void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* lptimHandle)
{
GPIO_InitTypeDef GPIO_InitStruct;
if(lptimHandle->Instance==LPTIM1)
{
/* USER CODE BEGIN LPTIM1_MspInit 0 */
/* USER CODE END LPTIM1_MspInit 0 */
/* LPTIM1 clock enable */
__HAL_RCC_LPTIM1_CLK_ENABLE();
/**LPTIM1 GPIO Configuration
PA7 ------> LPTIM1_OUT
*/
GPIO_InitStruct.Pin = GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_LPTIM1;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* LPTIM1 interrupt Init */
HAL_NVIC_SetPriority(LPTIM1_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(LPTIM1_IRQn);
/* USER CODE BEGIN LPTIM1_MspInit 1 */
/* USER CODE END LPTIM1_MspInit 1 */
}
}
/**
* @brief LPTIM MSP Initialization
* This function configures the hardware resources used in this example:
* - Peripheral's clock enable
* @param hlptim: LPTIM handle pointer
* @retval None
*/
void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Enable LPTIM clock */
__HAL_RCC_LPTIM1_CLK_ENABLE();
/* Force the CRYP Periheral Clock Reset */
__HAL_RCC_LPTIM1_FORCE_RESET();
/* Release the CRYP Periheral Clock Reset */
__HAL_RCC_LPTIM1_RELEASE_RESET();
/* GPIO configuration: LPTim OUT pin: PC1 */
__HAL_RCC_GPIOC_CLK_ENABLE();
GPIO_InitStruct.Pin = GPIO_PIN_1 ;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF0_LPTIM1;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
}
void enableGPIOPowerUsageAndNoiseReductions(void)
{
// AHB1
__HAL_RCC_BKPSRAM_CLK_ENABLE();
__HAL_RCC_DTCMRAMEN_CLK_ENABLE();
__HAL_RCC_DMA2_CLK_ENABLE();
__HAL_RCC_USB_OTG_HS_CLK_ENABLE();
__HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOI_CLK_ENABLE();
#ifndef STM32F722xx
__HAL_RCC_DMA2D_CLK_ENABLE();
__HAL_RCC_GPIOJ_CLK_ENABLE();
__HAL_RCC_GPIOK_CLK_ENABLE();
#endif
//APB1
__HAL_RCC_TIM2_CLK_ENABLE();
__HAL_RCC_TIM3_CLK_ENABLE();
__HAL_RCC_TIM4_CLK_ENABLE();
__HAL_RCC_TIM5_CLK_ENABLE();
__HAL_RCC_TIM6_CLK_ENABLE();
__HAL_RCC_TIM7_CLK_ENABLE();
__HAL_RCC_TIM12_CLK_ENABLE();
__HAL_RCC_TIM13_CLK_ENABLE();
__HAL_RCC_TIM14_CLK_ENABLE();
__HAL_RCC_LPTIM1_CLK_ENABLE();
__HAL_RCC_SPI2_CLK_ENABLE();
__HAL_RCC_SPI3_CLK_ENABLE();
__HAL_RCC_USART2_CLK_ENABLE();
__HAL_RCC_USART3_CLK_ENABLE();
__HAL_RCC_UART4_CLK_ENABLE();
__HAL_RCC_UART5_CLK_ENABLE();
__HAL_RCC_I2C1_CLK_ENABLE();
__HAL_RCC_I2C2_CLK_ENABLE();
__HAL_RCC_I2C3_CLK_ENABLE();
__HAL_RCC_CAN1_CLK_ENABLE();
__HAL_RCC_DAC_CLK_ENABLE();
__HAL_RCC_UART7_CLK_ENABLE();
__HAL_RCC_UART8_CLK_ENABLE();
#ifndef STM32F722xx
__HAL_RCC_I2C4_CLK_ENABLE();
__HAL_RCC_CAN2_CLK_ENABLE();
__HAL_RCC_CEC_CLK_ENABLE();
#endif
//APB2
__HAL_RCC_TIM1_CLK_ENABLE();
__HAL_RCC_TIM8_CLK_ENABLE();
__HAL_RCC_USART1_CLK_ENABLE();
__HAL_RCC_USART6_CLK_ENABLE();
__HAL_RCC_ADC1_CLK_ENABLE();
__HAL_RCC_ADC2_CLK_ENABLE();
__HAL_RCC_ADC3_CLK_ENABLE();
__HAL_RCC_SDMMC1_CLK_ENABLE();
__HAL_RCC_SPI1_CLK_ENABLE();
__HAL_RCC_SPI4_CLK_ENABLE();
__HAL_RCC_TIM9_CLK_ENABLE();
__HAL_RCC_TIM10_CLK_ENABLE();
__HAL_RCC_TIM11_CLK_ENABLE();
__HAL_RCC_SPI5_CLK_ENABLE();
__HAL_RCC_SAI1_CLK_ENABLE();
__HAL_RCC_SAI2_CLK_ENABLE();
#ifndef STM32F722xx
__HAL_RCC_SPI6_CLK_ENABLE();
#endif
//
// GPIO_InitTypeDef GPIO_InitStructure;
// GPIO_StructInit(&GPIO_InitStructure);
// GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; // default is un-pulled input
//
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
// GPIO_InitStructure.GPIO_Pin &= ~(GPIO_Pin_11 | GPIO_Pin_12); // leave USB D+/D- alone
//
// GPIO_InitStructure.GPIO_Pin &= ~(GPIO_Pin_13 | GPIO_Pin_14); // leave JTAG pins alone
// GPIO_Init(GPIOA, &GPIO_InitStructure);
//
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
// GPIO_Init(GPIOB, &GPIO_InitStructure);
//
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
// GPIO_Init(GPIOC, &GPIO_InitStructure);
// GPIO_Init(GPIOD, &GPIO_InitStructure);
// GPIO_Init(GPIOE, &GPIO_InitStructure);
}
