/* Send the line CMDLINE with command for the SCDdaemon to it and send all status messages back. This command is used as a general quoting mechanism to pass everything verbatim to SCDAEMON. The PIN inquiry is handled inside gpg-agent. */ int agent_card_scd (ctrl_t ctrl, const char *cmdline, int (*getpin_cb)(void *, const char *, char*, size_t), void *getpin_cb_arg, void *assuan_context) { int rc; struct inq_needpin_s inqparm; int saveflag; rc = start_scd (ctrl); if (rc) return rc; inqparm.ctx = ctrl->scd_local->ctx; inqparm.getpin_cb = getpin_cb; inqparm.getpin_cb_arg = getpin_cb_arg; inqparm.passthru = assuan_context; inqparm.any_inq_seen = 0; saveflag = assuan_get_flag (ctrl->scd_local->ctx, ASSUAN_CONVEY_COMMENTS); assuan_set_flag (ctrl->scd_local->ctx, ASSUAN_CONVEY_COMMENTS, 1); rc = assuan_transact (ctrl->scd_local->ctx, cmdline, pass_data_thru, assuan_context, inq_needpin, &inqparm, pass_status_thru, assuan_context); if (inqparm.any_inq_seen && gpg_err_code(rc) == GPG_ERR_ASS_CANCELED) rc = cancel_inquire (ctrl, rc); assuan_set_flag (ctrl->scd_local->ctx, ASSUAN_CONVEY_COMMENTS, saveflag); if (rc) { return unlock_scd (ctrl, rc); } return unlock_scd (ctrl, 0); }
/* Close a popup window. */ void agent_popup_message_stop (ctrl_t ctrl) { int rc; pid_t pid; (void)ctrl; if (!popup_tid || !entry_ctx) { log_debug ("agent_popup_message_stop called with no active popup\n"); return; } pid = assuan_get_pid (entry_ctx); if (pid == (pid_t)(-1)) ; /* No pid available can't send a kill. */ else if (popup_finished) ; /* Already finished and ready for joining. */ #ifdef HAVE_W32_SYSTEM /* Older versions of assuan set PID to 0 on Windows to indicate an invalid value. */ else if (pid != (pid_t) INVALID_HANDLE_VALUE && pid != 0) { HANDLE process = (HANDLE) pid; /* Arbitrary error code. */ TerminateProcess (process, 1); } #else else if (pid && ((rc=waitpid (pid, NULL, WNOHANG))==-1 || (rc == pid)) ) { /* The daemon already died. No need to send a kill. However because we already waited for the process, we need to tell assuan that it should not wait again (done by unlock_pinentry). */ if (rc == pid) assuan_set_flag (entry_ctx, ASSUAN_NO_WAITPID, 1); } else if (pid > 0) kill (pid, SIGINT); #endif /* Now wait for the thread to terminate. */ rc = npth_join (popup_tid, NULL); if (rc) log_debug ("agent_popup_message_stop: pth_join failed: %s\n", strerror (rc)); /* Thread IDs are opaque, but we try our best here by resetting it to the same content that a static global variable has. */ memset (&popup_tid, '\0', sizeof (popup_tid)); entry_owner = NULL; /* Now we can close the connection. */ unlock_pinentry (0); }
/* Ask for the passphrase using the supplied arguments. The returned passphrase needs to be freed by the caller. */ int agent_get_passphrase (ctrl_t ctrl, char **retpass, const char *desc, const char *prompt, const char *errtext, int with_qualitybar) { int rc; char line[ASSUAN_LINELENGTH]; struct entry_parm_s parm; int saveflag; int close_button; *retpass = NULL; if (opt.batch) return gpg_error (GPG_ERR_BAD_PASSPHRASE); if (ctrl->pinentry_mode != PINENTRY_MODE_ASK) { if (ctrl->pinentry_mode == PINENTRY_MODE_CANCEL) return gpg_error (GPG_ERR_CANCELED); if (ctrl->pinentry_mode == PINENTRY_MODE_LOOPBACK) { size_t size; size_t len = ASSUAN_LINELENGTH/2; unsigned char *buffer = gcry_malloc_secure (len); rc = pinentry_loopback(ctrl, "PASSPHRASE", &buffer, &size, len); if (rc) xfree(buffer); else { buffer[size] = 0; *retpass = buffer; } return rc; } return gpg_error (GPG_ERR_NO_PIN_ENTRY); } rc = start_pinentry (ctrl); if (rc) return rc; if (!prompt) prompt = desc && strstr (desc, "PIN")? "PIN": _("Passphrase"); if (desc) snprintf (line, DIM(line)-1, "SETDESC %s", desc); else snprintf (line, DIM(line)-1, "RESET"); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); snprintf (line, DIM(line)-1, "SETPROMPT %s", prompt); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); if (with_qualitybar && opt.min_passphrase_len) { rc = setup_qualitybar (); if (rc) return unlock_pinentry (rc); } if (errtext) { snprintf (line, DIM(line)-1, "SETERROR %s", errtext); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); } memset (&parm, 0, sizeof parm); parm.size = ASSUAN_LINELENGTH/2 - 5; parm.buffer = gcry_malloc_secure (parm.size+10); if (!parm.buffer) return unlock_pinentry (out_of_core ()); saveflag = assuan_get_flag (entry_ctx, ASSUAN_CONFIDENTIAL); assuan_begin_confidential (entry_ctx); close_button = 0; rc = assuan_transact (entry_ctx, "GETPIN", getpin_cb, &parm, inq_quality, entry_ctx, close_button_status_cb, &close_button); assuan_set_flag (entry_ctx, ASSUAN_CONFIDENTIAL, saveflag); /* Most pinentries out in the wild return the old Assuan error code for canceled which gets translated to an assuan Cancel error and not to the code for a user cancel. Fix this here. */ if (rc && gpg_err_source (rc) && gpg_err_code (rc) == GPG_ERR_ASS_CANCELED) rc = gpg_err_make (gpg_err_source (rc), GPG_ERR_CANCELED); /* Change error code in case the window close button was clicked to cancel the operation. */ if (close_button && gpg_err_code (rc) == GPG_ERR_CANCELED) rc = gpg_err_make (gpg_err_source (rc), GPG_ERR_FULLY_CANCELED); if (rc) xfree (parm.buffer); else *retpass = parm.buffer; return unlock_pinentry (rc); }
/* Call the Entry and ask for the PIN. We do check for a valid PIN number here and repeat it as long as we have invalid formed numbers. */ int agent_askpin (ctrl_t ctrl, const char *desc_text, const char *prompt_text, const char *initial_errtext, struct pin_entry_info_s *pininfo) { int rc; char line[ASSUAN_LINELENGTH]; struct entry_parm_s parm; const char *errtext = NULL; int is_pin = 0; int saveflag; int close_button; if (opt.batch) return 0; /* fixme: we should return BAD PIN */ if (ctrl->pinentry_mode != PINENTRY_MODE_ASK) { if (ctrl->pinentry_mode == PINENTRY_MODE_CANCEL) return gpg_error (GPG_ERR_CANCELED); if (ctrl->pinentry_mode == PINENTRY_MODE_LOOPBACK) { unsigned char *passphrase; size_t size; *pininfo->pin = 0; /* Reset the PIN. */ rc = pinentry_loopback(ctrl, "PASSPHRASE", &passphrase, &size, pininfo->max_length); if (rc) return rc; memcpy(&pininfo->pin, passphrase, size); xfree(passphrase); pininfo->pin[size] = 0; if (pininfo->check_cb) { /* More checks by utilizing the optional callback. */ pininfo->cb_errtext = NULL; rc = pininfo->check_cb (pininfo); } return rc; } return gpg_error(GPG_ERR_NO_PIN_ENTRY); } if (!pininfo || pininfo->max_length < 1) return gpg_error (GPG_ERR_INV_VALUE); if (!desc_text && pininfo->min_digits) desc_text = _("Please enter your PIN, so that the secret key " "can be unlocked for this session"); else if (!desc_text) desc_text = _("Please enter your passphrase, so that the secret key " "can be unlocked for this session"); if (prompt_text) is_pin = !!strstr (prompt_text, "PIN"); else is_pin = desc_text && strstr (desc_text, "PIN"); rc = start_pinentry (ctrl); if (rc) return rc; snprintf (line, DIM(line)-1, "SETDESC %s", desc_text); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); snprintf (line, DIM(line)-1, "SETPROMPT %s", prompt_text? prompt_text : is_pin? "PIN:" : "Passphrase:"); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); /* If a passphrase quality indicator has been requested and a minimum passphrase length has not been disabled, send the command to the pinentry. */ if (pininfo->with_qualitybar && opt.min_passphrase_len ) { rc = setup_qualitybar (); if (rc) return unlock_pinentry (rc); } if (initial_errtext) { snprintf (line, DIM(line)-1, "SETERROR %s", initial_errtext); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); } for (;pininfo->failed_tries < pininfo->max_tries; pininfo->failed_tries++) { memset (&parm, 0, sizeof parm); parm.size = pininfo->max_length; *pininfo->pin = 0; /* Reset the PIN. */ parm.buffer = (unsigned char*)pininfo->pin; if (errtext) { /* TRANSLATORS: The string is appended to an error message in the pinentry. The %s is the actual error message, the two %d give the current and maximum number of tries. */ snprintf (line, DIM(line)-1, _("SETERROR %s (try %d of %d)"), errtext, pininfo->failed_tries+1, pininfo->max_tries); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); errtext = NULL; } saveflag = assuan_get_flag (entry_ctx, ASSUAN_CONFIDENTIAL); assuan_begin_confidential (entry_ctx); close_button = 0; rc = assuan_transact (entry_ctx, "GETPIN", getpin_cb, &parm, inq_quality, entry_ctx, close_button_status_cb, &close_button); assuan_set_flag (entry_ctx, ASSUAN_CONFIDENTIAL, saveflag); /* Most pinentries out in the wild return the old Assuan error code for canceled which gets translated to an assuan Cancel error and not to the code for a user cancel. Fix this here. */ if (rc && gpg_err_source (rc) && gpg_err_code (rc) == GPG_ERR_ASS_CANCELED) rc = gpg_err_make (gpg_err_source (rc), GPG_ERR_CANCELED); /* Change error code in case the window close button was clicked to cancel the operation. */ if (close_button && gpg_err_code (rc) == GPG_ERR_CANCELED) rc = gpg_err_make (gpg_err_source (rc), GPG_ERR_FULLY_CANCELED); if (gpg_err_code (rc) == GPG_ERR_ASS_TOO_MUCH_DATA) errtext = is_pin? _("PIN too long") : _("Passphrase too long"); else if (rc) return unlock_pinentry (rc); if (!errtext && pininfo->min_digits) { /* do some basic checks on the entered PIN. */ if (!all_digitsp (pininfo->pin)) errtext = _("Invalid characters in PIN"); else if (pininfo->max_digits && strlen (pininfo->pin) > pininfo->max_digits) errtext = _("PIN too long"); else if (strlen (pininfo->pin) < pininfo->min_digits) errtext = _("PIN too short"); } if (!errtext && pininfo->check_cb) { /* More checks by utilizing the optional callback. */ pininfo->cb_errtext = NULL; rc = pininfo->check_cb (pininfo); if (rc == -1 && pininfo->cb_errtext) errtext = pininfo->cb_errtext; else if (gpg_err_code (rc) == GPG_ERR_BAD_PASSPHRASE || gpg_err_code (rc) == GPG_ERR_BAD_PIN) errtext = (is_pin? _("Bad PIN") : _("Bad Passphrase")); else if (rc) return unlock_pinentry (rc); } if (!errtext) return unlock_pinentry (0); /* okay, got a PIN or passphrase */ } return unlock_pinentry (gpg_error (pininfo->min_digits? GPG_ERR_BAD_PIN : GPG_ERR_BAD_PASSPHRASE)); }
/* Fork off the pin entry if this has not already been done. Note, that this function must always be used to aquire the lock for the pinentry - we will serialize _all_ pinentry calls. */ static int start_pinentry (ctrl_t ctrl) { int rc = 0; const char *pgmname; assuan_context_t ctx; const char *argv[5]; int no_close_list[3]; int i; const char *tmpstr; unsigned long pinentry_pid; const char *value; struct timespec abstime; int err; npth_clock_gettime (&abstime); abstime.tv_sec += LOCK_TIMEOUT; err = npth_mutex_timedlock (&entry_lock, &abstime); if (err) { if (err == ETIMEDOUT) rc = gpg_error (GPG_ERR_TIMEOUT); else rc = gpg_error_from_errno (rc); log_error (_("failed to acquire the pinentry lock: %s\n"), gpg_strerror (rc)); return rc; } entry_owner = ctrl; if (entry_ctx) return 0; if (opt.verbose) log_info ("starting a new PIN Entry\n"); #ifdef HAVE_W32_SYSTEM fflush (stdout); fflush (stderr); #endif if (fflush (NULL)) { #ifndef HAVE_W32_SYSTEM gpg_error_t tmperr = gpg_error (gpg_err_code_from_errno (errno)); #endif log_error ("error flushing pending output: %s\n", strerror (errno)); /* At least Windows XP fails here with EBADF. According to docs and Wine an fflush(NULL) is the same as _flushall. However the Wime implementaion does not flush stdin,stdout and stderr - see above. Lets try to ignore the error. */ #ifndef HAVE_W32_SYSTEM return unlock_pinentry (tmperr); #endif } if (!opt.pinentry_program || !*opt.pinentry_program) opt.pinentry_program = gnupg_module_name (GNUPG_MODULE_NAME_PINENTRY); pgmname = opt.pinentry_program; if ( !(pgmname = strrchr (opt.pinentry_program, '/'))) pgmname = opt.pinentry_program; else pgmname++; /* OS X needs the entire file name in argv[0], so that it can locate the resource bundle. For other systems we stick to the usual convention of supplying only the name of the program. */ #ifdef __APPLE__ argv[0] = opt.pinentry_program; #else /*!__APPLE__*/ argv[0] = pgmname; #endif /*__APPLE__*/ if (!opt.keep_display && (value = session_env_getenv (ctrl->session_env, "DISPLAY"))) { argv[1] = "--display"; argv[2] = value; argv[3] = NULL; } else argv[1] = NULL; i=0; if (!opt.running_detached) { if (log_get_fd () != -1) no_close_list[i++] = assuan_fd_from_posix_fd (log_get_fd ()); no_close_list[i++] = assuan_fd_from_posix_fd (fileno (stderr)); } no_close_list[i] = -1; rc = assuan_new (&ctx); if (rc) { log_error ("can't allocate assuan context: %s\n", gpg_strerror (rc)); return rc; } /* We don't want to log the pinentry communication to make the logs easier to read. We might want to add a new debug option to enable pinentry logging. */ #ifdef ASSUAN_NO_LOGGING assuan_set_flag (ctx, ASSUAN_NO_LOGGING, 1); #endif /* Connect to the pinentry and perform initial handshaking. Note that atfork is used to change the environment for pinentry. We start the server in detached mode to suppress the console window under Windows. */ rc = assuan_pipe_connect (ctx, opt.pinentry_program, argv, no_close_list, atfork_cb, ctrl, ASSUAN_PIPE_CONNECT_DETACHED); if (rc) { log_error ("can't connect to the PIN entry module '%s': %s\n", opt.pinentry_program, gpg_strerror (rc)); assuan_release (ctx); return unlock_pinentry (gpg_error (GPG_ERR_NO_PIN_ENTRY)); } entry_ctx = ctx; if (DBG_ASSUAN) log_debug ("connection to PIN entry established\n"); rc = assuan_transact (entry_ctx, opt.no_grab? "OPTION no-grab":"OPTION grab", NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); value = session_env_getenv (ctrl->session_env, "GPG_TTY"); if (value) { char *optstr; if (asprintf (&optstr, "OPTION ttyname=%s", value) < 0 ) return unlock_pinentry (out_of_core ()); rc = assuan_transact (entry_ctx, optstr, NULL, NULL, NULL, NULL, NULL, NULL); xfree (optstr); if (rc) return unlock_pinentry (rc); } value = session_env_getenv (ctrl->session_env, "TERM"); if (value) { char *optstr; if (asprintf (&optstr, "OPTION ttytype=%s", value) < 0 ) return unlock_pinentry (out_of_core ()); rc = assuan_transact (entry_ctx, optstr, NULL, NULL, NULL, NULL, NULL, NULL); xfree (optstr); if (rc) return unlock_pinentry (rc); } if (ctrl->lc_ctype) { char *optstr; if (asprintf (&optstr, "OPTION lc-ctype=%s", ctrl->lc_ctype) < 0 ) return unlock_pinentry (out_of_core ()); rc = assuan_transact (entry_ctx, optstr, NULL, NULL, NULL, NULL, NULL, NULL); xfree (optstr); if (rc) return unlock_pinentry (rc); } if (ctrl->lc_messages) { char *optstr; if (asprintf (&optstr, "OPTION lc-messages=%s", ctrl->lc_messages) < 0 ) return unlock_pinentry (out_of_core ()); rc = assuan_transact (entry_ctx, optstr, NULL, NULL, NULL, NULL, NULL, NULL); xfree (optstr); if (rc) return unlock_pinentry (rc); } { /* Provide a few default strings for use by the pinentries. This may help a pinentry to avoid implementing localization code. */ static struct { const char *key, *value; } tbl[] = { /* TRANSLATORS: These are labels for buttons etc used in Pinentries. An underscore indicates that the next letter should be used as an accelerator. Double the underscore for a literal one. The actual to be translated text starts after the second vertical bar. */ { "ok", N_("|pinentry-label|_OK") }, { "cancel", N_("|pinentry-label|_Cancel") }, { "prompt", N_("|pinentry-label|PIN:") }, { NULL, NULL} }; char *optstr; int idx; const char *s, *s2; for (idx=0; tbl[idx].key; idx++) { s = _(tbl[idx].value); if (*s == '|' && (s2=strchr (s+1,'|'))) s = s2+1; if (asprintf (&optstr, "OPTION default-%s=%s", tbl[idx].key, s) < 0 ) return unlock_pinentry (out_of_core ()); assuan_transact (entry_ctx, optstr, NULL, NULL, NULL, NULL, NULL, NULL); xfree (optstr); } } /* Tell the pinentry the name of a file it shall touch after having messed with the tty. This is optional and only supported by newer pinentries and thus we do no error checking. */ tmpstr = opt.pinentry_touch_file; if (tmpstr && !strcmp (tmpstr, "/dev/null")) tmpstr = NULL; else if (!tmpstr) tmpstr = get_agent_socket_name (); if (tmpstr) { char *optstr; if (asprintf (&optstr, "OPTION touch-file=%s", tmpstr ) < 0 ) ; else { assuan_transact (entry_ctx, optstr, NULL, NULL, NULL, NULL, NULL, NULL); xfree (optstr); } } /* Now ask the Pinentry for its PID. If the Pinentry is new enough it will send the pid back and we will use an inquire to notify our client. The client may answer the inquiry either with END or with CAN to cancel the pinentry. */ rc = assuan_transact (entry_ctx, "GETINFO pid", getinfo_pid_cb, &pinentry_pid, NULL, NULL, NULL, NULL); if (rc) { log_info ("You may want to update to a newer pinentry\n"); rc = 0; } else if (!rc && (pid_t)pinentry_pid == (pid_t)(-1)) log_error ("pinentry did not return a PID\n"); else { rc = agent_inq_pinentry_launched (ctrl, pinentry_pid); if (gpg_err_code (rc) == GPG_ERR_CANCELED || gpg_err_code (rc) == GPG_ERR_FULLY_CANCELED) return unlock_pinentry (gpg_err_make (GPG_ERR_SOURCE_DEFAULT, gpg_err_code (rc))); rc = 0; } return 0; }
/* Ask for the passphrase using the supplied arguments. The returned passphrase needs to be freed by the caller. */ int agent_get_passphrase (ctrl_t ctrl, char **retpass, const char *desc, const char *prompt, const char *errtext, int with_qualitybar) { int rc; char line[ASSUAN_LINELENGTH]; struct entry_parm_s parm; int saveflag; *retpass = NULL; if (opt.batch) return gpg_error (GPG_ERR_BAD_PASSPHRASE); rc = start_pinentry (ctrl); if (rc) return rc; if (!prompt) prompt = desc && strstr (desc, "PIN")? "PIN": _("Passphrase"); if (desc) snprintf (line, DIM(line)-1, "SETDESC %s", desc); else snprintf (line, DIM(line)-1, "RESET"); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); snprintf (line, DIM(line)-1, "SETPROMPT %s", prompt); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); if (with_qualitybar && opt.min_passphrase_len) { rc = setup_qualitybar (); if (rc) return unlock_pinentry (rc); } if (errtext) { snprintf (line, DIM(line)-1, "SETERROR %s", errtext); line[DIM(line)-1] = 0; rc = assuan_transact (entry_ctx, line, NULL, NULL, NULL, NULL, NULL, NULL); if (rc) return unlock_pinentry (rc); } memset (&parm, 0, sizeof parm); parm.size = ASSUAN_LINELENGTH/2 - 5; parm.buffer = gcry_malloc_secure (parm.size+10); if (!parm.buffer) return unlock_pinentry (out_of_core ()); saveflag = assuan_get_flag (entry_ctx, ASSUAN_CONFIDENTIAL); assuan_begin_confidential (entry_ctx); rc = assuan_transact (entry_ctx, "GETPIN", getpin_cb, &parm, inq_quality, entry_ctx, NULL, NULL); assuan_set_flag (entry_ctx, ASSUAN_CONFIDENTIAL, saveflag); /* Most pinentries out in the wild return the old Assuan error code for canceled which gets translated to an assuan Cancel error and not to the code for a user cancel. Fix this here. */ if (rc && gpg_err_source (rc) && gpg_err_code (rc) == GPG_ERR_ASS_CANCELED) rc = gpg_err_make (gpg_err_source (rc), GPG_ERR_CANCELED); if (rc) xfree (parm.buffer); else *retpass = parm.buffer; return unlock_pinentry (rc); }
/* Check whether the Scdaemon is still alive and clean it up if not. */ void agent_scd_check_aliveness (void) { pid_t pid; #ifdef HAVE_W32_SYSTEM DWORD rc; #else int rc; #endif struct timespec abstime; int err; if (!primary_scd_ctx) return; /* No scdaemon running. */ /* This is not a critical function so we use a short timeout while acquiring the lock. */ npth_clock_gettime (&abstime); abstime.tv_sec += 1; err = npth_mutex_timedlock (&start_scd_lock, &abstime); if (err) { if (err == ETIMEDOUT) { if (opt.verbose > 1) log_info ("failed to acquire the start_scd lock while" " doing an aliveness check: %s\n", strerror (err)); } else log_error ("failed to acquire the start_scd lock while" " doing an aliveness check: %s\n", strerror (err)); return; } if (primary_scd_ctx) { pid = assuan_get_pid (primary_scd_ctx); #ifdef HAVE_W32_SYSTEM /* If we have a PID we disconnect if either GetExitProcessCode fails or if ir returns the exit code of the scdaemon. 259 is the error code for STILL_ALIVE. */ if (pid != (pid_t)(void*)(-1) && pid && (!GetExitCodeProcess ((HANDLE)pid, &rc) || rc != 259)) #else if (pid != (pid_t)(-1) && pid && ((rc=waitpid (pid, NULL, WNOHANG))==-1 || (rc == pid)) ) #endif { /* Okay, scdaemon died. Disconnect the primary connection now but take care that it won't do another wait. Also cleanup all other connections and release their resources. The next use will start a new daemon then. Due to the use of the START_SCD_LOCAL we are sure that none of these context are actually in use. */ struct scd_local_s *sl; assuan_set_flag (primary_scd_ctx, ASSUAN_NO_WAITPID, 1); assuan_release (primary_scd_ctx); for (sl=scd_local_list; sl; sl = sl->next_local) { if (sl->ctx) { if (sl->ctx != primary_scd_ctx) assuan_release (sl->ctx); sl->ctx = NULL; } } primary_scd_ctx = NULL; primary_scd_ctx_reusable = 0; xfree (socket_name); socket_name = NULL; } } err = npth_mutex_unlock (&start_scd_lock); if (err) log_error ("failed to release the start_scd lock while" " doing the aliveness check: %s\n", strerror (err)); }
/* Same as assuan_set_flag (ctx, ASSUAN_CONFIDENTIAL, 0). */ void assuan_end_confidential (assuan_context_t ctx) { assuan_set_flag (ctx, ASSUAN_CONFIDENTIAL, 0); }