Ejemplo n.º 1
0
/* no-op function for future use */
PAM_EXTERN
int pam_sm_chauthtok(pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl, retval;
    char *user;
    char *pass;
    char *tty;
    char *r_addr;
    const void *pam_pass = NULL;
    int srv_i;
    int tac_fd, status, msg, communicating;

    user = pass = tty = r_addr = NULL;

    ctrl = _pam_parse(argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)"
            , __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    syslog(LOG_DEBUG, "%s(flags=%d, argc=%d)", __func__, flags, argc);

    // read config file
    _read_config(ctrl);

    if (   (pam_get_item(pamh, PAM_OLDAUTHTOK, &pam_pass) == PAM_SUCCESS)
        && (pam_pass != NULL) ) {
         if ((pass = strdup(pam_pass)) == NULL)
              return PAM_BUF_ERR;
    } else {
        pass = strdup("");
    }
    
    if ((user = _pam_get_user(pamh)) == NULL) {
        if(pass) {
                xfree(pass);
        }
        return PAM_USER_UNKNOWN;
    }
    
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: user [%s] obtained", __FUNCTION__, user);

    tty = _pam_get_terminal(pamh);
    if (!strncmp(tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: tty [%s] obtained", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: rhost [%s] obtained", __FUNCTION__, r_addr);

    if (PAM_SILENT == (flags & PAM_SILENT)) {
        status = PAM_AUTHTOK_ERR;
        goto finish;
    }

    status = PAM_TRY_AGAIN;
    for (srv_i = 0; srv_i < tac_srv_no; srv_i++) {
        if (ctrl & PAM_TAC_DEBUG)
            syslog(LOG_DEBUG, "%s: trying srv %d", __FUNCTION__, srv_i );

        tac_fd = tac_connect_single(tac_srv[srv_i].addr, tac_srv[srv_i].key, NULL, tac_timeout);
        if (tac_fd < 0) {
            _pam_log(LOG_ERR, "connection failed srv %d: %m", srv_i);
            continue;
        }
        if (PAM_PRELIM_CHECK == (flags & PAM_PRELIM_CHECK)) {
            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                syslog(LOG_DEBUG, "%s: finishing PAM_PRELIM_CHECK with srv %d",
                       __FUNCTION__, srv_i);

            close(tac_fd);
            status = PAM_SUCCESS;
            goto finish;
        }

        if (tac_authen_send(tac_fd, user, "", tty, r_addr, TAC_PLUS_AUTHEN_CHPASS) < 0) {
            close(tac_fd);
            _pam_log(LOG_ERR, "error sending auth req to TACACS+ server");
            continue;
        }
        communicating = 1;
        while (communicating) {
            struct areply re = { .attr = NULL, .msg = NULL, status = 0, flags = 0 };
            struct pam_message conv_msg = { .msg_style = 0, .msg = NULL };
            struct pam_response *resp = NULL;

            msg = tac_authen_read(tac_fd, &re);

            if (NULL != re.msg) {
                conv_msg.msg = re.msg;
            }

            /* talk the protocol */
            switch (msg) {
                case TAC_PLUS_AUTHEN_STATUS_PASS:
                    /* success */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_PASS");

                    if (NULL != conv_msg.msg) {
                        int retval = -1;

                        conv_msg.msg_style = PAM_TEXT_INFO;
                        retval = converse(pamh, 1, &conv_msg, &resp);
                        if (PAM_SUCCESS == retval) {
                            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                                syslog(LOG_DEBUG, "send msg=\"%s\"", conv_msg.msg);
                        }
                        else {
                            _pam_log(LOG_WARNING, "%s: error sending msg=\"%s\", retval=%d",
                                     __FUNCTION__, conv_msg.msg, retval);
                        }

                    }
                    status = PAM_SUCCESS;
                    communicating = 0;

                    if (active_server.addr != NULL)
                    {
                        xfree(active_server.addr);
                    }
                    active_server.addr = (struct addrinfo*)xcalloc(1, sizeof(struct addrinfo));
                    bcopy(tac_srv[srv_i].addr, active_server.addr, sizeof(struct addrinfo));
                    if (active_server.key != NULL)
                    {
                        xfree(active_server.key);
                    }
                    active_server.key = xstrdup(tac_srv[srv_i].key);

                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "%s: active srv %d", __FUNCTION__, srv_i);

                    break;

                case TAC_PLUS_AUTHEN_STATUS_FAIL:
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_FAIL");

                    if (NULL != conv_msg.msg) {
                        int retval = -1;

                        conv_msg.msg_style = PAM_ERROR_MSG;
                        retval = converse(pamh, 1, &conv_msg, &resp);
                        if (PAM_SUCCESS == retval) {
                            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                                syslog(LOG_DEBUG, "send msg=\"%s\"", conv_msg.msg);
                        }
                        else {
                            _pam_log(LOG_WARNING, "%s: error sending msg=\"%s\", retval=%d",
                                     __FUNCTION__, conv_msg.msg, retval);
                        }

                    }
                    status = PAM_AUTHTOK_ERR;
                    communicating = 0;

                    _pam_log(LOG_ERR, "chauthtok failed: %d", msg);

                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETDATA:
                    if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETDATA");

                    if (NULL != conv_msg.msg) {
                        int retval = -1;
                        int echo_off = (0x1 == (re.flags & 0x1));
                        
                        conv_msg.msg_style = echo_off ? PAM_PROMPT_ECHO_OFF : PAM_PROMPT_ECHO_ON;
                        retval = converse(pamh, 1, &conv_msg, &resp);
                        if (PAM_SUCCESS == retval) {
                            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG)) 
                                syslog(LOG_DEBUG, "sent msg=\"%s\", resp=\"%s\"",
                                       conv_msg.msg, resp->resp);

                            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                                syslog(LOG_DEBUG, "%s: calling tac_cont_send", __FUNCTION__);

                            if (0 > tac_cont_send_seq(tac_fd, resp->resp, re.seq_no + 1)) {
                                _pam_log(LOG_ERR, "error sending continue req to TACACS+ server");
                                communicating = 0;
                            }
                        }
                        else {
                            _pam_log(LOG_WARNING, "%s: error sending msg=\"%s\", retval=%d",
                                     __FUNCTION__, conv_msg.msg, retval);
                            communicating = 0;
                        }
                    }
                    else { 
                        syslog(LOG_ERR, "GETDATA response with no message, returning PAM_TRY_AGAIN");
                        communicating = 0;
                    }

                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETUSER:
                    /* not implemented */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETUSER");

                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETPASS:
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETPASS");

                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "%s: calling tac_cont_send", __FUNCTION__);

                    if (tac_cont_send(tac_fd, pass) < 0) {
                        _pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
                        communicating = 0;
                        break;
                    }
                    /* continue the while loop; go read tac response */
                    break;

                case TAC_PLUS_AUTHEN_STATUS_RESTART:
                    /* try it again */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_RESTART");

                    /*
                     * not implemented
                     * WdJ: I *think* you can just do tac_authen_send(user, pass) again
                     *      but I'm not sure
                     */
                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_ERROR:
                    /* server has problems */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_ERROR");

                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_FOLLOW:
                    /* server tells to try a different server address */
                    /* not implemented */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_FOLLOW");

                    communicating = 0;
                    break;

                default:
                    if (msg < 0) {
                        /* connection error */
                        communicating = 0;
                        if (ctrl & PAM_TAC_DEBUG)
                            syslog(LOG_DEBUG, "error communicating with tacacs server");
                        break;
                    }

                    /* unknown response code */
                    communicating = 0;
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: unknown response 0x%02x", msg);
            }

            if (NULL != resp) {
                xfree(resp->resp);
                xfree(resp);
            }

            xfree(re.msg);

        }    /* end while(communicating) */
        close(tac_fd);

        if (status == PAM_SUCCESS || status == PAM_AUTHTOK_ERR)
            break;
    }

finish:
    if (status != PAM_SUCCESS && status != PAM_AUTHTOK_ERR)
        _pam_log(LOG_ERR, "no more servers to connect");

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: exit with pam status: %d", __FUNCTION__, status);

    if (NULL != pass) {
        bzero(pass, strlen(pass));
        xfree(pass);
        pass = NULL;
    }

    return status;
}    /* pam_sm_chauthtok */
#endif


#ifdef PAM_STATIC
struct pam_module _pam_tacplus_modstruct {
    "pam_tacplus",
    pam_sm_authenticate,
    pam_sm_setcred,
    pam_sm_acct_mgmt,
    pam_sm_open_session,
    pam_sm_close_session,
#ifdef PAM_SM_PASSWORD
    pam_sm_chauthtok
#else
    NULL
#endif
};
Ejemplo n.º 2
0
int _pam_account(pam_handle_t *pamh, int argc, const char **argv,
    int type, char *cmd) {

    int retval;
    static int ctrl;
    char *user = NULL;
    char *tty = NULL;
    char *r_addr = NULL;
    char *typemsg;
    int status = PAM_SESSION_ERR;
    int srv_i, tac_fd;

    typemsg = tac_acct_flag2str(type);
    ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG) {
        syslog (LOG_DEBUG, "%s: [%s] called (pam_tacplus v%u.%u.%u)",
            __FUNCTION__, typemsg, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);
        syslog(LOG_DEBUG, "%s: tac_srv_no=%d", __FUNCTION__, tac_srv_no);
    }

    if ((user = _pam_get_user(pamh)) == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: username [%s] obtained", __FUNCTION__, user);

    // read config file
    _read_config(ctrl);

    tty = _pam_get_terminal(pamh);
    if(!strncmp(tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: tty [%s] obtained", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: rhost [%s] obtained", __FUNCTION__, r_addr);

    /* checks for specific data required by TACACS+, which should
       be supplied in command line  */
    if(*tac_service == '\0') {
        _pam_log (LOG_ERR, "ACC: TACACS+ service type not configured");
        return PAM_AUTH_ERR;
    }
    if(*tac_protocol == '\0') {
        _pam_log (LOG_ERR, "ACC: TACACS+ protocol type not configured (IGNORED)");
    }

    /* when this module is called from within pppd or other
       application dealing with serial lines, it is likely
       that we will get hit with signal caused by modem hangup;
       this is important only for STOP packets, it's relatively
       rare that modem hangs up on accounting start */
    if(type == TAC_PLUS_ACCT_FLAG_STOP) {
        signal(SIGALRM, SIG_IGN);
        signal(SIGCHLD, SIG_IGN);
        signal(SIGHUP, SIG_IGN);
    }

    status = PAM_SESSION_ERR;
    for(srv_i = 0; srv_i < tac_srv_no; srv_i++) {
        tac_fd = tac_connect_single(tac_srv[srv_i].addr, tac_srv[srv_i].key, NULL, tac_timeout);
        if (tac_fd < 0) {
            _pam_log(LOG_WARNING, "%s: error sending %s (fd)",
                __FUNCTION__, typemsg);
            continue;
        }
        if (ctrl & PAM_TAC_DEBUG)
            syslog(LOG_DEBUG, "%s: connected with fd=%d (srv %d)", __FUNCTION__, tac_fd, srv_i);

        retval = _pam_send_account(tac_fd, type, user, tty, r_addr, cmd);
        if (retval < 0) {
            _pam_log(LOG_WARNING, "%s: error sending %s (acct)",
                __FUNCTION__, typemsg);
        } else {
            status = PAM_SUCCESS;
            if (ctrl & PAM_TAC_DEBUG)
                syslog(LOG_DEBUG, "%s: [%s] for [%s] sent", __FUNCTION__, typemsg, user);
        }
        close(tac_fd);

        if ((status == PAM_SUCCESS) && !(ctrl & PAM_TAC_ACCT)) {
            /* do not send acct start/stop packets to _all_ servers */
            break;
        }
    }

    if (type == TAC_PLUS_ACCT_FLAG_STOP) {
        signal(SIGALRM, SIG_DFL);
        signal(SIGCHLD, SIG_DFL);
        signal(SIGHUP, SIG_DFL);
    }
    return status;
}
Ejemplo n.º 3
0
/* authenticates user on remote TACACS+ server
 * returns PAM_SUCCESS if the supplied username and password
 * pair is valid
 */
PAM_EXTERN
int pam_sm_authenticate (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl, retval;
    char *user;
    char *pass;
    char *tty;
    char *r_addr;
    int srv_i;
    int tac_fd, status, msg, communicating;

    user = pass = tty = r_addr = NULL;

    ctrl = _pam_parse(argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)",
            __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    if ((user = _pam_get_user(pamh)) == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: user [%s] obtained", __FUNCTION__, user);

    // read config file
    _read_config(ctrl);
    
    retval = tacacs_get_password (pamh, flags, ctrl, &pass);
    if (retval != PAM_SUCCESS || pass == NULL || *pass == '\0') {
        _pam_log(LOG_ERR, "unable to obtain password");
        xfree(pass);
        return PAM_CRED_INSUFFICIENT;
    }

    retval = pam_set_item (pamh, PAM_AUTHTOK, pass);
    if (retval != PAM_SUCCESS) {
        _pam_log(LOG_ERR, "unable to set password");
        xfree(pass);
        return PAM_CRED_INSUFFICIENT;
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: password obtained", __FUNCTION__);

    tty = _pam_get_terminal(pamh);
    if (!strncmp(tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: tty [%s] obtained", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: rhost [%s] obtained", __FUNCTION__, r_addr);

    status = PAM_AUTHINFO_UNAVAIL;
    for (srv_i = 0; srv_i < tac_srv_no; srv_i++) {
        if (ctrl & PAM_TAC_DEBUG)
            syslog(LOG_DEBUG, "%s: trying srv %d", __FUNCTION__, srv_i );

        tac_fd = tac_connect_single(tac_srv[srv_i].addr, tac_srv[srv_i].key, NULL, tac_timeout);
        if (tac_fd < 0) {
            _pam_log(LOG_ERR, "connection failed srv %d: %m", srv_i);
            continue;
        }
        if (tac_authen_send(tac_fd, user, pass, tty, r_addr, TAC_PLUS_AUTHEN_LOGIN) < 0) {
            close(tac_fd);
            _pam_log(LOG_ERR, "error sending auth req to TACACS+ server");
            continue;
        }
        communicating = 1;
        while (communicating) {
            struct areply re = { .attr = NULL, .msg = NULL, status = 0, flags = 0 };
            struct pam_message conv_msg = { .msg_style = 0, .msg = NULL };
            struct pam_response *resp = NULL;

            msg = tac_authen_read(tac_fd, &re);

            if (NULL != re.msg) {
                conv_msg.msg = re.msg;
            }

            /* talk the protocol */
            switch (msg) {
                case TAC_PLUS_AUTHEN_STATUS_PASS:
                    /* success */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_PASS");
  
                    if (NULL != conv_msg.msg) {
                        int retval = -1;

                        conv_msg.msg_style = PAM_TEXT_INFO;
                        retval = converse(pamh, 1, &conv_msg, &resp);
                        if (PAM_SUCCESS == retval) {
                            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                                syslog(LOG_DEBUG, "send msg=\"%s\"", conv_msg.msg);
                        }
                        else {
                            _pam_log(LOG_WARNING, "%s: error sending msg=\"%s\", retval=%d",
                                     __FUNCTION__, conv_msg.msg, retval);
                        }

                    }
                    status = PAM_SUCCESS;
                    communicating = 0;
                    if (active_server.addr != NULL)
                    {
                        xfree(active_server.addr);
                    }
                    active_server.addr = (struct addrinfo*)xcalloc(1, sizeof(struct addrinfo));
                    bcopy(tac_srv[srv_i].addr, active_server.addr, sizeof(struct addrinfo));
                    if (active_server.key != NULL)
                    {
                        xfree(active_server.key);
                    }
                    active_server.key = xstrdup(tac_srv[srv_i].key);

                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "%s: active srv %d", __FUNCTION__, srv_i);

                    break;

                case TAC_PLUS_AUTHEN_STATUS_FAIL:
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_FAIL");

                    if (NULL != conv_msg.msg) {
                        int retval = -1;

                        conv_msg.msg_style = PAM_ERROR_MSG;
                        retval = converse(pamh, 1, &conv_msg, &resp);
                        if (PAM_SUCCESS == retval) {
                            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                                syslog(LOG_DEBUG, "send msg=\"%s\"", conv_msg.msg);
                        }
                        else {
                            _pam_log(LOG_WARNING, "%s: error sending msg=\"%s\", retval=%d",
                                     __FUNCTION__, conv_msg.msg, retval);
                        }

                    }
                    status = PAM_AUTH_ERR;
                    communicating = 0;

                    _pam_log(LOG_ERR, "auth failed: %d", msg);

                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETDATA:
                    if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETDATA");

                    if (NULL != conv_msg.msg) {
                        int retval = -1;
                        int echo_off = (0x1 == (re.flags & 0x1));
                        
                        conv_msg.msg_style = echo_off ? PAM_PROMPT_ECHO_OFF : PAM_PROMPT_ECHO_ON;
                        retval = converse(pamh, 1, &conv_msg, &resp);
                        if (PAM_SUCCESS == retval) {
                            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG)) 
                                syslog(LOG_DEBUG, "sent msg=\"%s\", resp=\"%s\"",
                                       conv_msg.msg, resp->resp);

                            if (PAM_TAC_DEBUG == (ctrl & PAM_TAC_DEBUG))
                                syslog(LOG_DEBUG, "%s: calling tac_cont_send", __FUNCTION__);

                            if (0 > tac_cont_send_seq(tac_fd, resp->resp, re.seq_no + 1)) {
                                _pam_log(LOG_ERR, "error sending continue req to TACACS+ server");
                                status = PAM_AUTH_ERR;
                                communicating = 0;
                            }
                        }
                        else {
                            _pam_log(LOG_WARNING, "%s: error sending msg=\"%s\", retval=%d (%s)",
                                     __FUNCTION__, conv_msg.msg, retval, pam_strerror(pamh, retval));
                            status = PAM_AUTH_ERR;
                            communicating = 0;
                        }
                    }
                    else { 
                        syslog(LOG_ERR, "GETDATA response with no message, returning PAM_AUTH_ERR");

                        status = PAM_AUTH_ERR;
                        communicating = 0;
                    }

                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETUSER:
                    /* not implemented */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETUSER");

                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETPASS:
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETPASS");

                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);

                    if (tac_cont_send(tac_fd, pass) < 0) {
                        _pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
                        communicating = 0;
                    }
                    /* continue the while loop; go read tac response */
                    break;

                case TAC_PLUS_AUTHEN_STATUS_RESTART:
                    /* try it again */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_RESTART");

                    /*
                     * not implemented
                     * WdJ: I *think* you can just do tac_authen_send(user, pass) again
                     *      but I'm not sure
                     */
                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_ERROR:
                    /* server has problems */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_ERROR");

                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_FOLLOW:
                    /* server tells to try a different server address */
                    /* not implemented */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_FOLLOW");

                    communicating = 0;
                    break;

                default:
                    if (msg < 0) {
                        /* connection error */
                        communicating = 0;
                        if (ctrl & PAM_TAC_DEBUG)
                            syslog(LOG_DEBUG, "error communicating with tacacs server");
                        break;
                    }

                    /* unknown response code */
                    communicating = 0;
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: unknown response 0x%02x", msg);
            }

            if (NULL != resp)
            {
                if (resp->resp != NULL)
                {
                    xfree(resp->resp);
                }
                xfree(resp);
            }
                
            if (re.msg != NULL)
            {
                xfree(re.msg);
            }

        }    /* end while(communicating) */
        close(tac_fd);

        if (status == PAM_SUCCESS || status == PAM_AUTH_ERR)
            break;
    }
    if (status != PAM_SUCCESS && status != PAM_AUTH_ERR)
        _pam_log(LOG_ERR, "no more servers to connect");

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: exit with pam status: %d", __FUNCTION__, status);

    if (NULL != pass) {
        bzero(pass, strlen (pass));
        xfree(pass);
        pass = NULL;
    }

    return status;
}    /* pam_sm_authenticate */


/* no-op function to satisfy PAM authentication module */
PAM_EXTERN
int pam_sm_setcred (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)"
            , __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    return PAM_SUCCESS;
}    /* pam_sm_setcred */


/* authorizes user on remote TACACS+ server, i.e. checks
 * his permission to access requested service
 * returns PAM_SUCCESS if the service is allowed
 */
PAM_EXTERN
int pam_sm_acct_mgmt (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int retval, ctrl, status=PAM_AUTH_ERR;
    char *user;
    char *tty;
    char *r_addr;
    struct areply arep;
    struct tac_attrib *attr = NULL;
    int tac_fd;

    user = tty = r_addr = NULL;
    memset(&arep, 0, sizeof(arep));

    /* this also obtains service name for authorization
       this should be normally performed by pam_get_item(PAM_SERVICE)
       but since PAM service names are incompatible TACACS+
       we have to pass it via command line argument until a better
       solution is found ;) */
    ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)"
            , __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    if ((user = _pam_get_user(pamh)) == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: username obtained [%s]", __FUNCTION__, user);

    // read config file
    _read_config(ctrl);

    tty = _pam_get_terminal(pamh);
    if(!strncmp(tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: tty obtained [%s]", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: rhost obtained [%s]", __FUNCTION__, r_addr);

    /* checks if user has been successfully authenticated
       by TACACS+; we cannot solely authorize user if it hasn't
       been authenticated or has been authenticated by method other
       than TACACS+ */
    if(active_server.addr == NULL) {
        _pam_log (LOG_ERR, "user not authenticated by TACACS+");
        return PAM_AUTH_ERR;
    }
    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: active server is [%s]", __FUNCTION__,
            tac_ntop(active_server.addr->ai_addr));

    /* checks for specific data required by TACACS+, which should
       be supplied in command line  */
    if(!*tac_service) {
        _pam_log (LOG_ERR, "SM: TACACS+ service type not configured");
        return PAM_AUTH_ERR;
    }
    if(!*tac_protocol) {
        _pam_log (LOG_ERR, "SM: TACACS+ protocol type not configured (IGNORED)");
    }

    tac_add_attrib(&attr, "service", tac_service);
    if(tac_protocol[0] != '\0')
        tac_add_attrib(&attr, "protocol", tac_protocol);
    
    tac_fd = tac_connect_single(active_server.addr, active_server.key, NULL, tac_timeout);
    if(tac_fd < 0) {
        _pam_log (LOG_ERR, "TACACS+ server unavailable");
        if(arep.msg != NULL)
            xfree (arep.msg);
        return PAM_AUTH_ERR;
    }

    retval = tac_author_send(tac_fd, user, tty, r_addr, attr);

    tac_free_attrib(&attr);

    if(retval < 0) {
        _pam_log (LOG_ERR, "error getting authorization");
        if(arep.msg != NULL)
            xfree (arep.msg);

        close(tac_fd);
        return PAM_AUTH_ERR;
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: sent authorization request", __FUNCTION__);

    tac_author_read(tac_fd, &arep);

    if(arep.status != AUTHOR_STATUS_PASS_ADD &&
        arep.status != AUTHOR_STATUS_PASS_REPL) {

        _pam_log (LOG_ERR, "TACACS+ authorisation failed for [%s]", user);
        if(arep.msg != NULL)
            xfree (arep.msg);

        close(tac_fd);
        return PAM_PERM_DENIED;
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: user [%s] successfully authorized", __FUNCTION__, user);

    status = PAM_SUCCESS;

    attr = arep.attr;
    while (attr != NULL)  {
        char attribute[attr->attr_len];
        char value[attr->attr_len];
        char *sep;

        sep = index(attr->attr, '=');
        if(sep == NULL)
            sep = index(attr->attr, '*');
        if(sep != NULL) {
            bcopy(attr->attr, attribute, attr->attr_len-strlen(sep));
            attribute[attr->attr_len-strlen(sep)] = '\0';
            bcopy(sep, value, strlen(sep));
            value[strlen(sep)] = '\0';

            size_t i;
            for (i = 0; attribute[i] != '\0'; i++) {
                attribute[i] = toupper(attribute[i]);
                if (attribute[i] == '-')
                    attribute[i] = '_';
            }

            if (ctrl & PAM_TAC_DEBUG)
                syslog(LOG_DEBUG, "%s: returned attribute `%s%s' from server", __FUNCTION__, attribute, value);

            /* make returned attributes available for other PAM modules via PAM environment */
            if (pam_putenv(pamh, strncat(attribute, value, strlen(value))) != PAM_SUCCESS)
                syslog(LOG_WARNING, "%s: unable to set PAM environment", __FUNCTION__);

        } else {
            syslog(LOG_WARNING, "%s: invalid attribute `%s', no separator", __FUNCTION__, attr->attr);
        }
        attr = attr->next;
    }

    /* free returned attributes */
    if(arep.attr != NULL)
        tac_free_attrib(&arep.attr);

    if(arep.msg != NULL)
        xfree (arep.msg);

    close(tac_fd);

    return status;
}    /* pam_sm_acct_mgmt */
Ejemplo n.º 4
0
/* authorizes user on remote TACACS+ server, i.e. checks
 * his permission to access requested service
 * returns PAM_SUCCESS if the service is allowed
 */
PAM_EXTERN
int pam_sm_acct_mgmt (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl, status=PAM_AUTH_ERR;
    char *user;
    char *tty;
    char *r_addr;
    struct areply arep;
    struct tac_attrib *attr_s = NULL, *attr;
    int tac_fd = -1;

    user = tty = r_addr = NULL;
    memset(&arep, 0, sizeof(arep));

    /* this also obtains service name for authorization
       this should be normally performed by pam_get_item(PAM_SERVICE)
       but since PAM service names are incompatible TACACS+
       we have to pass it via command line argument until a better
       solution is found ;) */
    ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)",
            __func__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    _pam_get_user(pamh, &user);
    if (user == NULL)
        return PAM_USER_UNKNOWN;


    _pam_get_terminal(pamh, &tty);
    if(!strncmp(tty, "/dev/", 5))
        tty += 5;

    _pam_get_rhost(pamh, &r_addr);

    /* checks for specific data required by TACACS+, which should
       be supplied in pam module command line  */
    if(!*tac_service) {
        _pam_log (LOG_ERR, "TACACS+ service type not configured");
        return PAM_AUTH_ERR;
    }
    tac_add_attrib(&attr_s, "service", tac_service);

    if(tac_protocol != NULL && tac_protocol[0] != '\0')
          tac_add_attrib(&attr_s, "protocol", tac_protocol);
    else
          _pam_log (LOG_ERR, "TACACS+ protocol type not configured (IGNORED)");

    tac_add_attrib(&attr_s, "cmd", "");

    memset(&arep, 0, sizeof arep);

    /*
     * Check if user is authorized, independently of authentication.
     * Authentication may have happened via ssh public key, rather than
     * via TACACS+.  PAM should not normally get to this entry point if
     * user is not yet authenticated.
     * We only write the mapping entry (if needed) when authorization
     * is succesful.
     * attr is not used here, but having a non-NULL value is how
     * talk_tac_server() distinguishes that it is an acct call, vs auth
     * TODO: use a different mechanism
    */
    status = do_tac_connect(ctrl, &tac_fd, user, NULL, tty, r_addr, &attr_s,
        &arep, pamh);
    tac_free_attrib(&attr_s);
    if(active_server.addr == NULL || tac_fd < 0) {
        /* we need to return PAM_AUTHINFO_UNAVAIL here, rather than
         * PAM_AUTH_ERR, or we can't use "ignore" in the pam configuration
         */
        status = PAM_AUTHINFO_UNAVAIL;
        goto cleanup;
    }

    if(status) {
        if (ctrl & PAM_TAC_DEBUG)
            _pam_log(LOG_NOTICE, "No TACACS mapping for %s after auth failure",
                user);
        goto cleanup;
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: user [%s] successfully authorized", __func__,
            user);

    attr = arep.attr;
    while (attr != NULL)  {
        char attribute[attr->attr_len];
        char value[attr->attr_len];
        char attrenv[attr->attr_len];
        char *sep;

        sep = index(attr->attr, '=');
        if(sep == NULL)
            sep = index(attr->attr, '*');
        if(sep != NULL) {
            bcopy(attr->attr, attribute, attr->attr_len-strlen(sep));
            attribute[attr->attr_len-strlen(sep)] = '\0';
            bcopy(sep, value, strlen(sep));
            value[strlen(sep)] = '\0';

            size_t i;
            for (i = 0; attribute[i] != '\0'; i++) {
                attribute[i] = toupper(attribute[i]);
                if (attribute[i] == '-')
                    attribute[i] = '_';
            }

            if (ctrl & PAM_TAC_DEBUG)
                syslog(LOG_DEBUG, "%s: returned attribute `%s(%s)' from server",
                    __func__, attribute, value);

            if(strncmp(attribute, "PRIV", 4) == 0) {
                char *ok;

                /* because of the separation above, value will start with
                 * the separator, which we don't want.  */
                priv_level = (unsigned)strtoul(value+1, &ok, 0);
                /* if this fails, we leave priv_level at 0, which is
                 * least privileged, so that's OK, but at least report it
                 */
                if (ok == value)
                    _pam_log (LOG_WARNING,
                        "%s: non-numeric privilege for %s, got (%s)",
                        __func__, attribute, value+1);
            }

            /*
             * make returned attributes available for other PAM modules via PAM
             * environment. Since separator can be = or *, ensure it's = for
             * the env.
             */
            snprintf(attrenv, sizeof attribute, "%s=%s", attribute, value+1);
            if (pam_putenv(pamh, attrenv) != PAM_SUCCESS)
                _pam_log(LOG_WARNING, "%s: unable to set PAM environment (%s)",
                    __func__, attribute);

        } else {
            syslog(LOG_WARNING, "%s: invalid attribute `%s', no separator",
                __func__, attr->attr);
        }
        attr = attr->next;
    }

    update_mapped(pamh, user, priv_level, r_addr);


cleanup:
    /* free returned attributes */
    if(arep.attr != NULL)
        tac_free_attrib(&arep.attr);

    if(arep.msg != NULL)
        free (arep.msg);

    if(tac_fd >= 0) {
        active_server.addr = NULL;
        close(tac_fd);
        tac_fd = -1;
    }

    return status;
}    /* pam_sm_acct_mgmt */
Ejemplo n.º 5
0
/* Tested for servers that require password change during challenge/response */
PAM_EXTERN
int pam_sm_chauthtok(pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl;
    char *user;
    char *pass;
    char *tty;
    char *r_addr;
    const void *pam_pass = NULL;
    int srv_i;
    int status;

    user = pass = tty = r_addr = NULL;

    ctrl = _pam_parse(argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u) (flags=%d, argc=%d)",
            __func__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT, flags, argc);

    if (   (pam_get_item(pamh, PAM_OLDAUTHTOK, &pam_pass) == PAM_SUCCESS)
        && (pam_pass != NULL) ) {
         if ((pass = strdup(pam_pass)) == NULL)
              return PAM_BUF_ERR;
    } else {
        pass = strdup("");
    }

    _pam_get_user(pamh, &user);
    if (user == NULL) {
        if(pass) {
                free(pass);
        }
        return PAM_USER_UNKNOWN;
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: user [%s] obtained", __func__, user);

    _pam_get_terminal(pamh, &tty);
    if (tty && !strncmp(tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: tty [%s] obtained", __func__, tty?tty:"UNKNOWN");

    _pam_get_rhost(pamh, &r_addr);
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: rhost [%s] obtained", __func__, r_addr?r_addr:"UNKNOWN");

    if (PAM_SILENT != (flags & PAM_SILENT))
        status = do_tac_connect(ctrl, NULL, user, pass, tty, r_addr, NULL, NULL, pamh);
    else
        status = PAM_AUTHTOK_ERR;

    if (status != PAM_SUCCESS && status != PAM_AUTHTOK_ERR)
        _pam_log(LOG_ERR, "no more servers to connect");

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: exit with pam status: %d", __func__, status);

    if (NULL != pass) {
        bzero(pass, strlen(pass));
        free(pass);
        pass = NULL;
    }

    return status;

}    /* pam_sm_chauthtok */
Ejemplo n.º 6
0
/*
 * Send an accounting record to the TACACS+ server.
 * We send the start/stop accounting records even if the user is not known
 * to the TACACS+ server.   This seems non-intuitive, but it's the way
 * this code is written to work.
 */
int _pam_account(pam_handle_t *pamh, int argc, const char **argv,
    int type, char *cmd) {

    int retval;
    int ctrl;
    char *user = NULL;
    char *tty = NULL;
    char *r_addr = NULL;
    char *typemsg;
    int status = PAM_SESSION_ERR;
    int srv_i, tac_fd;

    typemsg = tac_acct_flag2str(type);
    ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: [%s] called (pam_tacplus v%u.%u.%u)",
            __func__, typemsg, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    _pam_get_user(pamh, &user);
    if (user == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: username [%s] obtained", __func__, user);

    if (!task_id)
#if defined(HAVE_OPENSSL_RAND_H) && defined(HAVE_LIBCRYPTO)
        RAND_pseudo_bytes((unsigned char *) &task_id, sizeof(task_id));
#else
        task_id = (short unsigned int) tac_magic();
#endif

    _pam_get_terminal(pamh, &tty);
    if(!strncmp(tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: tty [%s] obtained", __func__, tty);

    _pam_get_rhost(pamh, &r_addr);
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: rhost [%s] obtained", __func__, r_addr);

    /* checks for specific data required by TACACS+, which should
       be supplied in command line  */
    if(tac_protocol[0] == '\0') {
        _pam_log (LOG_ERR, "ACC: TACACS+ protocol type not configured");
        return PAM_AUTH_ERR;
    }

    /* when this module is called from within pppd or other
       application dealing with serial lines, it is likely
       that we will get hit with signal caused by modem hangup;
       this is important only for STOP packets, it's relatively
       rare that modem hangs up on accounting start */
    if(type == TAC_PLUS_ACCT_FLAG_STOP) {
        signal(SIGALRM, SIG_IGN);
        signal(SIGCHLD, SIG_IGN);
        signal(SIGHUP, SIG_IGN);
    }

    /*
     * If PAM_SESSION_ERR is used, then the pam config can't
     * ignore server failures, so use PAM_AUTHINFO_UNAVAIL.
     *
     * We have to make a new connection each time, because libtac is single
     * threaded (doesn't support multiple connects at the same time due to
     * use of globals)), and doesn't have support for persistent connections.
     * That's fixable, but not worth the effort at this point.
     *
     * TODO: this should be converted to use do_tac_connect eventually.
     */
    status = PAM_AUTHINFO_UNAVAIL;
    for(srv_i = 0; srv_i < tac_srv_no; srv_i++) {
        tac_fd = tac_connect_single(tac_srv[srv_i].addr, tac_srv[srv_i].key,
            NULL, __vrfname);
        if (tac_fd < 0) {
            _pam_log(LOG_WARNING, "%s: error sending %s (fd)", __func__,
                typemsg);
            continue;
        }
        if (ctrl & PAM_TAC_DEBUG)
            syslog(LOG_DEBUG, "%s: connected with fd=%d to srv[%d] %s", __func__,
                tac_fd, srv_i, tac_srv[srv_i].addr ?
                tac_ntop(tac_srv[srv_i].addr->ai_addr) : "not set");

        retval = _pam_send_account(tac_fd, type, user, tty, r_addr, cmd);
        if (retval < 0) {
            _pam_log(LOG_WARNING, "%s: error sending %s (acct)",
                __func__, typemsg);
        } else {
            status = PAM_SUCCESS;
            if (ctrl & PAM_TAC_DEBUG)
                syslog(LOG_DEBUG, "%s: [%s] for [%s] sent", __func__, typemsg, user);
        }

        if ((status == PAM_SUCCESS) && !(ctrl & PAM_TAC_ACCT)) {
            /* do not send acct start/stop packets to _all_ servers */
            break;
        }
    }

    if (type == TAC_PLUS_ACCT_FLAG_STOP) {
        signal(SIGALRM, SIG_DFL);
        signal(SIGCHLD, SIG_DFL);
        signal(SIGHUP, SIG_DFL);
    }
    return status;
}
Ejemplo n.º 7
0
/* authenticates user on remote TACACS+ server
 * returns PAM_SUCCESS if the supplied username and password
 * pair is valid
 */
PAM_EXTERN
int pam_sm_authenticate (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {
    int ctrl, retval;
    char *user, *puser;
    char *pass;
    char *tty;
    char *r_addr;
    int status;

    priv_level = 0;
    user = pass = tty = r_addr = NULL;

    ctrl = _pam_parse(argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)",
            __func__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    /* reset static state in case we are re-entered */
    _reset_saved_user(ctrl & PAM_TAC_DEBUG);

    /*
     * If a mapped user entry already exists, we are probably being
     * used for su or sudo, so we need to get the original user password,
     * rather than the mapped user.
     * Decided based on auid != uid and then do the lookup, similar to
     * find_pw_user() in nss_tacplusc
     */
    _pam_get_user(pamh, &puser);
    user = get_user_to_auth(puser);

    if (user == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: user [%s] obtained", __func__, user);

    retval = tacacs_get_password (pamh, flags, ctrl, &pass);
    if (retval != PAM_SUCCESS || pass == NULL || *pass == '\0') {
        _pam_log(LOG_ERR, "unable to obtain password");
        status = PAM_CRED_INSUFFICIENT;
        goto err;
    }

    retval = pam_set_item (pamh, PAM_AUTHTOK, pass);
    if (retval != PAM_SUCCESS) {
        _pam_log(LOG_ERR, "unable to set password");
        status = PAM_CRED_INSUFFICIENT;
        goto err;
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: password obtained", __func__);

    _pam_get_terminal(pamh, &tty);
    if (!strncmp(tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: tty [%s] obtained", __func__, tty);

    _pam_get_rhost(pamh, &r_addr);
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: rhost [%s] obtained", __func__, r_addr);

    status = do_tac_connect(ctrl, NULL, user, pass, tty, r_addr, NULL, NULL, pamh);

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: exit with pam status: %d", __func__, status);

err:
    if (user && user != puser)
        free(user); /* it was stdrup'ed */
    if (NULL != pass) {
        bzero(pass, strlen (pass));
        free(pass);
    }

    return status;
}    /* pam_sm_authenticate */
Ejemplo n.º 8
0
PAM_EXTERN 
int pam_sm_chauthtok (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl, retval;
    char *user;
    char *pass;
    char *tty;
    char *r_addr;
    int srv_i;
    int tac_fd;
    int status = PAM_TRY_AGAIN;
    int seq = 0;

    user = pass = tty = r_addr = NULL;

    ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)"
            , __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    /* Preliminary call to check readiness of our module */
    if (flags & PAM_PRELIM_CHECK) {
    	/* Can we connect to TACACS? */
    	for (srv_i = 0; srv_i < tac_srv_no; srv_i++) {
    		if (ctrl & PAM_TAC_DEBUG)
    			_pam_log (LOG_DEBUG, "%s: trying srv %d", __FUNCTION__, srv_i );
    		tac_fd = tac_connect_single(tac_srv[srv_i], tac_srv_key[srv_i]);
			if (tac_fd < 0) {
				_pam_log (LOG_ERR, "connection failed srv %d: %m", srv_i);
				if (srv_i == tac_srv_no-1) {
					_pam_log (LOG_ERR, "no more servers to connect");
					return PAM_TRY_AGAIN;
				}
				continue;
			}
    	}
    	close(tac_fd);
    	return PAM_SUCCESS;
    }

    if ((user = _pam_get_user(pamh)) == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: user [%s] obtained", __FUNCTION__, user);

    /* CHPASS does not send a password in data field,
     * user is prompted by a GETDATA reply packet
     */
    pass = malloc(5);
    strcpy(pass,"null");

    tty = _pam_get_terminal(pamh);
    if (!strncmp (tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: tty [%s] obtained", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: rhost [%s] obtained", __FUNCTION__, r_addr);

    /* Attempt server connect */
    for (srv_i = 0; srv_i < tac_srv_no; srv_i++) {
        status = TAC_PLUS_AUTHEN_STATUS_FAIL;
        if (ctrl & PAM_TAC_DEBUG)
            _pam_log (LOG_DEBUG, "%s: trying srv %d", __FUNCTION__, srv_i );

        tac_fd = tac_connect_single(tac_srv[srv_i], tac_srv_key[srv_i]);
        if (tac_fd < 0) {
            _pam_log (LOG_ERR, "connection failed srv %d: %m", srv_i);
            if (srv_i == tac_srv_no-1) {
                _pam_log (LOG_ERR, "no more servers to connect");
                return PAM_AUTHINFO_UNAVAIL;
            }
            continue;
        }

        /* Send AUTHEN/START */
        if (tac_authen_send(tac_fd, user, pass, tty, r_addr, TAC_PLUS_AUTHEN_CHPASS, ctrl) < 0) {
            _pam_log (LOG_ERR, "error sending auth req to TACACS+ server");
            status = PAM_AUTHINFO_UNAVAIL;
        } else {
        	/* Read AUTHEN/REPLY and act on status */
			struct msg_status *msgstatus = malloc(sizeof(msg_status));

			do
			{
				tac_authen_read(msgstatus, tac_fd, ctrl, &seq);
				status = msgstatus->status;

				switch (status) {
					case TAC_PLUS_AUTHEN_STATUS_GETPASS:
						/* AUTHEN/CONT with password */
						if (ctrl & PAM_TAC_DEBUG)
							_pam_log (LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);

						if (tac_cont_send(tac_fd, pass, ctrl, seq+1) < 0) {
							_pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
							status = PAM_AUTHINFO_UNAVAIL;
						}
					break;

					case TAC_PLUS_AUTHEN_STATUS_GETDATA: {
						/* Get data from user with pam conversation */
						struct pam_message msg;
						struct pam_response *resp = NULL;
						int retval;
						char *user_data = NULL;

						/* set up conversation call */
						msg.msg_style = PAM_PROMPT_ECHO_OFF;
						msg.msg = malloc(100);
						strcpy((char *)msg.msg,msgstatus->server_msg);

						if ((retval = converse (pamh, 1, &msg, &resp)) != PAM_SUCCESS) {
							status = PAM_AUTHINFO_UNAVAIL;
						} else {
							if (resp != NULL) {
								if (resp->resp == NULL && (ctrl & PAM_TAC_DEBUG))
									_pam_log (LOG_DEBUG, "pam_sm_authenticate: NULL given by user for GETDATA request");

								user_data = resp->resp;
								resp->resp = NULL;
							} else {
								if (ctrl & PAM_TAC_DEBUG) {
									_pam_log (LOG_DEBUG, "pam_sm_authenticate: no error reported");
									_pam_log (LOG_DEBUG, "getting data from user - NULL returned!?");
								}
								return PAM_CONV_ERR;
							}

							/* AUTHEN/CONT with data */
							if (ctrl & PAM_TAC_DEBUG)
								_pam_log (LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);

							if (tac_cont_send(tac_fd, user_data, ctrl, seq+1) < 0) {
								_pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
								status = PAM_AUTHINFO_UNAVAIL;
							}
						}
						free(msg.msg);
					}
					break;

					case TAC_PLUS_AUTHEN_STATUS_GETUSER:
						/* AUTHEN/CONT with username */
						if (ctrl & PAM_TAC_DEBUG)
							_pam_log (LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);

						if (tac_cont_send(tac_fd, user, ctrl, seq+1) < 0) {
							_pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
							status = PAM_AUTHINFO_UNAVAIL;
						}
					break;
				}
			} while ( 	(status == TAC_PLUS_AUTHEN_STATUS_GETDATA) ||
						(status == TAC_PLUS_AUTHEN_STATUS_GETPASS) ||
						(status == TAC_PLUS_AUTHEN_STATUS_GETUSER)		);

            if (status != TAC_PLUS_AUTHEN_STATUS_PASS) {
                _pam_log (LOG_ERR, "auth failed: %d", status);
                status = PAM_AUTHTOK_ERR;
            } else {
                /* OK, we got authenticated; save the server that
                   accepted us for pam_sm_acct_mgmt and exit the loop */
                status = PAM_SUCCESS;
                active_server = tac_srv[srv_i];
                active_key = tac_srv_key[srv_i];
                close(tac_fd);
                break;
            }
        }
        close(tac_fd);
    }

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: exit with pam status: %i", __FUNCTION__, status);

    bzero (pass, strlen (pass));
    free(pass);
    pass = NULL;

    return status;
}    /* pam_sm_chauthtok */
Ejemplo n.º 9
0
/* authorizes user on remote TACACS+ server, i.e. checks
 * his permission to access requested service
 * returns PAM_SUCCESS if the service is allowed
 */
PAM_EXTERN 
int pam_sm_acct_mgmt (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int retval, ctrl, status=PAM_AUTH_ERR;
    char *user;
    char *tty;
    char *r_addr;
    struct areply arep;
    struct tac_attrib *attr = NULL;
    int tac_fd;

    user = tty = r_addr = NULL;
  
    /* this also obtains service name for authorization
       this should be normally performed by pam_get_item(PAM_SERVICE)
       but since PAM service names are incompatible TACACS+
       we have to pass it via command line argument until a better
       solution is found ;) */
    ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)"
            , __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);
  
    if ((user = _pam_get_user(pamh)) == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log(LOG_DEBUG, "%s: username obtained [%s]", __FUNCTION__, user);
  
    tty = _pam_get_terminal(pamh);
    if(!strncmp(tty, "/dev/", 5)) 
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        _pam_log(LOG_DEBUG, "%s: tty obtained [%s]", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        _pam_log(LOG_DEBUG, "%s: rhost obtained [%s]", __FUNCTION__, r_addr);
  
    /* checks if user has been successfully authenticated
       by TACACS+; we cannot solely authorize user if it hasn't
       been authenticated or has been authenticated by method other
       than TACACS+ */
    if(!active_server) {
        _pam_log (LOG_ERR, "user not authenticated by TACACS+");
        return PAM_AUTH_ERR;
    }
    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: active server is [%s]", __FUNCTION__,
            tac_ntop(active_server->ai_addr, active_server->ai_addrlen));

    /* checks for specific data required by TACACS+, which should
       be supplied in command line  */
    if(tac_service == NULL || *tac_service == '\0') {
        _pam_log (LOG_ERR, "TACACS+ service type not configured");
        return PAM_AUTH_ERR;
    }
    if(tac_protocol == NULL || *tac_protocol == '\0') {
        _pam_log (LOG_ERR, "TACACS+ protocol type not configured");
        return PAM_AUTH_ERR;
    }

    tac_add_attrib(&attr, "service", tac_service);
    tac_add_attrib(&attr, "protocol", tac_protocol);

    tac_fd = tac_connect_single(active_server, active_key);
    if(tac_fd < 0) {
        _pam_log (LOG_ERR, "TACACS+ server unavailable");
        if(arep.msg != NULL) free (arep.msg);
        close(tac_fd);
        return PAM_AUTH_ERR;
    }

    retval = tac_author_send(tac_fd, user, tty, r_addr, attr);

    tac_free_attrib(&attr);
  
    if(retval < 0) {
        _pam_log (LOG_ERR, "error getting authorization");
        if(arep.msg != NULL) free (arep.msg);
        close(tac_fd);
        return PAM_AUTH_ERR;
    }

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log(LOG_DEBUG, "%s: sent authorization request", __FUNCTION__);
  
    tac_author_read(tac_fd, &arep);

    if(arep.status != AUTHOR_STATUS_PASS_ADD &&
        arep.status != AUTHOR_STATUS_PASS_REPL) {

        _pam_log (LOG_ERR, "TACACS+ authorisation failed for [%s]", user);
        if(arep.msg != NULL) free (arep.msg);
        close(tac_fd);
        return PAM_PERM_DENIED;
    }

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log(LOG_DEBUG, "%s: user [%s] successfully authorized", __FUNCTION__, user);
  
    status = PAM_SUCCESS;
  
    attr = arep.attr;
    while (attr != NULL)  {
        char attribute[attr->attr_len];
        char value[attr->attr_len];
        char *sep;

        sep = index(attr->attr, '=');
        if(sep == NULL)
            sep = index(attr->attr, '*');
        if(sep != NULL) {
            bcopy(attr->attr, attribute, attr->attr_len-strlen(sep));
            attribute[attr->attr_len-strlen(sep)] = '\0';
            bcopy(sep, value, strlen(sep));
            value[strlen(sep)] = '\0';

            size_t i;
            for (i = 0; attribute[i] != '\0'; i++) {
                attribute[i] = toupper(attribute[i]);
                if (attribute[i] == '-')
                    attribute[i] = '_';
            }

            if (ctrl & PAM_TAC_DEBUG)
                _pam_log(LOG_DEBUG, "%s: returned attribute `%s%s' from server", __FUNCTION__, attribute, value);

            /* make returned attributes available for other PAM modules via PAM environment */
            if (pam_putenv(pamh, strncat(attribute, value, strlen(value))) != PAM_SUCCESS)
                _pam_log(LOG_WARNING, "%s: unable to set PAM environment", __FUNCTION__);

        } else {
            _pam_log(LOG_WARNING, "%s: invalid attribute `%s', no separator", __FUNCTION__, attr->attr);
        }
        attr = attr->next;
    }

    /* free returned attributes */
    if(arep.attr != NULL) tac_free_attrib(&arep.attr);
    if(arep.msg != NULL) free (arep.msg);
    close(tac_fd);

    return status;
}    /* pam_sm_acct_mgmt */
Ejemplo n.º 10
0
/* authenticates user on remote TACACS+ server
 * returns PAM_SUCCESS if the supplied username and password
 * pair is valid 
 */
PAM_EXTERN 
int pam_sm_authenticate (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl, retval;
    char *user;
    char *pass;
    char *tty;
    char *r_addr;
    int srv_i;
    int tac_fd;
    int status = PAM_AUTH_ERR;
    int seq = 0;

    user = pass = tty = r_addr = NULL;

    ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)"
            , __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    if ((user = _pam_get_user(pamh)) == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: user [%s] obtained", __FUNCTION__, user);
  
    /* uwzgledniac PAM_DISALLOW_NULL_AUTHTOK */

    retval = tacacs_get_password (pamh, flags, ctrl, &pass);

    if (retval != PAM_SUCCESS || pass == NULL || *pass == '\0') {
        _pam_log (LOG_ERR, "unable to obtain password");
        return PAM_CRED_INSUFFICIENT;
    }

    retval = pam_set_item (pamh, PAM_AUTHTOK, pass);
    if (retval != PAM_SUCCESS) {
        _pam_log (LOG_ERR, "unable to set password");
        return PAM_CRED_INSUFFICIENT;
    }

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: password obtained", __FUNCTION__);

    tty = _pam_get_terminal(pamh);
    if (!strncmp (tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: tty [%s] obtained", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: rhost [%s] obtained", __FUNCTION__, r_addr);

    /* Attempt server connect */
    for (srv_i = 0; srv_i < tac_srv_no; srv_i++) {
        status = TAC_PLUS_AUTHEN_STATUS_FAIL;
        if (ctrl & PAM_TAC_DEBUG)
            _pam_log (LOG_DEBUG, "%s: trying srv %d", __FUNCTION__, srv_i );

        tac_fd = tac_connect_single(tac_srv[srv_i], tac_srv_key[srv_i]);
        if (tac_fd < 0) {
            _pam_log (LOG_ERR, "connection failed srv %d: %m", srv_i);
            if (srv_i == tac_srv_no-1) {
                _pam_log (LOG_ERR, "no more servers to connect");
                return PAM_AUTHINFO_UNAVAIL;
            }
            continue;
        }

        /* Send AUTHEN/START */
        if (tac_authen_send(tac_fd, user, pass, tty, r_addr, TAC_PLUS_AUTHEN_LOGIN, ctrl) < 0) {
            _pam_log (LOG_ERR, "error sending auth req to TACACS+ server");
            status = PAM_AUTHINFO_UNAVAIL;
        } else {
        	/* Read AUTHEN/REPLY and act on status */
        	struct msg_status *msgstatus = malloc(sizeof(msg_status));

            do
			{
            	tac_authen_read(msgstatus, tac_fd, ctrl, &seq);
        		status = msgstatus->status;

            	switch (status) {
            		case TAC_PLUS_AUTHEN_STATUS_GETPASS:
            			/* AUTHEN/CONT with password */
						if (ctrl & PAM_TAC_DEBUG)
							_pam_log (LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);

						if (tac_cont_send(tac_fd, pass, ctrl, seq+1) < 0) {
							_pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
							status = PAM_MAXTRIES;
						}
            		break;

            		case TAC_PLUS_AUTHEN_STATUS_GETDATA: {
            			/* The only GETDATA request should be if the user's password
            			 * has expired and ACS is requesting a new password
            			 *
            			 * Check if a conversation function has been set and either
            			 * return a PAM_AUTHTOK_EXPIRED or start a conversation
            			 * with the user for to change the password
            			 */
            			if (!strcmp(tty,"http")) {
            				status = PAM_NEW_AUTHTOK_REQD;
            				if (ctrl & PAM_TAC_DEBUG)
            					_pam_log (LOG_DEBUG, "%s: expired", __FUNCTION__);
            			} else {

							/* Get data from user with pam conversation */
							struct pam_message msg;
							struct pam_response *resp = NULL;
							int retval;
							char *user_data = NULL;

							/* set up conversation call */
							msg.msg_style = PAM_PROMPT_ECHO_OFF;
							msg.msg = malloc(100);
							strcpy((char *)msg.msg,msgstatus->server_msg);

							if ((retval = converse (pamh, 1, &msg, &resp)) != PAM_SUCCESS) {
								status = PAM_AUTHINFO_UNAVAIL;
							} else {
								if (resp != NULL) {
									if (resp->resp == NULL && (ctrl & PAM_TAC_DEBUG))
										_pam_log (LOG_DEBUG, "pam_sm_authenticate: NULL given by user for GETDATA request");

									user_data = resp->resp;
									resp->resp = NULL;
								} else {
									if (ctrl & PAM_TAC_DEBUG) {
										_pam_log (LOG_DEBUG, "pam_sm_authenticate: no error reported");
										_pam_log (LOG_DEBUG, "getting data from user - NULL returned!?");
									}
									return PAM_CONV_ERR;
								}

								/* AUTHEN/CONT with data */
								if (ctrl & PAM_TAC_DEBUG)
									_pam_log (LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);

								if (tac_cont_send(tac_fd, user_data, ctrl, seq+1) < 0) {
									_pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
									status = PAM_AUTHINFO_UNAVAIL;
								}
							}
							free(msg.msg);
            			}
            		}
            		break;

            		case TAC_PLUS_AUTHEN_STATUS_GETUSER:
            			/* AUTHEN/CONT with username */
            			if (ctrl & PAM_TAC_DEBUG)
							_pam_log (LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);

						if (tac_cont_send(tac_fd, user, ctrl, seq+1) < 0) {
							_pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
							status = PAM_AUTHINFO_UNAVAIL;
						}
            		break;
            	}
            } while ( 	(status == TAC_PLUS_AUTHEN_STATUS_GETDATA) ||
            			(status == TAC_PLUS_AUTHEN_STATUS_GETPASS) ||
            			(status == TAC_PLUS_AUTHEN_STATUS_GETUSER)		);

            if (ctrl & PAM_TAC_DEBUG)
            	_pam_log (LOG_DEBUG, "%s: out of while loop status=%d", __FUNCTION__,status);

            if (status == TAC_PLUS_AUTHEN_STATUS_PASS) {
            	/* OK, we got authenticated; save the server that
				   accepted us for pam_sm_acct_mgmt and exit the loop */
				status = PAM_SUCCESS;
				active_server = tac_srv[srv_i];
				active_key = tac_srv_key[srv_i];
            } else if (status != PAM_NEW_AUTHTOK_REQD) {
                _pam_log (LOG_ERR, "auth failed: %d", status);
                status = PAM_AUTH_ERR;
            }
        }
        close(tac_fd);

        /* TODO: Allow time for tac server to reply
         * TODO: Check if reply received before connecting to next server
         */
    }

    if (ctrl & PAM_TAC_DEBUG)
        _pam_log (LOG_DEBUG, "%s: exit with pam status: %i", __FUNCTION__, status);

    bzero (pass, strlen (pass));
    free(pass);
    pass = NULL;

    return status;
}    /* pam_sm_authenticate */
Ejemplo n.º 11
0
/* authenticates user on remote TACACS+ server
 * returns PAM_SUCCESS if the supplied username and password
 * pair is valid
 */
PAM_EXTERN
int pam_sm_authenticate (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl, retval;
    char *user;
    char *pass;
    char *tty;
    char *r_addr;
    int srv_i;
    int tac_fd, status, msg, communicating;

    user = pass = tty = r_addr = NULL;

    ctrl = _pam_parse(argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)",
            __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    if ((user = _pam_get_user(pamh)) == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: user [%s] obtained", __FUNCTION__, user);

    /* uwzgledniac PAM_DISALLOW_NULL_AUTHTOK */

    retval = tacacs_get_password (pamh, flags, ctrl, &pass);
    if (retval != PAM_SUCCESS || pass == NULL || *pass == '\0') {
        _pam_log(LOG_ERR, "unable to obtain password");
        return PAM_CRED_INSUFFICIENT;
    }

    retval = pam_set_item (pamh, PAM_AUTHTOK, pass);
    if (retval != PAM_SUCCESS) {
        _pam_log(LOG_ERR, "unable to set password");
        return PAM_CRED_INSUFFICIENT;
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: password obtained", __FUNCTION__);

    tty = _pam_get_terminal(pamh);
    if (!strncmp(tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: tty [%s] obtained", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: rhost [%s] obtained", __FUNCTION__, r_addr);

    status = PAM_AUTHINFO_UNAVAIL;
    for (srv_i = 0; srv_i < tac_srv_no; srv_i++) {
        if (ctrl & PAM_TAC_DEBUG)
            syslog(LOG_DEBUG, "%s: trying srv %d", __FUNCTION__, srv_i );

        tac_fd = tac_connect_single(tac_srv[srv_i].addr, tac_srv[srv_i].key);
        if (tac_fd < 0) {
            _pam_log(LOG_ERR, "connection failed srv %d: %m", srv_i);
            continue;
        }
        if (tac_authen_send(tac_fd, user, pass, tty, r_addr) < 0) {
            close(tac_fd);
            _pam_log(LOG_ERR, "error sending auth req to TACACS+ server");
            continue;
        }
        communicating = 1;
        while (communicating) {
            msg = tac_authen_read(tac_fd);

            /* talk the protocol */
            switch (msg) {
                case TAC_PLUS_AUTHEN_STATUS_PASS:
                    /* success */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_PASS");

                    status = PAM_SUCCESS;
                    communicating = 0;
                    active_server.addr = tac_srv[srv_i].addr;
                    active_server.key = tac_srv[srv_i].key;

                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "%s: active srv %d", __FUNCTION__, srv_i);
                    break;

                case TAC_PLUS_AUTHEN_STATUS_FAIL:
                    /* forget it */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_FAIL");

                    status = PAM_AUTH_ERR;
                    communicating = 0;
                    _pam_log(LOG_ERR, "auth failed: %d", msg);
                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETDATA:
                    /* not implemented */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETDATA");

                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETUSER:
                    /* not implemented */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETUSER");

                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_GETPASS:
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_GETPASS");

                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);

                    if (tac_cont_send(tac_fd, pass) < 0) {
                        _pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
                        communicating = 0;
                        break;
                    }
                    /* continue the while loop; go read tac response */
                    break;

                case TAC_PLUS_AUTHEN_STATUS_RESTART:
                    /* try it again */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_RESTART");

                    /*
                     * not implemented
                     * WdJ: I *think* you can just do tac_authen_send(user, pass) again
                     *      but I'm not sure
                     */
                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_ERROR:
                    /* server has problems */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_ERROR");

                    communicating = 0;
                    break;

                case TAC_PLUS_AUTHEN_STATUS_FOLLOW:
                    /* server tells to try a different server address */
                    /* not implemented */
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: TAC_PLUS_AUTHEN_STATUS_FOLLOW");

                    communicating = 0;
                    break;

                default:
                    if (msg < 0) {
                        /* connection error */
                        communicating = 0;
                        if (ctrl & PAM_TAC_DEBUG)
                            syslog(LOG_DEBUG, "error communicating with tacacs server");
                        break;
                    }

                    /* unknown response code */
                    communicating = 0;
                    if (ctrl & PAM_TAC_DEBUG)
                        syslog(LOG_DEBUG, "tacacs status: unknown response 0x%02x", msg);
            }
        }    /* end while(communicating) */
        close(tac_fd);

        if (status == PAM_SUCCESS || status == PAM_AUTH_ERR)
            break;
    }
    if (status != PAM_SUCCESS && status != PAM_AUTH_ERR)
        _pam_log(LOG_ERR, "no more servers to connect");

    if (ctrl & PAM_TAC_DEBUG)
        syslog(LOG_DEBUG, "%s: exit with pam status: %d", __FUNCTION__, status);

    bzero(pass, strlen (pass));
    free(pass);
    pass = NULL;

    return status;
}    /* pam_sm_authenticate */
Ejemplo n.º 12
0
/* authenticates user on remote TACACS+ server
 * returns PAM_SUCCESS if the supplied username and password
 * pair is valid 
 */
PAM_EXTERN 
int pam_sm_authenticate (pam_handle_t * pamh, int flags,
    int argc, const char **argv) {

    int ctrl, retval;
    char *user;
    char *pass;
    char *tty;
    char *r_addr;
    int srv_i;
    int tac_fd;
    int status = PAM_AUTH_ERR;

    user = pass = tty = r_addr = NULL;

    ctrl = _pam_parse (argc, argv);

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: called (pam_tacplus v%u.%u.%u)"
            , __FUNCTION__, PAM_TAC_VMAJ, PAM_TAC_VMIN, PAM_TAC_VPAT);

    if ((user = _pam_get_user(pamh)) == NULL)
        return PAM_USER_UNKNOWN;

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: user [%s] obtained", __FUNCTION__, user);
  
    /* uwzgledniac PAM_DISALLOW_NULL_AUTHTOK */

    retval = tacacs_get_password (pamh, flags, ctrl, &pass);
    if (retval != PAM_SUCCESS || pass == NULL || *pass == '\0') {
        _pam_log (LOG_ERR, "unable to obtain password");
        return PAM_CRED_INSUFFICIENT;
    }

    retval = pam_set_item (pamh, PAM_AUTHTOK, pass);
    if (retval != PAM_SUCCESS) {
        _pam_log (LOG_ERR, "unable to set password");
        return PAM_CRED_INSUFFICIENT;
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: password obtained", __FUNCTION__);

    tty = _pam_get_terminal(pamh);
    if (!strncmp (tty, "/dev/", 5))
        tty += 5;
    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: tty [%s] obtained", __FUNCTION__, tty);

    r_addr = _pam_get_rhost(pamh);
    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: rhost [%s] obtained", __FUNCTION__, r_addr);

    for (srv_i = 0; srv_i < tac_srv_no; srv_i++) {
        int msg = TAC_PLUS_AUTHEN_STATUS_FAIL;
        if (ctrl & PAM_TAC_DEBUG)
            syslog (LOG_DEBUG, "%s: trying srv %d", __FUNCTION__, srv_i );

        tac_fd = tac_connect_single(tac_srv[srv_i], tac_srv_key[srv_i]);
        if (tac_fd < 0) {
            _pam_log (LOG_ERR, "connection failed srv %d: %m", srv_i);
            if (srv_i == tac_srv_no-1) {
                _pam_log (LOG_ERR, "no more servers to connect");
                return PAM_AUTHINFO_UNAVAIL;
            }
            continue;
        }

        if (tac_authen_send(tac_fd, user, pass, tty, r_addr) < 0) {
            _pam_log (LOG_ERR, "error sending auth req to TACACS+ server");
            status = PAM_AUTHINFO_UNAVAIL;
        } else {
            msg = tac_authen_read(tac_fd);
            if (msg == TAC_PLUS_AUTHEN_STATUS_GETPASS) {
                if (ctrl & PAM_TAC_DEBUG)
                    syslog (LOG_DEBUG, "%s: tac_cont_send called", __FUNCTION__);
                if (tac_cont_send(tac_fd, pass) < 0) {
                    _pam_log (LOG_ERR, "error sending continue req to TACACS+ server");
                    status = PAM_AUTHINFO_UNAVAIL;
                } else {
                    msg = tac_authen_read(tac_fd);
                    if (msg != TAC_PLUS_AUTHEN_STATUS_PASS) {
                        _pam_log (LOG_ERR, "auth failed: %d", msg);
                        status = PAM_AUTH_ERR;
                    } else {
                        /* OK, we got authenticated; save the server that
                           accepted us for pam_sm_acct_mgmt and exit the loop */
                        status = PAM_SUCCESS;
                        active_server = tac_srv[srv_i];
                        active_key = tac_srv_key[srv_i];
                        close(tac_fd);
                        break;
                    }
                }
            } else if (msg != TAC_PLUS_AUTHEN_STATUS_PASS) {
                _pam_log (LOG_ERR, "auth failed: %d", msg);
                status = PAM_AUTH_ERR;
            } else {
                /* OK, we got authenticated; save the server that
                   accepted us for pam_sm_acct_mgmt and exit the loop */
                status = PAM_SUCCESS;
                active_server = tac_srv[srv_i];
                active_key = tac_srv_key[srv_i];
                close(tac_fd);
                break;
            }
        }
        close(tac_fd);
    }

    if (ctrl & PAM_TAC_DEBUG)
        syslog (LOG_DEBUG, "%s: exit with pam status: %i", __FUNCTION__, status);

    bzero (pass, strlen (pass));
    free(pass);
    pass = NULL;

    return status;
}    /* pam_sm_authenticate */