void SettingsPanel::setLaserPreview3d( LaserPreview3D* laserPreview3D ){
mLaserPreview3D = laserPreview3D;
Gwen::Controls::Base* pSlider;
Gwen::Controls::Base* pCheckBox;
// Gwen::Controls::Base* pLabel;
pSlider = addSlider(mLaserCat, getBounds(mLaserCatElements), "Laser Angle", mLaserPreview3D->getLaserAngle(), 0, 90 );
mLaserCatElements.push_back(pSlider);
pCheckBox = addCheckBox(mLaserPreviewCat, getBounds(mLaserPreviewCatElements), "Show Frame", mLaserPreview3D->paramsView.showFrame );
mLaserPreviewCatElements.push_back(pCheckBox);
pCheckBox = addCheckBox(mLaserPreviewCat, getBounds(mLaserPreviewCatElements), "Show Dots on Gauze", mLaserPreview3D->paramsView.showDotsOnGauze );
mLaserPreviewCatElements.push_back(pCheckBox);
pCheckBox = addCheckBox(mLaserPreviewCat, getBounds(mLaserPreviewCatElements), "Show Lines on Gauze", mLaserPreview3D->paramsView.showLinesOnGauze );
mLaserPreviewCatElements.push_back(pCheckBox);
pCheckBox = addCheckBox(mLaserPreviewCat, getBounds(mLaserPreviewCatElements), "Show Rays", mLaserPreview3D->paramsView.showRays );
mLaserPreviewCatElements.push_back(pCheckBox);
pCheckBox = addCheckBox(mLaserPreviewCat, getBounds(mLaserPreviewCatElements), "Show Fans", mLaserPreview3D->paramsView.showFans );
mLaserPreviewCatElements.push_back(pCheckBox);
pSlider = addSlider(mLaserPreviewCat, getBounds(mLaserPreviewCatElements), "Fans Intensity", mLaserPreview3D->paramsView.fansIntensity*100.0f, 0, 100 );
mLaserPreviewCatElements.push_back(pSlider);
}
DelaySection::DelaySection(String name) : SynthSection(name) {
static const int TEMPO_DRAG_SENSITIVITY = 150;
addSlider(frequency_ = new SynthSlider("delay_frequency"));
frequency_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
frequency_->setLookAndFeel(TextLookAndFeel::instance());
addSlider(tempo_ = new SynthSlider("delay_tempo"));
tempo_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
tempo_->setStringLookup(mopo::strings::synced_frequencies);
tempo_->setLookAndFeel(TextLookAndFeel::instance());
tempo_->setMouseDragSensitivity(TEMPO_DRAG_SENSITIVITY);
addSlider(sync_ = new TempoSelector("delay_sync"));
sync_->setSliderStyle(Slider::LinearBar);
sync_->setTempoSlider(tempo_);
sync_->setFreeSlider(frequency_);
sync_->setStringLookup(mopo::strings::freq_sync_styles);
addSlider(feedback_ = new SynthSlider("delay_feedback"));
feedback_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
feedback_->setBipolar();
addSlider(dry_wet_ = new SynthSlider("delay_dry_wet"));
dry_wet_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
addButton(on_ = new ToggleButton("delay_on"));
setActivator(on_);
}
void ofxSimpleGuiToo::addColorPicker2(string name, float *values, bool useFloat, bool displayInteger){
if(!config) setup();
float max = useFloat ? 1 : 255;
addSlider(name+" r",*values,0,max);
addSlider(name+" g",*(values+1),0,max);
addSlider(name+" b",*(values+2),0,max);
addSlider(name+" a",*(values+3),0,max);
}
void ThresholdingFilter::setup()
{
GrayscaleFilter::setup();
addContent("Output", output);
addSlider("Threshold", settings.threshold, 0, 255);
addSlider("Max Value", settings.max_value, 0, 255);
addSlider("Mode", settings.mode, 0, 4);
addToggle("Use Otsu", settings.use_otsu);
}
void GuiApp::setup(void)
{
ofSetWindowTitle("Controls");
gui = new ofxDatGui(ofxDatGuiAnchor::TOP_LEFT);
auto theme = new GuiTheme();
gui->setTheme(theme);
gui->addHeader("boids");
gui->getHeader()->setDraggable(false);
gui->addFRM(0.1);
auto fps_toggle = gui->addToggle("cap to 30 FPS");
fps_toggle->toggleEventCallback = std::bind(&GuiApp::fpsCapToggleEvent, this, std::placeholders::_1);
gui->addBreak();
gui->addLabel("boid controls");
for (const auto &type_boid_pair : Config::boids_by_type) {
const auto &boid_type = type_boid_pair.first;
const auto &boid_type_config = type_boid_pair.second;
auto boid_type_folder = gui->addFolder(BoidMisc::typeToTypename(boid_type));
auto amount_slider = boid_type_folder->addSlider("amount", 1, 1200);
amount_slider->sliderEventCallback = std::bind(&GuiApp::boidTypeAmountChanged, this, std::placeholders::_1, boid_type);
amount_slider->setPrecision(0);
amount_slider->setValue(boid_type_config.amount);
auto infl_max_dist_slider = boid_type_folder->addSlider("infl max dist", 1, 120, boid_type_config.infl_max_dist);
infl_max_dist_slider->sliderEventCallback = std::bind(&GuiApp::boidTypeInflMaxDistChanged, this, std::placeholders::_1, boid_type);
auto angle_of_view_slider = boid_type_folder->addSlider("angle of view", 10, 180, boid_type_config.angle_of_view);
angle_of_view_slider->sliderEventCallback = std::bind(&GuiApp::boidTypeAngleOfViewChanged, this, std::placeholders::_1, boid_type);
auto max_speed_slider = boid_type_folder->addSlider("max speed", 0.5, 10, boid_type_config.max_speed);
max_speed_slider->sliderEventCallback = std::bind(&GuiApp::boidTypeMaxSpeedChanged, this, std::placeholders::_1, boid_type);
auto color_picker = boid_type_folder->addColorPicker("color", boid_type_config.graphics.color);
color_picker->colorPickerEventCallback = std::bind(&GuiApp::boidTypeColorChanged, this, std::placeholders::_1, boid_type);
auto size_slider = boid_type_folder->addSlider("size", 1, 4);
size_slider->sliderEventCallback = std::bind(&GuiApp::boidTypeSizeChanged, this, std::placeholders::_1, boid_type);
size_slider->setPrecision(0);
size_slider->setValue(boid_type_config.graphics.size); // We need to set this after the precision so that the proper precision is applied
auto draw_head_toggle = boid_type_folder->addToggle("draw head", boid_type_config.graphics.draw_head);
draw_head_toggle->toggleEventCallback = std::bind(&GuiApp::boidTypeDrawHeadChanged, this, std::placeholders::_1, boid_type);
}
ofBackground(theme->color.guiBackground);
ofSetFrameRate(60);
}
void DkGradient::init() {
clearAllSliders();
addSlider(0, Qt::black);
addSlider(1, Qt::white);
updateGradient();
};
DynamicSection::DynamicSection(String name) : SynthSection(name) {
addSlider(portamento_ = new SynthSlider("portamento"));
portamento_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
addSlider(portamento_type_ = new SynthSlider("portamento_type"));
portamento_type_->setSliderStyle(Slider::LinearBar);
portamento_type_->setStringLookup(mopo::strings::off_auto_on);
addButton(legato_ = new ToggleButton("legato"));
legato_->setLookAndFeel(TextLookAndFeel::instance());
legato_->setButtonText("");
}
void DkGradient::init() {
isActiveSliderExisting = false;
clearAllSliders();
addSlider(0, Qt::black);
addSlider(1, Qt::white);
updateGradient();
};
void PMUICanvasRibbonRenderer::init(int posX, int posY, bool autosize, int width, int height)
{
PMUICanvasBaseRenderer::init(posX, posY, autosize, width, height);
gradientImage.load("./gradients/gradient4x_512x160.png");
numGradients = 4;
setGlobalSliderHeight(10);
setGlobalButtonDimension(14);
{ // Brush (basic)
addSpacer();
addLabel(STR_BRUSH_BASIC);
addIntSlider(STR_BRUSH_BASIC_NUMPAINTERS, 1, 100, &numPainters);
addIntSlider(STR_BRUSH_BASIC_WIDTH, 1, 10, &strokeWidth);
addSlider(STR_BRUSH_BASIC_SPEED, 1.01f, 100, &speed);
addToggle(STR_BRUSH_BASIC_ENABLEBOUNCE, &enableBounce);
}
{ // Brush (advanced)
addSpacer();
addLabel(STR_BRUSH_ADVANCED);
addSlider(STR_BRUSH_ADVANCED_DIVISIONS, 0.001, 4.5, &divisions);
// addSlider(STR_BRUSH_ADVANCED_EASE, -1.0, 10.0, &ease);
// addSlider("Ease Randomness",0.0,1.0,&easeRandomness);
// addIntSlider(STR_BRUSH_ADVANCED_MAXVERT,3, 4000, &pathMaxVertices);
addSlider("Next Position Delta",0.0,1.0,&nextPositionDelta);
}
{ // Color mode
addSpacer();
addLabel(STR_BRUSH_COLORMODE);
vector<string> colorModesNames;
colorModesNames.push_back(STR_BRUSH_COLORMODE_MFIXEDCOLOR);
colorModesNames.push_back(STR_BRUSH_COLORMODE_MGRSPEED);
colorModesNames.push_back(STR_BRUSH_COLORMODE_MGREDGES);
addRadio(STR_BRUSH_COLORMODE_RADIO, colorModesNames, OFX_UI_ORIENTATION_VERTICAL);
addImageSampler(STR_BRUSH_COLORMODE_GRIMAGE, &gradientImage);
addIntSlider(STR_BRUSH_COLORMODE_GRID, 1, 4, &gradientId);
addIntSlider(STR_BRUSH_COLORMODE_GRSPEED, 1, 500, &gradientSpeed);
addIntSlider(STR_BRUSH_COLORMODE_R, 0, 255, &colorR);
addIntSlider(STR_BRUSH_COLORMODE_G, 0, 255, &colorG);
addIntSlider(STR_BRUSH_COLORMODE_B, 0, 255, &colorB);
}
if (autosize) autoSizeToFitWidgets();
loadPreset(selectedPreset);
}
void VCFrame::slotMenuCallback(int item)
{
switch (item)
{
case KVCMenuAddButton:
addButton();
break;
case KVCMenuAddSlider:
addSlider();
break;
case KVCMenuAddFrame:
addFrame();
break;
case KVCMenuAddXYPad:
addXYPad();
break;
case KVCMenuAddLabel:
addLabel();
break;
default:
VCWidget::slotMenuCallback(item);
break;
}
}
FeedbackSection::FeedbackSection(String name) : SynthSection(name) {
addSlider(transpose_ = new SynthSlider("osc_feedback_transpose"));
transpose_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
transpose_->setBipolar();
addSlider(amount_ = new SynthSlider("osc_feedback_amount"));
amount_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
amount_->setBipolar();
addSlider(tune_ = new SynthSlider("osc_feedback_tune"));
tune_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
tune_->setBipolar();
addSlider(saturation_ = new SynthSlider("filter_saturation"));
saturation_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
}
void FiducialTrackingFilter::setup()
{
GrayscaleFilter::setup();
fidFinder.detectFinger = true;
fidFinder.maxFingerSize = 25;
fidFinder.minFingerSize = 5;
fidFinder.fingerSensitivity = 0.05f; //from 0 to 2.0f
addContent("Output", output);
addToggle("Detect Fingers", fidFinder.detectFinger);
addSlider("Min Finger Size", fidFinder.minFingerSize, 0, 50);
addSlider("Max Finger Size", fidFinder.maxFingerSize, 0, 50);
addSlider("Finger Sensitivity", fidFinder.fingerSensitivity, 0.0, 2.0);
output.set(0);
}
ECPotentiometer::ECPotentiometer(ICNDocument *icnDocument, bool newItem, const char *id)
: Component(icnDocument, newItem, id ? id : "potentiometer")
{
m_name = i18n("Potentiometer");
setSize(-16, -16, 40, 32);
ECNode *m_p1 = createPin(32, 0, 180, "p1");
m_sliderProp = 0.0;
m_resistance = 5000.;
setup2pinElement(m_r1, createPin(-8, -24, 90, "n1")->pin(), m_p1->pin());
setup2pinElement(m_r2, createPin(-8, 24, 270, "n2")->pin(), m_p1->pin());
Slider * s = addSlider("slider", 0, 100, 5, 50, Qt::Vertical, QRect(0, -16, 16, 32));
m_pSlider = static_cast<QSlider*>(s->widget());
createProperty("resistance", Variant::Type::Double);
property("resistance")->setCaption(i18n("Resistance"));
property("resistance")->setUnit(QChar(0x3a9));
property("resistance")->setMinValue(1e-6);
property("resistance")->setValue(1e5);
addDisplayText("res", QRect(-56, -8, 40, 16), "");
}
void SliderDialog::editSlider()
{
SliderSettingsDialog* pSettingsDialog = new SliderSettingsDialog(this);
assert(CCopasiRootContainer::getDatamodelList()->size() > 0);
pSettingsDialog->setModel((*CCopasiRootContainer::getDatamodelList())[0]->getModel());
// set the list of sliders that is already known
CCopasiObject* object = (CCopasiObject*)getTaskForFolderId(mCurrentFolderId);
if (!object) return;
std::vector<CSlider*>* pVector = getCSlidersForCurrentFolderId();
pSettingsDialog->setDefinedSliders(*pVector);
//pSettingsDialog->disableObjectChoosing(true);
pSettingsDialog->setSlider(mpCurrSlider->getCSlider());
if (pSettingsDialog->exec() == QDialog::Accepted)
{
addSlider(pSettingsDialog->getSlider());
mpCurrSlider->updateSliderData();
/*
if ((!mpCurrSlider->isEnabled()) && mpCurrSlider->getCSlider()->compile())
{
mpCurrSlider->setEnabled(true);
}
*/
}
delete pSettingsDialog;
delete pVector;
}
FullInterface::FullInterface(mopo::control_map controls, mopo::output_map modulation_sources,
mopo::output_map mono_modulations,
mopo::output_map poly_modulations,
MidiKeyboardState* keyboard_state) : SynthSection("full_interface") {
addSubSection(synthesis_interface_ = new SynthesisInterface(controls, keyboard_state));
addSubSection(arp_section_ = new ArpSection("ARP"));
addSlider(beats_per_minute_ = new SynthSlider("beats_per_minute"));
beats_per_minute_->setSliderStyle(Slider::LinearBar);
beats_per_minute_->setTextBoxStyle(Slider::TextBoxAbove, false, 150, 20);
beats_per_minute_->setColour(Slider::textBoxTextColourId, Colours::white);
addAndMakeVisible(global_tool_tip_ = new GlobalToolTip());
addAndMakeVisible(patch_selector_ = new PatchSelector());
addAndMakeVisible(oscilloscope_ = new Oscilloscope());
setAllValues(controls);
createModulationSliders(modulation_sources, mono_modulations, poly_modulations);
logo_button_ = new ImageButton("logo_button");
const Desktop::Displays::Display& display = Desktop::getInstance().getDisplays().getMainDisplay();
if (display.scale > 1.5) {
Image helm = ImageCache::getFromMemory(BinaryData::helm_icon_128_2x_png,
BinaryData::helm_icon_128_2x_pngSize);
logo_button_->setImages(false, true, false,
helm, 1.0, Colours::transparentBlack,
helm, 1.0, Colour(0x11ffffff),
helm, 1.0, Colour(0x11000000));
}
else {
Image helm_small = ImageCache::getFromMemory(BinaryData::helm_icon_32_2x_png,
BinaryData::helm_icon_32_2x_pngSize);
logo_button_->setImages(false, true, false,
helm_small, 1.0, Colours::transparentBlack,
helm_small, 1.0, Colour(0x11ffffff),
helm_small, 1.0, Colour(0x11000000));
}
addAndMakeVisible(logo_button_);
logo_button_->addListener(this);
addChildComponent(patch_browser_ = new PatchBrowser());
patch_selector_->setBrowser(patch_browser_);
addChildComponent(save_section_ = new SaveSection("save_section"));
patch_browser_->setSaveSection(save_section_);
patch_selector_->setSaveSection(save_section_);
addChildComponent(delete_section_ = new DeleteSection("delete_section"));
patch_browser_->setDeleteSection(delete_section_);
about_section_ = new AboutSection("about");
addChildComponent(about_section_);
update_check_section_ = new UpdateCheckSection("update_check");
addChildComponent(update_check_section_);
setOpaque(true);
}
void ContourFindingFilter::setup()
{
GrayscaleFilter::setup();
addContent("Output", output);
addSlider("Blobs", settings.num_blobs, 1, 10);
addToggle("Find Holes", settings.find_holes);
}
void See::addHidden(Board* board, int startIndex) {
int pieceType = ATTACK_ARRAY[moveTo - startIndex + 128];
switch (pieceType) {
case ATTACK_KQR:
case ATTACK_QR:
addSlider(board, startIndex, DELTA_ARRAY[startIndex - moveTo + 128],
W_ROOK);
break;
case ATTACK_KQBwP:
case ATTACK_KQBbP:
case ATTACK_QB:
addSlider(board, startIndex, DELTA_ARRAY[startIndex - moveTo + 128],
W_BISHOP);
break;
}
}
LLMultiSlider::LLMultiSlider(const LLMultiSlider::Params& p)
: LLF32UICtrl(p),
mMouseOffset( 0 ),
mDragStartThumbRect( 0, getRect().getHeight(), p.thumb_width, 0 ),
mMaxNumSliders(p.max_sliders),
mAllowOverlap(p.allow_overlap),
mDrawTrack(p.draw_track),
mUseTriangle(p.use_triangle),
mTrackColor(p.track_color()),
mThumbOutlineColor(p.thumb_outline_color()),
mThumbCenterColor(p.thumb_center_color()),
mThumbCenterSelectedColor(p.thumb_center_selected_color()),
mDisabledThumbColor(p.thumb_disabled_color()),
mTriangleColor(p.triangle_color()),
mThumbWidth(p.thumb_width),
mMouseDownSignal(NULL),
mMouseUpSignal(NULL)
{
mValue.emptyMap();
mCurSlider = LLStringUtil::null;
if (p.mouse_down_callback.isProvided())
{
setMouseDownCallback(initCommitCallback(p.mouse_down_callback));
}
if (p.mouse_up_callback.isProvided())
{
setMouseUpCallback(initCommitCallback(p.mouse_up_callback));
}
for (LLInitParam::ParamIterator<SliderParams>::const_iterator it = p.sliders.begin();
it != p.sliders.end();
++it)
{
if (it->name.isProvided())
{
addSlider(it->value, it->name);
}
else
{
addSlider(it->value);
}
}
}
void VoxelBufferFilter::setup()
{
GrayscaleFilter::setup();
numCaptureFrames = 90;
frameOffsetBytes = 0;
capturedFrames = 0;
volumeSize[0] = videoSize.x;
volumeSize[1] = videoSize.y;
volumeSize[2] = numCaptureFrames;
addToggle("Capture", settings.do_capture);
addSlider("Num. Capture Frames", numCaptureFrames, 1, 512);
captureProgressSlider = &addSlider("Capture Progress", capturedFrames, 0, numCaptureFrames);
h_volume = (unsigned char*)malloc(videoSize.x*videoSize.y*numCaptureFrames);
enableKeyEvents();
}
void AdaptiveSkinFilter::setup()
{
ColorFilter::setup();
bgrInput.allocate(videoSize.x, videoSize.y);
grayOutput.allocate(videoSize.x, videoSize.y);
addContent("Output", &output);
addContent("BGR Input", &bgrInput);
addSlider("Morphing Method",
&settings.morphing_mode, 0, 3);
}
VariableCapacitor::VariableCapacitor(ICNDocument* icnDocument, bool newItem, const QString& id)
: SimpleComponent(icnDocument, newItem, id ? id : "variable capacitor"),
m_pCapacitance(m_currCapacitance, LINEAR_UPDATE_PERIOD) {
m_name = i18n("Variable Capacitor");
// Top Left(x,y) from centre point, width, height.
setSize(-16, -8, 32, 16);
// william - you might want to change this value. I added this line as it
// was being used unitialized (in the sliderValueChanged function when
// addSlider is called later on), and causing a crash - david.
m_tickValue = 1;
m_maxCapacitance = 0.0001;
m_minCapacitance = 0.00005;
m_currCapacitance = m_minCapacitance + ((m_maxCapacitance - m_minCapacitance) / 2);
init1PinLeft();
init1PinRight();
m_pNNode[0]->setLength(15);
m_pPNode[0]->setLength(15);
setup2pinElement(m_pCapacitance, m_pNNode[0]->pin(), m_pPNode[0]->pin());
addDisplayText("capacitance", QRect(-8, -26, 16, 16), "", false);
createProperty("currcapacitance", Variant::Type::Double);
property("currcapacitance")->setCaption(i18n("Capacitance"));
property("currcapacitance")->setUnit("F");
property("currcapacitance")->setMinValue(1e-12);
property("currcapacitance")->setMaxValue(1e12);
property("currcapacitance")->setValue(m_currCapacitance);
createProperty("maximum capacitance", Variant::Type::Double);
property("maximum capacitance")->setCaption(i18n("Max"));
property("maximum capacitance")->setUnit("F");
property("maximum capacitance")->setMinValue(1e-12);
property("maximum capacitance")->setMaxValue(1e12);
property("maximum capacitance")->setValue(m_maxCapacitance);
createProperty("minimum capacitance", Variant::Type::Double);
property("minimum capacitance")->setCaption(i18n("Min"));
property("minimum capacitance")->setUnit("F");
property("minimum capacitance")->setMinValue(1e-12);
property("minimum capacitance")->setMaxValue(1e12);
property("minimum capacitance")->setValue(m_minCapacitance);
Slider * s = addSlider("slider", 0, 100, 1, 50, Qt::Horizontal, QRect(-16, 10, 32, 16));
m_pSlider = static_cast<QSlider*>(s->widget());
}
void SettingsPanel::setOutputOptions(MainController* mc){
mMainController = mc;
Gwen::Controls::Base* pSlider;
Gwen::Controls::Base* pCheckBox;
Gwen::Controls::Base* pLabel;
// pLabel = addProperty(mLaserCat, getBounds(mLaserCatElements), "Main speed", mMainController->getDataManager()->getMainSpeed());
// mLaserCatElements.push_back(pLabel);
pSlider = addSlider(mLaserCat, getBounds(mLaserCatElements), "Main speed", mMainController->getDataManager()->getMainSpeed()*100, 50, 1000 );
mLaserCatElements.push_back(pSlider);
}
void SobelFilterOcl::setup()
{
ColorFilter::setup();
rgbaInput.allocate(videoSize.x, videoSize.y);
grayOutput.allocate(videoSize.x, videoSize.y);
oclSobelFilter.input = rgbaInput.getCvImage()->imageData;
oclSobelFilter.output = grayOutput.getCvImage()->imageData;
addContent("RGBA", rgbaInput);
addContent("Output", output);
addSlider("Threshold", oclSobelFilter.threshold, 0.0, 255.0);
oclSobelFilter.loadFromFile("sobelFilter.cl");
clScheduler->initKernel(oclSobelFilter);
}
VariableResistor::VariableResistor( ICNDocument* icnDocument, bool newItem, const QString& id )
: Component( icnDocument, newItem, (!id.isEmpty()) ? id : "variable resistor" )
{
m_name = i18n("Resistor");
// Top Left(x,y) from centre point, width, height.
setSize( -16, -16, 32, 32 );
init1PinLeft();
init1PinRight();
// (see comment in variablecapacitor.cpp) - david
m_tickValue = 1;
m_minResistance = 0.5;
m_maxResistance = 1.0;
m_currResistance = m_minResistance + ( ( m_maxResistance - m_minResistance ) / 2 ) ;
m_pResistance = createResistance( m_pPNode[0], m_pNNode[0], m_currResistance );
createProperty( "resistance", Variant::Type::Double );
property("resistance")->setCaption( i18n("Resistance") );
property("resistance")->setUnit( QChar( 0x3a9 ) );
property("resistance")->setMinValue( 1e-6 );
property("resistance")->setValue( m_currResistance );
createProperty( "minimum resistance", Variant::Type::Double );
property("minimum resistance")->setCaption( i18n("Min") );
property("minimum resistance")->setUnit( QChar( 0x3a9 ) );
property("minimum resistance")->setMinValue( 1e-6 );
property("minimum resistance")->setValue( m_minResistance );
createProperty( "maximum resistance", Variant::Type::Double );
property("maximum resistance")->setCaption( i18n("Max") );
property("maximum resistance")->setUnit( QChar( 0x3a9 ) );
property("maximum resistance")->setMinValue( 1e-6 );
property("maximum resistance")->setValue( m_maxResistance );
addDisplayText( "res", QRect( -16, -26, 32, 12 ), "", false );
Slider * s = addSlider( "slider", 0, 100, 1, 50, Qt::Horizontal, QRect( -16, 14, width(), 16 ) );
m_pSlider = static_cast<QSlider*>( s->widget() );
}
void DkGradient::setGradient(const QLinearGradient& gradient) {
reset();
clearAllSliders(); // reset adds a slider at the start and end
this->gradient.setStops(gradient.stops());
QVector<QGradientStop> stops = gradient.stops();
for (int idx = 0; idx < stops.size(); idx++) {
addSlider(stops.at(idx).first, stops.at(idx).second);
}
updateGradient();
update();
emit gradientChanged();
}
void CalibrationFilter::setup()
{
ColorFilter::setup();
grayInput.allocate(videoSize.x, videoSize.y);
tempImage.allocate(videoSize.x, videoSize.y);
shownCapture.allocate(videoSize.x, videoSize.y);
addContent("Output", &output);
showCapturesSlider = addSlider("Previous Captures", &settings.show_capture, 0, settings.min_captures);
addContent("Selected Capture", &shownCapture);
addButton("Capture", &settings.capture);
// addToggle("Once", &settings.once);
// addSlider2d("Chessboard Corners", &targetCorners, 2.0, 7.0, 2.0, 7.0);
addToggle("Interpolate", &settings.do_interpolate);
addButton("Calculate", &settings.calc_undistort);
addToggle("Undistort Stream", &settings.do_undistort);
addToggle("Guess Lens Intrinsics", &settings.guess_intrinsics);
}
StutterSection::StutterSection(String name) : SynthSection(name) {
static const int TEMPO_DRAG_SENSITIVITY = 150;
addSlider(stutter_frequency_ = new SynthSlider("stutter_frequency"));
stutter_frequency_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
stutter_frequency_->setLookAndFeel(TextLookAndFeel::instance());
addSlider(stutter_tempo_ = new SynthSlider("stutter_tempo"));
stutter_tempo_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
stutter_tempo_->setStringLookup(mopo::strings::synced_frequencies);
stutter_tempo_->setLookAndFeel(TextLookAndFeel::instance());
stutter_tempo_->setMouseDragSensitivity(TEMPO_DRAG_SENSITIVITY);
addSlider(stutter_sync_ = new TempoSelector("stutter_sync"));
stutter_sync_->setSliderStyle(Slider::LinearBar);
stutter_sync_->setTempoSlider(stutter_tempo_);
stutter_sync_->setFreeSlider(stutter_frequency_);
stutter_sync_->setStringLookup(mopo::strings::freq_sync_styles);
addSlider(resample_frequency_ = new SynthSlider("stutter_resample_frequency"));
resample_frequency_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
resample_frequency_->setLookAndFeel(TextLookAndFeel::instance());
addSlider(resample_tempo_ = new SynthSlider("stutter_resample_tempo"));
resample_tempo_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
resample_tempo_->setStringLookup(mopo::strings::synced_frequencies);
resample_tempo_->setLookAndFeel(TextLookAndFeel::instance());
resample_tempo_->setMouseDragSensitivity(TEMPO_DRAG_SENSITIVITY);
addSlider(resample_sync_ = new TempoSelector("stutter_resample_sync"));
resample_sync_->setSliderStyle(Slider::LinearBar);
resample_sync_->setTempoSlider(resample_tempo_);
resample_sync_->setFreeSlider(resample_frequency_);
resample_sync_->setStringLookup(mopo::strings::freq_sync_styles);
addSlider(stutter_softness_ = new SynthSlider("stutter_softness"));
stutter_softness_->setSliderStyle(Slider::LinearBar);
addButton(on_ = new ToggleButton("stutter_on"));
setActivator(on_);
}
//==============================================================================
sBMP4AudioProcessorEditor::sBMP4AudioProcessorEditor(sBMP4AudioProcessor& processor)
: AudioProcessorEditor(processor)
, m_oMidiKeyboard(processor.m_oKeyboardState, MidiKeyboardComponent::horizontalKeyboard)
, m_oWaveSlider("wave")
, m_oWaveLabel("", "wave")
, m_oFilterSlider("Filter")
, m_oFilterLabel("", "LP filter")
, m_oQSlider("Resonance")
, m_oQLabel("", "Resonance")
, m_oLfoSlider("LFO")
, m_oDelaySlider("delay")
, m_oDelayLabel("", "delay")
, m_oGainSlider("gain")
, m_oGainLabel("", "gain")
, m_oSineImage("sine")
, m_oSawImage("saw")
, m_oTriangleImage("triangle")
, m_oSLogoLabel("", "s")
, m_oLogoLabel("", "BMP4")
, m_oLogoImage("sBMP4")
{
addSlider(&m_oWaveSlider, 1.f/3);
addSlider(&m_oLfoSlider, .01);
addSlider(&m_oFilterSlider, .01);
addSlider(&m_oQSlider, .01);
addSlider(&m_oDelaySlider, .01);
addSlider(&m_oGainSlider, .01);
addToggleButton(&m_oLfoTogBut);
m_oLfoTogBut.setButtonText("LFO");
addToggleButton(&m_oSubOscTogBut);
m_oSubOscTogBut.setButtonText("Sub Osc");
m_oSineImage.setImage(ImageFileFormat::loadFrom (BinaryData::sine_png, (size_t) BinaryData::sine_pngSize));
m_oSawImage.setImage(ImageFileFormat::loadFrom (BinaryData::saw_png, (size_t) BinaryData::saw_pngSize));
m_oSquareImage.setImage(ImageFileFormat::loadFrom (BinaryData::square_png, (size_t) BinaryData::square_pngSize));
m_oTriangleImage.setImage(ImageFileFormat::loadFrom (BinaryData::triangle_png, (size_t) BinaryData::triangle_pngSize));
m_oLogoImage.setImage(ImageFileFormat::loadFrom (BinaryData::main_png, (size_t) BinaryData::main_pngSize));
addAndMakeVisible(m_oSineImage);
addAndMakeVisible(m_oSawImage);
addAndMakeVisible(m_oSquareImage);
addAndMakeVisible(m_oTriangleImage);
#if USE_LOGO_LBL
addLabel(&m_oSLogoLabel);
Font logoFont = mLookAndFeel.getFont();
logoFont.setHeight(20.f);
m_oLogoLabel.setFont(logoFont);
m_oLogoLabel.setColour(Label::textColourId, mLookAndFeel.getFontColour());
m_oLogoLabel.setJustificationType(Justification::centred);
addAndMakeVisible(m_oLogoLabel);
#else
addAndMakeVisible(m_oLogoImage);
#endif
// add some labels for the sliders
addLabel(&m_oWaveLabel);
addLabel(&m_oFilterLabel);
addLabel(&m_oQLabel);
addLabel(&m_oGainLabel);
addLabel(&m_oDelayLabel);
addAndMakeVisible (m_oMidiKeyboard);
// add the triangular m_pResizer component for the bottom-right of the UI
addAndMakeVisible (m_pResizer = new ResizableCornerComponent (this, &m_oResizeLimits));
m_oResizeLimits.setSizeLimits (processor.getDimensions().first, processor.getDimensions().second,
2*processor.getDimensions().first, 2*processor.getDimensions().second);
// set our component's initial size to be the last one that was stored in the filter's settings
setSize (processor.getDimensions().first, processor.getDimensions().second);
startTimer (50);
}
NoiseSection::NoiseSection(String name) : SynthSection(name) {
addSlider(volume_ = new SynthSlider("noise_volume"));
volume_->setSliderStyle(Slider::RotaryHorizontalVerticalDrag);
}
void SliderDialog::createNewSlider()
{
// allow the user to create more than one slider
std::vector<const CCopasiObject*> objects = CCopasiSelectionDialog::getObjectVector(this,
CQSimpleSelectionTree::InitialTime |
CQSimpleSelectionTree::Parameters);
std::vector<CSlider*>* pVector = getCSlidersForCurrentFolderId();
std::vector<const CCopasiObject*>::const_iterator it = objects.begin(), endit = objects.end();
bool yesToAll = false;
bool noToAll = false;
// create the sliders for all the selected objects
// first we need the task object because we need it later to associate the
// later with the correct task
CCopasiObject* object = (CCopasiObject*)getTaskForFolderId(mCurrentFolderId);
if (!object) return;
CCopasiObject* pTmpObject = NULL;
while (it != endit)
{
// create a new slider
assert((*it) != NULL);
pTmpObject = const_cast<CCopasiObject*>(determineCorrectObjectForSlider(*it));
CSlider* pCSlider = new CSlider("slider", (*CCopasiRootContainer::getDatamodelList())[0]);
if (pCSlider)
{
pCSlider->setSliderObject(pTmpObject);
pCSlider->setAssociatedEntityKey(object->getKey());
// check if a slider for that object already exists and if so, prompt
// the user what to do
CSlider* pEquivalentSlider = equivalentSliderExists(pCSlider);
if (pEquivalentSlider != NULL)
{
CopasiSlider* pCopasiSlider = NULL;
// if the user has specified yesToAll, we reset the ranges of all
// duplicate sliders
if (yesToAll)
{
pEquivalentSlider->resetRange();
// update the slider widget
pCopasiSlider = findCopasiSliderForCSlider(pEquivalentSlider);
assert(pCopasiSlider != NULL);
if (pCopasiSlider != NULL)
{
pCopasiSlider->updateSliderData();
}
}
// if the user has not specified noToAll, we need to prompt
else if (!noToAll)
{
QMessageBox::StandardButton result = CQMessageBox::information(NULL, "Slider Exists",
"A slider for this object already exists.\n\nDo you want to reset the range of the slider?",
QMessageBox::Yes | QMessageBox::No | QMessageBox::YesToAll | QMessageBox::NoToAll, QMessageBox::No);
// check the answer and maybe set some flags
switch (result)
{
case QMessageBox::YesToAll:
// set the flag
yesToAll = true;
case QMessageBox::Yes:
// reset the range
pEquivalentSlider->resetRange();
// update the slider widget
pCopasiSlider = findCopasiSliderForCSlider(pEquivalentSlider);
assert(pCopasiSlider != NULL);
if (pCopasiSlider != NULL)
{
pCopasiSlider->updateSliderData();
}
break;
case QMessageBox::NoToAll:
// set the flag
noToAll = true;
break;
case QMessageBox::No:
// do nothing else
break;
default:
// do nothing
break;
}
}
delete pCSlider;
}
else
{
std::vector<CCopasiContainer*> listOfContainers;
assert(CCopasiRootContainer::getDatamodelList()->size() > 0);
listOfContainers.push_back((*CCopasiRootContainer::getDatamodelList())[0]->getModel());
pCSlider->compile(listOfContainers);
pCSlider->resetRange();
addSlider(pCSlider);
mChanged = true;
}
}
++it;
}
delete pVector;
}
