be aware, disabling shared interrupt may affect other IPs
    */
    /* HAL_NVIC_DisableIRQ(ADC_IRQn); */
  /* USER CODE END ADC2:ADC_IRQn disable */

  /* USER CODE BEGIN ADC2_MspDeInit 1 */

  /* USER CODE END ADC2_MspDeInit 1 */
  }
  else if(adcHandle->Instance==ADC3)
  {
  /* USER CODE BEGIN ADC3_MspDeInit 0 */

  /* USER CODE END ADC3_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC3_CLK_DISABLE();
  
    /**ADC3 GPIO Configuration    
    PC0     ------> ADC3_IN10
    PC1     ------> ADC3_IN11
    PC2     ------> ADC3_IN12
    PC3     ------> ADC3_IN13 
    */
    HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin);

    /* ADC3 interrupt Deinit */
  /* USER CODE BEGIN ADC3:ADC_IRQn disable */
    /**
    * Uncomment the line below to disable the "ADC_IRQn" interrupt
    * Be aware, disabling shared interrupt may affect other IPs
    */
    /* HAL_NVIC_DisableIRQ(ADC_IRQn); */
  /* USER CODE END ADC3:ADC_IRQn disable */

  /* USER CODE BEGIN ADC3_MspDeInit 1 */

  /* USER CODE END ADC3_MspDeInit 1 */
  }
}

Ejemplo n.º 4

0

Mostrar archivo

Archivo: analog.c Proyecto: amassou2017/Arduino_Core_STM32

/**
  * @brief  DeInitializes the ADC MSP.
  * @param  hadc: ADC handle
  * @retval None
  */
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
#ifdef __HAL_RCC_ADC_FORCE_RESET
  __HAL_RCC_ADC_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC_RELEASE_RESET
  __HAL_RCC_ADC_RELEASE_RESET();
#endif

  if(hadc->Instance == ADC1) {
#ifdef __HAL_RCC_ADC1_FORCE_RESET
	__HAL_RCC_ADC1_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC1_RELEASE_RESET
    __HAL_RCC_ADC1_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC12_FORCE_RESET
	__HAL_RCC_ADC12_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC12_RELEASE_RESET
    __HAL_RCC_ADC12_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC1_CLK_DISABLE
	__HAL_RCC_ADC1_CLK_DISABLE();
#endif
#ifdef __HAL_RCC_ADC12_CLK_DISABLE
	__HAL_RCC_ADC12_CLK_DISABLE();
#endif
  }
#ifdef ADC2
  else if(hadc->Instance == ADC2) {
#ifdef __HAL_RCC_ADC2_FORCE_RESET
	__HAL_RCC_ADC2_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC2_RELEASE_RESET
    __HAL_RCC_ADC2_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC12_FORCE_RESET
	__HAL_RCC_ADC12_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC12_RELEASE_RESET
    __HAL_RCC_ADC12_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC2_CLK_DISABLE
	__HAL_RCC_ADC2_CLK_DISABLE();
#endif
#ifdef __HAL_RCC_ADC2_CLK_DISABLE
	__HAL_RCC_ADC2_CLK_DISABLE();
#endif
  }
#endif
#ifdef ADC3
  else if(hadc->Instance == ADC3) {
#ifdef __HAL_RCC_ADC3_FORCE_RESET
	__HAL_RCC_ADC3_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC3_RELEASE_RESET
    __HAL_RCC_ADC3_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC34_FORCE_RESET
	__HAL_RCC_ADC34_FORCE_RESET();
#endif
#ifdef __HAL_RCC_ADC34_RELEASE_RESET
    __HAL_RCC_ADC34_RELEASE_RESET();
#endif
#ifdef __HAL_RCC_ADC3_CLK_DISABLE
    __HAL_RCC_ADC3_CLK_DISABLE();
#endif
#ifdef __HAL_RCC_ADC34_CLK_DISABLE
    __HAL_RCC_ADC34_CLK_DISABLE();
#endif
  }
#endif
#ifdef ADC4
  else if(hadc->Instance == ADC4) {
	__HAL_RCC_ADC34_FORCE_RESET();
    __HAL_RCC_ADC34_RELEASE_RESET();
    __HAL_RCC_ADC34_CLK_DISABLE();
  }
#endif
#ifdef __HAL_RCC_ADC_CLK_DISABLE
  __HAL_RCC_ADC_CLK_DISABLE();
#endif
}

Ejemplo n.º 5

0

Mostrar archivo

Archivo: adc.c Proyecto: dzavalishin/smart-home-devices

void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
{

  if(adcHandle->Instance==ADC1)
  {
  /* USER CODE BEGIN ADC1_MspDeInit 0 */

  /* USER CODE END ADC1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC1_CLK_DISABLE();
  
    /**ADC1 GPIO Configuration    
    PA6     ------> ADC1_IN6
    PB1     ------> ADC1_IN9 
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6);

    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_1);

  /* USER CODE BEGIN ADC1_MspDeInit 1 */

  /* USER CODE END ADC1_MspDeInit 1 */
  }
  else if(adcHandle->Instance==ADC2)
  {
  /* USER CODE BEGIN ADC2_MspDeInit 0 */

  /* USER CODE END ADC2_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC2_CLK_DISABLE();
  
    /**ADC2 GPIO Configuration    
    PA5     ------> ADC2_IN5
    PB0     ------> ADC2_IN8 
    */
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5);

    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_0);

  /* USER CODE BEGIN ADC2_MspDeInit 1 */

  /* USER CODE END ADC2_MspDeInit 1 */
  }
  else if(adcHandle->Instance==ADC3)
  {
  /* USER CODE BEGIN ADC3_MspDeInit 0 */

  /* USER CODE END ADC3_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_ADC3_CLK_DISABLE();
  
    /**ADC3 GPIO Configuration    
    PC0     ------> ADC3_IN10
    PC2     ------> ADC3_IN12
    PC3     ------> ADC3_IN13
    PA0-WKUP     ------> ADC3_IN0 
    */
    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_3);

    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0);

  /* USER CODE BEGIN ADC3_MspDeInit 1 */

  /* USER CODE END ADC3_MspDeInit 1 */
  }
}