static void acpi_jump_to_wakeup(void *vector)
{
uintptr_t source = 0, target = 0;
size_t size = 0;
if (!acpi_s3_resume_allowed()) {
printk(BIOS_WARNING, "ACPI: S3 resume not allowed.\n");
return;
}
if (!CONFIG(RELOCATABLE_RAMSTAGE)) {
struct resume_backup *backup_mem = cbmem_find(CBMEM_ID_RESUME);
if (backup_mem && backup_mem->valid) {
backup_mem->valid = 0;
target = backup_mem->lowmem;
source = backup_mem->cbmem;
size = backup_mem->size;
} else {
printk(BIOS_WARNING, "ACPI: Backup memory missing. "
"No S3 resume.\n");
return;
}
}
/* Copy wakeup trampoline in place. */
memcpy((void *)WAKEUP_BASE, &__wakeup, __wakeup_size);
set_boot_successful();
timestamp_add_now(TS_ACPI_WAKE_JUMP);
acpi_do_wakeup((uintptr_t)vector, source, target, size);
}
void acpi_jump_to_wakeup(void *vector)
{
u32 acpi_backup_memory = 0;
if (HIGH_MEMORY_SAVE && acpi_s3_resume_allowed()) {
acpi_backup_memory = (u32)cbmem_find(CBMEM_ID_RESUME);
if (!acpi_backup_memory) {
printk(BIOS_WARNING, "ACPI: Backup memory missing. "
"No S3 resume.\n");
return;
}
}
#if CONFIG_SMP
// FIXME: This should go into the ACPI backup memory, too. No pork sausages.
/*
* Just restore the SMP trampoline and continue with wakeup on
* assembly level.
*/
memcpy(lowmem_backup_ptr, lowmem_backup, lowmem_backup_size);
#endif
/* Copy wakeup trampoline in place. */
memcpy((void *)WAKEUP_BASE, &__wakeup, __wakeup_size);
#if CONFIG_COLLECT_TIMESTAMPS
timestamp_add_now(TS_ACPI_WAKE_JUMP);
#endif
acpi_do_wakeup((u32)vector, acpi_backup_memory, CONFIG_RAMBASE,
HIGH_MEMORY_SAVE);
}
/* Let's prepare the ACPI S3 Resume area now already, so we can rely on
* it being there during reboot time. If this fails, ACPI resume will
* be disabled. We assume that ramstage does not change while in suspend,
* so base and size of the currently running ramstage are used
* for allocation.
*/
void acpi_prepare_resume_backup(void)
{
if (!acpi_s3_resume_allowed())
return;
if (CONFIG(RELOCATABLE_RAMSTAGE))
return;
backup_create_or_update(NULL, (uintptr_t)_program,
REGION_SIZE(program));
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
u32 val;
AGESAWRAPPER(amdinitmmio);
hudson_lpc_port80();
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
post_code(0x31);
console_init();
}
/* Halt if there was a built in self test failure */
post_code(0x34);
report_bist_failure(bist);
/* Load MPB */
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
post_code(0x37);
AGESAWRAPPER(amdinitreset);
post_code(0x39);
AGESAWRAPPER(amdinitearly);
int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed();
if (!s3resume) {
post_code(0x40);
AGESAWRAPPER(amdinitpost);
post_code(0x41);
AGESAWRAPPER(amdinitenv);
disable_cache_as_ram();
} else { /* S3 detect */
printk(BIOS_INFO, "S3 detected\n");
post_code(0x60);
AGESAWRAPPER(amdinitresume);
AGESAWRAPPER(amds3laterestore);
post_code(0x61);
prepare_for_resume();
}
post_code(0x50);
copy_and_run();
post_code(0x54); /* Should never see this post code. */
}
void acpi_prepare_resume_backup(void)
{
if (!acpi_s3_resume_allowed())
return;
/* Let's prepare the ACPI S3 Resume area now already, so we can rely on
* it being there during reboot time. We don't need the pointer, nor
* the result right now. If it fails, ACPI resume will be disabled.
*/
if (HIGH_MEMORY_SAVE)
cbmem_add(CBMEM_ID_RESUME, HIGH_MEMORY_SAVE);
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
u32 val;
u8 byte;
device_t dev;
AGESAWRAPPER(amdinitmmio);
hudson_lpc_port80();
//__asm__ volatile ("1: jmp 1b");
/* TODO: */
dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
byte = pci_read_config8(dev, 0x48);
byte |= 3; /* 2e, 2f */
pci_write_config8(dev, 0x48, byte);
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
post_code(0x31);
lpc47n217_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
outb(0x24, 0xcd6);
outb(0x1, 0xcd7);
outb(0xea, 0xcd6);
outb(0x1, 0xcd7);
*(u8 *)0xfed80101 = 0x98;
console_init();
}
/* Halt if there was a built in self test failure */
post_code(0x34);
report_bist_failure(bist);
/* Load MPB */
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
post_code(0x37);
AGESAWRAPPER(amdinitreset);
post_code(0x39);
AGESAWRAPPER(amdinitearly);
int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed();
if (!s3resume) {
post_code(0x40);
AGESAWRAPPER(amdinitpost);
post_code(0x41);
AGESAWRAPPER(amdinitenv);
disable_cache_as_ram();
} else { /* S3 detect */
printk(BIOS_INFO, "S3 detected\n");
post_code(0x60);
AGESAWRAPPER(amdinitresume);
AGESAWRAPPER(amds3laterestore);
post_code(0x61);
prepare_for_resume();
}
post_code(0x50);
copy_and_run();
post_code(0x54); /* Should never see this post code. */
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
u32 val;
u8 byte;
device_t dev;
#if IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE)
hudson_pci_port80();
#endif
#if IS_ENABLED(CONFIG_POST_DEVICE_LPC)
hudson_lpc_port80();
#endif
val = agesawrapper_amdinitmmio();
if (!cpu_init_detectedx && boot_cpu()) {
/* enable SIO LPC decode */
dev = PCI_DEV(0, 0x14, 3);
byte = pci_read_config8(dev, 0x48);
byte |= 3; /* 2e, 2f */
pci_write_config8(dev, 0x48, byte);
/* enable serial decode */
byte = pci_read_config8(dev, 0x44);
byte |= (1 << 6); /* 0x3f8 */
pci_write_config8(dev, 0x44, byte);
post_code(0x30);
/* enable SB MMIO space */
outb(0x24, 0xcd6);
outb(0x1, 0xcd7);
/* enable SIO clock */
sbxxx_enable_48mhzout();
ite_kill_watchdog(GPIO_DEV);
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
ite_enable_3vsbsw(GPIO_DEV);
console_init();
/* turn on secondary smbus at b20 */
outb(0x28, 0xcd6);
byte = inb(0xcd7);
byte |= 1;
outb(byte, 0xcd7);
/* set DDR3 voltage */
byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL;
/* default is byte = 0x0, so no need to set it in this case */
if (byte)
do_smbus_write_byte(0xb20, 0x15, 0x3, byte);
}
/* Halt if there was a built in self test failure */
post_code(0x34);
report_bist_failure(bist);
/* Load MPB */
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
post_code(0x37);
printk(BIOS_DEBUG, "agesawrapper_amdinitreset ");
val = agesawrapper_amdinitreset();
if(val) {
printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
}
post_code(0x39);
val = agesawrapper_amdinitearly ();
if(val) {
printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
}
printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n");
int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed();
if (!s3resume) {
post_code(0x40);
val = agesawrapper_amdinitpost ();
if(val) {
printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
}
printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n");
post_code(0x41);
val = agesawrapper_amdinitenv ();
if(val) {
printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
}
printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n");
disable_cache_as_ram();
} else { /* S3 detect */
printk(BIOS_INFO, "S3 detected\n");
post_code(0x60);
printk(BIOS_DEBUG, "agesawrapper_amdinitresume ");
val = agesawrapper_amdinitresume();
if (val)
printk(BIOS_DEBUG, "error level: %x \n", val);
else
printk(BIOS_DEBUG, "passed.\n");
printk(BIOS_DEBUG, "agesawrapper_amds3laterestore ");
val = agesawrapper_amds3laterestore ();
if (val)
printk(BIOS_DEBUG, "error level: %x \n", val);
else
printk(BIOS_DEBUG, "passed.\n");
post_code(0x61);
prepare_for_resume();
}
post_code(0x50);
copy_and_run();
post_code(0x54); /* Should never see this post code. */
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
u32 val;
/* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
* LpcClk[1:0]". To be consistent with Parmer, setting to 4mA
* even though the register is not documented in the Kabini BKDG.
* Otherwise the serial output is bad code.
*/
outb(0xD2, 0xcd6);
outb(0x00, 0xcd7);
AGESAWRAPPER(amdinitmmio);
hudson_lpc_port80();
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
post_code(0x31);
console_init();
}
/* Halt if there was a built in self test failure */
post_code(0x34);
report_bist_failure(bist);
/* Load MPB */
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
/* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */
int i;
for(i = 0; i < 200000; i++)
val = inb(0xcd6);
post_code(0x37);
AGESAWRAPPER(amdinitreset);
post_code(0x38);
printk(BIOS_DEBUG, "Got past yangtze_early_setup\n");
post_code(0x39);
AGESAWRAPPER(amdinitearly);
int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed();
if (!s3resume) {
post_code(0x40);
AGESAWRAPPER(amdinitpost);
post_code(0x41);
AGESAWRAPPER(amdinitenv);
/* TODO: Disable cache is not ok. */
disable_cache_as_ram();
} else { /* S3 detect */
printk(BIOS_INFO, "S3 detected\n");
post_code(0x60);
AGESAWRAPPER(amdinitresume);
AGESAWRAPPER(amds3laterestore);
post_code(0x61);
prepare_for_resume();
}
outb(0xEA, 0xCD6);
outb(0x1, 0xcd7);
post_code(0x50);
copy_and_run();
post_code(0x54); /* Should never see this post code. */
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
u32 val;
/*
* All cores: allow caching of flash chip code and data
* (there are no cache-as-ram reliability concerns with family 14h)
*/
__writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5);
__writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800);
/* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */
__writemsr (0xc0010062, 0);
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
sb_Poweron_Init();
post_code(0x31);
fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
}
/* Halt if there was a built in self test failure */
post_code(0x34);
report_bist_failure(bist);
/* Load MPB */
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
post_code(0x35);
AGESAWRAPPER(amdinitmmio);
post_code(0x37);
AGESAWRAPPER(amdinitreset);
post_code(0x39);
AGESAWRAPPER(amdinitearly);
int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed();
if (!s3resume) {
post_code(0x40);
AGESAWRAPPER(amdinitpost);
post_code(0x42);
AGESAWRAPPER(amdinitenv);
} else { /* S3 detect */
printk(BIOS_INFO, "S3 detected\n");
post_code(0x60);
AGESAWRAPPER(amdinitresume);
AGESAWRAPPER(amds3laterestore);
post_code(0x61);
prepare_for_resume();
}
post_code(0x50);
copy_and_run();
printk(BIOS_ERR, "Error: copy_and_run() returned!\n");
post_code(0x54); /* Should never see this post code. */
}
