/*
* This is the handler to receive message for this test. It is used to
* control and verify the behavior of the message transmitted by the
* transaction.
*/
static pj_bool_t msg_receiver_on_rx_request(pjsip_rx_data *rdata)
{
if (pj_strcmp2(&rdata->msg_info.via->branch_param, TEST1_BRANCH_ID) == 0) {
/*
* The TEST1_BRANCH_ID test performs the verifications for transaction
* retransmission mechanism. It will not answer the incoming request
* with any response.
*/
pjsip_msg *msg = rdata->msg_info.msg;
PJ_LOG(4,(THIS_FILE, " received request"));
/* Only wants to take INVITE or OPTIONS method. */
if (msg->line.req.method.id != PJSIP_INVITE_METHOD &&
msg->line.req.method.id != PJSIP_OPTIONS_METHOD)
{
PJ_LOG(3,(THIS_FILE, " error: received unexpected method %.*s",
msg->line.req.method.name.slen,
msg->line.req.method.name.ptr));
test_complete = -600;
return PJ_TRUE;
}
if (recv_count == 0) {
recv_count++;
//pj_gettimeofday(&recv_last);
recv_last = rdata->pkt_info.timestamp;
} else {
pj_time_val now;
unsigned msec_expected, msec_elapsed;
int max_received;
//pj_gettimeofday(&now);
now = rdata->pkt_info.timestamp;
PJ_TIME_VAL_SUB(now, recv_last);
msec_elapsed = now.sec*1000 + now.msec;
++recv_count;
msec_expected = (1<<(recv_count-2))*PJSIP_T1_TIMEOUT;
if (msg->line.req.method.id != PJSIP_INVITE_METHOD) {
if (msec_expected > PJSIP_T2_TIMEOUT)
msec_expected = PJSIP_T2_TIMEOUT;
max_received = 11;
} else {
max_received = 7;
}
if (DIFF(msec_expected, msec_elapsed) > TEST1_ALLOWED_DIFF) {
PJ_LOG(3,(THIS_FILE,
" error: expecting retransmission no. %d in %d "
"ms, received in %d ms",
recv_count-1, msec_expected, msec_elapsed));
test_complete = -610;
}
if (recv_count > max_received) {
PJ_LOG(3,(THIS_FILE,
" error: too many messages (%d) received",
recv_count));
test_complete = -620;
}
//pj_gettimeofday(&recv_last);
recv_last = rdata->pkt_info.timestamp;
}
return PJ_TRUE;
} else
if (pj_strcmp2(&rdata->msg_info.via->branch_param, TEST4_BRANCH_ID) == 0) {
/*
* The TEST4_BRANCH_ID test simulates transport failure after several
* retransmissions.
*/
recv_count++;
if (recv_count == TEST4_RETRANSMIT_CNT) {
/* Simulate transport failure. */
pjsip_loop_set_failure(loop, 2, NULL);
} else if (recv_count > TEST4_RETRANSMIT_CNT) {
PJ_LOG(3,(THIS_FILE," error: not expecting %d-th packet!",
recv_count));
test_complete = -631;
}
return PJ_TRUE;
} else
if (pj_strcmp2(&rdata->msg_info.via->branch_param, TEST5_BRANCH_ID) == 0) {
/*
* The TEST5_BRANCH_ID test simulates user terminating the transaction
* after several retransmissions.
*/
recv_count++;
if (recv_count == TEST5_RETRANSMIT_CNT+1) {
pj_str_t key;
pjsip_transaction *tsx;
pjsip_tsx_create_key( rdata->tp_info.pool, &key, PJSIP_ROLE_UAC,
&rdata->msg_info.msg->line.req.method, rdata);
tsx = pjsip_tsx_layer_find_tsx(&key, PJ_TRUE);
if (tsx) {
pjsip_tsx_terminate(tsx, PJSIP_SC_REQUEST_TERMINATED);
pj_mutex_unlock(tsx->mutex);
} else {
PJ_LOG(3,(THIS_FILE, " error: uac transaction not found!"));
test_complete = -633;
}
} else if (recv_count > TEST5_RETRANSMIT_CNT+1) {
PJ_LOG(3,(THIS_FILE," error: not expecting %d-th packet!",
recv_count));
test_complete = -634;
}
return PJ_TRUE;
} else
if (pj_strcmp2(&rdata->msg_info.via->branch_param, TEST6_BRANCH_ID) == 0) {
/*
* The TEST6_BRANCH_ID test successfull non-INVITE transaction.
*/
pj_status_t status;
recv_count++;
if (recv_count > 1) {
PJ_LOG(3,(THIS_FILE," error: not expecting %d-th packet!",
recv_count));
test_complete = -635;
}
status = pjsip_endpt_respond_stateless(endpt, rdata, 202, NULL,
NULL, NULL);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to send response", status);
test_complete = -636;
}
return PJ_TRUE;
} else
if (pj_strcmp2(&rdata->msg_info.via->branch_param, TEST7_BRANCH_ID) == 0) {
/*
* The TEST7_BRANCH_ID test successfull non-INVITE transaction
* with provisional response.
*/
pj_status_t status;
pjsip_response_addr res_addr;
struct response *r;
pjsip_tx_data *tdata;
pj_time_val delay = { 2, 0 };
recv_count++;
if (recv_count > 1) {
PJ_LOG(3,(THIS_FILE," error: not expecting %d-th packet!",
recv_count));
test_complete = -640;
return PJ_TRUE;
}
/* Respond with provisional response */
status = pjsip_endpt_create_response(endpt, rdata, 100, NULL, &tdata);
pj_assert(status == PJ_SUCCESS);
status = pjsip_get_response_addr(tdata->pool, rdata, &res_addr);
pj_assert(status == PJ_SUCCESS);
status = pjsip_endpt_send_response(endpt, &res_addr, tdata,
NULL, NULL);
pj_assert(status == PJ_SUCCESS);
/* Create the final response. */
status = pjsip_endpt_create_response(endpt, rdata, 202, NULL, &tdata);
pj_assert(status == PJ_SUCCESS);
/* Schedule sending final response in couple of of secs. */
r = pj_pool_alloc(tdata->pool, sizeof(*r));
r->res_addr = res_addr;
r->tdata = tdata;
if (r->res_addr.transport)
pjsip_transport_add_ref(r->res_addr.transport);
timer.entry.cb = &send_response_callback;
timer.entry.user_data = r;
pjsip_endpt_schedule_timer(endpt, &timer.entry, &delay);
return PJ_TRUE;
} else
if (pj_strcmp2(&rdata->msg_info.via->branch_param, TEST8_BRANCH_ID) == 0) {
/*
* The TEST8_BRANCH_ID test failed INVITE transaction.
*/
pjsip_method *method;
pj_status_t status;
method = &rdata->msg_info.msg->line.req.method;
recv_count++;
if (method->id == PJSIP_INVITE_METHOD) {
if (recv_count > 1) {
PJ_LOG(3,(THIS_FILE," error: not expecting %d-th packet!",
recv_count));
test_complete = -635;
}
status = pjsip_endpt_respond_stateless(endpt, rdata, 301, NULL,
NULL, NULL);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to send response", status);
test_complete = -636;
}
} else if (method->id == PJSIP_ACK_METHOD) {
if (recv_count == 2) {
pj_str_t key;
pj_time_val delay = { 5, 0 };
/* Schedule timer to destroy transaction after 5 seconds.
* This is to make sure that transaction does not
* retransmit ACK.
*/
pjsip_tsx_create_key(rdata->tp_info.pool, &key,
PJSIP_ROLE_UAC, &pjsip_invite_method,
rdata);
pj_strcpy(&timer.tsx_key, &key);
timer.entry.id = 301;
timer.entry.cb = &terminate_tsx_callback;
pjsip_endpt_schedule_timer(endpt, &timer.entry, &delay);
}
if (recv_count > 2) {
PJ_LOG(3,(THIS_FILE," error: not expecting %d-th packet!",
recv_count));
test_complete = -638;
}
} else {
PJ_LOG(3,(THIS_FILE," error: not expecting %s",
pjsip_rx_data_get_info(rdata)));
test_complete = -639;
}
} else
if (pj_strcmp2(&rdata->msg_info.via->branch_param, TEST9_BRANCH_ID) == 0) {
/*
* The TEST9_BRANCH_ID test failed INVITE transaction with
* provisional response.
*/
pjsip_method *method;
pj_status_t status;
method = &rdata->msg_info.msg->line.req.method;
recv_count++;
if (method->id == PJSIP_INVITE_METHOD) {
pjsip_response_addr res_addr;
struct response *r;
pjsip_tx_data *tdata;
pj_time_val delay = { 2, 0 };
if (recv_count > 1) {
PJ_LOG(3,(THIS_FILE," error: not expecting %d-th packet!",
recv_count));
test_complete = -650;
return PJ_TRUE;
}
/* Respond with provisional response */
status = pjsip_endpt_create_response(endpt, rdata, 100, NULL,
&tdata);
pj_assert(status == PJ_SUCCESS);
status = pjsip_get_response_addr(tdata->pool, rdata, &res_addr);
pj_assert(status == PJ_SUCCESS);
status = pjsip_endpt_send_response(endpt, &res_addr, tdata,
NULL, NULL);
pj_assert(status == PJ_SUCCESS);
/* Create the final response. */
status = pjsip_endpt_create_response(endpt, rdata, 302, NULL,
&tdata);
pj_assert(status == PJ_SUCCESS);
/* Schedule sending final response in couple of of secs. */
r = pj_pool_alloc(tdata->pool, sizeof(*r));
r->res_addr = res_addr;
r->tdata = tdata;
if (r->res_addr.transport)
pjsip_transport_add_ref(r->res_addr.transport);
timer.entry.cb = &send_response_callback;
timer.entry.user_data = r;
pjsip_endpt_schedule_timer(endpt, &timer.entry, &delay);
} else if (method->id == PJSIP_ACK_METHOD) {
if (recv_count == 2) {
pj_str_t key;
pj_time_val delay = { 5, 0 };
/* Schedule timer to destroy transaction after 5 seconds.
* This is to make sure that transaction does not
* retransmit ACK.
*/
pjsip_tsx_create_key(rdata->tp_info.pool, &key,
PJSIP_ROLE_UAC, &pjsip_invite_method,
rdata);
pj_strcpy(&timer.tsx_key, &key);
timer.entry.id = 302;
timer.entry.cb = &terminate_tsx_callback;
pjsip_endpt_schedule_timer(endpt, &timer.entry, &delay);
}
if (recv_count > 2) {
PJ_LOG(3,(THIS_FILE," error: not expecting %d-th packet!",
recv_count));
test_complete = -638;
}
} else {
PJ_LOG(3,(THIS_FILE," error: not expecting %s",
pjsip_rx_data_get_info(rdata)));
test_complete = -639;
}
return PJ_TRUE;
}
return PJ_FALSE;
}
/*
* Create stream based on the codec, dir, remote address, etc.
*/
static pj_status_t create_stream( pj_pool_t *pool,
pjmedia_endpt *med_endpt,
const pjmedia_vid_codec_info *codec_info,
pjmedia_vid_codec_param *codec_param,
pjmedia_dir dir,
pj_int8_t rx_pt,
pj_int8_t tx_pt,
pj_uint16_t local_port,
const pj_sockaddr_in *rem_addr,
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
pj_bool_t use_srtp,
const pj_str_t *crypto_suite,
const pj_str_t *srtp_tx_key,
const pj_str_t *srtp_rx_key,
#endif
pjmedia_vid_stream **p_stream )
{
pjmedia_vid_stream_info info;
pjmedia_transport *transport = NULL;
pj_status_t status;
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
pjmedia_transport *srtp_tp = NULL;
#endif
/* Reset stream info. */
pj_bzero(&info, sizeof(info));
/* Initialize stream info formats */
info.type = PJMEDIA_TYPE_VIDEO;
info.dir = dir;
info.codec_info = *codec_info;
info.tx_pt = (tx_pt == -1)? codec_info->pt : tx_pt;
info.rx_pt = (rx_pt == -1)? codec_info->pt : rx_pt;
info.ssrc = pj_rand();
if (codec_param)
info.codec_param = codec_param;
/* Copy remote address */
pj_memcpy(&info.rem_addr, rem_addr, sizeof(pj_sockaddr_in));
/* If remote address is not set, set to an arbitrary address
* (otherwise stream will assert).
*/
if (info.rem_addr.addr.sa_family == 0) {
const pj_str_t addr = pj_str("127.0.0.1");
pj_sockaddr_in_init(&info.rem_addr.ipv4, &addr, 0);
}
/* Create media transport */
status = pjmedia_transport_udp_create(med_endpt, NULL, local_port,
0, &transport);
if (status != PJ_SUCCESS)
return status;
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
/* Check if SRTP enabled */
if (use_srtp) {
pjmedia_srtp_crypto tx_plc, rx_plc;
status = pjmedia_transport_srtp_create(med_endpt, transport,
NULL, &srtp_tp);
if (status != PJ_SUCCESS)
return status;
pj_bzero(&tx_plc, sizeof(pjmedia_srtp_crypto));
pj_bzero(&rx_plc, sizeof(pjmedia_srtp_crypto));
tx_plc.key = *srtp_tx_key;
tx_plc.name = *crypto_suite;
rx_plc.key = *srtp_rx_key;
rx_plc.name = *crypto_suite;
status = pjmedia_transport_srtp_start(srtp_tp, &tx_plc, &rx_plc);
if (status != PJ_SUCCESS)
return status;
transport = srtp_tp;
}
#endif
/* Now that the stream info is initialized, we can create the
* stream.
*/
status = pjmedia_vid_stream_create( med_endpt, pool, &info,
transport,
NULL, p_stream);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Error creating stream", status);
pjmedia_transport_close(transport);
return status;
}
return PJ_SUCCESS;
}
static int test_timer_heap(void)
{
int i, j;
pj_timer_entry *entry;
pj_pool_t *pool;
pj_timer_heap_t *timer;
pj_time_val delay;
pj_status_t rc; int err=0;
pj_size_t size;
unsigned count;
size = pj_timer_heap_mem_size(MAX_COUNT)+MAX_COUNT*sizeof(pj_timer_entry);
pool = pj_pool_create( mem, NULL, size, 4000, NULL);
if (!pool) {
PJ_LOG(3,("test", "...error: unable to create pool of %u bytes",
size));
return -10;
}
entry = (pj_timer_entry*)pj_pool_calloc(pool, MAX_COUNT, sizeof(*entry));
if (!entry)
return -20;
for (i=0; i<MAX_COUNT; ++i) {
entry[i].cb = &timer_callback;
}
rc = pj_timer_heap_create(pool, MAX_COUNT, &timer);
if (rc != PJ_SUCCESS) {
app_perror("...error: unable to create timer heap", rc);
return -30;
}
count = MIN_COUNT;
for (i=0; i<LOOP; ++i) {
int early = 0;
int done=0;
int cancelled=0;
int rc;
pj_timestamp t1, t2, t_sched, t_cancel, t_poll;
pj_time_val now, expire;
pj_gettimeofday(&now);
pj_srand(now.sec);
t_sched.u32.lo = t_cancel.u32.lo = t_poll.u32.lo = 0;
// Register timers
for (j=0; j<(int)count; ++j) {
delay.sec = pj_rand() % DELAY;
delay.msec = pj_rand() % 1000;
// Schedule timer
pj_get_timestamp(&t1);
rc = pj_timer_heap_schedule(timer, &entry[j], &delay);
if (rc != 0)
return -40;
pj_get_timestamp(&t2);
t_sched.u32.lo += (t2.u32.lo - t1.u32.lo);
// Poll timers.
pj_get_timestamp(&t1);
rc = pj_timer_heap_poll(timer, NULL);
pj_get_timestamp(&t2);
if (rc > 0) {
t_poll.u32.lo += (t2.u32.lo - t1.u32.lo);
early += rc;
}
}
// Set the time where all timers should finish
pj_gettimeofday(&expire);
delay.sec = DELAY;
delay.msec = 0;
PJ_TIME_VAL_ADD(expire, delay);
// Wait unfil all timers finish, cancel some of them.
do {
int index = pj_rand() % count;
pj_get_timestamp(&t1);
rc = pj_timer_heap_cancel(timer, &entry[index]);
pj_get_timestamp(&t2);
if (rc > 0) {
cancelled += rc;
t_cancel.u32.lo += (t2.u32.lo - t1.u32.lo);
}
pj_gettimeofday(&now);
pj_get_timestamp(&t1);
#if defined(PJ_SYMBIAN) && PJ_SYMBIAN!=0
/* On Symbian, we must use OS poll (Active Scheduler poll) since
* timer is implemented using Active Object.
*/
rc = 0;
while (pj_symbianos_poll(-1, 0))
++rc;
#else
rc = pj_timer_heap_poll(timer, NULL);
#endif
pj_get_timestamp(&t2);
if (rc > 0) {
done += rc;
t_poll.u32.lo += (t2.u32.lo - t1.u32.lo);
}
} while (PJ_TIME_VAL_LTE(now, expire)&&pj_timer_heap_count(timer) > 0);
if (pj_timer_heap_count(timer)) {
PJ_LOG(3, (THIS_FILE, "ERROR: %d timers left",
pj_timer_heap_count(timer)));
++err;
}
t_sched.u32.lo /= count;
t_cancel.u32.lo /= count;
t_poll.u32.lo /= count;
PJ_LOG(4, (THIS_FILE,
"...ok (count:%d, early:%d, cancelled:%d, "
"sched:%d, cancel:%d poll:%d)",
count, early, cancelled, t_sched.u32.lo, t_cancel.u32.lo,
t_poll.u32.lo));
count = count * 2;
if (count > MAX_COUNT)
break;
}
pj_pool_release(pool);
return err;
}
/* Double terminate test. */
static int double_terminate(void)
{
pj_str_t target, from, tsx_key;
pjsip_tx_data *tdata;
pjsip_transaction *tsx;
pj_status_t status;
PJ_LOG(3,(THIS_FILE, " double terminate test"));
target = pj_str(TARGET_URI);
from = pj_str(FROM_URI);
/* Create request. */
status = pjsip_endpt_create_request(endpt, &pjsip_invite_method, &target,
&from, &target, NULL, NULL, -1, NULL,
&tdata);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to create request", status);
return -10;
}
/* Create transaction. */
status = pjsip_tsx_create_uac(NULL, tdata, &tsx);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to create transaction", status);
return -20;
}
/* Save transaction key for later. */
pj_strdup_with_null(tdata->pool, &tsx_key, &tsx->transaction_key);
/* Add reference to transmit buffer (tsx_send_msg() will dec txdata). */
pjsip_tx_data_add_ref(tdata);
/* Send message to start timeout timer. */
status = pjsip_tsx_send_msg(tsx, NULL);
/* Terminate transaction. */
status = pjsip_tsx_terminate(tsx, PJSIP_SC_REQUEST_TERMINATED);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to terminate transaction", status);
return -30;
}
tsx = pjsip_tsx_layer_find_tsx(&tsx_key, PJ_TRUE);
if (tsx) {
/* Terminate transaction again. */
pjsip_tsx_terminate(tsx, PJSIP_SC_REQUEST_TERMINATED);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to terminate transaction", status);
return -40;
}
pj_mutex_unlock(tsx->mutex);
}
flush_events(500);
if (pjsip_tx_data_dec_ref(tdata) != PJSIP_EBUFDESTROYED) {
return -50;
}
return PJ_SUCCESS;
}
/* Application init */
static pj_status_t app_init()
{
unsigned i, count;
pj_status_t status;
/* Redirect log */
pj_log_set_log_func((void (*)(int,const char*,int)) &log_writer);
pj_log_set_decor(PJ_LOG_HAS_NEWLINE);
pj_log_set_level(3);
/* Init pjlib */
status = pj_init();
if (status != PJ_SUCCESS) {
app_perror("pj_init()", status);
return status;
}
pj_caching_pool_init(&cp, NULL, 0);
/* Init sound subsystem */
status = pjmedia_aud_subsys_init(&cp.factory);
if (status != PJ_SUCCESS) {
app_perror("pjmedia_snd_init()", status);
pj_caching_pool_destroy(&cp);
pj_shutdown();
return status;
}
count = pjmedia_aud_dev_count();
PJ_LOG(3,(THIS_FILE, "Device count: %d", count));
for (i=0; i<count; ++i) {
pjmedia_aud_dev_info info;
pj_status_t status;
status = pjmedia_aud_dev_get_info(i, &info);
pj_assert(status == PJ_SUCCESS);
PJ_LOG(3, (THIS_FILE, "%d: %s %d/%d %dHz",
i, info.name, info.input_count, info.output_count,
info.default_samples_per_sec));
unsigned j;
/* Print extended formats supported by this audio device */
PJ_LOG(3, (THIS_FILE, " Extended formats supported:"));
for (j = 0; j < info.ext_fmt_cnt; ++j) {
const char *fmt_name = NULL;
switch (info.ext_fmt[j].id) {
case PJMEDIA_FORMAT_PCMA:
fmt_name = "PCMA";
break;
case PJMEDIA_FORMAT_PCMU:
fmt_name = "PCMU";
break;
case PJMEDIA_FORMAT_AMR:
fmt_name = "AMR-NB";
break;
case PJMEDIA_FORMAT_G729:
fmt_name = "G729";
break;
case PJMEDIA_FORMAT_ILBC:
fmt_name = "ILBC";
break;
case PJMEDIA_FORMAT_PCM:
fmt_name = "PCM";
break;
default:
fmt_name = "Unknown";
break;
}
PJ_LOG(3, (THIS_FILE, " - %s", fmt_name));
}
}
/* Create pool */
pool = pj_pool_create(&cp.factory, THIS_FILE, 512, 512, NULL);
if (pool == NULL) {
app_perror("pj_pool_create()", status);
pj_caching_pool_destroy(&cp);
pj_shutdown();
return status;
}
/* Init delay buffer */
status = pjmedia_delay_buf_create(pool, THIS_FILE, CLOCK_RATE,
SAMPLES_PER_FRAME, CHANNEL_COUNT,
0, 0, &delaybuf);
if (status != PJ_SUCCESS) {
app_perror("pjmedia_delay_buf_create()", status);
//pj_caching_pool_destroy(&cp);
//pj_shutdown();
//return status;
}
return PJ_SUCCESS;
}
static int send_recv_test(pj_ioqueue_t *ioque,
pj_ioqueue_key_t *skey,
pj_ioqueue_key_t *ckey,
void *send_buf,
void *recv_buf,
pj_ssize_t bufsize,
pj_timestamp *t_elapsed)
{
pj_status_t status;
pj_ssize_t bytes;
pj_time_val timeout;
pj_timestamp t1, t2;
int pending_op = 0;
pj_ioqueue_op_key_t read_op, write_op;
// Start reading on the server side.
bytes = bufsize;
status = pj_ioqueue_recv(skey, &read_op, recv_buf, &bytes, 0);
if (status != PJ_SUCCESS && status != PJ_EPENDING) {
app_perror("...pj_ioqueue_recv error", status);
return -100;
}
if (status == PJ_EPENDING)
++pending_op;
else {
/* Does not expect to return error or immediate data. */
return -115;
}
// Randomize send buffer.
pj_create_random_string((char*)send_buf, bufsize);
// Starts send on the client side.
bytes = bufsize;
status = pj_ioqueue_send(ckey, &write_op, send_buf, &bytes, 0);
if (status != PJ_SUCCESS && bytes != PJ_EPENDING) {
return -120;
}
if (status == PJ_EPENDING) {
++pending_op;
}
// Begin time.
pj_get_timestamp(&t1);
// Reset indicators
callback_read_size = callback_write_size = 0;
callback_read_key = callback_write_key = NULL;
callback_read_op = callback_write_op = NULL;
// Poll the queue until we've got completion event in the server side.
status = 0;
while (pending_op > 0) {
timeout.sec = 1; timeout.msec = 0;
status = pj_ioqueue_poll(ioque, &timeout);
if (status > 0) {
if (callback_read_size) {
if (callback_read_size != bufsize)
return -160;
if (callback_read_key != skey)
return -161;
if (callback_read_op != &read_op)
return -162;
}
if (callback_write_size) {
if (callback_write_key != ckey)
return -163;
if (callback_write_op != &write_op)
return -164;
}
pending_op -= status;
}
if (status == 0) {
PJ_LOG(3,("", "...error: timed out"));
}
if (status < 0) {
return -170;
}
}
// Pending op is zero.
// Subsequent poll should yield zero too.
timeout.sec = timeout.msec = 0;
status = pj_ioqueue_poll(ioque, &timeout);
if (status != 0)
return -173;
// End time.
pj_get_timestamp(&t2);
t_elapsed->u32.lo += (t2.u32.lo - t1.u32.lo);
// Compare recv buffer with send buffer.
if (pj_memcmp(send_buf, recv_buf, bufsize) != 0) {
return -180;
}
// Success
return 0;
}
/*
* Compliance test for failed scenario.
* In this case, the client connects to a non-existant service.
*/
static int compliance_test_1(void)
{
pj_sock_t csock1=-1;
pj_sockaddr_in addr;
pj_pool_t *pool = NULL;
pj_ioqueue_t *ioque = NULL;
pj_ioqueue_key_t *ckey1;
pj_ssize_t status = -1;
int pending_op = 0;
pj_str_t s;
pj_status_t rc;
// Create pool.
pool = pj_pool_create(mem, NULL, POOL_SIZE, 4000, NULL);
// Create I/O Queue.
rc = pj_ioqueue_create(pool, PJ_IOQUEUE_MAX_HANDLES, &ioque);
if (!ioque) {
status=-20; goto on_error;
}
// Create client socket
rc = pj_sock_socket(PJ_AF_INET, PJ_SOCK_STREAM, 0, &csock1);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_sock_socket()", rc);
status=-1; goto on_error;
}
// Register client socket.
rc = pj_ioqueue_register_sock(pool, ioque, csock1, NULL,
&test_cb, &ckey1);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_ioqueue_register_sock()", rc);
status=-23; goto on_error;
}
// Initialize remote address.
pj_sockaddr_in_init(&addr, pj_cstr(&s, "127.0.0.1"), NON_EXISTANT_PORT);
// Client socket connect()
status = pj_ioqueue_connect(ckey1, &addr, sizeof(addr));
if (status==PJ_SUCCESS) {
// unexpectedly success!
status = -30;
goto on_error;
}
if (status != PJ_EPENDING) {
// success
} else {
++pending_op;
}
callback_connect_status = -2;
callback_connect_key = NULL;
// Poll until we've got result
while (pending_op) {
pj_time_val timeout = {1, 0};
status=pj_ioqueue_poll(ioque, &timeout);
if (status > 0) {
if (callback_connect_key==ckey1) {
if (callback_connect_status == 0) {
// unexpectedly connected!
status = -50;
goto on_error;
}
}
if (status > pending_op) {
PJ_LOG(3,(THIS_FILE,
"...error: pj_ioqueue_poll() returned %d "
"(only expecting %d)",
status, pending_op));
return -552;
}
pending_op -= status;
if (pending_op == 0) {
status = 0;
}
}
}
// There's no pending operation.
// When we poll the ioqueue, there must not be events.
if (pending_op == 0) {
pj_time_val timeout = {1, 0};
status = pj_ioqueue_poll(ioque, &timeout);
if (status != 0) {
status=-60; goto on_error;
}
}
// Success
status = 0;
on_error:
if (csock1 != PJ_INVALID_SOCKET)
pj_sock_close(csock1);
if (ioque != NULL)
pj_ioqueue_destroy(ioque);
pj_pool_release(pool);
return status;
}
/*
* Display VU meter
*/
static void monitor_level(pjmedia_conf *conf, int slot, int dir, int dur)
{
enum { SLEEP = 20, SAMP_CNT = 2};
pj_status_t status;
int i, total_count;
unsigned level, samp_cnt;
puts("");
printf("Displaying VU meter for port %d for about %d seconds\n",
slot, dur);
total_count = dur * 1000 / SLEEP;
level = 0;
samp_cnt = 0;
for (i=0; i<total_count; ++i) {
unsigned tx_level, rx_level;
int j, length;
char meter[21];
/* Poll the volume every 20 msec */
status = pjmedia_conf_get_signal_level(conf, slot,
&tx_level, &rx_level);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to read level", status);
return;
}
level += (dir=='r' ? rx_level : tx_level);
++samp_cnt;
/* Accumulate until we have enough samples */
if (samp_cnt < SAMP_CNT) {
pj_thread_sleep(SLEEP);
continue;
}
/* Get average */
level = level / samp_cnt;
/* Draw bar */
length = 20 * level / 255;
for (j=0; j<length; ++j)
meter[j] = '#';
for (; j<20; ++j)
meter[j] = ' ';
meter[20] = '\0';
printf("Port #%02d %cx level: [%s] %d \r",
slot, dir, meter, level);
/* Next.. */
samp_cnt = 0;
level = 0;
pj_thread_sleep(SLEEP);
}
puts("");
}
/* Test with recursive mutex. */
static int recursive_mutex_test(pj_pool_t *pool)
{
pj_status_t rc;
pj_mutex_t *mutex;
PJ_LOG(3,("", "...testing recursive mutex"));
/* Create mutex. */
TRACE_(("", "....create mutex"));
rc = pj_mutex_create( pool, "", PJ_MUTEX_RECURSE, &mutex);
if (rc != PJ_SUCCESS) {
app_perror("...error: pj_mutex_create", rc);
return -10;
}
/* Normal lock/unlock cycle. */
TRACE_(("", "....lock mutex"));
rc = pj_mutex_lock(mutex);
if (rc != PJ_SUCCESS) {
app_perror("...error: pj_mutex_lock", rc);
return -20;
}
TRACE_(("", "....unlock mutex"));
rc = pj_mutex_unlock(mutex);
if (rc != PJ_SUCCESS) {
app_perror("...error: pj_mutex_unlock", rc);
return -30;
}
/* Lock again. */
TRACE_(("", "....lock mutex"));
rc = pj_mutex_lock(mutex);
if (rc != PJ_SUCCESS) return -40;
/* Try-lock should NOT fail. . */
TRACE_(("", "....trylock mutex"));
rc = pj_mutex_trylock(mutex);
if (rc != PJ_SUCCESS) {
app_perror("...error: recursive mutex is not recursive!", rc);
return -40;
}
/* Locking again should not fail. */
TRACE_(("", "....lock mutex"));
rc = pj_mutex_lock(mutex);
if (rc != PJ_SUCCESS) {
app_perror("...error: recursive mutex is not recursive!", rc);
return -45;
}
/* Unlock several times and done. */
TRACE_(("", "....unlock mutex 3x"));
rc = pj_mutex_unlock(mutex);
if (rc != PJ_SUCCESS) return -50;
rc = pj_mutex_unlock(mutex);
if (rc != PJ_SUCCESS) return -51;
rc = pj_mutex_unlock(mutex);
if (rc != PJ_SUCCESS) return -52;
TRACE_(("", "....destroy mutex"));
rc = pj_mutex_destroy(mutex);
if (rc != PJ_SUCCESS) return -60;
TRACE_(("", "....done"));
return PJ_SUCCESS;
}
static void show_dev_info(unsigned index)
{
#define H "%-20s"
pjmedia_aud_dev_info info;
char formats[200];
pj_status_t status;
if (index >= dev_count) {
PJ_LOG(1,(THIS_FILE, "Error: invalid index %u", index));
return;
}
status = pjmedia_aud_dev_get_info(index, &info);
if (status != PJ_SUCCESS) {
app_perror("pjmedia_aud_dev_get_info() error", status);
return;
}
PJ_LOG(3, (THIS_FILE, "Device at index %u:", index));
PJ_LOG(3, (THIS_FILE, "-------------------------"));
PJ_LOG(3, (THIS_FILE, H": %u (0x%x)", "ID", index, index));
PJ_LOG(3, (THIS_FILE, H": %s", "Name", info.name));
PJ_LOG(3, (THIS_FILE, H": %s", "Driver", info.driver));
PJ_LOG(3, (THIS_FILE, H": %u", "Input channels", info.input_count));
PJ_LOG(3, (THIS_FILE, H": %u", "Output channels", info.output_count));
PJ_LOG(3, (THIS_FILE, H": %s", "Capabilities", decode_caps(info.caps)));
formats[0] = '\0';
if (info.caps & PJMEDIA_AUD_DEV_CAP_EXT_FORMAT) {
unsigned i;
for (i=0; i<info.ext_fmt_cnt; ++i) {
char bitrate[32];
switch (info.ext_fmt[i].id) {
case PJMEDIA_FORMAT_L16:
strcat(formats, "L16/");
break;
case PJMEDIA_FORMAT_PCMA:
strcat(formats, "PCMA/");
break;
case PJMEDIA_FORMAT_PCMU:
strcat(formats, "PCMU/");
break;
case PJMEDIA_FORMAT_AMR:
strcat(formats, "AMR/");
break;
case PJMEDIA_FORMAT_G729:
strcat(formats, "G729/");
break;
case PJMEDIA_FORMAT_ILBC:
strcat(formats, "ILBC/");
break;
default:
strcat(formats, "unknown/");
break;
}
sprintf(bitrate, "%u", info.ext_fmt[i].det.aud.avg_bps);
strcat(formats, bitrate);
strcat(formats, " ");
}
}
PJ_LOG(3, (THIS_FILE, H": %s", "Extended formats", formats));
#undef H
}
/*****************************************************************************
* main()
*/
int main(int argc, char *argv[])
{
int dev_id = -1;
int clock_rate = CLOCK_RATE;
int channel_count = NCHANNELS;
int samples_per_frame = NSAMPLES;
int bits_per_sample = NBITS;
pj_caching_pool cp;
pjmedia_endpt *med_endpt;
pj_pool_t *pool;
pjmedia_conf *conf;
int i, port_count, file_count;
pjmedia_port **file_port; /* Array of file ports */
pjmedia_port *rec_port = NULL; /* Wav writer port */
char tmp[10];
pj_status_t status;
/* Must init PJLIB first: */
status = pj_init();
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Get command line options. */
if (get_snd_options(THIS_FILE, argc, argv, &dev_id, &clock_rate,
&channel_count, &samples_per_frame, &bits_per_sample))
{
usage();
return 1;
}
/* Must create a pool factory before we can allocate any memory. */
pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
/*
* Initialize media endpoint.
* This will implicitly initialize PJMEDIA too.
*/
status = pjmedia_endpt_create(&cp.factory, NULL, 1, &med_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Create memory pool to allocate memory */
pool = pj_pool_create( &cp.factory, /* pool factory */
"wav", /* pool name. */
4000, /* init size */
4000, /* increment size */
NULL /* callback on error */
);
file_count = argc - pj_optind;
port_count = file_count + 1 + RECORDER;
/* Create the conference bridge.
* With default options (zero), the bridge will create an instance of
* sound capture and playback device and connect them to slot zero.
*/
status = pjmedia_conf_create( pool, /* pool to use */
port_count,/* number of ports */
clock_rate,
channel_count,
samples_per_frame,
bits_per_sample,
0, /* options */
&conf /* result */
);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create conference bridge", status);
return 1;
}
#if RECORDER
status = pjmedia_wav_writer_port_create( pool, "confrecord.wav",
clock_rate, channel_count,
samples_per_frame,
bits_per_sample, 0, 0,
&rec_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create WAV writer", status);
return 1;
}
pjmedia_conf_add_port(conf, pool, rec_port, NULL, NULL);
#endif
/* Create file ports. */
file_port = pj_pool_alloc(pool, file_count * sizeof(pjmedia_port*));
for (i=0; i<file_count; ++i) {
/* Load the WAV file to file port. */
status = pjmedia_wav_player_port_create(
pool, /* pool. */
argv[i+pj_optind], /* filename */
0, /* use default ptime */
0, /* flags */
0, /* buf size */
&file_port[i] /* result */
);
if (status != PJ_SUCCESS) {
char title[80];
pj_ansi_sprintf(title, "Unable to use %s", argv[i+pj_optind]);
app_perror(THIS_FILE, title, status);
usage();
return 1;
}
/* Add the file port to conference bridge */
status = pjmedia_conf_add_port( conf, /* The bridge */
pool, /* pool */
file_port[i], /* port to connect */
NULL, /* Use port's name */
NULL /* ptr for slot # */
);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to add conference port", status);
return 1;
}
}
/*
* All ports are set up in the conference bridge.
* But at this point, no media will be flowing since no ports are
* "connected". User must connect the port manually.
*/
/* Dump memory usage */
dump_pool_usage(THIS_FILE, &cp);
/* Sleep to allow log messages to flush */
pj_thread_sleep(100);
/*
* UI Menu:
*/
for (;;) {
char tmp1[10];
char tmp2[10];
char *err;
int src, dst, level, dur;
puts("");
conf_list(conf, 0);
puts("");
puts("Menu:");
puts(" s Show ports details");
puts(" c Connect one port to another");
puts(" d Disconnect port connection");
puts(" t Adjust signal level transmitted (tx) to a port");
puts(" r Adjust signal level received (rx) from a port");
puts(" v Display VU meter for a particular port");
puts(" q Quit");
puts("");
printf("Enter selection: "); fflush(stdout);
if (fgets(tmp, sizeof(tmp), stdin) == NULL)
break;
switch (tmp[0]) {
case 's':
puts("");
conf_list(conf, 1);
break;
case 'c':
puts("");
puts("Connect source port to destination port");
if (!input("Enter source port number", tmp1, sizeof(tmp1)) )
continue;
src = strtol(tmp1, &err, 10);
if (*err || src < 0 || src >= port_count) {
puts("Invalid slot number");
continue;
}
if (!input("Enter destination port number", tmp2, sizeof(tmp2)) )
continue;
dst = strtol(tmp2, &err, 10);
if (*err || dst < 0 || dst >= port_count) {
puts("Invalid slot number");
continue;
}
status = pjmedia_conf_connect_port(conf, src, dst, 0);
if (status != PJ_SUCCESS)
app_perror(THIS_FILE, "Error connecting port", status);
break;
case 'd':
puts("");
puts("Disconnect port connection");
if (!input("Enter source port number", tmp1, sizeof(tmp1)) )
continue;
src = strtol(tmp1, &err, 10);
if (*err || src < 0 || src >= port_count) {
puts("Invalid slot number");
continue;
}
if (!input("Enter destination port number", tmp2, sizeof(tmp2)) )
continue;
dst = strtol(tmp2, &err, 10);
if (*err || dst < 0 || dst >= port_count) {
puts("Invalid slot number");
continue;
}
status = pjmedia_conf_disconnect_port(conf, src, dst);
if (status != PJ_SUCCESS)
app_perror(THIS_FILE, "Error connecting port", status);
break;
case 't':
puts("");
puts("Adjust transmit level of a port");
if (!input("Enter port number", tmp1, sizeof(tmp1)) )
continue;
src = strtol(tmp1, &err, 10);
if (*err || src < 0 || src >= port_count) {
puts("Invalid slot number");
continue;
}
if (!input("Enter level (-128 to >127, 0 for normal)",
tmp2, sizeof(tmp2)) )
continue;
level = strtol(tmp2, &err, 10);
if (*err || level < -128) {
puts("Invalid level");
continue;
}
status = pjmedia_conf_adjust_tx_level( conf, src, level);
if (status != PJ_SUCCESS)
app_perror(THIS_FILE, "Error adjusting level", status);
break;
case 'r':
puts("");
puts("Adjust receive level of a port");
if (!input("Enter port number", tmp1, sizeof(tmp1)) )
continue;
src = strtol(tmp1, &err, 10);
if (*err || src < 0 || src >= port_count) {
puts("Invalid slot number");
continue;
}
if (!input("Enter level (-128 to >127, 0 for normal)",
tmp2, sizeof(tmp2)) )
continue;
level = strtol(tmp2, &err, 10);
if (*err || level < -128) {
puts("Invalid level");
continue;
}
status = pjmedia_conf_adjust_rx_level( conf, src, level);
if (status != PJ_SUCCESS)
app_perror(THIS_FILE, "Error adjusting level", status);
break;
case 'v':
puts("");
puts("Display VU meter");
if (!input("Enter port number to monitor", tmp1, sizeof(tmp1)) )
continue;
src = strtol(tmp1, &err, 10);
if (*err || src < 0 || src >= port_count) {
puts("Invalid slot number");
continue;
}
if (!input("Enter r for rx level or t for tx level", tmp2, sizeof(tmp2)))
continue;
if (tmp2[0] != 'r' && tmp2[0] != 't') {
puts("Invalid option");
continue;
}
if (!input("Duration to monitor (in seconds)", tmp1, sizeof(tmp1)) )
continue;
dur = strtol(tmp1, &err, 10);
if (*err) {
puts("Invalid duration number");
continue;
}
monitor_level(conf, src, tmp2[0], dur);
break;
case 'q':
goto on_quit;
default:
printf("Invalid input character '%c'\n", tmp[0]);
break;
}
}
on_quit:
/* Start deinitialization: */
/* Destroy conference bridge */
status = pjmedia_conf_destroy( conf );
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Destroy file ports */
for (i=0; i<file_count; ++i) {
status = pjmedia_port_destroy( file_port[i]);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
}
/* Destroy recorder port */
if (rec_port)
pjmedia_port_destroy(rec_port);
/* Release application pool */
pj_pool_release( pool );
/* Destroy media endpoint. */
pjmedia_endpt_destroy( med_endpt );
/* Destroy pool factory */
pj_caching_pool_destroy( &cp );
/* Shutdown PJLIB */
pj_shutdown();
/* Done. */
return 0;
}
int main()
{
pj_caching_pool cp;
pj_bool_t done = PJ_FALSE;
pj_status_t status;
/* Init pjlib */
status = pj_init();
PJ_ASSERT_RETURN(status==PJ_SUCCESS, 1);
pj_log_set_decor(PJ_LOG_HAS_NEWLINE);
/* Must create a pool factory before we can allocate any memory. */
pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
status = pjmedia_aud_subsys_init(&cp.factory);
if (status != PJ_SUCCESS) {
app_perror("pjmedia_aud_subsys_init()", status);
pj_caching_pool_destroy(&cp);
pj_shutdown();
return 1;
}
list_devices();
while (!done) {
char line[80];
print_menu();
if (fgets(line, sizeof(line), stdin)==NULL)
break;
switch (line[0]) {
case 'l':
list_devices();
break;
case 'R':
pjmedia_aud_dev_refresh();
puts("Audio device list refreshed.");
break;
case 'i':
{
unsigned dev_index;
if (sscanf(line+2, "%u", &dev_index) != 1) {
puts("error: device ID required");
break;
}
show_dev_info(dev_index);
}
break;
case 't':
{
pjmedia_dir dir;
int rec_id, play_id;
unsigned clock_rate, ptime, chnum;
int cnt;
cnt = sscanf(line+2, "%d %d %u %u %u", &rec_id, &play_id,
&clock_rate, &ptime, &chnum);
if (cnt < 4) {
puts("error: not enough parameters");
break;
}
if (clock_rate < 8000 || clock_rate > 128000) {
puts("error: invalid clock rate");
break;
}
if (ptime < 10 || ptime > 500) {
puts("error: invalid ptime");
break;
}
if (cnt==5) {
if (chnum < 1 || chnum > 4) {
puts("error: invalid number of channels");
break;
}
} else {
chnum = 1;
}
if (rec_id >= 0 && rec_id < (int)dev_count) {
if (play_id >= 0 && play_id < (int)dev_count)
dir = PJMEDIA_DIR_CAPTURE_PLAYBACK;
else
dir = PJMEDIA_DIR_CAPTURE;
} else if (play_id >= 0 && play_id < (int)dev_count) {
dir = PJMEDIA_DIR_PLAYBACK;
} else {
puts("error: at least one valid device index required");
break;
}
test_device(dir, rec_id, play_id, clock_rate, ptime, chnum);
}
break;
case 'r':
/* record */
{
int index;
char filename[80];
int count;
count = sscanf(line+2, "%d %s", &index, filename);
if (count==1)
record(index, NULL);
else if (count==2)
record(index, filename);
else
puts("error: invalid command syntax");
}
break;
case 'p':
/* playback */
{
int index;
char filename[80];
int count;
count = sscanf(line+2, "%d %s", &index, filename);
if (count==1)
play_file(index, NULL);
else if (count==2)
play_file(index, filename);
else
puts("error: invalid command syntax");
}
break;
case 'd':
/* latencies */
{
int rec_lat, play_lat;
if (sscanf(line+2, "%d %d", &rec_lat, &play_lat) == 2) {
capture_lat = (unsigned)
(rec_lat>=0? rec_lat:PJMEDIA_SND_DEFAULT_REC_LATENCY);
playback_lat = (unsigned)
(play_lat >= 0? play_lat : PJMEDIA_SND_DEFAULT_PLAY_LATENCY);
printf("Recording latency=%ums, playback latency=%ums",
capture_lat, playback_lat);
} else {
printf("Current latencies: record=%ums, playback=%ums",
capture_lat, playback_lat);
}
puts("");
}
break;
case 'v':
if (pj_log_get_level() <= 3) {
pj_log_set_level(5);
puts("Logging set to detail");
} else {
pj_log_set_level(3);
puts("Logging set to quiet");
}
break;
case 'q':
done = PJ_TRUE;
break;
}
}
pj_caching_pool_destroy(&cp);
pj_shutdown();
return 0;
}
static void test_device(pjmedia_dir dir, unsigned rec_id, unsigned play_id,
unsigned clock_rate, unsigned ptime,
unsigned chnum)
{
pjmedia_aud_param param;
pjmedia_aud_test_results result;
pj_status_t status;
if (dir & PJMEDIA_DIR_CAPTURE) {
status = pjmedia_aud_dev_default_param(rec_id, ¶m);
} else {
status = pjmedia_aud_dev_default_param(play_id, ¶m);
}
if (status != PJ_SUCCESS) {
app_perror("pjmedia_aud_dev_default_param()", status);
return;
}
param.dir = dir;
param.rec_id = rec_id;
param.play_id = play_id;
param.clock_rate = clock_rate;
param.channel_count = chnum;
param.samples_per_frame = clock_rate * chnum * ptime / 1000;
/* Latency settings */
param.flags |= (PJMEDIA_AUD_DEV_CAP_INPUT_LATENCY |
PJMEDIA_AUD_DEV_CAP_OUTPUT_LATENCY);
param.input_latency_ms = capture_lat;
param.output_latency_ms = playback_lat;
PJ_LOG(3,(THIS_FILE, "Performing test.."));
status = pjmedia_aud_test(¶m, &result);
if (status != PJ_SUCCESS) {
app_perror("Test has completed with error", status);
return;
}
PJ_LOG(3,(THIS_FILE, "Done. Result:"));
if (dir & PJMEDIA_DIR_CAPTURE) {
if (result.rec.frame_cnt==0) {
PJ_LOG(1,(THIS_FILE, "Error: no frames captured!"));
} else {
PJ_LOG(3,(THIS_FILE, " %-20s: interval (min/max/avg/dev)=%u/%u/%u/%u, burst=%u",
"Recording result",
result.rec.min_interval,
result.rec.max_interval,
result.rec.avg_interval,
result.rec.dev_interval,
result.rec.max_burst));
}
}
if (dir & PJMEDIA_DIR_PLAYBACK) {
if (result.play.frame_cnt==0) {
PJ_LOG(1,(THIS_FILE, "Error: no playback!"));
} else {
PJ_LOG(3,(THIS_FILE, " %-20s: interval (min/max/avg/dev)=%u/%u/%u/%u, burst=%u",
"Playback result",
result.play.min_interval,
result.play.max_interval,
result.play.avg_interval,
result.play.dev_interval,
result.play.max_burst));
}
}
if (dir==PJMEDIA_DIR_CAPTURE_PLAYBACK) {
if (result.rec_drift_per_sec == 0) {
PJ_LOG(3,(THIS_FILE, " No clock drift detected"));
} else {
const char *which = result.rec_drift_per_sec>=0 ? "faster" : "slower";
unsigned drift = result.rec_drift_per_sec>=0 ?
result.rec_drift_per_sec :
-result.rec_drift_per_sec;
PJ_LOG(3,(THIS_FILE, " Clock drifts detected. Capture device "
"is running %d samples per second %s "
"than the playback device",
drift, which));
}
}
}
/*
* The generic test framework, used by most of the tests.
*/
static int perform_tsx_test(int dummy, char *target_uri, char *from_uri,
char *branch_param, int test_time,
const pjsip_method *method)
{
pjsip_tx_data *tdata;
pjsip_transaction *tsx;
pj_str_t target, from, tsx_key;
pjsip_via_hdr *via;
pj_time_val timeout;
pj_status_t status;
PJ_LOG(3,(THIS_FILE,
" please standby, this will take at most %d seconds..",
test_time));
/* Reset test. */
recv_count = 0;
test_complete = 0;
/* Init headers. */
target = pj_str(target_uri);
from = pj_str(from_uri);
/* Create request. */
status = pjsip_endpt_create_request( endpt, method, &target,
&from, &target, NULL, NULL, -1,
NULL, &tdata);
if (status != PJ_SUCCESS) {
app_perror(" Error: unable to create request", status);
return -100;
}
/* Set the branch param for test 1. */
via = pjsip_msg_find_hdr(tdata->msg, PJSIP_H_VIA, NULL);
via->branch_param = pj_str(branch_param);
/* Add additional reference to tdata to prevent transaction from
* deleting it.
*/
pjsip_tx_data_add_ref(tdata);
/* Create transaction. */
status = pjsip_tsx_create_uac( &tsx_user, tdata, &tsx);
if (status != PJ_SUCCESS) {
app_perror(" Error: unable to create UAC transaction", status);
pjsip_tx_data_dec_ref(tdata);
return -110;
}
/* Get transaction key. */
pj_strdup(tdata->pool, &tsx_key, &tsx->transaction_key);
/* Send the message. */
status = pjsip_tsx_send_msg(tsx, NULL);
// Ignore send result. Some tests do deliberately triggers error
// when sending message.
if (status != PJ_SUCCESS) {
// app_perror(" Error: unable to send request", status);
pjsip_tx_data_dec_ref(tdata);
// return -120;
}
/* Set test completion time. */
pj_gettimeofday(&timeout);
timeout.sec += test_time;
/* Wait until test complete. */
while (!test_complete) {
pj_time_val now, poll_delay = {0, 10};
pjsip_endpt_handle_events(endpt, &poll_delay);
pj_gettimeofday(&now);
if (now.sec > timeout.sec) {
PJ_LOG(3,(THIS_FILE, " Error: test has timed out"));
pjsip_tx_data_dec_ref(tdata);
return -130;
}
}
if (test_complete < 0) {
tsx = pjsip_tsx_layer_find_tsx(&tsx_key, PJ_TRUE);
if (tsx) {
pjsip_tsx_terminate(tsx, PJSIP_SC_REQUEST_TERMINATED);
pj_mutex_unlock(tsx->mutex);
flush_events(1000);
}
pjsip_tx_data_dec_ref(tdata);
return test_complete;
} else {
pj_time_val now;
/* Allow transaction to destroy itself */
flush_events(500);
/* Wait until test completes */
pj_gettimeofday(&now);
if (PJ_TIME_VAL_LT(now, timeout)) {
pj_time_val interval;
interval = timeout;
PJ_TIME_VAL_SUB(interval, now);
flush_events(PJ_TIME_VAL_MSEC(interval));
}
}
/* Make sure transaction has been destroyed. */
if (pjsip_tsx_layer_find_tsx(&tsx_key, PJ_FALSE) != NULL) {
PJ_LOG(3,(THIS_FILE, " Error: transaction has not been destroyed"));
pjsip_tx_data_dec_ref(tdata);
return -140;
}
/* Check tdata reference counter. */
if (pj_atomic_get(tdata->ref_cnt) != 1) {
PJ_LOG(3,(THIS_FILE, " Error: tdata reference counter is %d",
pj_atomic_get(tdata->ref_cnt)));
pjsip_tx_data_dec_ref(tdata);
return -150;
}
/* Destroy txdata */
pjsip_tx_data_dec_ref(tdata);
return PJ_SUCCESS;
}
static int uas_tsx_bench(unsigned working_set, pj_timestamp *p_elapsed)
{
unsigned i;
pjsip_tx_data *request;
pjsip_via_hdr *via;
pjsip_rx_data rdata;
pj_sockaddr_in remote;
pjsip_transaction **tsx;
pj_timestamp t1, t2, elapsed;
char branch_buf[80] = PJSIP_RFC3261_BRANCH_ID "0000000000";
pj_status_t status;
/* Create the request first. */
pj_str_t str_target = pj_str("sip:[email protected]");
pj_str_t str_from = pj_str("\"Local User\" <sip:[email protected]>");
pj_str_t str_to = pj_str("\"Remote User\" <sip:[email protected]>");
pj_str_t str_contact = str_from;
status = pjsip_endpt_create_request(endpt, &pjsip_invite_method,
&str_target, &str_from, &str_to,
&str_contact, NULL, -1, NULL,
&request);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to create request", status);
return status;
}
/* Create Via */
via = pjsip_via_hdr_create(request->pool);
via->sent_by.host = pj_str("192.168.0.7");
via->sent_by.port = 5061;
via->transport = pj_str("udp");
via->rport_param = 1;
via->recvd_param = pj_str("192.168.0.7");
pjsip_msg_insert_first_hdr(request->msg, (pjsip_hdr*)via);
/* Create "dummy" rdata from the tdata */
pj_bzero(&rdata, sizeof(pjsip_rx_data));
rdata.tp_info.pool = request->pool;
rdata.msg_info.msg = request->msg;
rdata.msg_info.from = (pjsip_from_hdr*) pjsip_msg_find_hdr(request->msg, PJSIP_H_FROM, NULL);
rdata.msg_info.to = (pjsip_to_hdr*) pjsip_msg_find_hdr(request->msg, PJSIP_H_TO, NULL);
rdata.msg_info.cseq = (pjsip_cseq_hdr*) pjsip_msg_find_hdr(request->msg, PJSIP_H_CSEQ, NULL);
rdata.msg_info.cid = (pjsip_cid_hdr*) pjsip_msg_find_hdr(request->msg, PJSIP_H_FROM, NULL);
rdata.msg_info.via = via;
pj_sockaddr_in_init(&remote, 0, 0);
status = pjsip_endpt_acquire_transport(endpt, PJSIP_TRANSPORT_LOOP_DGRAM,
&remote, sizeof(pj_sockaddr_in),
NULL, &rdata.tp_info.transport);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to get loop transport", status);
return status;
}
/* Create transaction array */
tsx = (pjsip_transaction**) pj_pool_zalloc(request->pool, working_set * sizeof(pj_pool_t*));
pj_bzero(&mod_tsx_user, sizeof(mod_tsx_user));
mod_tsx_user.id = -1;
/* Benchmark */
elapsed.u64 = 0;
pj_get_timestamp(&t1);
for (i=0; i<working_set; ++i) {
via->branch_param.ptr = branch_buf;
via->branch_param.slen = PJSIP_RFC3261_BRANCH_LEN +
pj_ansi_sprintf(branch_buf+PJSIP_RFC3261_BRANCH_LEN,
"-%d", i);
status = pjsip_tsx_create_uas(&mod_tsx_user, &rdata, &tsx[i]);
if (status != PJ_SUCCESS)
goto on_error;
}
pj_get_timestamp(&t2);
pj_sub_timestamp(&t2, &t1);
pj_add_timestamp(&elapsed, &t2);
p_elapsed->u64 = elapsed.u64;
status = PJ_SUCCESS;
on_error:
for (i=0; i<working_set; ++i) {
if (tsx[i]) {
pjsip_tsx_terminate(tsx[i], 601);
tsx[i] = NULL;
}
}
pjsip_tx_data_dec_ref(request);
flush_events(2000);
return status;
}
/*
* main()
*
* If called with argument, treat argument as SIP URL to be called.
* Otherwise wait for incoming calls.
*/
int main(int argc, char *argv[])
{
pj_pool_t *pool = NULL;
pj_status_t status;
unsigned i;
/* Must init PJLIB first: */
status = pj_init();
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
pj_log_set_level(5);
/* Then init PJLIB-UTIL: */
status = pjlib_util_init();
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Must create a pool factory before we can allocate any memory. */
pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
/* Create global endpoint: */
{
const pj_str_t *hostname;
const char *endpt_name;
/* Endpoint MUST be assigned a globally unique name.
* The name will be used as the hostname in Warning header.
*/
/* For this implementation, we'll use hostname for simplicity */
hostname = pj_gethostname();
endpt_name = hostname->ptr;
/* Create the endpoint: */
status = pjsip_endpt_create(&cp.factory, endpt_name,
&g_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
}
/*
* Add UDP transport, with hard-coded port
* Alternatively, application can use pjsip_udp_transport_attach() to
* start UDP transport, if it already has an UDP socket (e.g. after it
* resolves the address with STUN).
*/
{
pj_sockaddr addr;
pj_sockaddr_init(AF, &addr, NULL, (pj_uint16_t)SIP_PORT);
if (AF == pj_AF_INET()) {
status = pjsip_udp_transport_start( g_endpt, &addr.ipv4, NULL,
1, NULL);
} else if (AF == pj_AF_INET6()) {
status = pjsip_udp_transport_start6(g_endpt, &addr.ipv6, NULL,
1, NULL);
} else {
status = PJ_EAFNOTSUP;
}
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to start UDP transport", status);
return 1;
}
}
/*
* Init transaction layer.
* This will create/initialize transaction hash tables etc.
*/
status = pjsip_tsx_layer_init_module(g_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/*
* Initialize UA layer module.
* This will create/initialize dialog hash tables etc.
*/
status = pjsip_ua_init_module( g_endpt, NULL );
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/*
* Init invite session module.
* The invite session module initialization takes additional argument,
* i.e. a structure containing callbacks to be called on specific
* occurence of events.
*
* The on_state_changed and on_new_session callbacks are mandatory.
* Application must supply the callback function.
*
* We use on_media_update() callback in this application to start
* media transmission.
*/
{
pjsip_inv_callback inv_cb;
/* Init the callback for INVITE session: */
pj_bzero(&inv_cb, sizeof(inv_cb));
inv_cb.on_state_changed = &call_on_state_changed;
inv_cb.on_new_session = &call_on_forked;
inv_cb.on_media_update = &call_on_media_update;
/* Initialize invite session module: */
status = pjsip_inv_usage_init(g_endpt, &inv_cb);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
}
/* Initialize 100rel support */
status = pjsip_100rel_init_module(g_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, status);
/*
* Register our module to receive incoming requests.
*/
status = pjsip_endpt_register_module( g_endpt, &mod_simpleua);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/*
* Register message logger module.
*/
status = pjsip_endpt_register_module( g_endpt, &msg_logger);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/*
* Initialize media endpoint.
* This will implicitly initialize PJMEDIA too.
*/
#if PJ_HAS_THREADS
status = pjmedia_endpt_create(&cp.factory, NULL, 1, &g_med_endpt);
#else
status = pjmedia_endpt_create(&cp.factory,
pjsip_endpt_get_ioqueue(g_endpt),
0, &g_med_endpt);
#endif
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/*
* Add PCMA/PCMU codec to the media endpoint.
*/
#if defined(PJMEDIA_HAS_G711_CODEC) && PJMEDIA_HAS_G711_CODEC!=0
status = pjmedia_codec_g711_init(g_med_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
#endif
#if defined(PJMEDIA_HAS_VIDEO) && (PJMEDIA_HAS_VIDEO != 0)
/* Init video subsystem */
pool = pjmedia_endpt_create_pool(g_med_endpt, "Video subsystem", 512, 512);
status = pjmedia_video_format_mgr_create(pool, 64, 0, NULL);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
status = pjmedia_converter_mgr_create(pool, NULL);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
status = pjmedia_vid_codec_mgr_create(pool, NULL);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
status = pjmedia_vid_dev_subsys_init(&cp.factory);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
# if defined(PJMEDIA_HAS_OPENH264_CODEC) && PJMEDIA_HAS_OPENH264_CODEC != 0
status = pjmedia_codec_openh264_vid_init(NULL, &cp.factory);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
# endif
# if defined(PJMEDIA_HAS_FFMPEG_VID_CODEC) && PJMEDIA_HAS_FFMPEG_VID_CODEC!=0
/* Init ffmpeg video codecs */
status = pjmedia_codec_ffmpeg_vid_init(NULL, &cp.factory);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
# endif /* PJMEDIA_HAS_FFMPEG_VID_CODEC */
#endif /* PJMEDIA_HAS_VIDEO */
/*
* Create media transport used to send/receive RTP/RTCP socket.
* One media transport is needed for each call. Application may
* opt to re-use the same media transport for subsequent calls.
*/
for (i = 0; i < PJ_ARRAY_SIZE(g_med_transport); ++i) {
status = pjmedia_transport_udp_create3(g_med_endpt, AF, NULL, NULL,
RTP_PORT + i*2, 0,
&g_med_transport[i]);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create media transport", status);
return 1;
}
/*
* Get socket info (address, port) of the media transport. We will
* need this info to create SDP (i.e. the address and port info in
* the SDP).
*/
pjmedia_transport_info_init(&g_med_tpinfo[i]);
pjmedia_transport_get_info(g_med_transport[i], &g_med_tpinfo[i]);
pj_memcpy(&g_sock_info[i], &g_med_tpinfo[i].sock_info,
sizeof(pjmedia_sock_info));
}
/*
* If URL is specified, then make call immediately.
*/
if (argc > 1) {
pj_sockaddr hostaddr;
char hostip[PJ_INET6_ADDRSTRLEN+2];
char temp[80];
pj_str_t dst_uri = pj_str(argv[1]);
pj_str_t local_uri;
pjsip_dialog *dlg;
pjmedia_sdp_session *local_sdp;
pjsip_tx_data *tdata;
if (pj_gethostip(AF, &hostaddr) != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to retrieve local host IP", status);
return 1;
}
pj_sockaddr_print(&hostaddr, hostip, sizeof(hostip), 2);
pj_ansi_sprintf(temp, "<sip:simpleuac@%s:%d>",
hostip, SIP_PORT);
local_uri = pj_str(temp);
/* Create UAC dialog */
status = pjsip_dlg_create_uac( pjsip_ua_instance(),
&local_uri, /* local URI */
&local_uri, /* local Contact */
&dst_uri, /* remote URI */
&dst_uri, /* remote target */
&dlg); /* dialog */
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create UAC dialog", status);
return 1;
}
/* If we expect the outgoing INVITE to be challenged, then we should
* put the credentials in the dialog here, with something like this:
*
{
pjsip_cred_info cred[1];
cred[0].realm = pj_str("sip.server.realm");
cred[0].scheme = pj_str("digest");
cred[0].username = pj_str("theuser");
cred[0].data_type = PJSIP_CRED_DATA_PLAIN_PASSWD;
cred[0].data = pj_str("thepassword");
pjsip_auth_clt_set_credentials( &dlg->auth_sess, 1, cred);
}
*
*/
/* Get the SDP body to be put in the outgoing INVITE, by asking
* media endpoint to create one for us.
*/
status = pjmedia_endpt_create_sdp( g_med_endpt, /* the media endpt */
dlg->pool, /* pool. */
MAX_MEDIA_CNT, /* # of streams */
g_sock_info, /* RTP sock info */
&local_sdp); /* the SDP result */
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Create the INVITE session, and pass the SDP returned earlier
* as the session's initial capability.
*/
status = pjsip_inv_create_uac( dlg, local_sdp, 0, &g_inv);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* If we want the initial INVITE to travel to specific SIP proxies,
* then we should put the initial dialog's route set here. The final
* route set will be updated once a dialog has been established.
* To set the dialog's initial route set, we do it with something
* like this:
*
{
pjsip_route_hdr route_set;
pjsip_route_hdr *route;
const pj_str_t hname = { "Route", 5 };
char *uri = "sip:proxy.server;lr";
pj_list_init(&route_set);
route = pjsip_parse_hdr( dlg->pool, &hname,
uri, strlen(uri),
NULL);
PJ_ASSERT_RETURN(route != NULL, 1);
pj_list_push_back(&route_set, route);
pjsip_dlg_set_route_set(dlg, &route_set);
}
*
* Note that Route URI SHOULD have an ";lr" parameter!
*/
/* Create initial INVITE request.
* This INVITE request will contain a perfectly good request and
* an SDP body as well.
*/
status = pjsip_inv_invite(g_inv, &tdata);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Send initial INVITE request.
* From now on, the invite session's state will be reported to us
* via the invite session callbacks.
*/
status = pjsip_inv_send_msg(g_inv, tdata);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
} else {
/* No URL to make call to */
PJ_LOG(3,(THIS_FILE, "Ready to accept incoming calls..."));
}
/* Loop until one call is completed */
for (;!g_complete;) {
pj_time_val timeout = {0, 10};
pjsip_endpt_handle_events(g_endpt, &timeout);
}
/* On exit, dump current memory usage: */
dump_pool_usage(THIS_FILE, &cp);
/* Destroy audio ports. Destroy the audio port first
* before the stream since the audio port has threads
* that get/put frames to the stream.
*/
if (g_snd_port)
pjmedia_snd_port_destroy(g_snd_port);
#if defined(PJMEDIA_HAS_VIDEO) && (PJMEDIA_HAS_VIDEO != 0)
/* Destroy video ports */
if (g_vid_capturer)
pjmedia_vid_port_destroy(g_vid_capturer);
if (g_vid_renderer)
pjmedia_vid_port_destroy(g_vid_renderer);
#endif
/* Destroy streams */
if (g_med_stream)
pjmedia_stream_destroy(g_med_stream);
#if defined(PJMEDIA_HAS_VIDEO) && (PJMEDIA_HAS_VIDEO != 0)
if (g_med_vstream)
pjmedia_vid_stream_destroy(g_med_vstream);
/* Deinit ffmpeg codec */
# if defined(PJMEDIA_HAS_FFMPEG_VID_CODEC) && PJMEDIA_HAS_FFMPEG_VID_CODEC!=0
pjmedia_codec_ffmpeg_vid_deinit();
# endif
# if defined(PJMEDIA_HAS_OPENH264_CODEC) && PJMEDIA_HAS_OPENH264_CODEC != 0
pjmedia_codec_openh264_vid_deinit();
# endif
#endif
/* Destroy media transports */
for (i = 0; i < MAX_MEDIA_CNT; ++i) {
if (g_med_transport[i])
pjmedia_transport_close(g_med_transport[i]);
}
/* Deinit pjmedia endpoint */
if (g_med_endpt)
pjmedia_endpt_destroy(g_med_endpt);
/* Deinit pjsip endpoint */
if (g_endpt)
pjsip_endpt_destroy(g_endpt);
/* Release pool */
if (pool)
pj_pool_release(pool);
return 0;
}
static int uac_tsx_bench(unsigned working_set, pj_timestamp *p_elapsed)
{
unsigned i;
pjsip_tx_data *request;
pjsip_transaction **tsx;
pj_timestamp t1, t2, elapsed;
pjsip_via_hdr *via;
pj_status_t status;
/* Create the request first. */
pj_str_t str_target = pj_str("sip:[email protected]");
pj_str_t str_from = pj_str("\"Local User\" <sip:[email protected]>");
pj_str_t str_to = pj_str("\"Remote User\" <sip:[email protected]>");
pj_str_t str_contact = str_from;
status = pjsip_endpt_create_request(endpt, &pjsip_invite_method,
&str_target, &str_from, &str_to,
&str_contact, NULL, -1, NULL,
&request);
if (status != PJ_SUCCESS) {
app_perror(" error: unable to create request", status);
return status;
}
via = (pjsip_via_hdr*) pjsip_msg_find_hdr(request->msg, PJSIP_H_VIA,
NULL);
/* Create transaction array */
tsx = (pjsip_transaction**) pj_pool_zalloc(request->pool, working_set * sizeof(pj_pool_t*));
pj_bzero(&mod_tsx_user, sizeof(mod_tsx_user));
mod_tsx_user.id = -1;
/* Benchmark */
elapsed.u64 = 0;
pj_get_timestamp(&t1);
for (i=0; i<working_set; ++i) {
status = pjsip_tsx_create_uac(&mod_tsx_user, request, &tsx[i]);
if (status != PJ_SUCCESS)
goto on_error;
/* Reset branch param */
via->branch_param.slen = 0;
}
pj_get_timestamp(&t2);
pj_sub_timestamp(&t2, &t1);
pj_add_timestamp(&elapsed, &t2);
p_elapsed->u64 = elapsed.u64;
status = PJ_SUCCESS;
on_error:
for (i=0; i<working_set; ++i) {
if (tsx[i]) {
pjsip_tsx_terminate(tsx[i], 601);
tsx[i] = NULL;
}
}
pjsip_tx_data_dec_ref(request);
flush_events(2000);
return status;
}
/*
* Callback when incoming requests outside any transactions and any
* dialogs are received. We're only interested to hande incoming INVITE
* request, and we'll reject any other requests with 500 response.
*/
static pj_bool_t on_rx_request( pjsip_rx_data *rdata )
{
pj_sockaddr hostaddr;
char temp[80], hostip[PJ_INET6_ADDRSTRLEN];
pj_str_t local_uri;
pjsip_dialog *dlg;
pjmedia_sdp_session *local_sdp;
pjsip_tx_data *tdata;
unsigned options = 0;
pj_status_t status;
/*
* Respond (statelessly) any non-INVITE requests with 500
*/
if (rdata->msg_info.msg->line.req.method.id != PJSIP_INVITE_METHOD) {
if (rdata->msg_info.msg->line.req.method.id != PJSIP_ACK_METHOD) {
pj_str_t reason = pj_str("Simple UA unable to handle "
"this request");
pjsip_endpt_respond_stateless( g_endpt, rdata,
500, &reason,
NULL, NULL);
}
return PJ_TRUE;
}
/*
* Reject INVITE if we already have an INVITE session in progress.
*/
if (g_inv) {
pj_str_t reason = pj_str("Another call is in progress");
pjsip_endpt_respond_stateless( g_endpt, rdata,
500, &reason,
NULL, NULL);
return PJ_TRUE;
}
/* Verify that we can handle the request. */
status = pjsip_inv_verify_request(rdata, &options, NULL, NULL,
g_endpt, NULL);
if (status != PJ_SUCCESS) {
pj_str_t reason = pj_str("Sorry Simple UA can not handle this INVITE");
pjsip_endpt_respond_stateless( g_endpt, rdata,
500, &reason,
NULL, NULL);
return PJ_TRUE;
}
/*
* Generate Contact URI
*/
if (pj_gethostip(AF, &hostaddr) != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to retrieve local host IP", status);
return PJ_TRUE;
}
pj_sockaddr_print(&hostaddr, hostip, sizeof(hostip), 2);
pj_ansi_sprintf(temp, "<sip:simpleuas@%s:%d>",
hostip, SIP_PORT);
local_uri = pj_str(temp);
/*
* Create UAS dialog.
*/
status = pjsip_dlg_create_uas( pjsip_ua_instance(),
rdata,
&local_uri, /* contact */
&dlg);
if (status != PJ_SUCCESS) {
pjsip_endpt_respond_stateless(g_endpt, rdata, 500, NULL,
NULL, NULL);
return PJ_TRUE;
}
/*
* Get media capability from media endpoint:
*/
status = pjmedia_endpt_create_sdp( g_med_endpt, rdata->tp_info.pool,
MAX_MEDIA_CNT, g_sock_info, &local_sdp);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, PJ_TRUE);
/*
* Create invite session, and pass both the UAS dialog and the SDP
* capability to the session.
*/
status = pjsip_inv_create_uas( dlg, rdata, local_sdp, 0, &g_inv);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, PJ_TRUE);
/*
* Initially send 180 response.
*
* The very first response to an INVITE must be created with
* pjsip_inv_initial_answer(). Subsequent responses to the same
* transaction MUST use pjsip_inv_answer().
*/
status = pjsip_inv_initial_answer(g_inv, rdata,
180,
NULL, NULL, &tdata);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, PJ_TRUE);
/* Send the 180 response. */
status = pjsip_inv_send_msg(g_inv, tdata);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, PJ_TRUE);
/*
* Now create 200 response.
*/
status = pjsip_inv_answer( g_inv,
200, NULL, /* st_code and st_text */
NULL, /* SDP already specified */
&tdata);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, PJ_TRUE);
/*
* Send the 200 response.
*/
status = pjsip_inv_send_msg(g_inv, tdata);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, PJ_TRUE);
/* Done.
* When the call is disconnected, it will be reported via the callback.
*/
return PJ_TRUE;
}
/*
* Compliance test for success scenario.
*/
static int compliance_test_0(void)
{
pj_sock_t ssock=-1, csock0=-1, csock1=-1;
pj_sockaddr_in addr, client_addr, rmt_addr;
int client_addr_len;
pj_pool_t *pool = NULL;
char *send_buf, *recv_buf;
pj_ioqueue_t *ioque = NULL;
pj_ioqueue_key_t *skey, *ckey0, *ckey1;
pj_ioqueue_op_key_t accept_op;
int bufsize = BUF_MIN_SIZE;
pj_ssize_t status = -1;
int pending_op = 0;
pj_timestamp t_elapsed;
pj_str_t s;
pj_status_t rc;
// Create pool.
pool = pj_pool_create(mem, NULL, POOL_SIZE, 4000, NULL);
// Allocate buffers for send and receive.
send_buf = (char*)pj_pool_alloc(pool, bufsize);
recv_buf = (char*)pj_pool_alloc(pool, bufsize);
// Create server socket and client socket for connecting
rc = pj_sock_socket(PJ_AF_INET, PJ_SOCK_STREAM, 0, &ssock);
if (rc != PJ_SUCCESS) {
app_perror("...error creating socket", rc);
status=-1; goto on_error;
}
rc = pj_sock_socket(PJ_AF_INET, PJ_SOCK_STREAM, 0, &csock1);
if (rc != PJ_SUCCESS) {
app_perror("...error creating socket", rc);
status=-1; goto on_error;
}
// Bind server socket.
pj_sockaddr_in_init(&addr, 0, 0);
if ((rc=pj_sock_bind(ssock, &addr, sizeof(addr))) != 0 ) {
app_perror("...bind error", rc);
status=-10; goto on_error;
}
// Get server address.
client_addr_len = sizeof(addr);
rc = pj_sock_getsockname(ssock, &addr, &client_addr_len);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_sock_getsockname()", rc);
status=-15; goto on_error;
}
addr.sin_addr = pj_inet_addr(pj_cstr(&s, "127.0.0.1"));
// Create I/O Queue.
rc = pj_ioqueue_create(pool, PJ_IOQUEUE_MAX_HANDLES, &ioque);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_ioqueue_create()", rc);
status=-20; goto on_error;
}
// Register server socket and client socket.
rc = pj_ioqueue_register_sock(pool, ioque, ssock, NULL, &test_cb, &skey);
if (rc == PJ_SUCCESS)
rc = pj_ioqueue_register_sock(pool, ioque, csock1, NULL, &test_cb,
&ckey1);
else
ckey1 = NULL;
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_ioqueue_register_sock()", rc);
status=-23; goto on_error;
}
// Server socket listen().
if (pj_sock_listen(ssock, 5)) {
app_perror("...ERROR in pj_sock_listen()", rc);
status=-25; goto on_error;
}
// Server socket accept()
client_addr_len = sizeof(pj_sockaddr_in);
status = pj_ioqueue_accept(skey, &accept_op, &csock0,
&client_addr, &rmt_addr, &client_addr_len);
if (status != PJ_EPENDING) {
app_perror("...ERROR in pj_ioqueue_accept()", rc);
status=-30; goto on_error;
}
if (status==PJ_EPENDING) {
++pending_op;
}
// Client socket connect()
status = pj_ioqueue_connect(ckey1, &addr, sizeof(addr));
if (status!=PJ_SUCCESS && status != PJ_EPENDING) {
app_perror("...ERROR in pj_ioqueue_connect()", rc);
status=-40; goto on_error;
}
if (status==PJ_EPENDING) {
++pending_op;
}
// Poll until connected
callback_read_size = callback_write_size = 0;
callback_accept_status = callback_connect_status = -2;
callback_read_key = callback_write_key =
callback_accept_key = callback_connect_key = NULL;
callback_accept_op = callback_read_op = callback_write_op = NULL;
while (pending_op) {
pj_time_val timeout = {1, 0};
status=pj_ioqueue_poll(ioque, &timeout);
if (status > 0) {
if (callback_accept_status != -2) {
if (callback_accept_status != 0) {
status=-41; goto on_error;
}
if (callback_accept_key != skey) {
status=-42; goto on_error;
}
if (callback_accept_op != &accept_op) {
status=-43; goto on_error;
}
callback_accept_status = -2;
}
if (callback_connect_status != -2) {
if (callback_connect_status != 0) {
status=-50; goto on_error;
}
if (callback_connect_key != ckey1) {
status=-51; goto on_error;
}
callback_connect_status = -2;
}
if (status > pending_op) {
PJ_LOG(3,(THIS_FILE,
"...error: pj_ioqueue_poll() returned %d "
"(only expecting %d)",
status, pending_op));
return -52;
}
pending_op -= status;
if (pending_op == 0) {
status = 0;
}
}
}
// There's no pending operation.
// When we poll the ioqueue, there must not be events.
if (pending_op == 0) {
pj_time_val timeout = {1, 0};
status = pj_ioqueue_poll(ioque, &timeout);
if (status != 0) {
status=-60; goto on_error;
}
}
// Check accepted socket.
if (csock0 == PJ_INVALID_SOCKET) {
status = -69;
app_perror("...accept() error", pj_get_os_error());
goto on_error;
}
// Register newly accepted socket.
rc = pj_ioqueue_register_sock(pool, ioque, csock0, NULL,
&test_cb, &ckey0);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_ioqueue_register_sock", rc);
status = -70;
goto on_error;
}
// Test send and receive.
t_elapsed.u32.lo = 0;
status = send_recv_test(ioque, ckey0, ckey1, send_buf,
recv_buf, bufsize, &t_elapsed);
if (status != 0) {
goto on_error;
}
// Success
status = 0;
on_error:
if (ssock != PJ_INVALID_SOCKET)
pj_sock_close(ssock);
if (csock1 != PJ_INVALID_SOCKET)
pj_sock_close(csock1);
if (csock0 != PJ_INVALID_SOCKET)
pj_sock_close(csock0);
if (ioque != NULL)
pj_ioqueue_destroy(ioque);
pj_pool_release(pool);
return status;
}
/*
* Callback when SDP negotiation has completed.
* We are interested with this callback because we want to start media
* as soon as SDP negotiation is completed.
*/
static void call_on_media_update( pjsip_inv_session *inv,
pj_status_t status)
{
pjmedia_stream_info stream_info;
const pjmedia_sdp_session *local_sdp;
const pjmedia_sdp_session *remote_sdp;
pjmedia_port *media_port;
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "SDP negotiation has failed", status);
/* Here we should disconnect call if we're not in the middle
* of initializing an UAS dialog and if this is not a re-INVITE.
*/
return;
}
/* Get local and remote SDP.
* We need both SDPs to create a media session.
*/
status = pjmedia_sdp_neg_get_active_local(inv->neg, &local_sdp);
status = pjmedia_sdp_neg_get_active_remote(inv->neg, &remote_sdp);
/* Create stream info based on the media audio SDP. */
status = pjmedia_stream_info_from_sdp(&stream_info, inv->dlg->pool,
g_med_endpt,
local_sdp, remote_sdp, 0);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE,"Unable to create audio stream info",status);
return;
}
/* If required, we can also change some settings in the stream info,
* (such as jitter buffer settings, codec settings, etc) before we
* create the stream.
*/
/* Create new audio media stream, passing the stream info, and also the
* media socket that we created earlier.
*/
status = pjmedia_stream_create(g_med_endpt, inv->dlg->pool, &stream_info,
g_med_transport[0], NULL, &g_med_stream);
if (status != PJ_SUCCESS) {
app_perror( THIS_FILE, "Unable to create audio stream", status);
return;
}
/* Start the audio stream */
status = pjmedia_stream_start(g_med_stream);
if (status != PJ_SUCCESS) {
app_perror( THIS_FILE, "Unable to start audio stream", status);
return;
}
/* Get the media port interface of the audio stream.
* Media port interface is basicly a struct containing get_frame() and
* put_frame() function. With this media port interface, we can attach
* the port interface to conference bridge, or directly to a sound
* player/recorder device.
*/
pjmedia_stream_get_port(g_med_stream, &media_port);
/* Create sound port */
pjmedia_snd_port_create(inv->pool,
PJMEDIA_AUD_DEFAULT_CAPTURE_DEV,
PJMEDIA_AUD_DEFAULT_PLAYBACK_DEV,
PJMEDIA_PIA_SRATE(&media_port->info),/* clock rate */
PJMEDIA_PIA_CCNT(&media_port->info),/* channel count */
PJMEDIA_PIA_SPF(&media_port->info), /* samples per frame*/
PJMEDIA_PIA_BITS(&media_port->info),/* bits per sample */
0,
&g_snd_port);
if (status != PJ_SUCCESS) {
app_perror( THIS_FILE, "Unable to create sound port", status);
PJ_LOG(3,(THIS_FILE, "%d %d %d %d",
PJMEDIA_PIA_SRATE(&media_port->info),/* clock rate */
PJMEDIA_PIA_CCNT(&media_port->info),/* channel count */
PJMEDIA_PIA_SPF(&media_port->info), /* samples per frame*/
PJMEDIA_PIA_BITS(&media_port->info) /* bits per sample */
));
return;
}
status = pjmedia_snd_port_connect(g_snd_port, media_port);
/* Get the media port interface of the second stream in the session,
* which is video stream. With this media port interface, we can attach
* the port directly to a renderer/capture video device.
*/
#if defined(PJMEDIA_HAS_VIDEO) && (PJMEDIA_HAS_VIDEO != 0)
if (local_sdp->media_count > 1) {
pjmedia_vid_stream_info vstream_info;
pjmedia_vid_port_param vport_param;
pjmedia_vid_port_param_default(&vport_param);
/* Create stream info based on the media video SDP. */
status = pjmedia_vid_stream_info_from_sdp(&vstream_info,
inv->dlg->pool, g_med_endpt,
local_sdp, remote_sdp, 1);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE,"Unable to create video stream info",status);
return;
}
/* If required, we can also change some settings in the stream info,
* (such as jitter buffer settings, codec settings, etc) before we
* create the video stream.
*/
/* Create new video media stream, passing the stream info, and also the
* media socket that we created earlier.
*/
status = pjmedia_vid_stream_create(g_med_endpt, NULL, &vstream_info,
g_med_transport[1], NULL,
&g_med_vstream);
if (status != PJ_SUCCESS) {
app_perror( THIS_FILE, "Unable to create video stream", status);
return;
}
/* Start the video stream */
status = pjmedia_vid_stream_start(g_med_vstream);
if (status != PJ_SUCCESS) {
app_perror( THIS_FILE, "Unable to start video stream", status);
return;
}
if (vstream_info.dir & PJMEDIA_DIR_DECODING) {
status = pjmedia_vid_dev_default_param(
inv->pool, PJMEDIA_VID_DEFAULT_RENDER_DEV,
&vport_param.vidparam);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to get default param of video "
"renderer device", status);
return;
}
/* Get video stream port for decoding direction */
pjmedia_vid_stream_get_port(g_med_vstream, PJMEDIA_DIR_DECODING,
&media_port);
/* Set format */
pjmedia_format_copy(&vport_param.vidparam.fmt,
&media_port->info.fmt);
vport_param.vidparam.dir = PJMEDIA_DIR_RENDER;
vport_param.active = PJ_TRUE;
/* Create renderer */
status = pjmedia_vid_port_create(inv->pool, &vport_param,
&g_vid_renderer);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create video renderer device",
status);
return;
}
/* Connect renderer to media_port */
status = pjmedia_vid_port_connect(g_vid_renderer, media_port,
PJ_FALSE);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to connect renderer to stream",
status);
return;
}
}
/* Create capturer */
if (vstream_info.dir & PJMEDIA_DIR_ENCODING) {
status = pjmedia_vid_dev_default_param(
inv->pool, PJMEDIA_VID_DEFAULT_CAPTURE_DEV,
&vport_param.vidparam);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to get default param of video "
"capture device", status);
return;
}
/* Get video stream port for decoding direction */
pjmedia_vid_stream_get_port(g_med_vstream, PJMEDIA_DIR_ENCODING,
&media_port);
/* Get capturer format from stream info */
pjmedia_format_copy(&vport_param.vidparam.fmt,
&media_port->info.fmt);
vport_param.vidparam.dir = PJMEDIA_DIR_CAPTURE;
vport_param.active = PJ_TRUE;
/* Create capturer */
status = pjmedia_vid_port_create(inv->pool, &vport_param,
&g_vid_capturer);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create video capture device",
status);
return;
}
/* Connect capturer to media_port */
status = pjmedia_vid_port_connect(g_vid_capturer, media_port,
PJ_FALSE);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to connect capturer to stream",
status);
return;
}
}
/* Start streaming */
if (g_vid_renderer) {
status = pjmedia_vid_port_start(g_vid_renderer);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to start video renderer",
status);
return;
}
}
if (g_vid_capturer) {
status = pjmedia_vid_port_start(g_vid_capturer);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to start video capturer",
status);
return;
}
}
}
#endif /* PJMEDIA_HAS_VIDEO */
/* Done with media. */
}
/*
* Repeated connect/accept on the same listener socket.
*/
static int compliance_test_2(void)
{
enum { MAX_PAIR = 4, TEST_LOOP = 2 };
struct listener
{
pj_sock_t sock;
pj_ioqueue_key_t *key;
pj_sockaddr_in addr;
int addr_len;
} listener;
struct server
{
pj_sock_t sock;
pj_ioqueue_key_t *key;
pj_sockaddr_in local_addr;
pj_sockaddr_in rem_addr;
int rem_addr_len;
pj_ioqueue_op_key_t accept_op;
} server[MAX_PAIR];
struct client
{
pj_sock_t sock;
pj_ioqueue_key_t *key;
} client[MAX_PAIR];
pj_pool_t *pool = NULL;
char *send_buf, *recv_buf;
pj_ioqueue_t *ioque = NULL;
int i, bufsize = BUF_MIN_SIZE;
pj_ssize_t status;
int test_loop, pending_op = 0;
pj_timestamp t_elapsed;
pj_str_t s;
pj_status_t rc;
// Create pool.
pool = pj_pool_create(mem, NULL, POOL_SIZE, 4000, NULL);
// Create I/O Queue.
rc = pj_ioqueue_create(pool, PJ_IOQUEUE_MAX_HANDLES, &ioque);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_ioqueue_create()", rc);
return -10;
}
// Allocate buffers for send and receive.
send_buf = (char*)pj_pool_alloc(pool, bufsize);
recv_buf = (char*)pj_pool_alloc(pool, bufsize);
// Create listener socket
rc = pj_sock_socket(PJ_AF_INET, PJ_SOCK_STREAM, 0, &listener.sock);
if (rc != PJ_SUCCESS) {
app_perror("...error creating socket", rc);
status=-20; goto on_error;
}
// Bind listener socket.
pj_sockaddr_in_init(&listener.addr, 0, 0);
if ((rc=pj_sock_bind(listener.sock, &listener.addr, sizeof(listener.addr))) != 0 ) {
app_perror("...bind error", rc);
status=-30; goto on_error;
}
// Get listener address.
listener.addr_len = sizeof(listener.addr);
rc = pj_sock_getsockname(listener.sock, &listener.addr, &listener.addr_len);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_sock_getsockname()", rc);
status=-40; goto on_error;
}
listener.addr.sin_addr = pj_inet_addr(pj_cstr(&s, "127.0.0.1"));
// Register listener socket.
rc = pj_ioqueue_register_sock(pool, ioque, listener.sock, NULL, &test_cb,
&listener.key);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR", rc);
status=-50; goto on_error;
}
// Listener socket listen().
if (pj_sock_listen(listener.sock, 5)) {
app_perror("...ERROR in pj_sock_listen()", rc);
status=-60; goto on_error;
}
for (test_loop=0; test_loop < TEST_LOOP; ++test_loop) {
// Client connect and server accept.
for (i=0; i<MAX_PAIR; ++i) {
rc = pj_sock_socket(PJ_AF_INET, PJ_SOCK_STREAM, 0, &client[i].sock);
if (rc != PJ_SUCCESS) {
app_perror("...error creating socket", rc);
status=-70; goto on_error;
}
rc = pj_ioqueue_register_sock(pool, ioque, client[i].sock, NULL,
&test_cb, &client[i].key);
if (rc != PJ_SUCCESS) {
app_perror("...error ", rc);
status=-80; goto on_error;
}
// Server socket accept()
pj_ioqueue_op_key_init(&server[i].accept_op,
sizeof(server[i].accept_op));
server[i].rem_addr_len = sizeof(pj_sockaddr_in);
status = pj_ioqueue_accept(listener.key, &server[i].accept_op,
&server[i].sock, &server[i].local_addr,
&server[i].rem_addr,
&server[i].rem_addr_len);
if (status!=PJ_SUCCESS && status != PJ_EPENDING) {
app_perror("...ERROR in pj_ioqueue_accept()", rc);
status=-90; goto on_error;
}
if (status==PJ_EPENDING) {
++pending_op;
}
// Client socket connect()
status = pj_ioqueue_connect(client[i].key, &listener.addr,
sizeof(listener.addr));
if (status!=PJ_SUCCESS && status != PJ_EPENDING) {
app_perror("...ERROR in pj_ioqueue_connect()", rc);
status=-100; goto on_error;
}
if (status==PJ_EPENDING) {
++pending_op;
}
}
// Poll until all connected
while (pending_op) {
pj_time_val timeout = {1, 0};
status=pj_ioqueue_poll(ioque, &timeout);
if (status > 0) {
if (status > pending_op) {
PJ_LOG(3,(THIS_FILE,
"...error: pj_ioqueue_poll() returned %d "
"(only expecting %d)",
status, pending_op));
return -110;
}
pending_op -= status;
if (pending_op == 0) {
status = 0;
}
}
}
// There's no pending operation.
// When we poll the ioqueue, there must not be events.
if (pending_op == 0) {
pj_time_val timeout = {1, 0};
status = pj_ioqueue_poll(ioque, &timeout);
if (status != 0) {
status=-120; goto on_error;
}
}
for (i=0; i<MAX_PAIR; ++i) {
// Check server socket.
if (server[i].sock == PJ_INVALID_SOCKET) {
status = -130;
app_perror("...accept() error", pj_get_os_error());
goto on_error;
}
// Check addresses
if (server[i].local_addr.sin_family != PJ_AF_INET ||
server[i].local_addr.sin_addr.s_addr == 0 ||
server[i].local_addr.sin_port == 0)
{
app_perror("...ERROR address not set", rc);
status = -140;
goto on_error;
}
if (server[i].rem_addr.sin_family != PJ_AF_INET ||
server[i].rem_addr.sin_addr.s_addr == 0 ||
server[i].rem_addr.sin_port == 0)
{
app_perror("...ERROR address not set", rc);
status = -150;
goto on_error;
}
// Register newly accepted socket.
rc = pj_ioqueue_register_sock(pool, ioque, server[i].sock, NULL,
&test_cb, &server[i].key);
if (rc != PJ_SUCCESS) {
app_perror("...ERROR in pj_ioqueue_register_sock", rc);
status = -160;
goto on_error;
}
// Test send and receive.
t_elapsed.u32.lo = 0;
status = send_recv_test(ioque, server[i].key, client[i].key,
send_buf, recv_buf, bufsize, &t_elapsed);
if (status != 0) {
goto on_error;
}
}
// Success
status = 0;
for (i=0; i<MAX_PAIR; ++i) {
if (server[i].key != NULL) {
pj_ioqueue_unregister(server[i].key);
server[i].key = NULL;
server[i].sock = PJ_INVALID_SOCKET;
} else if (server[i].sock != PJ_INVALID_SOCKET) {
pj_sock_close(server[i].sock);
server[i].sock = PJ_INVALID_SOCKET;
}
if (client[i].key != NULL) {
pj_ioqueue_unregister(client[i].key);
client[i].key = NULL;
client[i].sock = PJ_INVALID_SOCKET;
} else if (client[i].sock != PJ_INVALID_SOCKET) {
pj_sock_close(client[i].sock);
client[i].sock = PJ_INVALID_SOCKET;
}
}
}
status = 0;
on_error:
for (i=0; i<MAX_PAIR; ++i) {
if (server[i].key != NULL) {
pj_ioqueue_unregister(server[i].key);
server[i].key = NULL;
server[i].sock = PJ_INVALID_SOCKET;
} else if (server[i].sock != PJ_INVALID_SOCKET) {
pj_sock_close(server[i].sock);
server[i].sock = PJ_INVALID_SOCKET;
}
if (client[i].key != NULL) {
pj_ioqueue_unregister(client[i].key);
client[i].key = NULL;
server[i].sock = PJ_INVALID_SOCKET;
} else if (client[i].sock != PJ_INVALID_SOCKET) {
pj_sock_close(client[i].sock);
client[i].sock = PJ_INVALID_SOCKET;
}
}
if (listener.key) {
pj_ioqueue_unregister(listener.key);
listener.key = NULL;
} else if (listener.sock != PJ_INVALID_SOCKET) {
pj_sock_close(listener.sock);
listener.sock = PJ_INVALID_SOCKET;
}
if (ioque != NULL)
pj_ioqueue_destroy(ioque);
pj_pool_release(pool);
return status;
}
static void on_read_complete(pj_ioqueue_key_t *key,
pj_ioqueue_op_key_t *op_key,
pj_ssize_t bytes_received)
{
pj_status_t rc;
struct op_key *recv_rec = (struct op_key *)op_key;
for (;;) {
struct op_key *send_rec = recv_rec->peer;
recv_rec->is_pending = 0;
if (bytes_received < 0) {
if (-bytes_received != recv_rec->last_err) {
recv_rec->last_err = (pj_status_t)-bytes_received;
app_perror("...error receiving data", recv_rec->last_err);
}
} else if (bytes_received == 0) {
/* note: previous error, or write callback */
} else {
pj_atomic_add(total_bytes, (pj_atomic_value_t)bytes_received);
if (!send_rec->is_pending) {
pj_ssize_t sent = bytes_received;
pj_memcpy(send_rec->buffer, recv_rec->buffer, bytes_received);
pj_memcpy(&send_rec->addr, &recv_rec->addr, recv_rec->addrlen);
send_rec->addrlen = recv_rec->addrlen;
rc = pj_ioqueue_sendto(key, &send_rec->op_key_,
send_rec->buffer, &sent, 0,
&send_rec->addr, send_rec->addrlen);
send_rec->is_pending = (rc==PJ_EPENDING);
if (rc!=PJ_SUCCESS && rc!=PJ_EPENDING) {
app_perror("...send error(1)", rc);
}
}
}
if (!send_rec->is_pending) {
bytes_received = recv_rec->size;
rc = pj_ioqueue_recvfrom(key, &recv_rec->op_key_,
recv_rec->buffer, &bytes_received, 0,
&recv_rec->addr, &recv_rec->addrlen);
recv_rec->is_pending = (rc==PJ_EPENDING);
if (rc == PJ_SUCCESS) {
/* fall through next loop. */
} else if (rc == PJ_EPENDING) {
/* quit callback. */
break;
} else {
/* error */
app_perror("...recv error", rc);
recv_rec->last_err = rc;
bytes_received = 0;
/* fall through next loop. */
}
} else {
/* recv will be done when write completion callback is called. */
break;
}
}
}
/*
* main()
*/
int main(int argc, char *argv[])
{
pj_caching_pool cp;
pjmedia_endpt *med_endpt;
pj_pool_t *pool;
pjmedia_port *sine_port;
pjmedia_snd_port *snd_port;
char tmp[10];
int channel_count = 1;
pj_status_t status;
if (argc == 2) {
channel_count = atoi(argv[1]);
if (channel_count < 1 || channel_count > 2) {
puts("Error: invalid arguments");
usage();
return 1;
}
}
/* Must init PJLIB first: */
status = pj_init();
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Must create a pool factory before we can allocate any memory. */
pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
/*
* Initialize media endpoint.
* This will implicitly initialize PJMEDIA too.
*/
status = pjmedia_endpt_create(&cp.factory, NULL, 1, &med_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Create memory pool for our sine generator */
pool = pj_pool_create( &cp.factory, /* pool factory */
"wav", /* pool name. */
4000, /* init size */
4000, /* increment size */
NULL /* callback on error */
);
/* Create a media port to generate sine wave samples. */
status = create_sine_port( pool, /* memory pool */
11025, /* sampling rate */
channel_count,/* # of channels */
&sine_port /* returned port */
);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create sine port", status);
return 1;
}
/* Create sound player port. */
status = pjmedia_snd_port_create_player(
pool, /* pool */
-1, /* use default dev. */
PJMEDIA_PIA_SRATE(&sine_port->info),/* clock rate. */
PJMEDIA_PIA_CCNT(&sine_port->info),/* # of channels. */
PJMEDIA_PIA_SPF(&sine_port->info), /* samples per frame. */
PJMEDIA_PIA_BITS(&sine_port->info),/* bits per sample. */
0, /* options */
&snd_port /* returned port */
);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to open sound device", status);
return 1;
}
/* Connect sine generator port to the sound player
* Stream playing will commence immediately.
*/
status = pjmedia_snd_port_connect( snd_port, sine_port);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/*
* Audio should be playing in a loop now, using sound device's thread.
*/
/* Sleep to allow log messages to flush */
pj_thread_sleep(100);
puts("Playing sine wave..");
puts("");
puts("Press <ENTER> to stop playing and quit");
if (fgets(tmp, sizeof(tmp), stdin) == NULL) {
puts("EOF while reading stdin, will quit now..");
}
/* Start deinitialization: */
/* Disconnect sound port from file port */
status = pjmedia_snd_port_disconnect(snd_port);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Without this sleep, Windows/DirectSound will repeteadly
* play the last frame during destroy.
*/
pj_thread_sleep(100);
/* Destroy sound device */
status = pjmedia_snd_port_destroy( snd_port );
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Destroy sine generator */
status = pjmedia_port_destroy( sine_port );
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Release application pool */
pj_pool_release( pool );
/* Destroy media endpoint. */
pjmedia_endpt_destroy( med_endpt );
/* Destroy pool factory */
pj_caching_pool_destroy( &cp );
/* Shutdown PJLIB */
pj_shutdown();
/* Done. */
return 0;
}
/*
* main()
*/
int main(int argc, char *argv[])
{
pj_caching_pool cp;
pjmedia_endpt *med_endpt;
pj_pool_t *pool;
pjmedia_port *rec_file_port = NULL, *play_file_port = NULL;
pjmedia_master_port *master_port = NULL;
pjmedia_snd_port *snd_port = NULL;
pjmedia_stream *stream = NULL;
pjmedia_port *stream_port;
char tmp[10];
pj_status_t status;
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
/* SRTP variables */
pj_bool_t use_srtp = PJ_FALSE;
char tmp_tx_key[64];
char tmp_rx_key[64];
pj_str_t srtp_tx_key = {NULL, 0};
pj_str_t srtp_rx_key = {NULL, 0};
pj_str_t srtp_crypto_suite = {NULL, 0};
int tmp_key_len;
#endif
/* Default values */
const pjmedia_codec_info *codec_info;
pjmedia_codec_param codec_param;
pjmedia_dir dir = PJMEDIA_DIR_DECODING;
pj_sockaddr_in remote_addr;
pj_uint16_t local_port = 4000;
char *codec_id = NULL;
char *rec_file = NULL;
char *play_file = NULL;
enum {
OPT_CODEC = 'c',
OPT_LOCAL_PORT = 'p',
OPT_REMOTE = 'r',
OPT_PLAY_FILE = 'w',
OPT_RECORD_FILE = 'R',
OPT_SEND_RECV = 'b',
OPT_SEND_ONLY = 's',
OPT_RECV_ONLY = 'i',
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
OPT_USE_SRTP = 'S',
#endif
OPT_SRTP_TX_KEY = 'x',
OPT_SRTP_RX_KEY = 'y',
OPT_HELP = 'h',
};
struct pj_getopt_option long_options[] = {
{ "codec", 1, 0, OPT_CODEC },
{ "local-port", 1, 0, OPT_LOCAL_PORT },
{ "remote", 1, 0, OPT_REMOTE },
{ "play-file", 1, 0, OPT_PLAY_FILE },
{ "record-file", 1, 0, OPT_RECORD_FILE },
{ "send-recv", 0, 0, OPT_SEND_RECV },
{ "send-only", 0, 0, OPT_SEND_ONLY },
{ "recv-only", 0, 0, OPT_RECV_ONLY },
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
{ "use-srtp", 2, 0, OPT_USE_SRTP },
{ "srtp-tx-key", 1, 0, OPT_SRTP_TX_KEY },
{ "srtp-rx-key", 1, 0, OPT_SRTP_RX_KEY },
#endif
{ "help", 0, 0, OPT_HELP },
{ NULL, 0, 0, 0 },
};
int c;
int option_index;
pj_bzero(&remote_addr, sizeof(remote_addr));
/* init PJLIB : */
status = pj_init();
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Parse arguments */
pj_optind = 0;
while((c=pj_getopt_long(argc,argv, "h", long_options, &option_index))!=-1) {
switch (c) {
case OPT_CODEC:
codec_id = pj_optarg;
break;
case OPT_LOCAL_PORT:
local_port = (pj_uint16_t) atoi(pj_optarg);
if (local_port < 1) {
printf("Error: invalid local port %s\n", pj_optarg);
return 1;
}
break;
case OPT_REMOTE:
{
pj_str_t ip = pj_str(strtok(pj_optarg, ":"));
pj_uint16_t port = (pj_uint16_t) atoi(strtok(NULL, ":"));
status = pj_sockaddr_in_init(&remote_addr, &ip, port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Invalid remote address", status);
return 1;
}
}
break;
case OPT_PLAY_FILE:
play_file = pj_optarg;
break;
case OPT_RECORD_FILE:
rec_file = pj_optarg;
break;
case OPT_SEND_RECV:
dir = PJMEDIA_DIR_ENCODING_DECODING;
break;
case OPT_SEND_ONLY:
dir = PJMEDIA_DIR_ENCODING;
break;
case OPT_RECV_ONLY:
dir = PJMEDIA_DIR_DECODING;
break;
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
case OPT_USE_SRTP:
use_srtp = PJ_TRUE;
if (pj_optarg) {
pj_strset(&srtp_crypto_suite, pj_optarg, strlen(pj_optarg));
} else {
srtp_crypto_suite = pj_str("AES_CM_128_HMAC_SHA1_80");
}
break;
case OPT_SRTP_TX_KEY:
tmp_key_len = hex_string_to_octet_string(tmp_tx_key, pj_optarg,
(int)strlen(pj_optarg));
pj_strset(&srtp_tx_key, tmp_tx_key, tmp_key_len/2);
break;
case OPT_SRTP_RX_KEY:
tmp_key_len = hex_string_to_octet_string(tmp_rx_key, pj_optarg,
(int)strlen(pj_optarg));
pj_strset(&srtp_rx_key, tmp_rx_key, tmp_key_len/2);
break;
#endif
case OPT_HELP:
usage();
return 1;
default:
printf("Invalid options %s\n", argv[pj_optind]);
return 1;
}
}
/* Verify arguments. */
if (dir & PJMEDIA_DIR_ENCODING) {
if (remote_addr.sin_addr.s_addr == 0) {
printf("Error: remote address must be set\n");
return 1;
}
}
if (play_file != NULL && dir != PJMEDIA_DIR_ENCODING) {
printf("Direction is set to --send-only because of --play-file\n");
dir = PJMEDIA_DIR_ENCODING;
}
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
/* SRTP validation */
if (use_srtp) {
if (!srtp_tx_key.slen || !srtp_rx_key.slen)
{
printf("Error: Key for each SRTP stream direction must be set\n");
return 1;
}
}
#endif
/* Must create a pool factory before we can allocate any memory. */
pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
/*
* Initialize media endpoint.
* This will implicitly initialize PJMEDIA too.
*/
status = pjmedia_endpt_create(&cp.factory, NULL, 1, &med_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Create memory pool for application purpose */
pool = pj_pool_create( &cp.factory, /* pool factory */
"app", /* pool name. */
4000, /* init size */
4000, /* increment size */
NULL /* callback on error */
);
/* Register all supported codecs */
status = init_codecs(med_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Find which codec to use. */
if (codec_id) {
unsigned count = 1;
pj_str_t str_codec_id = pj_str(codec_id);
pjmedia_codec_mgr *codec_mgr = pjmedia_endpt_get_codec_mgr(med_endpt);
status = pjmedia_codec_mgr_find_codecs_by_id( codec_mgr,
&str_codec_id, &count,
&codec_info, NULL);
if (status != PJ_SUCCESS) {
printf("Error: unable to find codec %s\n", codec_id);
return 1;
}
} else {
/* Default to pcmu */
pjmedia_codec_mgr_get_codec_info( pjmedia_endpt_get_codec_mgr(med_endpt),
0, &codec_info);
}
/* Create stream based on program arguments */
status = create_stream(pool, med_endpt, codec_info, dir, local_port,
&remote_addr,
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
use_srtp, &srtp_crypto_suite,
&srtp_tx_key, &srtp_rx_key,
#endif
&stream);
if (status != PJ_SUCCESS)
goto on_exit;
/* Get codec default param for info */
status = pjmedia_codec_mgr_get_default_param(
pjmedia_endpt_get_codec_mgr(med_endpt),
codec_info,
&codec_param);
/* Should be ok, as create_stream() above succeeded */
pj_assert(status == PJ_SUCCESS);
/* Get the port interface of the stream */
status = pjmedia_stream_get_port( stream, &stream_port);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
if (play_file) {
unsigned wav_ptime;
wav_ptime = PJMEDIA_PIA_PTIME(&stream_port->info);
status = pjmedia_wav_player_port_create(pool, play_file, wav_ptime,
0, -1, &play_file_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to use file", status);
goto on_exit;
}
status = pjmedia_master_port_create(pool, play_file_port, stream_port,
0, &master_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create master port", status);
goto on_exit;
}
status = pjmedia_master_port_start(master_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Error starting master port", status);
goto on_exit;
}
printf("Playing from WAV file %s..\n", play_file);
} else if (rec_file) {
status = pjmedia_wav_writer_port_create(pool, rec_file,
PJMEDIA_PIA_SRATE(&stream_port->info),
PJMEDIA_PIA_CCNT(&stream_port->info),
PJMEDIA_PIA_SPF(&stream_port->info),
PJMEDIA_PIA_BITS(&stream_port->info),
0, 0, &rec_file_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to use file", status);
goto on_exit;
}
status = pjmedia_master_port_create(pool, stream_port, rec_file_port,
0, &master_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create master port", status);
goto on_exit;
}
status = pjmedia_master_port_start(master_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Error starting master port", status);
goto on_exit;
}
printf("Recording to WAV file %s..\n", rec_file);
} else {
/* Create sound device port. */
if (dir == PJMEDIA_DIR_ENCODING_DECODING)
status = pjmedia_snd_port_create(pool, -1, -1,
PJMEDIA_PIA_SRATE(&stream_port->info),
PJMEDIA_PIA_CCNT(&stream_port->info),
PJMEDIA_PIA_SPF(&stream_port->info),
PJMEDIA_PIA_BITS(&stream_port->info),
0, &snd_port);
else if (dir == PJMEDIA_DIR_ENCODING)
status = pjmedia_snd_port_create_rec(pool, -1,
PJMEDIA_PIA_SRATE(&stream_port->info),
PJMEDIA_PIA_CCNT(&stream_port->info),
PJMEDIA_PIA_SPF(&stream_port->info),
PJMEDIA_PIA_BITS(&stream_port->info),
0, &snd_port);
else
status = pjmedia_snd_port_create_player(pool, -1,
PJMEDIA_PIA_SRATE(&stream_port->info),
PJMEDIA_PIA_CCNT(&stream_port->info),
PJMEDIA_PIA_SPF(&stream_port->info),
PJMEDIA_PIA_BITS(&stream_port->info),
0, &snd_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create sound port", status);
goto on_exit;
}
/* Connect sound port to stream */
status = pjmedia_snd_port_connect( snd_port, stream_port );
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
}
/* Start streaming */
pjmedia_stream_start(stream);
/* Done */
if (dir == PJMEDIA_DIR_DECODING)
printf("Stream is active, dir is recv-only, local port is %d\n",
local_port);
else if (dir == PJMEDIA_DIR_ENCODING)
printf("Stream is active, dir is send-only, sending to %s:%d\n",
pj_inet_ntoa(remote_addr.sin_addr),
pj_ntohs(remote_addr.sin_port));
else
printf("Stream is active, send/recv, local port is %d, "
"sending to %s:%d\n",
local_port,
pj_inet_ntoa(remote_addr.sin_addr),
pj_ntohs(remote_addr.sin_port));
for (;;) {
puts("");
puts("Commands:");
puts(" s Display media statistics");
puts(" q Quit");
puts("");
printf("Command: "); fflush(stdout);
if (fgets(tmp, sizeof(tmp), stdin) == NULL) {
puts("EOF while reading stdin, will quit now..");
break;
}
if (tmp[0] == 's')
print_stream_stat(stream, &codec_param);
else if (tmp[0] == 'q')
break;
}
/* Start deinitialization: */
on_exit:
/* Destroy sound device */
if (snd_port) {
pjmedia_snd_port_destroy( snd_port );
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
}
/* If there is master port, then we just need to destroy master port
* (it will recursively destroy upstream and downstream ports, which
* in this case are file_port and stream_port).
*/
if (master_port) {
pjmedia_master_port_destroy(master_port, PJ_TRUE);
play_file_port = NULL;
stream = NULL;
}
/* Destroy stream */
if (stream) {
pjmedia_transport *tp;
tp = pjmedia_stream_get_transport(stream);
pjmedia_stream_destroy(stream);
pjmedia_transport_close(tp);
}
/* Destroy file ports */
if (play_file_port)
pjmedia_port_destroy( play_file_port );
if (rec_file_port)
pjmedia_port_destroy( rec_file_port );
/* Release application pool */
pj_pool_release( pool );
/* Destroy media endpoint. */
pjmedia_endpt_destroy( med_endpt );
/* Destroy pool factory */
pj_caching_pool_destroy( &cp );
/* Shutdown PJLIB */
pj_shutdown();
return (status == PJ_SUCCESS) ? 0 : 1;
}
int main()
{
pj_caching_pool cp;
pjmedia_endpt *med_endpt;
pj_pool_t *pool;
pjmedia_conf *conf;
int i;
pjmedia_port *sine_port[SINE_COUNT], *null_port, *conf_port;
pjmedia_port *nulls[NULL_COUNT];
unsigned null_slots[NULL_COUNT];
pjmedia_master_port *master_port;
pj_status_t status;
pj_log_set_level(3);
status = pj_init();
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
pool = pj_pool_create( &cp.factory, /* pool factory */
"wav", /* pool name. */
4000, /* init size */
4000, /* increment size */
NULL /* callback on error */
);
status = pjmedia_endpt_create(&cp.factory, NULL, 1, &med_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
status = pjmedia_conf_create( pool,
PORT_COUNT,
CLOCK_RATE,
1, SAMPLES_PER_FRAME, 16,
PJMEDIA_CONF_NO_DEVICE,
&conf);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create conference bridge", status);
return 1;
}
printf("Resampling is %s\n", (HAS_RESAMPLE?"active":"disabled"));
/* Create Null ports */
printf("Creating %d null ports..\n", NULL_COUNT);
for (i=0; i<NULL_COUNT; ++i) {
status = pjmedia_null_port_create(pool, CLOCK_RATE, 1, SAMPLES_PER_FRAME*2, 16, &nulls[i]);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
status = pjmedia_conf_add_port(conf, pool, nulls[i], NULL, &null_slots[i]);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
}
/* Create sine ports. */
printf("Creating %d sine generator ports..\n", SINE_COUNT);
for (i=0; i<SINE_COUNT; ++i) {
unsigned j, slot;
/* Load the WAV file to file port. */
status = create_sine_port(pool, SINE_CLOCK, 1, &sine_port[i]);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Add the file port to conference bridge */
status = pjmedia_conf_add_port( conf, /* The bridge */
pool, /* pool */
sine_port[i], /* port to connect */
NULL, /* Use port's name */
&slot /* ptr for slot # */
);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to add conference port", status);
return 1;
}
status = pjmedia_conf_connect_port(conf, slot, 0, 0);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
for (j=0; j<NULL_COUNT; ++j) {
status = pjmedia_conf_connect_port(conf, slot, null_slots[j], 0);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
}
}
/* Create idle ports */
printf("Creating %d idle ports..\n", IDLE_COUNT);
for (i=0; i<IDLE_COUNT; ++i) {
pjmedia_port *dummy;
status = pjmedia_null_port_create(pool, CLOCK_RATE, 1, SAMPLES_PER_FRAME, 16, &dummy);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
status = pjmedia_conf_add_port(conf, pool, dummy, NULL, NULL);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
}
/* Create null port */
status = pjmedia_null_port_create(pool, CLOCK_RATE, 1, SAMPLES_PER_FRAME, 16,
&null_port);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
conf_port = pjmedia_conf_get_master_port(conf);
/* Create master port */
status = pjmedia_master_port_create(pool, null_port, conf_port, 0, &master_port);
pjmedia_master_port_start(master_port);
puts("Waiting to settle.."); fflush(stdout);
pj_thread_sleep(5000);
benchmark();
/* Done. */
return 0;
}
int main(int argc, char *argv[])
{
pj_caching_pool cp;
pjmedia_endpt *med_endpt;
pj_pool_t *pool;
pjmedia_port *file_port;
pjmedia_port *resample_port;
pjmedia_snd_port *snd_port;
char tmp[10];
pj_status_t status;
int dev_id = -1;
int sampling_rate = CLOCK_RATE;
int channel_count = NCHANNELS;
int samples_per_frame = NSAMPLES;
int bits_per_sample = NBITS;
//int ptime;
//int down_samples;
/* Must init PJLIB first: */
status = pj_init();
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Get options */
if (get_snd_options(THIS_FILE, argc, argv, &dev_id, &sampling_rate,
&channel_count, &samples_per_frame, &bits_per_sample))
{
puts("");
puts(desc);
return 1;
}
if (!argv[pj_optind]) {
puts("Error: no file is specified");
puts(desc);
return 1;
}
/* Must create a pool factory before we can allocate any memory. */
pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
/*
* Initialize media endpoint.
* This will implicitly initialize PJMEDIA too.
*/
status = pjmedia_endpt_create(&cp.factory, NULL, 1, &med_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Create memory pool for our file player */
pool = pj_pool_create( &cp.factory, /* pool factory */
"app", /* pool name. */
4000, /* init size */
4000, /* increment size */
NULL /* callback on error */
);
/* Create the file port. */
status = pjmedia_wav_player_port_create( pool, argv[pj_optind], 0, 0,
0, &file_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to open file", status);
return 1;
}
/* File must have same number of channels. */
if (PJMEDIA_PIA_CCNT(&file_port->info) != (unsigned)channel_count) {
PJ_LOG(3,(THIS_FILE, "Error: file has different number of channels. "
"Perhaps you'd need -c option?"));
pjmedia_port_destroy(file_port);
return 1;
}
/* Calculate number of samples per frame to be taken from file port */
//ptime = samples_per_frame * 1000 / sampling_rate;
/* Create the resample port. */
status = pjmedia_resample_port_create( pool, file_port,
sampling_rate, 0,
&resample_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to create resample port", status);
return 1;
}
/* Create sound player port. */
status = pjmedia_snd_port_create(
pool, /* pool */
dev_id, /* device */
dev_id, /* device */
sampling_rate, /* clock rate. */
channel_count, /* # of channels. */
samples_per_frame, /* samples per frame. */
bits_per_sample, /* bits per sample. */
0, /* options */
&snd_port /* returned port */
);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Unable to open sound device", status);
return 1;
}
/* Connect resample port to sound device */
status = pjmedia_snd_port_connect( snd_port, resample_port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Error connecting sound ports", status);
return 1;
}
/* Dump memory usage */
dump_pool_usage(THIS_FILE, &cp);
/*
* File should be playing and looping now, using sound device's thread.
*/
/* Sleep to allow log messages to flush */
pj_thread_sleep(100);
printf("Playing %s at sampling rate %d (original file sampling rate=%d)\n",
argv[pj_optind], sampling_rate,
PJMEDIA_PIA_SRATE(&file_port->info));
puts("");
puts("Press <ENTER> to stop playing and quit");
if (fgets(tmp, sizeof(tmp), stdin) == NULL) {
puts("EOF while reading stdin, will quit now..");
}
/* Start deinitialization: */
/* Destroy sound device */
status = pjmedia_snd_port_destroy( snd_port );
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Destroy resample port.
* This will destroy all downstream ports (e.g. the file port)
*/
status = pjmedia_port_destroy( resample_port );
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Release application pool */
pj_pool_release( pool );
/* Destroy media endpoint. */
pjmedia_endpt_destroy( med_endpt );
/* Destroy pool factory */
pj_caching_pool_destroy( &cp );
/* Shutdown PJLIB */
pj_shutdown();
/* Done. */
return 0;
}
/*
* main()
*/
int main(int argc, char *argv[])
{
pj_caching_pool cp;
pjmedia_endpt *med_endpt;
pj_pool_t *pool;
pjmedia_vid_stream *stream = NULL;
pjmedia_port *enc_port, *dec_port;
pj_status_t status;
pjmedia_vid_port *capture=NULL, *renderer=NULL;
pjmedia_vid_port_param vpp;
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
/* SRTP variables */
pj_bool_t use_srtp = PJ_FALSE;
char tmp_tx_key[64];
char tmp_rx_key[64];
pj_str_t srtp_tx_key = {NULL, 0};
pj_str_t srtp_rx_key = {NULL, 0};
pj_str_t srtp_crypto_suite = {NULL, 0};
int tmp_key_len;
#endif
/* Default values */
const pjmedia_vid_codec_info *codec_info;
pjmedia_vid_codec_param codec_param;
pjmedia_dir dir = PJMEDIA_DIR_DECODING;
pj_sockaddr_in remote_addr;
pj_uint16_t local_port = 4000;
char *codec_id = NULL;
pjmedia_rect_size tx_size = {0};
pj_int8_t rx_pt = -1, tx_pt = -1;
play_file_data play_file = { NULL };
pjmedia_port *play_port = NULL;
pjmedia_vid_codec *play_decoder = NULL;
pjmedia_clock *play_clock = NULL;
enum {
OPT_CODEC = 'c',
OPT_LOCAL_PORT = 'p',
OPT_REMOTE = 'r',
OPT_PLAY_FILE = 'f',
OPT_SEND_RECV = 'b',
OPT_SEND_ONLY = 's',
OPT_RECV_ONLY = 'i',
OPT_SEND_WIDTH = 'W',
OPT_SEND_HEIGHT = 'H',
OPT_RECV_PT = 't',
OPT_SEND_PT = 'T',
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
OPT_USE_SRTP = 'S',
#endif
OPT_SRTP_TX_KEY = 'x',
OPT_SRTP_RX_KEY = 'y',
OPT_HELP = 'h',
};
struct pj_getopt_option long_options[] = {
{ "codec", 1, 0, OPT_CODEC },
{ "local-port", 1, 0, OPT_LOCAL_PORT },
{ "remote", 1, 0, OPT_REMOTE },
{ "play-file", 1, 0, OPT_PLAY_FILE },
{ "send-recv", 0, 0, OPT_SEND_RECV },
{ "send-only", 0, 0, OPT_SEND_ONLY },
{ "recv-only", 0, 0, OPT_RECV_ONLY },
{ "send-width", 1, 0, OPT_SEND_WIDTH },
{ "send-height", 1, 0, OPT_SEND_HEIGHT },
{ "recv-pt", 1, 0, OPT_RECV_PT },
{ "send-pt", 1, 0, OPT_SEND_PT },
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
{ "use-srtp", 2, 0, OPT_USE_SRTP },
{ "srtp-tx-key", 1, 0, OPT_SRTP_TX_KEY },
{ "srtp-rx-key", 1, 0, OPT_SRTP_RX_KEY },
#endif
{ "help", 0, 0, OPT_HELP },
{ NULL, 0, 0, 0 },
};
int c;
int option_index;
pj_bzero(&remote_addr, sizeof(remote_addr));
/* init PJLIB : */
status = pj_init();
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Parse arguments */
pj_optind = 0;
while((c=pj_getopt_long(argc,argv, "h", long_options, &option_index))!=-1)
{
switch (c) {
case OPT_CODEC:
codec_id = pj_optarg;
break;
case OPT_LOCAL_PORT:
local_port = (pj_uint16_t) atoi(pj_optarg);
if (local_port < 1) {
printf("Error: invalid local port %s\n", pj_optarg);
return 1;
}
break;
case OPT_REMOTE:
{
pj_str_t ip = pj_str(strtok(pj_optarg, ":"));
pj_uint16_t port = (pj_uint16_t) atoi(strtok(NULL, ":"));
status = pj_sockaddr_in_init(&remote_addr, &ip, port);
if (status != PJ_SUCCESS) {
app_perror(THIS_FILE, "Invalid remote address", status);
return 1;
}
}
break;
case OPT_PLAY_FILE:
play_file.file_name = pj_optarg;
break;
case OPT_SEND_RECV:
dir = PJMEDIA_DIR_ENCODING_DECODING;
break;
case OPT_SEND_ONLY:
dir = PJMEDIA_DIR_ENCODING;
break;
case OPT_RECV_ONLY:
dir = PJMEDIA_DIR_DECODING;
break;
case OPT_SEND_WIDTH:
tx_size.w = (unsigned)atoi(pj_optarg);
break;
case OPT_SEND_HEIGHT:
tx_size.h = (unsigned)atoi(pj_optarg);
break;
case OPT_RECV_PT:
rx_pt = (pj_int8_t)atoi(pj_optarg);
break;
case OPT_SEND_PT:
tx_pt = (pj_int8_t)atoi(pj_optarg);
break;
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
case OPT_USE_SRTP:
use_srtp = PJ_TRUE;
if (pj_optarg) {
pj_strset(&srtp_crypto_suite, pj_optarg, strlen(pj_optarg));
} else {
srtp_crypto_suite = pj_str("AES_CM_128_HMAC_SHA1_80");
}
break;
case OPT_SRTP_TX_KEY:
tmp_key_len = hex_string_to_octet_string(tmp_tx_key, pj_optarg,
strlen(pj_optarg));
pj_strset(&srtp_tx_key, tmp_tx_key, tmp_key_len/2);
break;
case OPT_SRTP_RX_KEY:
tmp_key_len = hex_string_to_octet_string(tmp_rx_key, pj_optarg,
strlen(pj_optarg));
pj_strset(&srtp_rx_key, tmp_rx_key, tmp_key_len/2);
break;
#endif
case OPT_HELP:
usage();
return 1;
default:
printf("Invalid options %s\n", argv[pj_optind]);
return 1;
}
}
/* Verify arguments. */
if (dir & PJMEDIA_DIR_ENCODING) {
if (remote_addr.sin_addr.s_addr == 0) {
printf("Error: remote address must be set\n");
return 1;
}
}
if (play_file.file_name != NULL && dir != PJMEDIA_DIR_ENCODING) {
printf("Direction is set to --send-only because of --play-file\n");
dir = PJMEDIA_DIR_ENCODING;
}
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
/* SRTP validation */
if (use_srtp) {
if (!srtp_tx_key.slen || !srtp_rx_key.slen)
{
printf("Error: Key for each SRTP stream direction must be set\n");
return 1;
}
}
#endif
/* Must create a pool factory before we can allocate any memory. */
pj_caching_pool_init(&cp, &pj_pool_factory_default_policy, 0);
/*
* Initialize media endpoint.
* This will implicitly initialize PJMEDIA too.
*/
status = pjmedia_endpt_create(&cp.factory, NULL, 1, &med_endpt);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Create memory pool for application purpose */
pool = pj_pool_create( &cp.factory, /* pool factory */
"app", /* pool name. */
4000, /* init size */
4000, /* increment size */
NULL /* callback on error */
);
/* Init video format manager */
pjmedia_video_format_mgr_create(pool, 64, 0, NULL);
/* Init video converter manager */
pjmedia_converter_mgr_create(pool, NULL);
/* Init event manager */
pjmedia_event_mgr_create(pool, 0, NULL);
/* Init video codec manager */
pjmedia_vid_codec_mgr_create(pool, NULL);
/* Init video subsystem */
pjmedia_vid_dev_subsys_init(&cp.factory);
/* Register all supported codecs */
status = init_codecs(&cp.factory);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Find which codec to use. */
if (codec_id) {
unsigned count = 1;
pj_str_t str_codec_id = pj_str(codec_id);
status = pjmedia_vid_codec_mgr_find_codecs_by_id(NULL,
&str_codec_id, &count,
&codec_info, NULL);
if (status != PJ_SUCCESS) {
printf("Error: unable to find codec %s\n", codec_id);
return 1;
}
} else {
static pjmedia_vid_codec_info info[1];
unsigned count = PJ_ARRAY_SIZE(info);
/* Default to first codec */
pjmedia_vid_codec_mgr_enum_codecs(NULL, &count, info, NULL);
codec_info = &info[0];
}
/* Get codec default param for info */
status = pjmedia_vid_codec_mgr_get_default_param(NULL, codec_info,
&codec_param);
pj_assert(status == PJ_SUCCESS);
/* Set outgoing video size */
if (tx_size.w && tx_size.h)
codec_param.enc_fmt.det.vid.size = tx_size;
#if DEF_RENDERER_WIDTH && DEF_RENDERER_HEIGHT
/* Set incoming video size */
if (DEF_RENDERER_WIDTH > codec_param.dec_fmt.det.vid.size.w)
codec_param.dec_fmt.det.vid.size.w = DEF_RENDERER_WIDTH;
if (DEF_RENDERER_HEIGHT > codec_param.dec_fmt.det.vid.size.h)
codec_param.dec_fmt.det.vid.size.h = DEF_RENDERER_HEIGHT;
#endif
if (play_file.file_name) {
pjmedia_video_format_detail *file_vfd;
pjmedia_clock_param clock_param;
char fmt_name[5];
/* Create file player */
status = create_file_player(pool, play_file.file_name, &play_port);
if (status != PJ_SUCCESS)
goto on_exit;
/* Collect format info */
file_vfd = pjmedia_format_get_video_format_detail(&play_port->info.fmt,
PJ_TRUE);
PJ_LOG(2, (THIS_FILE, "Reading video stream %dx%d %s @%.2ffps",
file_vfd->size.w, file_vfd->size.h,
pjmedia_fourcc_name(play_port->info.fmt.id, fmt_name),
(1.0*file_vfd->fps.num/file_vfd->fps.denum)));
/* Allocate file read buffer */
play_file.read_buf_size = PJMEDIA_MAX_VIDEO_ENC_FRAME_SIZE;
play_file.read_buf = pj_pool_zalloc(pool, play_file.read_buf_size);
/* Create decoder, if the file and the stream uses different codec */
if (codec_info->fmt_id != (pjmedia_format_id)play_port->info.fmt.id) {
const pjmedia_video_format_info *dec_vfi;
pjmedia_video_apply_fmt_param dec_vafp = {0};
const pjmedia_vid_codec_info *codec_info2;
pjmedia_vid_codec_param codec_param2;
/* Find decoder */
status = pjmedia_vid_codec_mgr_get_codec_info2(NULL,
play_port->info.fmt.id,
&codec_info2);
if (status != PJ_SUCCESS)
goto on_exit;
/* Init decoder */
status = pjmedia_vid_codec_mgr_alloc_codec(NULL, codec_info2,
&play_decoder);
if (status != PJ_SUCCESS)
goto on_exit;
status = play_decoder->op->init(play_decoder, pool);
if (status != PJ_SUCCESS)
goto on_exit;
/* Open decoder */
status = pjmedia_vid_codec_mgr_get_default_param(NULL, codec_info2,
&codec_param2);
if (status != PJ_SUCCESS)
goto on_exit;
codec_param2.dir = PJMEDIA_DIR_DECODING;
status = play_decoder->op->open(play_decoder, &codec_param2);
if (status != PJ_SUCCESS)
goto on_exit;
/* Get decoder format info and apply param */
dec_vfi = pjmedia_get_video_format_info(NULL,
codec_info2->dec_fmt_id[0]);
if (!dec_vfi || !dec_vfi->apply_fmt) {
status = PJ_ENOTSUP;
goto on_exit;
}
dec_vafp.size = file_vfd->size;
(*dec_vfi->apply_fmt)(dec_vfi, &dec_vafp);
/* Allocate buffer to receive decoder output */
play_file.dec_buf_size = dec_vafp.framebytes;
play_file.dec_buf = pj_pool_zalloc(pool, play_file.dec_buf_size);
}
/* Create player clock */
clock_param.usec_interval = PJMEDIA_PTIME(&file_vfd->fps);
clock_param.clock_rate = codec_info->clock_rate;
status = pjmedia_clock_create2(pool, &clock_param,
PJMEDIA_CLOCK_NO_HIGHEST_PRIO,
&clock_cb, &play_file, &play_clock);
if (status != PJ_SUCCESS)
goto on_exit;
/* Override stream codec param for encoding direction */
codec_param.enc_fmt.det.vid.size = file_vfd->size;
codec_param.enc_fmt.det.vid.fps = file_vfd->fps;
} else {
pjmedia_vid_port_param_default(&vpp);
/* Set as active for all video devices */
vpp.active = PJ_TRUE;
/* Create video device port. */
if (dir & PJMEDIA_DIR_ENCODING) {
/* Create capture */
status = pjmedia_vid_dev_default_param(
pool,
PJMEDIA_VID_DEFAULT_CAPTURE_DEV,
&vpp.vidparam);
if (status != PJ_SUCCESS)
goto on_exit;
pjmedia_format_copy(&vpp.vidparam.fmt, &codec_param.enc_fmt);
vpp.vidparam.fmt.id = codec_param.dec_fmt.id;
vpp.vidparam.dir = PJMEDIA_DIR_CAPTURE;
status = pjmedia_vid_port_create(pool, &vpp, &capture);
if (status != PJ_SUCCESS)
goto on_exit;
}
if (dir & PJMEDIA_DIR_DECODING) {
/* Create renderer */
status = pjmedia_vid_dev_default_param(
pool,
PJMEDIA_VID_DEFAULT_RENDER_DEV,
&vpp.vidparam);
if (status != PJ_SUCCESS)
goto on_exit;
pjmedia_format_copy(&vpp.vidparam.fmt, &codec_param.dec_fmt);
vpp.vidparam.dir = PJMEDIA_DIR_RENDER;
vpp.vidparam.disp_size = vpp.vidparam.fmt.det.vid.size;
vpp.vidparam.flags |= PJMEDIA_VID_DEV_CAP_OUTPUT_WINDOW_FLAGS;
vpp.vidparam.window_flags = PJMEDIA_VID_DEV_WND_BORDER |
PJMEDIA_VID_DEV_WND_RESIZABLE;
status = pjmedia_vid_port_create(pool, &vpp, &renderer);
if (status != PJ_SUCCESS)
goto on_exit;
}
}
/* Set to ignore fmtp */
codec_param.ignore_fmtp = PJ_TRUE;
/* Create stream based on program arguments */
status = create_stream(pool, med_endpt, codec_info, &codec_param,
dir, rx_pt, tx_pt, local_port, &remote_addr,
#if defined(PJMEDIA_HAS_SRTP) && (PJMEDIA_HAS_SRTP != 0)
use_srtp, &srtp_crypto_suite,
&srtp_tx_key, &srtp_rx_key,
#endif
&stream);
if (status != PJ_SUCCESS)
goto on_exit;
/* Get the port interface of the stream */
status = pjmedia_vid_stream_get_port(stream, PJMEDIA_DIR_ENCODING,
&enc_port);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
status = pjmedia_vid_stream_get_port(stream, PJMEDIA_DIR_DECODING,
&dec_port);
PJ_ASSERT_RETURN(status == PJ_SUCCESS, 1);
/* Start streaming */
status = pjmedia_vid_stream_start(stream);
if (status != PJ_SUCCESS)
goto on_exit;
/* Start renderer */
if (renderer) {
status = pjmedia_vid_port_connect(renderer, dec_port, PJ_FALSE);
if (status != PJ_SUCCESS)
goto on_exit;
status = pjmedia_vid_port_start(renderer);
if (status != PJ_SUCCESS)
goto on_exit;
}
/* Start capture */
if (capture) {
status = pjmedia_vid_port_connect(capture, enc_port, PJ_FALSE);
if (status != PJ_SUCCESS)
goto on_exit;
status = pjmedia_vid_port_start(capture);
if (status != PJ_SUCCESS)
goto on_exit;
}
/* Start playing file */
if (play_file.file_name) {
#if HAS_LOCAL_RENDERER_FOR_PLAY_FILE
/* Create local renderer */
pjmedia_vid_port_param_default(&vpp);
vpp.active = PJ_FALSE;
status = pjmedia_vid_dev_default_param(
pool,
PJMEDIA_VID_DEFAULT_RENDER_DEV,
&vpp.vidparam);
if (status != PJ_SUCCESS)
goto on_exit;
vpp.vidparam.dir = PJMEDIA_DIR_RENDER;
pjmedia_format_copy(&vpp.vidparam.fmt, &codec_param.dec_fmt);
vpp.vidparam.fmt.det.vid.size = play_port->info.fmt.det.vid.size;
vpp.vidparam.fmt.det.vid.fps = play_port->info.fmt.det.vid.fps;
vpp.vidparam.disp_size = vpp.vidparam.fmt.det.vid.size;
status = pjmedia_vid_port_create(pool, &vpp, &renderer);
if (status != PJ_SUCCESS)
goto on_exit;
status = pjmedia_vid_port_start(renderer);
if (status != PJ_SUCCESS)
goto on_exit;
#endif
/* Init play file data */
play_file.play_port = play_port;
play_file.stream_port = enc_port;
play_file.decoder = play_decoder;
if (renderer) {
play_file.renderer = pjmedia_vid_port_get_passive_port(renderer);
}
status = pjmedia_clock_start(play_clock);
if (status != PJ_SUCCESS)
goto on_exit;
}
/* Done */
if (dir == PJMEDIA_DIR_DECODING)
printf("Stream is active, dir is recv-only, local port is %d\n",
local_port);
else if (dir == PJMEDIA_DIR_ENCODING)
printf("Stream is active, dir is send-only, sending to %s:%d\n",
pj_inet_ntoa(remote_addr.sin_addr),
pj_ntohs(remote_addr.sin_port));
else
printf("Stream is active, send/recv, local port is %d, "
"sending to %s:%d\n",
local_port,
pj_inet_ntoa(remote_addr.sin_addr),
pj_ntohs(remote_addr.sin_port));
if (dir & PJMEDIA_DIR_ENCODING)
PJ_LOG(2, (THIS_FILE, "Sending %dx%d %.*s @%.2ffps",
codec_param.enc_fmt.det.vid.size.w,
codec_param.enc_fmt.det.vid.size.h,
codec_info->encoding_name.slen,
codec_info->encoding_name.ptr,
(1.0*codec_param.enc_fmt.det.vid.fps.num/
codec_param.enc_fmt.det.vid.fps.denum)));
for (;;) {
char tmp[10];
puts("");
puts("Commands:");
puts(" q Quit");
puts("");
printf("Command: "); fflush(stdout);
if (fgets(tmp, sizeof(tmp), stdin) == NULL) {
puts("EOF while reading stdin, will quit now..");
break;
}
if (tmp[0] == 'q')
break;
}
/* Start deinitialization: */
on_exit:
/* Stop and destroy file clock */
if (play_clock) {
pjmedia_clock_stop(play_clock);
pjmedia_clock_destroy(play_clock);
}
/* Destroy file reader/player */
if (play_port)
pjmedia_port_destroy(play_port);
/* Destroy file decoder */
if (play_decoder) {
play_decoder->op->close(play_decoder);
pjmedia_vid_codec_mgr_dealloc_codec(NULL, play_decoder);
}
/* Destroy video devices */
if (capture)
pjmedia_vid_port_destroy(capture);
if (renderer)
pjmedia_vid_port_destroy(renderer);
/* Destroy stream */
if (stream) {
pjmedia_transport *tp;
tp = pjmedia_vid_stream_get_transport(stream);
pjmedia_vid_stream_destroy(stream);
pjmedia_transport_close(tp);
}
/* Deinit codecs */
deinit_codecs();
/* Shutdown video subsystem */
pjmedia_vid_dev_subsys_shutdown();
/* Destroy event manager */
pjmedia_event_mgr_destroy(NULL);
/* Release application pool */
pj_pool_release( pool );
/* Destroy media endpoint. */
pjmedia_endpt_destroy( med_endpt );
/* Destroy pool factory */
pj_caching_pool_destroy( &cp );
/* Shutdown PJLIB */
pj_shutdown();
return (status == PJ_SUCCESS) ? 0 : 1;
}
int regc_test(void)
{
struct test_rec {
unsigned check_contact;
unsigned add_xuid_param;
const char *title;
char *alt_registrar;
unsigned contact_cnt;
char *contacts[4];
unsigned expires;
struct registrar_cfg server_cfg;
struct client client_cfg;
} test_rec[] =
{
/* immediate error */
{
OFF, /* check_contact */
OFF, /* add_xuid_param */
"immediate error", /* title */
"sip:unresolved-host-xyy", /* alt_registrar */
1, /* contact cnt */
{ "sip:[email protected]:5060" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_FALSE, 200, PJ_FALSE, NONE, 0, 0, {NULL, 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 502, PJ_FALSE, 600, 0, PJ_FALSE}
},
/* timeout test */
{
OFF, /* check_contact */
OFF, /* add_xuid_param */
"timeout test (takes ~32 secs)",/* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "sip:[email protected]:5060" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_FALSE, 200, PJ_FALSE, NONE, 0, 0, {NULL, 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth? */
{ PJ_FALSE, 408, PJ_FALSE, 600, 0, PJ_FALSE}
},
/* Basic successful registration scenario:
* a good registrar returns the Contact header as is and
* add expires parameter. In this test no additional bindings
* are returned.
*/
{
ON_OFF, /* check_contact */
ON_OFF, /* add_xuid_param */
"basic", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060;transport=udp;x-param=1234>" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 200, PJ_FALSE, EXACT, 75, 65, {NULL, 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 200, PJ_TRUE, 75, 1, PJ_FALSE}
},
/* Basic successful registration scenario with authentication
*/
{
ON_OFF, /* check_contact */
ON_OFF, /* add_xuid_param */
"authentication", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060;transport=udp;x-param=1234>" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 200, PJ_TRUE, EXACT, 75, 65, {NULL, 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 200, PJ_TRUE, 75, 1, PJ_TRUE}
},
/* a good registrar returns the Contact header as is and
* add expires parameter. Also it adds bindings from other
* clients in this test.
*/
{
ON_OFF, /* check_contact */
ON, /* add_xuid_param */
"more bindings in response", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060;transport=udp>" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 200, PJ_FALSE, EXACT, 75, 65, {"<sip:a@a>;expires=70", 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 200, PJ_TRUE, 75, 2, PJ_FALSE}
},
/* a bad registrar returns modified Contact header, but it
* still returns all parameters intact. In this case
* the expiration is taken from the expires param because
* of matching xuid param or because the number of
* Contact header matches.
*/
{
ON_OFF, /* check_contact */
ON_OFF, /* add_xuid_param */
"registrar modifies Contact header", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060>" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 200, PJ_FALSE, MODIFIED, 75, 65, {NULL, 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 200, PJ_TRUE, 75, 1, PJ_FALSE}
},
/* a bad registrar returns modified Contact header, but it
* still returns all parameters intact. In addition it returns
* bindings from other clients.
*
* In this case the expiration is taken from the expires param
* because add_xuid_param is enabled.
*/
{
ON_OFF, /* check_contact */
ON, /* add_xuid_param */
"registrar modifies Contact header and add bindings", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060>" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 200, PJ_FALSE, MODIFIED, 75, 65, {"<sip:a@a>;expires=70", 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 200, PJ_TRUE, 75, 2, PJ_FALSE}
},
/* a bad registrar returns completely different Contact and
* all parameters are gone. In this case the expiration is
* also taken from the expires param since the number of
* header matches.
*/
{
ON_OFF, /* check_contact */
ON_OFF, /* add_xuid_param */
"registrar replaces Contact header", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060>" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 202, PJ_FALSE, NONE, 0, 65, {"<sip:a@A>;expires=75", 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 202, PJ_TRUE, 75, 1, PJ_FALSE}
},
/* a bad registrar returns completely different Contact (and
* all parameters are gone) and it also includes bindings from
* other clients.
* In this case the expiration is taken from the Expires header.
*/
{
ON_OFF, /* check_contact */
ON_OFF, /* add_xuid_param */
" as above with additional bindings", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060>" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 200, PJ_FALSE, NONE, 0, 65, {"<sip:a@A>;expires=75, <sip:b@B;expires=70>", 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 200, PJ_TRUE, 65, 2, PJ_FALSE}
},
/* the registrar doesn't return any bindings, but for some
* reason it includes an Expires header.
* In this case the expiration is taken from the Expires header.
*/
{
ON_OFF, /* check_contact */
ON_OFF, /* add_xuid_param */
"no Contact but with Expires", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060>" }, /* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 200, PJ_FALSE, NONE, 0, 65, {NULL, 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 200, PJ_TRUE, 65, 0, PJ_FALSE}
},
/* Neither Contact header nor Expires header are present.
* In this case the expiration is taken from the request.
*/
{
ON_OFF, /* check_contact */
ON_OFF, /* add_xuid_param */
"no Contact and no Expires", /* title */
NULL, /* alt_registrar */
1, /* contact cnt */
{ "<sip:[email protected]:5060>" },/* contacts[] */
600, /* expires */
/* registrar config: */
/* respond code auth contact exp_prm expires more_contacts */
{ PJ_TRUE, 200, PJ_FALSE, NONE, 0, 0, {NULL, 0}},
/* client expected results: */
/* error code have_reg expiration contact_cnt auth?*/
{ PJ_FALSE, 200, PJ_TRUE, 600, 0, PJ_FALSE}
},
};
unsigned i;
pj_sockaddr_in addr;
pjsip_transport *udp = NULL;
pj_uint16_t port;
char registrar_uri_buf[80];
pj_str_t registrar_uri;
int rc = 0;
pj_sockaddr_in_init(&addr, 0, 0);
/* Acquire existing transport, if any */
rc = pjsip_endpt_acquire_transport(endpt, PJSIP_TRANSPORT_UDP, &addr, sizeof(addr), NULL, &udp);
if (rc == PJ_SUCCESS) {
port = pj_sockaddr_get_port(&udp->local_addr);
pjsip_transport_dec_ref(udp);
udp = NULL;
} else {
rc = pjsip_udp_transport_start(endpt, NULL, NULL, 1, &udp);
if (rc != PJ_SUCCESS) {
app_perror(" error creating UDP transport", rc);
rc = -2;
goto on_return;
}
port = pj_sockaddr_get_port(&udp->local_addr);
}
/* Register registrar module */
rc = pjsip_endpt_register_module(endpt, ®istrar.mod);
if (rc != PJ_SUCCESS) {
app_perror(" error registering module", rc);
rc = -3;
goto on_return;
}
/* Register send module */
rc = pjsip_endpt_register_module(endpt, &send_mod.mod);
if (rc != PJ_SUCCESS) {
app_perror(" error registering module", rc);
rc = -3;
goto on_return;
}
pj_ansi_snprintf(registrar_uri_buf, sizeof(registrar_uri_buf),
"sip:127.0.0.1:%d", (int)port);
registrar_uri = pj_str(registrar_uri_buf);
for (i=0; i<PJ_ARRAY_SIZE(test_rec); ++i) {
struct test_rec *t = &test_rec[i];
unsigned j, x;
pj_str_t reg_uri;
pj_str_t contacts[8];
/* Fill in the registrar address if it's not specified */
if (t->alt_registrar == NULL) {
reg_uri = registrar_uri;
} else {
reg_uri = pj_str(t->alt_registrar);
}
/* Build contact pj_str_t's */
for (j=0; j<t->contact_cnt; ++j) {
contacts[j] = pj_str(t->contacts[j]);
}
/* Normalize more_contacts field */
if (t->server_cfg.more_contacts.ptr)
t->server_cfg.more_contacts.slen = strlen(t->server_cfg.more_contacts.ptr);
/* Do tests with three combinations:
* - check_contact on/off
* - add_xuid_param on/off
* - destroy_on_callback on/off
*/
for (x=1; x<=2; ++x) {
unsigned y;
if ((t->check_contact & x) == 0)
continue;
pjsip_cfg()->regc.check_contact = (x-1);
for (y=1; y<=2; ++y) {
unsigned z;
if ((t->add_xuid_param & y) == 0)
continue;
pjsip_cfg()->regc.add_xuid_param = (y-1);
for (z=0; z<=1; ++z) {
char new_title[200];
t->client_cfg.destroy_on_cb = z;
sprintf(new_title, "%s [check=%d, xuid=%d, destroy=%d]",
t->title, pjsip_cfg()->regc.check_contact,
pjsip_cfg()->regc.add_xuid_param, z);
rc = do_test(new_title, &t->server_cfg, &t->client_cfg,
®_uri, t->contact_cnt, contacts,
t->expires, PJ_FALSE, NULL);
if (rc != 0)
goto on_return;
}
}
}
/* Sleep between test groups to avoid using up too many
* active transactions.
*/
pj_thread_sleep(1000);
}
/* keep-alive test */
rc = keep_alive_test(®istrar_uri);
if (rc != 0)
goto on_return;
/* Send error on refresh without destroy on callback */
rc = refresh_error(®istrar_uri, PJ_FALSE);
if (rc != 0)
goto on_return;
/* Send error on refresh, destroy on callback */
rc = refresh_error(®istrar_uri, PJ_TRUE);
if (rc != 0)
goto on_return;
/* Updating contact */
rc = update_test(®istrar_uri);
if (rc != 0)
goto on_return;
/* Send error during auth, don't destroy on callback */
rc = auth_send_error(®istrar_uri, PJ_FALSE);
if (rc != 0)
goto on_return;
/* Send error during auth, destroy on callback */
rc = auth_send_error(®istrar_uri, PJ_FALSE);
if (rc != 0)
goto on_return;
on_return:
if (registrar.mod.id != -1) {
pjsip_endpt_unregister_module(endpt, ®istrar.mod);
}
if (send_mod.mod.id != -1) {
pjsip_endpt_unregister_module(endpt, &send_mod.mod);
}
if (udp) {
pjsip_transport_dec_ref(udp);
}
return rc;
}
int test_main(void)
{
pj_status_t rc;
pj_caching_pool caching_pool;
const char *filename;
unsigned tsx_test_cnt=0;
struct tsx_test_param tsx_test[10];
pj_status_t status;
#if INCLUDE_TSX_TEST
unsigned i;
pjsip_transport *tp;
#if PJ_HAS_TCP
pjsip_tpfactory *tpfactory;
#endif /* PJ_HAS_TCP */
#endif /* INCLUDE_TSX_TEST */
int line;
pj_log_set_level(log_level);
pj_log_set_decor(param_log_decor);
if ((rc=pj_init()) != PJ_SUCCESS) {
app_perror("pj_init", rc);
return rc;
}
if ((rc=pjlib_util_init()) != PJ_SUCCESS) {
app_perror("pj_init", rc);
return rc;
}
status = init_report();
if (status != PJ_SUCCESS)
return status;
pj_dump_config();
pj_caching_pool_init( &caching_pool, &pj_pool_factory_default_policy,
PJSIP_TEST_MEM_SIZE );
rc = pjsip_endpt_create(&caching_pool.factory, "endpt", &endpt);
if (rc != PJ_SUCCESS) {
app_perror("pjsip_endpt_create", rc);
pj_caching_pool_destroy(&caching_pool);
return rc;
}
PJ_LOG(3,(THIS_FILE,""));
/* Init logger module. */
init_msg_logger();
msg_logger_set_enabled(1);
/* Start transaction layer module. */
rc = pjsip_tsx_layer_init_module(endpt);
if (rc != PJ_SUCCESS) {
app_perror(" Error initializing transaction module", rc);
goto on_return;
}
/* Create loop transport. */
rc = pjsip_loop_start(endpt, NULL);
if (rc != PJ_SUCCESS) {
app_perror(" error: unable to create datagram loop transport",
rc);
goto on_return;
}
tsx_test[tsx_test_cnt].port = 5060;
tsx_test[tsx_test_cnt].tp_type = "loop-dgram";
tsx_test[tsx_test_cnt].type = PJSIP_TRANSPORT_LOOP_DGRAM;
++tsx_test_cnt;
#if INCLUDE_URI_TEST
DO_TEST(uri_test());
#endif
#if INCLUDE_MSG_TEST
DO_TEST(msg_test());
DO_TEST(msg_err_test());
#endif
#if INCLUDE_MULTIPART_TEST
DO_TEST(multipart_test());
#endif
#if INCLUDE_TXDATA_TEST
DO_TEST(txdata_test());
#endif
#if INCLUDE_TSX_BENCH
DO_TEST(tsx_bench());
#endif
#if INCLUDE_UDP_TEST
DO_TEST(transport_udp_test());
#endif
#if INCLUDE_LOOP_TEST
DO_TEST(transport_loop_test());
#endif
#if INCLUDE_TCP_TEST
DO_TEST(transport_tcp_test());
#endif
#if INCLUDE_RESOLVE_TEST
DO_TEST(resolve_test());
#endif
#if INCLUDE_TSX_TEST
status = pjsip_udp_transport_start(endpt, NULL, NULL, 1, &tp);
if (status == PJ_SUCCESS) {
tsx_test[tsx_test_cnt].port = tp->local_name.port;
tsx_test[tsx_test_cnt].tp_type = "udp";
tsx_test[tsx_test_cnt].type = PJSIP_TRANSPORT_UDP;
++tsx_test_cnt;
}
#if PJ_HAS_TCP
status = pjsip_tcp_transport_start(endpt, NULL, 1, &tpfactory);
if (status == PJ_SUCCESS) {
tsx_test[tsx_test_cnt].port = tpfactory->addr_name.port;
tsx_test[tsx_test_cnt].tp_type = "tcp";
tsx_test[tsx_test_cnt].type = PJSIP_TRANSPORT_TCP;
++tsx_test_cnt;
} else {
app_perror("Unable to create TCP", status);
rc = -4;
goto on_return;
}
#endif
for (i=0; i<tsx_test_cnt; ++i) {
DO_TSX_TEST(tsx_basic_test, &tsx_test[i]);
DO_TSX_TEST(tsx_uac_test, &tsx_test[i]);
DO_TSX_TEST(tsx_uas_test, &tsx_test[i]);
}
#endif
#if INCLUDE_INV_OA_TEST
DO_TEST(inv_offer_answer_test());
#endif
#if INCLUDE_REGC_TEST
DO_TEST(regc_test());
#endif
on_return:
flush_events(500);
/* Dumping memory pool usage */
PJ_LOG(3,(THIS_FILE, "Peak memory size=%u MB",
caching_pool.peak_used_size / 1000000));
pjsip_endpt_destroy(endpt);
pj_caching_pool_destroy(&caching_pool);
PJ_LOG(3,(THIS_FILE, ""));
pj_thread_get_stack_info(pj_thread_this(), &filename, &line);
PJ_LOG(3,(THIS_FILE, "Stack max usage: %u, deepest: %s:%u",
pj_thread_get_stack_max_usage(pj_thread_this()),
filename, line));
if (rc == 0)
PJ_LOG(3,(THIS_FILE, "Looks like everything is okay!.."));
else
PJ_LOG(3,(THIS_FILE, "Test completed with error(s)"));
report_ival("test-status", rc, "", "Overall test status/result (0==success)");
close_report();
return rc;
}
/*****************************************************************************
**
** UAC Transaction Test.
**
*****************************************************************************
*/
int tsx_uac_test(struct tsx_test_param *param)
{
pj_sockaddr_in addr;
pj_status_t status;
timer.tsx_key.ptr = timer.key_buf;
test_param = param;
/* Get transport flag */
tp_flag = pjsip_transport_get_flag_from_type(test_param->type);
pj_ansi_sprintf(TARGET_URI, "sip:[email protected]:%d;transport=%s",
param->port, param->tp_type);
pj_ansi_sprintf(FROM_URI, "sip:[email protected]:%d;transport=%s",
param->port, param->tp_type);
/* Check if loop transport is configured. */
status = pjsip_endpt_acquire_transport(endpt, PJSIP_TRANSPORT_LOOP_DGRAM,
&addr, sizeof(addr), NULL, &loop);
if (status != PJ_SUCCESS) {
PJ_LOG(3,(THIS_FILE, " Error: loop transport is not configured!"));
return -10;
}
/* Register modules. */
status = pjsip_endpt_register_module(endpt, &tsx_user);
if (status != PJ_SUCCESS) {
app_perror(" Error: unable to register module", status);
return -30;
}
status = pjsip_endpt_register_module(endpt, &msg_receiver);
if (status != PJ_SUCCESS) {
app_perror(" Error: unable to register module", status);
return -40;
}
/* TEST1_BRANCH_ID: Basic retransmit and timeout test. */
status = tsx_uac_retransmit_test();
if (status != 0)
return status;
/* TEST2_BRANCH_ID: Resolve error test. */
status = tsx_resolve_error_test();
if (status != 0)
return status;
/* TEST3_BRANCH_ID: UAC terminate while resolving test. */
status = tsx_terminate_resolving_test();
if (status != 0)
return status;
/* TEST4_BRANCH_ID: Transport failed after several retransmissions.
* Only applies to loop transport.
*/
if (test_param->type == PJSIP_TRANSPORT_LOOP_DGRAM) {
status = tsx_retransmit_fail_test();
if (status != 0)
return status;
}
/* TEST5_BRANCH_ID: Terminate transaction after several retransmissions
* Only applicable to non-reliable transports.
*/
if ((tp_flag & PJSIP_TRANSPORT_RELIABLE) == 0) {
status = tsx_terminate_after_retransmit_test();
if (status != 0)
return status;
}
/* TEST6_BRANCH_ID: Successfull non-invite transaction */
status = perform_generic_test("test6: successfull non-invite transaction",
TEST6_BRANCH_ID, &pjsip_options_method);
if (status != 0)
return status;
/* TEST7_BRANCH_ID: Successfull non-invite transaction */
status = perform_generic_test("test7: successfull non-invite transaction "
"with provisional response",
TEST7_BRANCH_ID, &pjsip_options_method);
if (status != 0)
return status;
/* TEST8_BRANCH_ID: Failed invite transaction */
status = perform_generic_test("test8: failed invite transaction",
TEST8_BRANCH_ID, &pjsip_invite_method);
if (status != 0)
return status;
/* TEST9_BRANCH_ID: Failed invite transaction with provisional response */
status = perform_generic_test("test9: failed invite transaction with "
"provisional response",
TEST9_BRANCH_ID, &pjsip_invite_method);
if (status != 0)
return status;
pjsip_transport_dec_ref(loop);
flush_events(500);
/* Unregister modules. */
status = pjsip_endpt_unregister_module(endpt, &tsx_user);
if (status != PJ_SUCCESS) {
app_perror(" Error: unable to unregister module", status);
return -31;
}
status = pjsip_endpt_unregister_module(endpt, &msg_receiver);
if (status != PJ_SUCCESS) {
app_perror(" Error: unable to unregister module", status);
return -41;
}
return 0;
}
