////////////////////////////////////////////////////////////////////
// Called by RF22Router::recvfromAck whenever a message goes past
void RF22Mesh::peekAtMessage(RoutedMessage* message, uint8_t messageLen)
{
MeshMessageHeader* m = (MeshMessageHeader*)message->data;
if ( messageLen > 1
&& m->msgType == RF22_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_RESPONSE)
{
// This is a unicast RF22_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_RESPONSE messages
// being routed back to the originator here. Want to scrape some routing data out of the response
// We can find the routes to all the nodes between here and the responding node
MeshRouteDiscoveryMessage* d = (MeshRouteDiscoveryMessage*)message->data;
addRouteTo(d->dest, headerFrom());
uint8_t numRoutes = messageLen - sizeof(RoutedMessageHeader) - sizeof(MeshMessageHeader) - 2;
uint8_t i;
// Find us in the list of nodes that were traversed to get to the responding node
for (i = 0; i < numRoutes; i++)
if (d->route[i] == _thisAddress)
break;
i++;
while (i++ < numRoutes)
addRouteTo(d->route[i], headerFrom());
}
else if ( messageLen > 1
&& m->msgType == RF22_MESH_MESSAGE_TYPE_ROUTE_FAILURE)
{
MeshRouteFailureMessage* d = (MeshRouteFailureMessage*)message->data;
deleteRouteTo(d->dest);
}
}
bool RHMesh::doArp(uint8_t address)
{
// Need to discover a route
// Broadcast a route discovery message with nothing in it
MeshRouteDiscoveryMessage* p = (MeshRouteDiscoveryMessage*)&_tmpMessage;
p->header.msgType = RH_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_REQUEST;
p->destlen = 1;
p->dest = address; // Who we are looking for
uint8_t error = RHRouter::sendtoWait((uint8_t*)p, sizeof(RHMesh::MeshMessageHeader) + 2, RH_BROADCAST_ADDRESS);
if (error != RH_ROUTER_ERROR_NONE)
return false;
// Wait for a reply, which will be unicast back to us
// It will contain the complete route to the destination
uint8_t messageLen = sizeof(_tmpMessage);
// FIXME: timeout should be configurable
unsigned long starttime = millis();
while ((millis() - starttime) < 4000)
{
if (RHRouter::recvfromAck(_tmpMessage, &messageLen))
{
if ( messageLen > 1
&& p->header.msgType == RH_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_RESPONSE)
{
// Got a reply, now add the next hop to the dest to the routing table
// The first hop taken is the first octet
addRouteTo(address, headerFrom());
return true;
}
}
YIELD;
}
return false;
}
////////////////////////////////////////////////////////////////////
// This is called when a message is to be delivered to the next hop
uint8_t RF22Mesh::route(RoutedMessage* message, uint8_t messageLen)
{
uint8_t from = headerFrom(); // Might get clobbered during call to superclass route()
uint8_t ret = RF22Router::route(message, messageLen);
if ( ret == RF22_ROUTER_ERROR_NO_ROUTE
|| ret == RF22_ROUTER_ERROR_UNABLE_TO_DELIVER)
{
// Cant deliver to the next hop. Delete the route
deleteRouteTo(message->header.dest);
if (message->header.source != _thisAddress)
{
// This is being proxied, so tell the originator about it
MeshRouteFailureMessage* p = (MeshRouteFailureMessage*)&_tmpMessage;
p->header.msgType = RF22_MESH_MESSAGE_TYPE_ROUTE_FAILURE;
p->dest = message->header.dest; // Who you were trying to deliver to
// Make sure there is a route back towards whoever sent the original message
addRouteTo(message->header.source, from);
ret = RF22Router::sendtoWait((uint8_t*)p, sizeof(RF22Mesh::MeshMessageHeader) + 1, message->header.source);
}
}
return ret;
}
boolean RF22Mesh::recvfromAck(uint8_t* buf, uint8_t* len, uint8_t* source, uint8_t* dest, uint8_t* id, uint8_t* flags)
{
uint8_t tmpMessageLen = sizeof(_tmpMessage);
uint8_t _source;
uint8_t _dest;
uint8_t _id;
uint8_t _flags;
uint8_t frags = 0;
uint8_t offset = 0;
uint8_t total_len = 0;
uint8_t seq_no = 0;
uint8_t x = 0, y = 0;
uint8_t loop_once = 1;
uint8_t have_message = 0;
#ifndef CLIENT
lcd.begin( 20, 4 );
lcd.clear();
#endif
while( frags > 0 || loop_once == 1 ) {
loop_once = 0;
if (RF22Router::recvfromAck(_tmpMessage, &tmpMessageLen, &_source, &_dest, &_id, &_flags))
{
MeshMessageHeader* p = (MeshMessageHeader*)&_tmpMessage;
if ( tmpMessageLen >= 1
&& p->msgType == RF22_MESH_MESSAGE_TYPE_APPLICATION)
{
have_message = 1;
MeshApplicationMessage* a = (MeshApplicationMessage*)p;
// Handle application layer messages, presumably for our caller
if (source) *source = _source;
if (dest) *dest = _dest;
if (id) *id = _id;
if (flags) *flags = _flags;
uint8_t msgLen = tmpMessageLen - sizeof(MeshMessageHeader);
if (*len > msgLen)
*len = msgLen;
frags = a->header.frag;
#ifdef CLIENT
Serial.print( F( "RF22Mesh::recvfromAck frags: " ) );
Serial.println( frags );
#endif
seq_no = a->header.seqno;
if( frags > 0 || (frags == 0 && a->header.seqno > 0 ) ) {
offset = a->header.seqno * RF22_MESH_MAX_MESSAGE_LEN;
}
#ifdef CLIENT
for( int i = 0; i < *len; i++ ) {
Serial.print( a->data[i] );
Serial.print( F( ", " ) );
}
Serial.println( F( "" ) );
#endif
memcpy( buf + offset, a->data, *len );
#ifndef CLIENT
lcd.setCursor( x, y );
lcd.print( *len );
if( ( x + 8 ) > 20 ) {
y++;
x = 0;
} else {
x += 4;
}
#endif
}
else if ( _dest == RF22_BROADCAST_ADDRESS
&& tmpMessageLen > 1
&& p->msgType == RF22_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_REQUEST)
{
MeshRouteDiscoveryMessage* d = (MeshRouteDiscoveryMessage*)p;
// Handle Route discovery requests
// Message is an array of node addresses the route request has already passed through
// If it originally came from us, ignore it
if (_source == _thisAddress)
return false;
uint8_t numRoutes = tmpMessageLen - sizeof(MeshMessageHeader) - 2;
uint8_t i;
// Are we already mentioned?
for (i = 0; i < numRoutes; i++)
if (d->route[i] == _thisAddress)
return false; // Already been through us. Discard
// Hasnt been past us yet, record routes back to the earlier nodes
addRouteTo(_source, headerFrom()); // The originator
for (i = 0; i < numRoutes; i++)
addRouteTo(d->route[i], headerFrom());
if (isPhysicalAddress(&d->dest, d->destlen))
{
// This route discovery is for us. Unicast the whole route back to the originator
// as a RF22_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_RESPONSE
// We are certain to have a route there, becuase we just got it
d->header.msgType = RF22_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_RESPONSE;
RF22Router::sendtoWait((uint8_t*)d, tmpMessageLen, _source);
}
else if (i < _max_hops)
{
// Its for someone else, rebroadcast it, after adding ourselves to the list
d->route[numRoutes] = _thisAddress;
tmpMessageLen++;
// Have to impersonate the source
// REVISIT: if this fails what can we do?
RF22Router::sendtoWait(_tmpMessage, tmpMessageLen, RF22_BROADCAST_ADDRESS, _source);
}
}
} else if( frags == 0 ) {
return false;
} else {
#ifdef CLIENT
Serial.print( F( "corner case: frags: " ) );
Serial.print( frags );
Serial.print( F( "loop_once: " ) );
Serial.println( loop_once );
#endif
}
}
if( have_message == 1 ) {
*len = *len + ( seq_no * RF22_MESH_MAX_MESSAGE_LEN );
#ifdef CLIENT
Serial.print( F( "if have_message: frags: " ) );
Serial.print( frags );
Serial.print( F( "loop_once: " ) );
Serial.println( loop_once );
#endif
#ifndef CLIENT
lcd.setCursor( x, y );
lcd.print( "t" );
lcd.print( *len );
#endif
return true;
} else {
return false;
}
}
bool RHMesh::recvfromAck(uint8_t* buf, uint8_t* len, uint8_t* source, uint8_t* dest, uint8_t* id, uint8_t* flags)
{
uint8_t tmpMessageLen = sizeof(_tmpMessage);
uint8_t _source;
uint8_t _dest;
uint8_t _id;
uint8_t _flags;
if (RHRouter::recvfromAck(_tmpMessage, &tmpMessageLen, &_source, &_dest, &_id, &_flags))
{
MeshMessageHeader* p = (MeshMessageHeader*)&_tmpMessage;
if ( tmpMessageLen >= 1
&& p->msgType == RH_MESH_MESSAGE_TYPE_APPLICATION)
{
MeshApplicationMessage* a = (MeshApplicationMessage*)p;
// Handle application layer messages, presumably for our caller
if (source) *source = _source;
if (dest) *dest = _dest;
if (id) *id = _id;
if (flags) *flags = _flags;
uint8_t msgLen = tmpMessageLen - sizeof(MeshMessageHeader);
if (*len > msgLen)
*len = msgLen;
memcpy(buf, a->data, *len);
return true;
}
else if ( _dest == RH_BROADCAST_ADDRESS
&& tmpMessageLen > 1
&& p->msgType == RH_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_REQUEST)
{
MeshRouteDiscoveryMessage* d = (MeshRouteDiscoveryMessage*)p;
// Handle Route discovery requests
// Message is an array of node addresses the route request has already passed through
// If it originally came from us, ignore it
if (_source == _thisAddress)
return false;
uint8_t numRoutes = tmpMessageLen - sizeof(MeshMessageHeader) - 2;
uint8_t i;
// Are we already mentioned?
for (i = 0; i < numRoutes; i++)
if (d->route[i] == _thisAddress)
return false; // Already been through us. Discard
// Hasnt been past us yet, record routes back to the earlier nodes
addRouteTo(_source, headerFrom()); // The originator
for (i = 0; i < numRoutes; i++)
addRouteTo(d->route[i], headerFrom());
if (isPhysicalAddress(&d->dest, d->destlen))
{
// This route discovery is for us. Unicast the whole route back to the originator
// as a RH_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_RESPONSE
// We are certain to have a route there, becuase we just got it
d->header.msgType = RH_MESH_MESSAGE_TYPE_ROUTE_DISCOVERY_RESPONSE;
RHRouter::sendtoWait((uint8_t*)d, tmpMessageLen, _source);
}
else if (i < _max_hops)
{
// Its for someone else, rebroadcast it, after adding ourselves to the list
d->route[numRoutes] = _thisAddress;
tmpMessageLen++;
// Have to impersonate the source
// REVISIT: if this fails what can we do?
RHRouter::sendtoWait(_tmpMessage, tmpMessageLen, RH_BROADCAST_ADDRESS, _source);
}
}
}
return false;
}