void SCH_EDIT_FRAME::OrientComponent( COMPONENT_ORIENTATION_T aOrientation )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
wxCHECK_RET( item != NULL && item->Type() == SCH_COMPONENT_T,
wxT( "Cannot change orientation of invalid schematic item." ) );
SCH_COMPONENT* component = (SCH_COMPONENT*) item;
m_canvas->MoveCursorToCrossHair();
if( item->GetFlags() == 0 )
SetUndoItem( item );
INSTALL_UNBUFFERED_DC( dc, m_canvas );
component->SetOrientation( aOrientation );
m_canvas->CrossHairOn( &dc );
if( item->GetFlags() == 0 )
{
addCurrentItemToList();
SchematicCleanUp( true );
}
if( GetScreen()->TestDanglingEnds() )
m_canvas->Refresh();
OnModify();
}
SCH_BUS_WIRE_ENTRY* SCH_EDIT_FRAME::CreateBusWireEntry()
{
// Create and place a new bus entry at cursor position
SCH_BUS_WIRE_ENTRY* busEntry = new SCH_BUS_WIRE_ENTRY( GetCrossHairPosition(), s_LastShape );
busEntry->SetFlags( IS_NEW );
GetScreen()->SetCurItem( busEntry );
addCurrentItemToList();
return busEntry;
}
void SCH_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
pos = wxGetMousePosition();
pos.y += 20;
// If needed, stop the current command and deselect current tool
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_CANCEL_CURRENT_COMMAND:
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
case ID_POPUP_SCH_BEGIN_WIRE:
case ID_POPUP_SCH_BEGIN_BUS:
case ID_POPUP_END_LINE:
case ID_POPUP_SCH_SET_SHAPE_TEXT:
case ID_POPUP_SCH_CLEANUP_SHEET:
case ID_POPUP_SCH_END_SHEET:
case ID_POPUP_SCH_RESIZE_SHEET:
case ID_POPUP_IMPORT_GLABEL:
case ID_POPUP_SCH_INIT_CMP:
case ID_POPUP_SCH_DISPLAYDOC_CMP:
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_DRAG_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
case ID_POPUP_SCH_ENTER_SHEET:
case ID_POPUP_SCH_LEAVE_SHEET:
case ID_POPUP_SCH_ADD_JUNCTION:
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_GETINFO_MARKER:
/* At this point: Do nothing. these commands do not need to stop the
* current command (mainly a block command) or reset the current state
* They will be executed later, in next switch structure.
*/
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
// Stop the current command (if any) but keep the current tool
m_canvas->EndMouseCapture();
break;
default:
// Stop the current command and deselect the current tool
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
item = screen->GetCurItem(); // Can be modified by previous calls.
switch( id )
{
case ID_HIERARCHY:
InstallHierarchyFrame( &dc, pos );
SetRepeatItem( NULL );
break;
case wxID_CUT:
if( screen->m_BlockLocate.GetCommand() != BLOCK_MOVE )
break;
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetRepeatItem( NULL );
SetSheetNumberAndCount();
break;
case wxID_PASTE:
HandleBlockBegin( &dc, BLOCK_PASTE, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '/' );
break;
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '\\' );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
SetToolID( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString );
}
else
{
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
case ID_POPUP_END_LINE:
m_canvas->MoveCursorToCrossHair();
EndSegment( &dc );
break;
case ID_POPUP_SCH_BEGIN_WIRE:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_BEGIN_BUS:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_SET_SHAPE_TEXT:
// Not used
break;
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
m_canvas->MoveCursorToCrossHair();
DeleteConnection( id == ID_POPUP_SCH_DELETE_CONNECTION );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
m_canvas->Refresh();
break;
case ID_POPUP_SCH_BREAK_WIRE:
{
DLIST< SCH_ITEM > oldWires;
oldWires.SetOwnership( false ); // Prevent DLIST for deleting items in destructor.
m_canvas->MoveCursorToCrossHair();
screen->ExtractWires( oldWires, true );
screen->BreakSegment( GetCrossHairPosition() );
if( oldWires.GetCount() != 0 )
{
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
}
screen->TestDanglingEnds( m_canvas, &dc );
}
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
if( item == NULL )
break;
DeleteItem( item );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
SetSheetNumberAndCount();
OnModify();
break;
case ID_POPUP_SCH_END_SHEET:
m_canvas->MoveCursorToCrossHair();
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_RESIZE_SHEET:
ReSizeSheet( (SCH_SHEET*) item, &dc );
screen->TestDanglingEnds( m_canvas, &dc );
break;
case ID_POPUP_IMPORT_GLABEL:
if( item != NULL && item->Type() == SCH_SHEET_T )
screen->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, &dc ) );
break;
case ID_POPUP_SCH_CLEANUP_SHEET:
if( item != NULL && item->Type() == SCH_SHEET_T )
{
SCH_SHEET* sheet = (SCH_SHEET*) item;
if( !sheet->HasUndefinedPins() )
{
DisplayInfoMessage( this,
_( "There are no undefined labels in this sheet to clean up." ) );
return;
}
if( !IsOK( this, _( "Do you wish to cleanup this sheet?" ) ) )
return;
/* Save sheet in undo list before cleaning up unreferenced hierarchical labels. */
SaveCopyInUndoList( sheet, UR_CHANGED );
sheet->CleanupSheet();
OnModify();
m_canvas->RefreshDrawingRect( sheet->GetBoundingBox() );
}
break;
case ID_POPUP_SCH_INIT_CMP:
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
// Ensure the struct is a component (could be a struct of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
m_canvas->MoveCursorToCrossHair();
ConvertPart( (SCH_COMPONENT*) item, &dc );
}
break;
case ID_POPUP_SCH_DISPLAYDOC_CMP:
// Ensure the struct is a component (could be a piece of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
LIB_ALIAS* LibEntry;
LibEntry = CMP_LIBRARY::FindLibraryEntry( ( (SCH_COMPONENT*) item )->GetLibName() );
if( LibEntry && LibEntry->GetDocFileName() != wxEmptyString )
{
GetAssociatedDocument( this, LibEntry->GetDocFileName(),
&wxGetApp().GetLibraryPathList() );
}
}
break;
case ID_POPUP_SCH_ENTER_SHEET:
if( item && (item->Type() == SCH_SHEET_T) )
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
break;
case ID_POPUP_SCH_LEAVE_SHEET:
m_CurrentSheet->Pop();
DisplayCurrentSheet();
break;
case wxID_COPY: // really this is a Save block for paste
screen->m_BlockLocate.SetCommand( BLOCK_SAVE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_PLACE_BLOCK:
m_canvas->SetAutoPanRequest( false );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
screen->m_BlockLocate.SetCommand( BLOCK_ZOOM );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetSheetNumberAndCount();
break;
case ID_POPUP_COPY_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_COPY );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DRAG_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DRAG );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_SCH_ADD_JUNCTION:
m_canvas->MoveCursorToCrossHair();
screen->SetCurItem( AddJunction( &dc, GetCrossHairPosition(), true ) );
screen->TestDanglingEnds( m_canvas, &dc );
screen->SetCurItem( NULL );
break;
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_ADD_GLABEL:
screen->SetCurItem( CreateNewText( &dc, id == ID_POPUP_SCH_ADD_LABEL ?
LAYER_LOCLABEL : LAYER_GLOBLABEL ) );
item = screen->GetCurItem();
if( item )
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_GETINFO_MARKER:
if( item && item->Type() == SCH_MARKER_T )
( (SCH_MARKER*) item )->DisplayMarkerInfo( this );
break;
default: // Log error:
wxFAIL_MSG( wxString::Format( wxT( "Cannot process command event ID %d" ),
event.GetId() ) );
break;
}
// End switch ( id ) (Command execution)
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
void SCH_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
wxPoint gridPosition = GetGridPosition( aPosition );
if( ( GetToolId() == ID_NO_TOOL_SELECTED ) || ( item && item->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
SetRepeatItem( NULL );
if( item && item->GetFlags() )
{
switch( item->Type() )
{
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_SHEET_PIN_T:
case SCH_SHEET_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_FIELD_T:
case SCH_BITMAP_T:
case SCH_NO_CONNECT_T:
addCurrentItemToList();
return;
case SCH_LINE_T: // May already be drawing segment.
break;
default:
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick error. Item type <" ) +
item->GetClass() + wxT( "> is already being edited." ) );
item->ClearFlags();
break;
}
}
else
{
item = LocateAndShowItem( aPosition );
}
}
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_HIGHLIGHT:
HighlightConnectionAtPosition( aPosition );
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
if( ( item && item->GetFlags() ) || ( g_RootSheet->CountSheets() == 0 ) )
break;
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsOnly );
if( item ) // The user has clicked on a sheet: this is an enter sheet command
{
m_CurrentSheet->push_back( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
else if( m_CurrentSheet->Last() != g_RootSheet )
{ // The user has clicked ouside a sheet:this is an leave sheet command
m_CurrentSheet->pop_back();
DisplayCurrentSheet();
}
break;
case ID_NOCONN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( GetScreen()->GetItem( gridPosition, 0, SCH_NO_CONNECT_T ) == NULL )
{
SCH_NO_CONNECT* no_connect = AddNoConnect( aDC, gridPosition );
SetRepeatItem( no_connect );
GetScreen()->SetCurItem( no_connect );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_JUNCTION_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( GetScreen()->GetItem( gridPosition, 0, SCH_JUNCTION_T ) == NULL )
{
SCH_JUNCTION* junction = AddJunction( aDC, gridPosition, true );
SetRepeatItem( junction );
GetScreen()->SetCurItem( junction );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_WIRETOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusWireEntry();
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_BUSTOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusBusEntry();
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
DeleteItemAtCrossHair( aDC );
break;
case ID_WIRE_BUTT:
BeginSegment( aDC, LAYER_WIRE );
m_canvas->SetAutoPanRequest( true );
break;
case ID_BUS_BUTT:
BeginSegment( aDC, LAYER_BUS );
m_canvas->SetAutoPanRequest( true );
break;
case ID_LINE_COMMENT_BUTT:
BeginSegment( aDC, LAYER_NOTES );
m_canvas->SetAutoPanRequest( true );
break;
case ID_TEXT_COMMENT_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_NOTES ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_ADD_IMAGE_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewImage( aDC ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_LABEL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_LOCLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_GLABEL_BUTT:
case ID_HIERLABEL_BUTT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
if( GetToolId() == ID_GLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_GLOBLABEL ) );
if( GetToolId() == ID_HIERLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_HIERLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_SHEET_SYMBOL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = CreateSheet( aDC );
if( item != NULL )
{
GetScreen()->SetCurItem( item );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList();
}
break;
case ID_IMPORT_HLABEL_BUTT:
case ID_SHEET_PIN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsAndSheetLabels );
if( item == NULL )
break;
if( (item->Type() == SCH_SHEET_T) && (item->GetFlags() == 0) )
{
if( GetToolId() == ID_IMPORT_HLABEL_BUTT )
GetScreen()->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, aDC ) );
else
GetScreen()->SetCurItem( CreateSheetPin( (SCH_SHEET*) item, aDC ) );
}
else if( (item->Type() == SCH_SHEET_PIN_T) && (item->GetFlags() != 0) )
{
addCurrentItemToList();
}
break;
case ID_SCH_PLACE_COMPONENT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
GetScreen()->SetCurItem( Load_Component( aDC, NULL,
s_CmpNameList, s_CmpLastUnit, true ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
case ID_PLACE_POWER_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
SCHLIB_FILTER filter;
filter.FilterPowerParts( true );
GetScreen()->SetCurItem( Load_Component( aDC, &filter,
s_PowerNameList, s_LastPowerUnit, false ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList();
}
break;
#ifdef KICAD_SPICE
case ID_SIM_PROBE:
{
const KICAD_T wiresAndComponents[] = { SCH_LINE_T, SCH_COMPONENT_T, SCH_SHEET_PIN_T };
item = LocateAndShowItem( aPosition, wiresAndComponents );
if( !item )
break;
NETLIST_OBJECT_LIST* netlist = BuildNetListBase();
for( NETLIST_OBJECT* obj : *netlist )
{
if( obj->m_Comp == item )
{
SIM_PLOT_FRAME* simFrame = (SIM_PLOT_FRAME*) Kiway().Player( FRAME_SIMULATOR, false );
if( simFrame )
simFrame->AddVoltagePlot( obj->GetNetName() );
break;
}
}
}
break;
case ID_SIM_TUNE:
{
const KICAD_T fieldsAndComponents[] = { SCH_COMPONENT_T, SCH_FIELD_T };
item = LocateAndShowItem( aPosition, fieldsAndComponents );
if( !item )
return;
if( item->Type() != SCH_COMPONENT_T )
{
item = static_cast<SCH_ITEM*>( item->GetParent() );
if( item->Type() != SCH_COMPONENT_T )
return;
}
SIM_PLOT_FRAME* simFrame = (SIM_PLOT_FRAME*) Kiway().Player( FRAME_SIMULATOR, false );
if( simFrame )
simFrame->AddTuner( static_cast<SCH_COMPONENT*>( item ) );
}
break;
#endif /* KICAD_SPICE */
default:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick invalid tool ID <" ) +
wxString::Format( wxT( "%d> selected." ), GetToolId() ) );
}
}
void SCH_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
wxPoint gridPosition = GetGridPosition( aPosition );
if( ( GetToolId() == ID_NO_TOOL_SELECTED ) || ( item && item->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
SetRepeatItem( NULL );
if( item && item->GetFlags() )
{
switch( item->Type() )
{
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_SHEET_PIN_T:
case SCH_SHEET_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_FIELD_T:
case SCH_BITMAP_T:
case SCH_NO_CONNECT_T:
addCurrentItemToList( aDC );
return;
case SCH_LINE_T: // May already be drawing segment.
break;
default:
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick error. Item type <" ) +
item->GetClass() + wxT( "> is already being edited." ) );
item->ClearFlags();
break;
}
}
else
{
item = LocateAndShowItem( aPosition );
}
}
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
if( ( item && item->GetFlags() ) || ( g_RootSheet->CountSheets() == 0 ) )
break;
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsOnly );
if( item ) // The user has clicked on a sheet: this is an enter sheet command
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
else if( m_CurrentSheet->Last() != g_RootSheet )
{ // The user has clicked ouside a sheet:this is an leave sheet command
m_CurrentSheet->Pop();
DisplayCurrentSheet();
}
break;
case ID_NOCONN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( false == GetScreen()->GetItem( gridPosition, 0, SCH_NO_CONNECT_T ) )
{
SCH_NO_CONNECT* no_connect = AddNoConnect( aDC, gridPosition );
SetRepeatItem( no_connect );
GetScreen()->SetCurItem( no_connect );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_JUNCTION_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
if( false == GetScreen()->GetItem( gridPosition, 0, SCH_JUNCTION_T ) )
{
SCH_JUNCTION* junction = AddJunction( aDC, gridPosition, true );
SetRepeatItem( junction );
GetScreen()->SetCurItem( junction );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_WIRETOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusWireEntry( aDC );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_BUSTOBUS_ENTRY_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
CreateBusBusEntry( aDC );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
DeleteItemAtCrossHair( aDC );
break;
case ID_WIRE_BUTT:
BeginSegment( aDC, LAYER_WIRE );
m_canvas->SetAutoPanRequest( true );
break;
case ID_BUS_BUTT:
BeginSegment( aDC, LAYER_BUS );
m_canvas->SetAutoPanRequest( true );
break;
case ID_LINE_COMMENT_BUTT:
BeginSegment( aDC, LAYER_NOTES );
m_canvas->SetAutoPanRequest( true );
break;
case ID_TEXT_COMMENT_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_NOTES ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_ADD_IMAGE_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewImage( aDC ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_LABEL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_LOCLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_GLABEL_BUTT:
case ID_HIERLABEL_BUTT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
if( GetToolId() == ID_GLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_GLOBLABEL ) );
if( GetToolId() == ID_HIERLABEL_BUTT )
GetScreen()->SetCurItem( CreateNewText( aDC, LAYER_HIERLABEL ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_SHEET_SYMBOL_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
item = CreateSheet( aDC );
if( item != NULL )
{
GetScreen()->SetCurItem( item );
m_canvas->SetAutoPanRequest( true );
}
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_IMPORT_HLABEL_BUTT:
case ID_SHEET_PIN_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
item = LocateAndShowItem( aPosition, SCH_COLLECTOR::SheetsAndSheetLabels );
if( item == NULL )
break;
if( (item->Type() == SCH_SHEET_T) && (item->GetFlags() == 0) )
{
if( GetToolId() == ID_IMPORT_HLABEL_BUTT )
GetScreen()->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, aDC ) );
else
GetScreen()->SetCurItem( CreateSheetPin( (SCH_SHEET*) item, aDC ) );
}
else if( (item->Type() == SCH_SHEET_PIN_T) && (item->GetFlags() != 0) )
{
addCurrentItemToList( aDC );
}
break;
case ID_SCH_PLACE_COMPONENT:
if( (item == NULL) || (item->GetFlags() == 0) )
{
GetScreen()->SetCurItem( Load_Component( aDC, wxEmptyString,
s_CmpNameList, s_CmpLastUnit, true ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
case ID_PLACE_POWER_BUTT:
if( ( item == NULL ) || ( item->GetFlags() == 0 ) )
{
GetScreen()->SetCurItem( Load_Component( aDC, wxT( "power" ),
s_PowerNameList, s_LastPowerUnit, false ) );
m_canvas->SetAutoPanRequest( true );
}
else
{
addCurrentItemToList( aDC );
}
break;
default:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
wxFAIL_MSG( wxT( "SCH_EDIT_FRAME::OnLeftClick invalid tool ID <" ) +
wxString::Format( wxT( "%d> selected." ), GetToolId() ) );
}
}
