/*******************************************************************************
* Function Name : _send_command
* Description : None
* Input : - cmd:
* - arg:
* - crc:
* Output : None
* Return : R1 value, response from card
* Attention : None
*******************************************************************************/
int _send_command(uint8_t cmd, uint32_t arg, uint8_t crc)
{
uint8_t r1;
uint8_t retry;
/* Dummy byte and chip enable */
_spi_read_write(DUMMY_BYTE);
_card_enable();
/* Command, argument and crc */
_spi_read_write(cmd | 0x40);
_spi_read_write(arg >> 24);
_spi_read_write(arg >> 16);
_spi_read_write(arg >> 8);
_spi_read_write(arg);
_spi_read_write(crc);
/* Wait response, quit till timeout */
for(retry = 0; retry < 200; retry++)
{
r1 = _spi_read_write(DUMMY_BYTE);
if(r1 != 0xFF)
{
break;
}
}
/* Chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
return r1;
}
/*******************************************************************************
* Function Name : _read_buffer
* Description : None
* Input : - *buff:
* - len:
* - release:
* Output : None
* Return : 0：NO_ERR; TRUE: Error
* Attention : None
*******************************************************************************/
int _read_buffer(uint8_t *buff, uint16_t len, uint8_t release)
{
uint8_t r1;
uint16_t retry;
/* Card enable, Prepare to read */
_card_enable();
/* Wait start-token 0xFE */
for(retry = 0; retry < 2000; retry++)
{
r1 = _spi_read_write(DUMMY_BYTE);
if(r1 == 0xFE)
{
retry = 0;
break;
}
}
/* Timeout return */
if(retry == 2000)
{
_card_disable();
return 1;
}
/* Start reading */
for(retry = 0; retry < len; retry++)
{
*(buff + retry) = _spi_read_write(DUMMY_BYTE);
}
/* 2bytes dummy CRC */
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
/* chip disable and dummy byte */
if(release)
{
_card_disable();
_spi_read_write(DUMMY_BYTE);
}
return 0;
}
/*******************************************************************************
* Function Name : MSD_ReadMultiBlock
* Description : None
* Input : - sector:
* - buffer:
* - NbrOfSector:
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
int MSD_ReadMultiBlock(uint32_t sector, uint8_t *buffer, uint32_t NbrOfSector)
{
uint8_t r1;
uint32_t i;
/* if ver = SD2.0 HC, sector need <<9 */
if(CardInfo.CardType != CARDTYPE_SDV2HC)
{
sector = sector<<9;
}
/* Send CMD18 : Read multi block command */
r1 = _send_command(CMD18, sector, 0);
if(r1 != 0x00)
{
return 1;
}
/* Start read */
for(i=0; i<NbrOfSector; i++)
{
if(_read_buffer(buffer+i*MSD_BLOCKSIZE, MSD_BLOCKSIZE, HOLD))
{
/* Send stop data transmit command - CMD12 */
_send_command(CMD12, 0, 0);
/* chip disable and dummy byte */
_card_disable();
return 2;
}
}
/* Send stop data transmit command - CMD12 */
_send_command(CMD12, 0, 0);
/* chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
return 0;
}
/*****************************************************************************
Send a Command to Flash card and get a Response
cmd: cmd index
arg: argument for the cmd
return the received response of the commond
*****************************************************************************/
static rt_uint8_t _spi_sd_sendcmd( rt_uint8_t cmd, rt_uint32_t arg, rt_uint8_t crc )
{
rt_uint32_t n;
rt_uint8_t r1;
#if 1
if( cmd & 0x80 ) /* ACMD<n> is the command sequence of CMD55-CMD<n> */
{
cmd &= 0x7F;
r1 = _spi_sd_sendcmd( APP_CMD, 0, DUMMY_CRC ); /* CMD55 */
if( r1 > 1 )
{
return r1; /* cmd send failed */
}
}
#endif
/* Select the card and wait for ready */
// LPC17xx_SPI_DeSelect();
// LPC17xx_SPI_Select();
// if (_spi_sd_wait4ready() == false ) return 0xFF;
_spi_send_recv( DUMMY_BYTE );
_card_enable( );
_spi_send_recv( cmd );
_spi_send_recv( arg >> 24 );
_spi_send_recv( arg >> 16 );
_spi_send_recv( arg >> 8 );
_spi_send_recv( arg );
_spi_send_recv( crc );
#if 0
n = 10; /* Wait for a valid response in timeout of 10 attempts */
do
{
r1 = _spi_send_recv( DUMMY_BYTE );
}
while( ( r1 & 0x80 ) && --n );
#endif
#if 1
for( n = 0; n < 200; n++ )
{
r1 = _spi_send_recv( DUMMY_BYTE );
if( r1 != 0xFF )
{
break;
}
}
#endif
_card_disable( );
_spi_send_recv( DUMMY_BYTE );
return r1; /* Return with the response value */
}
/* Read MMC/SD Card device configuration. */
static rt_uint8_t _spi_sd_readcfg( SDCFG *cfg )
{
rt_uint8_t i;
rt_uint16_t csize;
rt_uint8_t n, csd[16];
rt_uint8_t retv = false;
/* Read the OCR - Operations Condition Register. */
if( _spi_sd_sendcmd_hold( READ_OCR, 0, DUMMY_CRC ) != 0x00 )
{
goto x;
}
for( i = 0; i < 4; i++ )
{
cfg->ocr[i] = _spi_send_recv( DUMMY_BYTE );
}
_card_disable( );
_spi_send_recv( DUMMY_BYTE );
/* Read the CID - Card Identification. */
if( _spi_sd_sendcmd_hold( SEND_CID, 0, DUMMY_CRC ) != 0x00 )
{
goto x;
}
if( _spi_sd_readdatablock( cfg->cid, 16, RELEASE ) == false )
{
goto x;
}
rt_kprintf("\r\nCID=");
for (i=0;i<16;i++) rt_kprintf("%02x ",cfg->cid[i]);
/* Read the CSD - Card Specific Data. */
if( ( _spi_sd_sendcmd_hold( SEND_CSD, 0, DUMMY_CRC ) != 0x00 ) ||
( _spi_sd_readdatablock( cfg->csd, 16, RELEASE ) == false ) )
{
goto x;
}
rt_kprintf("\r\nCSD=");
for (i=0;i<16;i++) rt_kprintf("%02x ",cfg->csd[i]);
cfg->sectorsize = SD_SECTOR_SIZE;
/* Get number of sectors on the disk (DWORD) */
if( ( cfg->csd[0] >> 6 ) == 1 ) /* SDC ver 2.00 */
{
csize = cfg->csd[9] + ( (rt_uint16_t)cfg->csd[8] << 8 ) + 1;
cfg->sectorcnt = (rt_uint32_t)csize << 10;
} else /* SDC ver 1.XX or MMC*/
{
/***********************************************************
* Function:
* Description:
* Input:
* Input:
* Output:
* Return:
* Others:
***********************************************************/
static rt_uint8_t _spi_sd_readdatablock( rt_uint8_t *buff, rt_uint32_t cnt, rt_uint8_t release )
{
rt_uint8_t r1;
rt_uint16_t retry;
_card_enable( );
for( retry = 0; retry < 2000; retry++ )
{
r1 = _spi_send_recv( DUMMY_BYTE );
if( r1 == 0xFE )
{
retry = 0;
break;
}
}
if( retry == 2000 )
{
_card_disable( );
return false;
}
for( retry = 0; retry < cnt; retry++ )
{
*( buff + retry ) = _spi_send_recv( DUMMY_BYTE );
}
// 2bytes dummy CRC
_spi_send_recv( DUMMY_BYTE );
_spi_send_recv( DUMMY_BYTE );
// chip disable and dummy byte
if( release )
{
_card_disable( );
_spi_send_recv( DUMMY_BYTE );
}
return true;
}
void _spi1_init( )
{
SPI_InitTypeDef SPI_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd( RCC_APB2Periph_SPI1, ENABLE );
RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOA, ENABLE );
GPIO_PinAFConfig( GPIOA, GPIO_PinSource5, GPIO_AF_SPI1 );
GPIO_PinAFConfig( GPIOA, GPIO_PinSource6, GPIO_AF_SPI1 );
GPIO_PinAFConfig( GPIOA, GPIO_PinSource7, GPIO_AF_SPI1 );
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7;
GPIO_Init( GPIOA, &GPIO_InitStructure );
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init( GPIOA, &GPIO_InitStructure );
//_card_power_off();
_card_disable( );
SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
// SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
// SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256;
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
SPI_InitStructure.SPI_CRCPolynomial = 7;
SPI_Init( SPI1, &SPI_InitStructure );
SPI_Cmd( SPI1, ENABLE );
}
/*****************************************************************************
Write "count" Sector(s) starting from sector index "sector",
buff -> [sector, sector+1, ... sector+count-1]
if success, return true, otherwise return false
*****************************************************************************/
static rt_uint8_t _spi_sd_writesector( rt_uint32_t sector, const rt_uint8_t *buff, rt_uint32_t count )
{
if( !( CardType & CT_BLOCK ) )
{
sector *= 512; /* Convert to byte address if needed */
}
if( count == 1 ) /* Single block write */
{
if( ( _spi_sd_sendcmd( WRITE_BLOCK, sector, DUMMY_CRC ) == 0 )
&& _spi_sd_writedatablock( buff, TOKEN_SINGLE_BLOCK ) )
{
count = 0;
}
} else /* Multiple block write */
{
if( CardType & CT_SDC )
{
_spi_sd_sendcmd( SET_WR_BLK_ERASE_COUNT, count, DUMMY_CRC );
}
if( _spi_sd_sendcmd( WRITE_MULT_BLOCK, sector, DUMMY_CRC ) == 0 )
{
do
{
if( !_spi_sd_writedatablock( buff, TOKEN_MULTI_BLOCK ) )
{
break;
}
buff += 512;
}
while( --count );
#if 1
if( !_spi_sd_writedatablock( 0, TOKEN_STOP_TRAN ) ) /* STOP_TRAN token */
{
count = 1;
}
#else
_spi_send_recv( TOKEN_STOP_TRAN );
#endif
}
}
//LPC17xx_SPI_Release();
//SPI_SSOutputCmd(SPI1,DISABLE);
_card_disable( );
_spi_send_recv( DUMMY_BYTE );
return count ? false : true;
}
/*****************************************************************************
Read "count" Sector(s) starting from sector index "sector",
buff <- [sector, sector+1, ... sector+count-1]
if success, return true, otherwise return false
*****************************************************************************/
static rt_uint8_t _spi_sd_readsector( rt_uint32_t sector, rt_uint8_t * buff, rt_uint32_t count )
{
/* Convert to byte address if needed */
if( !( CardType & CT_BLOCK ) )
{
sector *= SD_SECTOR_SIZE;
}
if( count == 1 ) /* Single block read */
{
if( _spi_sd_sendcmd_hold( READ_BLOCK, sector, DUMMY_CRC ) != 0x0 )
{
return false;
}
if( !_spi_sd_readdatablock( buff, SD_SECTOR_SIZE, RELEASE ) )
{
return false;
}
//if (_spi_sd_sendcmd(STOP_TRAN, 0,DUMMY_CRC) != 0x0) return false;
return true;
} else /* Multiple block read */
{
if( !_spi_sd_sendcmd( READ_MULT_BLOCK, sector, DUMMY_CRC ) )
{
return false;
}
do
{
if( !_spi_sd_readdatablock( buff, SD_SECTOR_SIZE, HOLD ) )
{
return false;
}
buff += SD_SECTOR_SIZE;
}
while( --count );
_spi_sd_sendcmd( STOP_TRAN, 0, DUMMY_CRC ); /* STOP_TRANSMISSION */
}
//LPC17xx_SPI_Release();
//SPI_SSOutputCmd(SPI1,DISABLE);
_card_disable( );
_spi_send_recv( DUMMY_BYTE );
return true;
}
/*******************************************************************************
* Function Name : MSD_SPI_Configuration
* Description : SD Card SPI Configuration
* Input : None
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
void MSD_SPI_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO, ENABLE);
/* SPI1 Remap enable */
// GPIO_PinRemapConfig(GPIO_Remap_SPI1, ENABLE );
/**
* SPI1_SCK -> PA5 , SPI1_MISO -> PA6 , SPI1_MOSI -> PA7
*/
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/**
* SD_CS -> PA4
*/
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/**
* SD_CD -> PB0
*/
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
GPIO_Init(GPIOB, &GPIO_InitStructure);
_card_disable();
MSD_SPIHighSpeed(0);
SPI_Cmd(SPI1, ENABLE);
}
/*******************************************************************************
* Function Name : MSD_ReadSingleBlock
* Description : None
* Input : - sector:
* - buffer:
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
int MSD_ReadSingleBlock_DMA(uint32_t sector, uint8_t *buffer)
{
DMA_InitTypeDef DMA_InitStructure;
u8 rvalue = MSD_RESPONSE_FAILURE;
uint8_t r1;
uint16_t retry;
char DuumyClock = DUMMY_BYTE;
if(CardInfo.CardType != CARDTYPE_SDV2HC)
{
sector = sector << 9;
}
/*initial dma channel 2*/
DMA_DeInit(DMA1_Channel4);
DMA_DeInit(DMA1_Channel5);
DMA_InitStructure.DMA_PeripheralBaseAddr = (u32)&SPI2->DR;
DMA_InitStructure.DMA_MemoryBaseAddr = (u32)buffer;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
DMA_InitStructure.DMA_BufferSize = 200;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
DMA_Init(DMA1_Channel4, &DMA_InitStructure);
DMA_InitStructure.DMA_MemoryBaseAddr = (u32)&DuumyClock; //512字节的dummy
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
DMA_InitStructure.DMA_Priority = DMA_Priority_Low;
DMA_Init(DMA1_Channel5, &DMA_InitStructure);
SPI_I2S_DMACmd(SPI2, SPI_I2S_DMAReq_Tx, ENABLE);
SPI_I2S_DMACmd(SPI2, SPI_I2S_DMAReq_Rx, ENABLE);
// DMA_ClearFlag(DMA_FLAG_TC2);
/* Send CMD17 : Read single block command */
r1 = _send_command(CMD17, sector, 0);
if(r1 != 0x00)
{
return 1;
}
/* Card enable, Prepare to read */
_card_enable();
/* Wait start-token 0xFE */
for(retry = 0; retry < 2000; retry++)
{
r1 = _spi_read_write(DUMMY_BYTE);
if(r1 == 0xFE)
{
retry = 0;
break;
}
}
/* Timeout return */
if(retry == 2000)
{
_card_disable();
return 1;
}
DMA_Cmd(DMA1_Channel5, ENABLE);
DMA_Cmd(DMA1_Channel4, ENABLE);
while(!DMA_GetFlagStatus(DMA1_FLAG_TC5));
while(!DMA_GetFlagStatus(DMA1_FLAG_TC4));
DMA_ClearFlag(DMA1_FLAG_TC4);
/* 2bytes dummy CRC */
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
/* chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
/* Set response value to success */
rvalue = MSD_RESPONSE_NO_ERROR;
DMA_Cmd(DMA1_Channel4, DISABLE);
DMA_Cmd(DMA1_Channel5, DISABLE);
/* Returns the reponse */
return rvalue;
}
/*******************************************************************************
* Function Name : MSD_Init
* Description : SD Card initializtion
* Input : None
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
int MSD_Init(void)
{
uint8_t r1;
uint8_t buff[6] = {0};
uint16_t retry;
uint16_t retry_time = 5;
// uint32 lu32SDStatus = 0;
// uint8 err;
gu8SDStatus = 0;
/* Check , if no card insert */
//if( _card_insert() )
//{
/* FATFS error flag */
//return -1;
//}
/* Power on and delay some times */
for(retry = 0; retry < 0x100; retry++)
{
_card_power_on();
}
/* Satrt send 74 clocks at least */
for(retry = 0; retry < 10; retry++)
{
_spi_read_write(DUMMY_BYTE);
}
/* Start send CMD0 till return 0x01 means in IDLE state */
/*begin:yangfei modified 2013-09-28 for SD卡重试次数太多，等待时间太长，SD卡正常的时候只需1次就能成功*/
#if 0
for(retry = 0; retry < 0xFFF; retry++)
#else
for(retry = 0; retry < retry_time; retry++)
#endif
{
r1 = _send_command(CMD0, 0, 0x95);
if(r1 == 0x01)
{
retry = 0;
break;
}
}
/* Timeout return */
#if 0
if(retry == 0xFFF)
#else
if(retry == retry_time)
#endif
{
gu8SDStatus = 1;
return 1;
}
/*end:yangfei modified 2013-09-28 for SD卡重试次数太多，等待时间太长，SD卡正常的时候只需1次就能成功*/
/* Get the card type, version */
r1 = _send_command_hold(CMD8, 0x1AA, 0x87);
/* r1=0x05 -> V1.0 */
if(r1 == 0x05)
{
CardInfo.CardType = CARDTYPE_SDV1;
/* End of CMD8, chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
/* SD1.0/MMC start initialize */
/* Send CMD55+ACMD41, No-response is a MMC card, otherwise is a SD1.0 card */
for(retry = 0; retry < 0xFFF; retry++)
{
r1 = _send_command(CMD55, 0, 0); /* should be return 0x01 */
if(r1 != 0x01)
{
return r1;
}
r1 = _send_command(ACMD41, 0, 0); /* should be return 0x00 */
if(r1 == 0x00)
{
retry = 0;
break;
}
}
/* MMC card initialize start */
if(retry == 0xFFF)
{
for(retry = 0; retry < 0xFFF; retry++)
{
r1 = _send_command(CMD1, 0, 0); /* should be return 0x00 */
if(r1 == 0x00)
{
retry = 0;
break;
}
}
/* Timeout return */
if(retry == 0xFFF)
{
gu8SDStatus = 2;
return 2;
}
CardInfo.CardType = CARDTYPE_MMC;
}
/* Set spi speed high */
MSD_SPIHighSpeed(1);
/* CRC disable */
r1 = _send_command(CMD59, 0, 0x01);
if(r1 != 0x00)
{
return r1; /* response error, return r1 */
}
/* Set the block size */
r1 = _send_command(CMD16, MSD_BLOCKSIZE, 0xFF);
if(r1 != 0x00)
{
return r1; /* response error, return r1 */
}
}
/* r1=0x01 -> V2.x, read OCR register, check version */
else if(r1 == 0x01)
{
/* 4Bytes returned after CMD8 sent */
buff[0] = _spi_read_write(DUMMY_BYTE); /* should be 0x00 */
buff[1] = _spi_read_write(DUMMY_BYTE); /* should be 0x00 */
buff[2] = _spi_read_write(DUMMY_BYTE); /* should be 0x01 */
buff[3] = _spi_read_write(DUMMY_BYTE); /* should be 0xAA */
/* End of CMD8, chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
/* Check voltage range be 2.7-3.6V */
if(buff[2] == 0x01 && buff[3] == 0xAA)
{
for(retry = 0; retry < 0xFFF; retry++)
{
r1 = _send_command(CMD55, 0, 0); /* should be return 0x01 */
if(r1 != 0x01)
{
return r1;
}
r1 = _send_command(ACMD41, 0x40000000, 0); /* should be return 0x00 */
if(r1 == 0x00)
{
retry = 0;
break;
}
}
/* Timeout return */
if(retry == 0xFFF)
{
gu8SDStatus = 3;
return 3;
}
/* Read OCR by CMD58 */
r1 = _send_command_hold(CMD58, 0, 0);
if(r1 != 0x00)
{
return r1; /* response error, return r1 */
}
buff[0] = _spi_read_write(DUMMY_BYTE);
buff[1] = _spi_read_write(DUMMY_BYTE);
buff[2] = _spi_read_write(DUMMY_BYTE);
buff[3] = _spi_read_write(DUMMY_BYTE);
/* End of CMD58, chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
/* OCR -> CCS(bit30) 1: SDV2HC 0: SDV2 */
if(buff[0] & 0x40)
{
CardInfo.CardType = CARDTYPE_SDV2HC;
}
else
{
CardInfo.CardType = CARDTYPE_SDV2;
}
/* Set spi speed high */
MSD_SPIHighSpeed(1);
}
}
return 0;
}
/*******************************************************************************
* Function Name : MSD_WriteMultipleBlock
* Description : None
* Input : - sector:
* - buffer:
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
int MSD_WriteMultipleBlock(uint32_t sector, uc8 *buffer, uint8_t count)
{
uint8_t r1;
uint16_t i;
uint32_t retry;
/* if ver = SD2.0 HC, sector need <<9 */
if(CardInfo.CardType != CARDTYPE_SDV2HC)
{
sector = sector << 9;
}
if(CardInfo.CardType != CARDTYPE_MMC)
{
_send_command(ACMD23, count, 0);
}
/* Send CMD25 : Write multiple block command */
r1 = _send_command(CMD25, sector, 0);
if(r1 != 0x00)
{
return 1;
}
/* Card enable, Prepare to write */
_card_enable();
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
/* Start data write token: 0xFE */
//_spi_read_write(0xFE);
do
{
_spi_read_write(0xFC);
for(i = 0; i < MSD_BLOCKSIZE; i++)
{
_spi_read_write(*buffer++);
}
/* 2Bytes dummy CRC */
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
/* MSD card accept the data */
r1 = _spi_read_write(DUMMY_BYTE);
if((r1 & 0x1F) != 0x05)
{
_card_disable();
return 2;
}
/* Wait all the data programm finished */
retry = 0;
while(_spi_read_write(DUMMY_BYTE) == 0x00)
{
/* Timeout return */
if(retry++ == 0x40000)
{
_card_disable();
return 3;
}
}
}
while (--count);
r1 = _spi_read_write(0xFD);
if(r1 == 0x00)
{
return 4;
}
/* Wait all the data programm finished */
retry = 0;
while(_spi_read_write(DUMMY_BYTE) == 0x00)
{
/* Timeout return */
if(retry++ == 0x40000)
{
_card_disable();
return 5;
}
}
/* chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
return count;
}
/************************************************************************************
* Function Name : MSD_WriteMultipleBlock_DMA(uint32_t sector, uc8 *buffer，u16 NumByteToWrite)
* Description : None
* Input : - sector:
* - buffer:
* Output : None
* Return : None
* Attention : None
************************************************************************************/
int MSD_WriteMultipleBlock_DMA(uint32_t sector, uc8 *buffer, u8 NbrOfSector, u16 NumByteToWrite)
{
uint8 r1;
// uint16_t i=0;
uint32_t retry;
u8 value = 0;
// INT8U err;
u8 rvalue = MSD_RESPONSE_FAILURE;
DMA_InitTypeDef DMA_InitStructure; //定义DMA初始化结构体
/*begin:yangfei added 2012.11.29*/
// debug("MSD_WriteMultipleBlock_DMA\r\n");
_card_enable();
DMA_DeInit(DMA1_Channel5);
DMA_InitStructure.DMA_PeripheralBaseAddr = (u32)&SPI2->DR;
DMA_InitStructure.DMA_MemoryBaseAddr = (u32)buffer;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
DMA_InitStructure.DMA_BufferSize = NumByteToWrite;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_Medium;
DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
DMA_Init(DMA1_Channel5, &DMA_InitStructure);
/* Enable DMA1 Channel5 Transfer Complete interrupt */
DMA_ITConfig(DMA1_Channel5, DMA_IT_TC, ENABLE);
SPI_I2S_DMACmd(SPI2, SPI_I2S_DMAReq_Tx, ENABLE);
/*end:yangfei added 2012.11.29*/
//SPI_DMA_Send_Init(buffer,MSD_BLOCKSIZE);
/* if ver = SD2.0 HC, sector need <<9 */
if(CardInfo.CardType != CARDTYPE_SDV2HC)
{
sector = sector << 9;
}
if(CardInfo.CardType != CARDTYPE_MMC)
{
_send_command(ACMD23, NbrOfSector, 0);
}
/* Send CMD25 : Write multiple block command */
MSD_SendCmd(CMD25, sector, 0xff);
//_spi_read_write(DUMMY_BYTE);
//_spi_read_write(DUMMY_BYTE);
if (!MSD_GetResponse(MSD_RESPONSE_NO_ERROR))
{
_spi_read_write(DUMMY_BYTE);
/* Start data write token: 0xFE */
_spi_read_write(0xFC);
/*begin:yangfei added 2012.11.28*/
DMA_Cmd(DMA1_Channel5, ENABLE);
#ifdef DMA1_IRQ
OSFlagPend(Sem_SD_DMA, (OS_FLAGS)1, OS_FLAG_WAIT_SET_ALL, 0, &err); //请求信号量集的第0位置1
DMA_ClearFlag(DMA1_FLAG_TC5);
#else
while(!DMA_GetFlagStatus(DMA1_FLAG_TC5)) ;
DMA_ClearFlag(DMA1_FLAG_TC5);
#endif
/* 2Bytes dummy CRC */
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
value = MSD_GetDataResponse();
if (value == MSD_DATA_OK)
{
rvalue = MSD_RESPONSE_NO_ERROR;
}
// debug("value=%x\r\n",value);
}
/* Send end of transmit token: 0xFD */
r1 = _spi_read_write(0xFD);
if(r1 == 0x00)
{
return 4;
}
/*begin:yangfei added 2012.12.07 for wait programm finished else write error*/
/* Wait all the data programm finished */
retry = 0;
while(_spi_read_write(DUMMY_BYTE) == 0x00)
{
/* Timeout return */
if(retry++ == 0x40000)
{
_card_disable();
return 3;
}
}
/* chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
/*yangfei added*/
DMA_Cmd(DMA1_Channel5, DISABLE);
return rvalue;
}
/*******************************************************************************
* Function Name : MSD_WriteMultiBlock
* Description : None
* Input : - sector:
* - buffer:
* - NbrOfSector:
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
int MSD_WriteMultiBlock(uint32_t sector, uc8 *buffer, uint32_t NbrOfSector)
{
uint8_t r1;
uint16_t i;
uint32_t n;
uint32_t retry;
/* if ver = SD2.0 HC, sector need <<9 */
if(CardInfo.CardType != CARDTYPE_SDV2HC)
{
sector = sector<<9;
}
/* Send command ACMD23 berfore multi write if is not a MMC card */
if(CardInfo.CardType != CARDTYPE_MMC)
{
_send_command(ACMD23, NbrOfSector, 0x00);
}
/* Send CMD25 : Write nulti block command */
r1 = _send_command(CMD25, sector, 0);
if(r1 != 0x00)
{
return 1;
}
/* Card enable, Prepare to write */
_card_enable();
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
for(n=0; n<NbrOfSector; n++)
{
/* Start multi block write token: 0xFC */
_spi_read_write(0xFC);
for(i=0; i<MSD_BLOCKSIZE; i++)
{
_spi_read_write(*buffer++);
}
/* 2Bytes dummy CRC */
_spi_read_write(DUMMY_BYTE);
_spi_read_write(DUMMY_BYTE);
/* MSD card accept the data */
r1 = _spi_read_write(DUMMY_BYTE);
if((r1&0x1F) != 0x05)
{
_card_disable();
return 2;
}
/* Wait all the data programm finished */
retry = 0;
while(_spi_read_write(DUMMY_BYTE) != 0xFF)
{
/* Timeout return */
if(retry++ == 0x40000)
{
_card_disable();
return 3;
}
}
}
/* Send end of transmit token: 0xFD */
r1 = _spi_read_write(0xFD);
if(r1 == 0x00)
{
return 4;
}
/* Wait all the data programm finished */
retry = 0;
while(_spi_read_write(DUMMY_BYTE) != 0xFF)
{
/* Timeout return */
if(retry++ == 0x40000)
{
_card_disable();
return 5;
}
}
/* chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
return 0;
}
/*******************************************************************************
* Function Name : MSD_Init
* Description : SD Card initializtion
* Input : None
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
int MSD_Init(void) {
uint8_t r1;
uint8_t buff[6] = {0};
uint16_t retry;
/* Check , if no card insert
if( _card_insert() )
{
#ifdef PRINT_INFO
printf("There is no card detected! \r\n");
#endif
// FATFS error flag
return -1;
}*/
/* Power on and delay some times */
for(retry=0; retry<0x100; retry++) {
_card_power_on();
}
/* Satrt send 74 clocks at least */
for(retry=0; retry<10; retry++) {
_spi_read_write(DUMMY_BYTE);
}
/* Start send CMD0 till return 0x01 means in IDLE state */
for(retry=0; retry<0xFFF; retry++) {
r1 = _send_command(CMD0, 0, 0x95);
if(r1 == 0x01) {
retry = 0;
break;
}
}
/* Timeout return */
if(retry == 0xFFF) {
#ifdef PRINT_INFO
printf("Reset card into IDLE state failed!\r\n");
#endif
return 1;
}
/* Get the card type, version */
r1 = _send_command_hold(CMD8, 0x1AA, 0x87);
/* r1=0x05 -> V1.0 */
if(r1 == 0x05) {
CardInfo.CardType = CARDTYPE_SDV1;
/* End of CMD8, chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
/* SD1.0/MMC start initialize */
/* Send CMD55+ACMD41, No-response is a MMC card, otherwise is a SD1.0 card */
for(retry=0; retry<0xFFF; retry++) {
r1 = _send_command(CMD55, 0, 0); /* should be return 0x01 */
if(r1 != 0x01) {
#ifdef PRINT_INFO
printf("Send CMD55 should return 0x01, response=0x%02x\r\n", r1);
#endif
return r1;
}
r1 = _send_command(ACMD41, 0, 0); /* should be return 0x00 */
if(r1 == 0x00) {
retry = 0;
break;
}
}
/* MMC card initialize start */
if(retry == 0xFFF) {
for(retry=0; retry<0xFFF; retry++) {
r1 = _send_command(CMD1, 0, 0); /* should be return 0x00 */
if(r1 == 0x00) {
retry = 0;
break;
}
}
/* Timeout return */
if(retry == 0xFFF) {
#ifdef PRINT_INFO
printf("Send CMD1 should return 0x00, response=0x%02x\r\n", r1);
#endif
return 2;
}
CardInfo.CardType = CARDTYPE_MMC;
#ifdef PRINT_INFO
printf("Card Type : MMC\r\n");
#endif
}
/* SD1.0 card detected, print information */
#ifdef PRINT_INFO
else {
printf("Card Type : SD V1\r\n");
}
#endif
/* Set spi speed high */
MSD_SPIHighSpeed(1);
/* CRC disable */
r1 = _send_command(CMD59, 0, 0x01);
if(r1 != 0x00) {
#ifdef PRINT_INFO
printf("Send CMD59 should return 0x00, response=0x%02x\r\n", r1);
#endif
return r1; /* response error, return r1 */
}
/* Set the block size */
r1 = _send_command(CMD16, MSD_BLOCKSIZE, 0xFF);
if(r1 != 0x00) {
#ifdef PRINT_INFO
printf("Send CMD16 should return 0x00, response=0x%02x\r\n", r1);
#endif
return r1; /* response error, return r1 */
}
/* r1=0x01 -> V2.x, read OCR register, check version */
} else if(r1 == 0x01) {
/* 4Bytes returned after CMD8 sent */
buff[0] = _spi_read_write(DUMMY_BYTE); /* should be 0x00 */
buff[1] = _spi_read_write(DUMMY_BYTE); /* should be 0x00 */
buff[2] = _spi_read_write(DUMMY_BYTE); /* should be 0x01 */
buff[3] = _spi_read_write(DUMMY_BYTE); /* should be 0xAA */
/* End of CMD8, chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
/* Check voltage range be 2.7-3.6V */
if(buff[2]==0x01 && buff[3]==0xAA) {
for(retry=0; retry<0xFFF; retry++) {
r1 = _send_command(CMD55, 0, 0); /* should be return 0x01 */
if(r1!=0x01) {
#ifdef PRINT_INFO
printf("Send CMD55 should return 0x01, response=0x%02x\r\n", r1);
#endif
return r1;
}
r1 = _send_command(ACMD41, 0x40000000, 0); /* should be return 0x00 */
if(r1 == 0x00) {
retry = 0;
break;
}
}
/* Timeout return */
if(retry == 0xFFF) {
#ifdef PRINT_INFO
printf("Send ACMD41 should return 0x00, response=0x%02x\r\n", r1);
#endif
return 3;
}
/* Read OCR by CMD58 */
r1 = _send_command_hold(CMD58, 0, 0);
if(r1!=0x00)
{
#ifdef PRINT_INFO
printf("Send CMD58 should return 0x00, response=0x%02x\r\n", r1);
#endif
return r1; /* response error, return r1 */
}
buff[0] = _spi_read_write(DUMMY_BYTE);
buff[1] = _spi_read_write(DUMMY_BYTE);
buff[2] = _spi_read_write(DUMMY_BYTE);
buff[3] = _spi_read_write(DUMMY_BYTE);
/* End of CMD58, chip disable and dummy byte */
_card_disable();
_spi_read_write(DUMMY_BYTE);
/* OCR -> CCS(bit30) 1: SDV2HC 0: SDV2 */
if(buff[0] & 0x40) {
CardInfo.CardType = CARDTYPE_SDV2HC;
#ifdef PRINT_INFO
printf("Card Type : SD V2HC\r\n");
#endif
} else {
CardInfo.CardType = CARDTYPE_SDV2;
#ifdef PRINT_INFO
printf("Card Type : SD V2\r\n");
#endif
}
/* Set spi speed high */
MSD_SPIHighSpeed(1);
}
}
return 0;
}