Ejemplo n.º 1
0
void serial_free(serial_t *obj)
{
    // Reset UART and disable clock
    if (obj->uart == UART_1) {
        __USART1_FORCE_RESET();
        __USART1_RELEASE_RESET();
        __USART1_CLK_DISABLE();
    }

    if (obj->uart == UART_2) {
        __USART2_FORCE_RESET();
        __USART2_RELEASE_RESET();
        __USART2_CLK_DISABLE();
    }

    if (obj->uart == UART_3) {
        __USART3_FORCE_RESET();
        __USART3_RELEASE_RESET();
        __USART3_CLK_DISABLE();
    }

    if (obj->uart == UART_4) {
        __USART4_FORCE_RESET();
        __USART4_RELEASE_RESET();
        __USART4_CLK_DISABLE();
    }

    if (obj->uart == UART_5) {
        __USART5_FORCE_RESET();
        __USART5_RELEASE_RESET();
        __USART5_CLK_DISABLE();
    }

    if (obj->uart == UART_6) {
        __USART6_FORCE_RESET();
        __USART6_RELEASE_RESET();
        __USART6_CLK_DISABLE();
    }

    if (obj->uart == UART_7) {
        __USART7_FORCE_RESET();
        __USART7_RELEASE_RESET();
        __USART7_CLK_DISABLE();
    }

    if (obj->uart == UART_8) {
        __USART8_FORCE_RESET();
        __USART8_RELEASE_RESET();
        __USART8_CLK_DISABLE();
    }

    // Configure GPIOs
    pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
    pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));

    serial_irq_ids[obj->index] = 0;
}
Ejemplo n.º 2
0
/**
* @brief UART MSP De-Initialization 
*        This function frees the hardware resources used in this example:
*          - Disable the Peripheral's clock
*          - Revert GPIO and NVIC configuration to their default state
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
{
  switch((uint32_t)huart->Instance)
  {
  case (uint32_t)USART1 :
    {
      /*##-1- Reset peripherals ##################################################*/
      __USART1_FORCE_RESET();
      __USART1_RELEASE_RESET();
      __USART1_CLK_DISABLE();
      
      /*##-2- Disable peripherals and GPIO Clocks #################################*/
      /* Configure UART Tx/Rx as alternate function  */
      HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10);
      
      /*##-3- Disable the NVIC for UART ##########################################*/
      IRQ_Managment(__DISABLE, USART1_IRQn);
    }
    break;
  case (uint32_t)USART2 :
    {
      /*##-1- Reset peripherals ##################################################*/
      __USART2_FORCE_RESET();
      __USART2_RELEASE_RESET();
      __USART2_CLK_DISABLE();
      
      /*##-2- Disable peripherals and GPIO Clocks #################################*/
      /* Configure UART Tx/Rx as alternate function  */
      HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5 | GPIO_PIN_6);
      
      /*##-3- Disable the NVIC for UART ##########################################*/
      IRQ_Managment(__DISABLE, USART2_IRQn);
    }
    break;
  case (uint32_t)USART3 :
    {
      /*##-1- Reset peripherals ##################################################*/
      __USART3_FORCE_RESET();
      __USART3_RELEASE_RESET();
      __USART3_CLK_DISABLE();
      
      /*##-2- Disable peripherals and GPIO Clocks #################################*/
      /* Configure UART Tx/Rx as alternate function  */
      HAL_GPIO_DeInit(GPIOD, GPIO_PIN_9 | GPIO_PIN_10);
      
      /*##-3- Disable the NVIC for UART ##########################################*/
      IRQ_Managment(__DISABLE, USART3_8_IRQn);
      
    }
    break;
  case (uint32_t)USART4 :
    {
      /*##-1- Reset peripherals ##################################################*/
      __USART4_FORCE_RESET();
      __USART4_RELEASE_RESET();
      __USART4_CLK_DISABLE();
      
      /*##-2- Disable peripherals and GPIO Clocks #################################*/
      /* Configure UART Tx/Rx as alternate function  */
      HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10 | GPIO_PIN_11);
      
      /*##-3- Disable the NVIC for UART ##########################################*/
      IRQ_Managment(__DISABLE, USART3_8_IRQn);
    }
    break;
  case (uint32_t)USART5 :
    {
      /*##-1- Reset peripherals ##################################################*/
      __USART5_FORCE_RESET();
      __USART5_RELEASE_RESET();
      __USART5_CLK_DISABLE();
      
      /*##-2- Disable peripherals and GPIO Clocks #################################*/
      /* Configure UART Tx/Rx as alternate function  */
      HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3 | GPIO_PIN_4);
      
      /*##-3- Disable the NVIC for UART ##########################################*/
      IRQ_Managment(__DISABLE, USART3_8_IRQn);
    }
    break;
  case (uint32_t)USART6 :
    {
      /*##-1- Reset peripherals ##################################################*/
      __USART6_FORCE_RESET();
      __USART6_RELEASE_RESET();
      __USART6_CLK_DISABLE();
      
      /*##-2- Disable peripherals and GPIO Clocks #################################*/
      /* Configure UART Tx/Rx as alternate function  */
      HAL_GPIO_DeInit(GPIOF, GPIO_PIN_9 | GPIO_PIN_10);
      
      /*##-3- Disable the NVIC for UART ##########################################*/
      IRQ_Managment(__DISABLE, USART3_8_IRQn);
    }
    break;
  case (uint32_t)USART7 :
    {
      /*##-1- Reset peripherals ##################################################*/
      __USART7_FORCE_RESET();
      __USART7_RELEASE_RESET();
      __USART7_CLK_DISABLE();
      
      /*##-2- Disable peripherals and GPIO Clocks #################################*/
      /* Configure UART Tx/Rx as alternate function  */
      HAL_GPIO_DeInit(GPIOF, GPIO_PIN_2 | GPIO_PIN_3);
      
      /*##-3- Disable the NVIC for UART ##########################################*/
      IRQ_Managment(__DISABLE, USART3_8_IRQn);
    }
    break;
  case (uint32_t)USART8 :
    {
      /*##-1- Reset peripherals ##################################################*/
      __USART8_FORCE_RESET();
      __USART8_RELEASE_RESET();
      __USART8_CLK_DISABLE();
      
      /*##-2- Disable peripherals and GPIO Clocks #################################*/
      /* Configure UART Tx/Rx as alternate function  */
      HAL_GPIO_DeInit(GPIOC, GPIO_PIN_8 | GPIO_PIN_9);
      
      /*##-3- Disable the NVIC for UART ##########################################*/
      IRQ_Managment(__DISABLE, USART3_8_IRQn);
    }
    break;
  }
}