/*FUNCTION*-------------------------------------------------------------------
*
* Function Name : _bsp_usb_dev_init
* Returned Value : 0 for success, -1 for failure
* Comments :
* This function performs BSP-specific initialization related to USB device
*
*END*----------------------------------------------------------------------*/
_mqx_int _bsp_usb_dev_init
(
struct usb_dev_if_struct *usb_if
)
{ /* Body */
VMCF5301_STRUCT_PTR reg_ptr = _PSP_GET_IPSBAR();
uint_32 status;
_bsp_usb_io_init(0);
/* setup interrupt */
status = _mcf5301_int_init(MCF5301_INT1_USB, 2, TRUE);
if (status != MQX_OK) {
return -1;
}
return MQX_OK;
} /* Endbody */
uint_32 _bsp_enable_card
(
void
)
{ /* Body */
KERNEL_DATA_STRUCT_PTR kernel_data;
uint_32 result;
_mqx_int i;
/* Set the CPU type */
_mqx_set_cpu_type(MQX_CPU);
/* Set the bsp exit handler, called by _mqx_exit */
_mqx_set_exit_handler(_bsp_exit_handler);
/* Initialize the MCF5301x support functions */
_mcf5301_initialize_support(0);
/*
** Initialize the interrupt handling
*/
_int_set_vector_table(BSP_RAM_INTERRUPT_VECTOR_TABLE);
result = _psp_int_init(BSP_FIRST_INTERRUPT_VECTOR_USED,
BSP_LAST_INTERRUPT_VECTOR_USED);
if (result != MQX_OK) {
return result;
} /* Endif */
/* Initialize the timer interrupt */
_time_set_timer_vector(BSP_TIMER_INTERRUPT_VECTOR);
if (_int_install_isr(BSP_TIMER_INTERRUPT_VECTOR, (void (_CODE_PTR_)(pointer))_bsp_timer_isr, NULL) == NULL) {
return MQX_TIMER_ISR_INSTALL_FAIL;
} /* Endif */
_GET_KERNEL_DATA(kernel_data);
/*
** Initialize the slice timer to interrupt the specified
** number of times per second
*/
kernel_data->TIMER_HW_REFERENCE = _mcf5301_timer_init_freq(BSP_TIMER, BSP_ALARM_FREQUENCY, BSP_SYSTEM_CLOCK, FALSE);
_time_set_hwtick_function(_bsp_get_hwticks, 0);
_time_set_hwticks_per_tick(kernel_data->TIMER_HW_REFERENCE);
_time_set_ticks_per_sec(BSP_ALARM_FREQUENCY);
/* Initialize and enable the timer interrupt */
_mcf5301_int_init(BSP_TIMER_INTERRUPT_VECTOR, BSP_TIMER_INTERRUPT_LEVEL, /*BSP_SLICE_TIMER0_INT_PRIORITY, */TRUE);
/* Initialize and enable the serial UART interrupts */
_mcf5301_int_init(BSP_UART0_INT_VECTOR, BSP_UART0_INT_LEVEL, /*BSP_UART0_INT_PRIORITY, */TRUE);
_mcf5301_int_init(BSP_UART1_INT_VECTOR, BSP_UART1_INT_LEVEL, /*BSP_UART1_INT_PRIORITY, */TRUE);
/* Install and mask the DMA interrupt handler */
/*_int_install_isr(BSP_ENET_DMA_INTERRUPT, _mcf5301_dma_isr, (pointer)0);
_mcf5301_int_init(BSP_ENET_DMA_INTERRUPT, BSP_ENET_DMA_INT_LEVEL, BSP_ENET_DMA_INT_PRIORITY, FALSE);
*/
#if BSP_TRAP_EXCEPTIONS
_int_install_unexpected_isr();
#endif
if (_mqx_monitor_type == MQX_MONITOR_TYPE_NONE) {
static const PSP_MMU_INIT_STRUCT mmu_init = {
/* We define the default cacheability of non-ACR mapped regions */
/* as non-cacheable and unbuffered */
MCF53XX_CACR_DCM(MCF53XX_CACHE_NONCACHEABLE_UNBUFFERED)
};
/* Initialize Cache Control Register CACR */
_mmu_init((pointer)&mmu_init);
/* Set up 1 instruction and 1 data ACR in two separate SDRAM areas */
/* Caution: Consider memory map in linker command file before changing regions */
/* Note: Second arg to _mmu_add_region is used in mask value in ACR */
result = _mmu_add_region(__CACHED_CODE_START, __CACHED_CODE_END - __CACHED_CODE_START, PSP_MMU_EXEC_ALLOWED);
if (result != MQX_OK)
return result;
result = _mmu_add_region(__UNCACHED_DATA_START, __UNCACHED_DATA_END - __UNCACHED_DATA_START, PSP_MMU_DATA_CACHE_INHIBITED);
if (result != MQX_OK)
return result;
/* Copy ACR table into ACR registers */
_MMU_ENABLE();
/* Enable cache
** 0 - Instruction cache only
** 1 - Data cache only
** 2 - Both Instruction & Data cache
*/
_CACHE_ENABLE(2);
} /* Endif */
#if BSPCFG_ENABLE_CPP
/* initialize C++ constructors */
__cpp_init();
#endif
/* Initialize RTC and MQX time */
#if BSPCFG_ENABLE_RTCDEV
_bsp_rtc_io_init ();
_rtc_sync_with_mqx (TRUE);
#endif
#if BSPCFG_ENABLE_IO_SUBSYSTEM
/* Initialize the I/O Sub-system */
result = _io_init();
if (result != MQX_OK) {
return result;
} /* Endif */
#if BSPCFG_ENABLE_TTYA
_mcf53xx_uart_serial_polled_install("ttya:", &_bsp_uart0_init, _bsp_uart0_init.QUEUE_SIZE);
#endif
#if BSPCFG_ENABLE_TTYB
_mcf53xx_uart_serial_polled_install("ttyb:", &_bsp_uart1_init, _bsp_uart1_init.QUEUE_SIZE);
#endif
#if BSPCFG_ENABLE_TTYC
_mcf53xx_uart_serial_polled_install("ttyc:", &_bsp_uart2_init, _bsp_uart2_init.QUEUE_SIZE);
#endif
#if BSPCFG_ENABLE_ITTYA
_mcf53xx_uart_serial_int_install("ittya:", &_bsp_uart0_init, _bsp_uart0_init.QUEUE_SIZE);
#endif
#if BSPCFG_ENABLE_ITTYB
_mcf53xx_uart_serial_int_install("ittyb:", &_bsp_uart1_init, _bsp_uart1_init.QUEUE_SIZE);
#endif
#if BSPCFG_ENABLE_ITTYC
_mcf53xx_uart_serial_int_install("ittyc:", &_bsp_uart2_init, _bsp_uart2_init.QUEUE_SIZE);
#endif
#if BSPCFG_ENABLE_I2C0
_mcf53xx_i2c_polled_install("i2c0:", &_bsp_i2c0_init);
#endif
#if BSPCFG_ENABLE_II2C0
_mcf53xx_i2c_int_install("ii2c0:", &_bsp_i2c0_init);
#endif
#if BSPCFG_ENABLE_SPI0
_mcf5xxx_dspi_polled_install("spi0:", &_bsp_dspi0_init);
#endif
#if BSPCFG_ENABLE_ISPI0
_mcf5xxx_dspi_int_install("ispi0:", &_bsp_dspi0_init);
#endif
#if BSPCFG_ENABLE_EXT_FLASH
result = _io_flashx_install(&_bsp_flashx_init);
#endif
/* Initialize the default serial I/O */
_io_serial_default_init();
#endif /* BSPCFG_ENABLE_IO_SUBSYSTEM */
/*#if !BSP_PEG_PCI_ENABLE
Initialize the PCI in master mode. This will enumerate the bus.
_io_pci_init(TRUE);
#endif
*/
/* Install the GPIO driver */
#if BSPCFG_ENABLE_GPIODEV
_io_gpio_install("gpio:");
#endif
#if BSPCFG_ENABLE_ESDHC
_esdhc_install ("esdhc:", &_bsp_esdhc_init);
#endif
return MQX_OK;
} /* Endbody */
