/*
* __wt_connection_close --
* Close a connection handle.
*/
int
__wt_connection_close(WT_CONNECTION_IMPL *conn)
{
WT_CONNECTION *wt_conn;
WT_DECL_RET;
WT_DLH *dlh;
WT_SESSION_IMPL *s, *session;
WT_TXN_GLOBAL *txn_global;
u_int i;
wt_conn = &conn->iface;
txn_global = &conn->txn_global;
session = conn->default_session;
/*
* We're shutting down. Make sure everything gets freed.
*
* It's possible that the eviction server is in the middle of a long
* operation, with a transaction ID pinned. In that case, we will loop
* here until the transaction ID is released, when the oldest
* transaction ID will catch up with the current ID.
*/
for (;;) {
WT_TRET(__wt_txn_update_oldest(session,
WT_TXN_OLDEST_STRICT | WT_TXN_OLDEST_WAIT));
if (txn_global->oldest_id == txn_global->current)
break;
__wt_yield();
}
/* Clear any pending async ops. */
WT_TRET(__wt_async_flush(session));
/*
* Shut down server threads other than the eviction server, which is
* needed later to close btree handles. Some of these threads access
* btree handles, so take care in ordering shutdown to make sure they
* exit before files are closed.
*/
F_CLR(conn, WT_CONN_SERVER_RUN);
WT_TRET(__wt_async_destroy(session));
WT_TRET(__wt_lsm_manager_destroy(session));
WT_TRET(__wt_sweep_destroy(session));
F_SET(conn, WT_CONN_CLOSING);
WT_TRET(__wt_checkpoint_server_destroy(session));
WT_TRET(__wt_statlog_destroy(session, true));
WT_TRET(__wt_evict_destroy(session));
/* Shut down the lookaside table, after all eviction is complete. */
WT_TRET(__wt_las_destroy(session));
/* Close open data handles. */
WT_TRET(__wt_conn_dhandle_discard(session));
/* Shut down metadata tracking, required before creating tables. */
WT_TRET(__wt_meta_track_destroy(session));
/*
* Now that all data handles are closed, tell logging that a checkpoint
* has completed then shut down the log manager (only after closing
* data handles). The call to destroy the log manager is outside the
* conditional because we allocate the log path so that printlog can
* run without running logging or recovery.
*/
if (FLD_ISSET(conn->log_flags, WT_CONN_LOG_ENABLED) &&
FLD_ISSET(conn->log_flags, WT_CONN_LOG_RECOVER_DONE))
WT_TRET(__wt_txn_checkpoint_log(
session, true, WT_TXN_LOG_CKPT_STOP, NULL));
F_CLR(conn, WT_CONN_LOG_SERVER_RUN);
WT_TRET(__wt_logmgr_destroy(session));
/* Free memory for collators, compressors, data sources. */
WT_TRET(__wt_conn_remove_collator(session));
WT_TRET(__wt_conn_remove_compressor(session));
WT_TRET(__wt_conn_remove_data_source(session));
WT_TRET(__wt_conn_remove_encryptor(session));
WT_TRET(__wt_conn_remove_extractor(session));
/* Disconnect from shared cache - must be before cache destroy. */
WT_TRET(__wt_conn_cache_pool_destroy(session));
/* Discard the cache. */
WT_TRET(__wt_cache_destroy(session));
/* Discard transaction state. */
WT_TRET(__wt_txn_global_destroy(session));
/* Close extensions, first calling any unload entry point. */
while ((dlh = TAILQ_FIRST(&conn->dlhqh)) != NULL) {
TAILQ_REMOVE(&conn->dlhqh, dlh, q);
if (dlh->terminate != NULL)
WT_TRET(dlh->terminate(wt_conn));
WT_TRET(__wt_dlclose(session, dlh));
}
/* Close the lock file, opening up the database to other connections. */
if (conn->lock_fh != NULL)
WT_TRET(__wt_close(session, &conn->lock_fh));
/* Close any file handles left open. */
WT_TRET(__wt_close_connection_close(session));
/*
* Close the internal (default) session, and switch back to the dummy
* session in case of any error messages from the remaining operations
* while destroying the connection handle.
*/
if (session != &conn->dummy_session) {
WT_TRET(session->iface.close(&session->iface, NULL));
session = conn->default_session = &conn->dummy_session;
}
/*
* The session's split stash isn't discarded during normal session close
* because it may persist past the life of the session. Discard it now.
*/
if ((s = conn->sessions) != NULL)
for (i = 0; i < conn->session_size; ++s, ++i)
__wt_split_stash_discard_all(session, s);
/*
* The session's hazard pointer memory isn't discarded during normal
* session close because access to it isn't serialized. Discard it
* now.
*/
if ((s = conn->sessions) != NULL)
for (i = 0; i < conn->session_size; ++s, ++i) {
/*
* If hash arrays were allocated, free them now.
*/
__wt_free(session, s->dhhash);
__wt_free(session, s->tablehash);
__wt_free(session, s->hazard);
}
/* Destroy the handle. */
WT_TRET(__wt_connection_destroy(conn));
return (ret);
}
/*
* wiredtiger_open --
* Main library entry point: open a new connection to a WiredTiger
* database.
*/
int
wiredtiger_open(const char *home, WT_EVENT_HANDLER *event_handler,
const char *config, WT_CONNECTION **wt_connp)
{
static WT_CONNECTION stdc = {
__conn_close,
__conn_reconfigure,
__conn_get_home,
__conn_is_new,
__conn_open_session,
__conn_load_extension,
__conn_add_data_source,
__conn_add_collator,
__conn_add_compressor,
__conn_add_extractor
};
static struct {
const char *name;
uint32_t flag;
} *ft, directio_types[] = {
{ "data", WT_DIRECTIO_DATA },
{ "log", WT_DIRECTIO_LOG },
{ NULL, 0 }
};
WT_CONFIG subconfig;
WT_CONFIG_ITEM cval, skey, sval;
WT_CONNECTION_IMPL *conn;
WT_DECL_RET;
WT_ITEM *cbuf, expath, exconfig;
WT_SESSION_IMPL *session;
const char *cfg[] =
{ __wt_confdfl_wiredtiger_open, config, NULL, NULL, NULL };
int exist;
*wt_connp = NULL;
session = NULL;
cbuf = NULL;
WT_CLEAR(expath);
WT_CLEAR(exconfig);
WT_RET(__wt_library_init());
WT_RET(__wt_calloc_def(NULL, 1, &conn));
conn->iface = stdc;
/*
* Immediately link the structure into the connection structure list:
* the only thing ever looked at on that list is the database name,
* and a NULL value is fine.
*/
__wt_spin_lock(NULL, &__wt_process.spinlock);
TAILQ_INSERT_TAIL(&__wt_process.connqh, conn, q);
__wt_spin_unlock(NULL, &__wt_process.spinlock);
session = conn->default_session = &conn->dummy_session;
session->iface.connection = &conn->iface;
session->name = "wiredtiger_open";
__wt_event_handler_set(session, event_handler);
/* Remaining basic initialization of the connection structure. */
WT_ERR(__wt_connection_init(conn));
/* Check the configuration strings. */
WT_ERR(__wt_config_check(
session, __wt_confchk_wiredtiger_open, config, 0));
/* Get the database home. */
WT_ERR(__conn_home(session, home, cfg));
/* Make sure no other thread of control already owns this database. */
WT_ERR(__conn_single(session, cfg));
/* Read the database-home configuration file. */
WT_ERR(__conn_config_file(session, cfg, &cbuf));
/* Read the environment variable configuration. */
WT_ERR(__conn_config_env(session, cfg));
WT_ERR(__wt_config_gets(session, cfg, "hazard_max", &cval));
conn->hazard_max = (uint32_t)cval.val;
WT_ERR(__wt_config_gets(session, cfg, "session_max", &cval));
conn->session_size = (uint32_t)cval.val + WT_NUM_INTERNAL_SESSIONS;
WT_ERR(__wt_config_gets(session, cfg, "lsm_merge", &cval));
if (cval.val)
F_SET(conn, WT_CONN_LSM_MERGE);
WT_ERR(__wt_config_gets(session, cfg, "sync", &cval));
if (cval.val)
F_SET(conn, WT_CONN_SYNC);
WT_ERR(__wt_config_gets(session, cfg, "transactional", &cval));
if (cval.val)
F_SET(conn, WT_CONN_TRANSACTIONAL);
/* Configure verbose flags. */
WT_ERR(__conn_verbose_config(session, cfg));
WT_ERR(__wt_conn_cache_pool_config(session, cfg));
WT_ERR(__wt_config_gets(session, cfg, "logging", &cval));
if (cval.val != 0)
WT_ERR(__wt_open(
session, WT_LOG_FILENAME, 1, 0, 0, &conn->log_fh));
/* Configure direct I/O and buffer alignment. */
WT_ERR(__wt_config_gets(session, cfg, "buffer_alignment", &cval));
if (cval.val == -1)
conn->buffer_alignment = WT_BUFFER_ALIGNMENT_DEFAULT;
else
conn->buffer_alignment = (size_t)cval.val;
#ifndef HAVE_POSIX_MEMALIGN
if (conn->buffer_alignment != 0)
WT_ERR_MSG(session, EINVAL,
"buffer_alignment requires posix_memalign");
#endif
/*
* Configuration: direct_io, mmap, statistics.
*/
WT_ERR(__wt_config_gets(session, cfg, "direct_io", &cval));
for (ft = directio_types; ft->name != NULL; ft++) {
ret = __wt_config_subgets(session, &cval, ft->name, &sval);
if (ret == 0) {
if (sval.val)
FLD_SET(conn->direct_io, ft->flag);
} else if (ret != WT_NOTFOUND)
goto err;
}
WT_ERR(__wt_config_gets(session, cfg, "mmap", &cval));
conn->mmap = cval.val == 0 ? 0 : 1;
WT_ERR(__wt_config_gets(session, cfg, "statistics", &cval));
conn->statistics = cval.val == 0 ? 0 : 1;
/* Load any extensions referenced in the config. */
WT_ERR(__wt_config_gets(session, cfg, "extensions", &cval));
WT_ERR(__wt_config_subinit(session, &subconfig, &cval));
while ((ret = __wt_config_next(&subconfig, &skey, &sval)) == 0) {
WT_ERR(__wt_buf_fmt(
session, &expath, "%.*s", (int)skey.len, skey.str));
if (sval.len > 0)
WT_ERR(__wt_buf_fmt(session, &exconfig,
"entry=%.*s\n", (int)sval.len, sval.str));
WT_ERR(conn->iface.load_extension(&conn->iface,
expath.data, (sval.len > 0) ? exconfig.data : NULL));
}
WT_ERR_NOTFOUND_OK(ret);
/*
* Open the connection; if that fails, the connection handle has been
* destroyed by the time the open function returns.
*/
if ((ret = __wt_connection_open(conn, cfg)) != 0) {
conn = NULL;
WT_ERR(ret);
}
/* Open the default session. */
WT_ERR(__wt_open_session(conn, 1, NULL, NULL, &conn->default_session));
session = conn->default_session;
/*
* Check on the turtle and metadata files, creating them if necessary
* (which avoids application threads racing to create the metadata file
* later).
*/
WT_ERR(__wt_meta_turtle_init(session, &exist));
if (!exist) {
/*
* We're single-threaded, but acquire the schema lock
* regardless: the lower level code checks that it is
* appropriately synchronized.
*/
WT_WITH_SCHEMA_LOCK(session,
ret = __wt_schema_create(session, WT_METADATA_URI, NULL));
WT_ERR(ret);
}
WT_ERR(__wt_metadata_open(session));
/* If there's a hot-backup file, load it. */
WT_ERR(__wt_metadata_load_backup(session));
/*
* XXX LSM initialization.
* This is structured so that it could be moved to an extension.
*/
WT_ERR(__wt_lsm_init(&conn->iface, NULL));
STATIC_ASSERT(offsetof(WT_CONNECTION_IMPL, iface) == 0);
*wt_connp = &conn->iface;
/*
* Destroying the connection on error will destroy our session handle,
* cleanup using the session handle first, then discard the connection.
*/
err: if (cbuf != NULL)
__wt_buf_free(session, cbuf);
__wt_buf_free(session, &expath);
__wt_buf_free(session, &exconfig);
if (ret != 0 && conn != NULL)
WT_TRET(__wt_connection_destroy(conn));
/* Let the server threads proceed. */
if (ret == 0)
conn->connection_initialized = 1;
return (ret);
}
/*
* __wt_connection_close --
* Close a connection handle.
*/
int
__wt_connection_close(WT_CONNECTION_IMPL *conn)
{
WT_CONNECTION *wt_conn;
WT_DECL_RET;
WT_DLH *dlh;
WT_SESSION_IMPL *s, *session;
u_int i;
wt_conn = &conn->iface;
session = conn->default_session;
/* Shut down transactions (wait for in-flight operations to complete. */
WT_TRET(__wt_txn_global_shutdown(session));
/* Shut down the subsystems, ensuring workers see the state change. */
F_SET(conn, WT_CONN_CLOSING);
WT_FULL_BARRIER();
/*
* Clear any pending async operations and shut down the async worker
* threads and system before closing LSM.
*/
WT_TRET(__wt_async_flush(session));
WT_TRET(__wt_async_destroy(session));
/*
* Shut down server threads other than the eviction server, which is
* needed later to close btree handles. Some of these threads access
* btree handles, so take care in ordering shutdown to make sure they
* exit before files are closed.
*/
WT_TRET(__wt_lsm_manager_destroy(session));
/*
* Once the async and LSM threads exit, we shouldn't be opening any
* more files.
*/
F_SET(conn, WT_CONN_CLOSING_NO_MORE_OPENS);
WT_FULL_BARRIER();
WT_TRET(__wt_checkpoint_server_destroy(session));
WT_TRET(__wt_statlog_destroy(session, true));
WT_TRET(__wt_sweep_destroy(session));
/* The eviction server is shut down last. */
WT_TRET(__wt_evict_destroy(session));
/* Shut down the lookaside table, after all eviction is complete. */
WT_TRET(__wt_las_destroy(session));
/* Close open data handles. */
WT_TRET(__wt_conn_dhandle_discard(session));
/* Shut down metadata tracking. */
WT_TRET(__wt_meta_track_destroy(session));
/*
* Now that all data handles are closed, tell logging that a checkpoint
* has completed then shut down the log manager (only after closing
* data handles). The call to destroy the log manager is outside the
* conditional because we allocate the log path so that printlog can
* run without running logging or recovery.
*/
if (FLD_ISSET(conn->log_flags, WT_CONN_LOG_ENABLED) &&
FLD_ISSET(conn->log_flags, WT_CONN_LOG_RECOVER_DONE))
WT_TRET(__wt_txn_checkpoint_log(
session, true, WT_TXN_LOG_CKPT_STOP, NULL));
WT_TRET(__wt_logmgr_destroy(session));
/* Free memory for collators, compressors, data sources. */
WT_TRET(__wt_conn_remove_collator(session));
WT_TRET(__wt_conn_remove_compressor(session));
WT_TRET(__wt_conn_remove_data_source(session));
WT_TRET(__wt_conn_remove_encryptor(session));
WT_TRET(__wt_conn_remove_extractor(session));
/* Disconnect from shared cache - must be before cache destroy. */
WT_TRET(__wt_conn_cache_pool_destroy(session));
/* Discard the cache. */
WT_TRET(__wt_cache_destroy(session));
/* Discard transaction state. */
__wt_txn_global_destroy(session);
/* Close the lock file, opening up the database to other connections. */
if (conn->lock_fh != NULL)
WT_TRET(__wt_close(session, &conn->lock_fh));
/* Close any file handles left open. */
WT_TRET(__wt_close_connection_close(session));
/*
* Close the internal (default) session, and switch back to the dummy
* session in case of any error messages from the remaining operations
* while destroying the connection handle.
*/
if (session != &conn->dummy_session) {
WT_TRET(session->iface.close(&session->iface, NULL));
session = conn->default_session = &conn->dummy_session;
}
/*
* The session split stash, hazard information and handle arrays aren't
* discarded during normal session close, they persist past the life of
* the session. Discard them now.
*/
if (!F_ISSET(conn, WT_CONN_LEAK_MEMORY))
if ((s = conn->sessions) != NULL)
for (i = 0; i < conn->session_size; ++s, ++i) {
__wt_free(session, s->dhhash);
__wt_stash_discard_all(session, s);
__wt_free(session, s->hazard);
}
/* Destroy the file-system configuration. */
if (conn->file_system != NULL && conn->file_system->terminate != NULL)
WT_TRET(conn->file_system->terminate(
conn->file_system, (WT_SESSION *)session));
/* Close extensions, first calling any unload entry point. */
while ((dlh = TAILQ_FIRST(&conn->dlhqh)) != NULL) {
TAILQ_REMOVE(&conn->dlhqh, dlh, q);
if (dlh->terminate != NULL)
WT_TRET(dlh->terminate(wt_conn));
WT_TRET(__wt_dlclose(session, dlh));
}
/* Destroy the handle. */
__wt_connection_destroy(conn);
return (ret);
}
