static int at91sam9260ek_devices_init(void)
{
ek_add_device_nand();
at91sam9260ek_phy_reset();
at91_add_device_eth(0, &macb_pdata);
at91_add_device_usbh_ohci(&ek_usbh_data);
at91_add_device_udc(&ek_udc_data);
ek_usb_add_device_mci();
ek_add_device_buttons();
ek_add_led();
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
ek_set_board_type();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
static int at91rm9200ek_devices_init(void)
{
/*
* Correct IRDA resistor problem
* Set PA23_TXD in Output
*/
at91_set_gpio_output(AT91_PIN_PA23, 1);
at91_add_device_eth(0, ðer_pdata);
add_cfi_flash_device(0, AT91_CHIPSELECT_0, SZ_8M, 0);
/* USB Host */
at91_add_device_usbh_ohci(&ek_usbh_data);
ek_device_add_leds();
ek_add_device_udc();
ek_add_device_spi();
#if defined(CONFIG_DRIVER_CFI) || defined(CONFIG_DRIVER_CFI_OLD)
devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self");
devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
#endif
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
armlinux_set_architecture(MACH_TYPE_AT91RM9200EK);
return 0;
}
static void __init ek_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
at91_add_device_tsadcc(&ek_tsadcc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
}
/*
static char tft_type = 's';
static int __init ek_tft_setup(char *str)
{
tft_type = str[0];
return 1;
}
__setup("tft=", ek_tft_setup);
*/
static void __init ek_board_init(void)
{/*
int default_display = 0;
switch (tft_type) {
case 's': // small or production
default_display = 0;
break;
case 'm': // middle
default_display = 1;
break;
case 'b': // big
default:
default_display = 2;
break;
}
ek_fb_set_platdata(default_display);*/
/* Serial */
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* MMC */
#if 0
at91_add_device_mci(0, &mci0_data);
at91_add_device_mci(1, &mci1_data);
#endif
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
#if 1
/* DM9000 ethernet */
ek_add_device_dm9000();
#endif
/* NAND */
ek_add_device_nand();
/* SPI */
at91_add_device_spi(ek_spi0_devices, ARRAY_SIZE(ek_spi0_devices));
/* I2C */
at91_add_device_i2c(0, ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LCD Controller */
//at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
//at91_add_device_tsadcc(&ek_tsadcc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
//at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
#if 0
/* CF */
at91_add_device_cf(&at91sam9g45ek_cf_data);
#endif
}
static void __init ek_board_init(void)
{
/* Serial */
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 not connected on the -EK board */
/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
at91_add_device_mci(0, &mci0_data);
at91_add_device_mci(1, &mci1_data);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
/* ISI, using programmable clock as ISI_MCK */
at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
at91_add_device_tsadcc(&ek_tsadcc_data);
/* ADC */
at91_add_device_adc(&ek_adc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
/* Other platform devices */
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static int dss11_devices_init(void)
{
dss11_add_device_nand();
dss11_phy_reset();
at91_add_device_eth(0, &macb_pdata);
at91_add_device_mci(0, &dss11_mci_data);
at91_add_device_usbh_ohci(&dss11_usbh_data);
armlinux_set_architecture(MACH_TYPE_DSS11);
devfs_add_partition("nand0", 0x00000, 0x20000, DEVFS_PARTITION_FIXED, "bootstrap");
dev_add_bb_dev("bootstrap", "bootstrap.bb");
devfs_add_partition("nand0", 0x20000, 0x40000, DEVFS_PARTITION_FIXED, "barebox");
dev_add_bb_dev("barebox", "barebox.bb");
devfs_add_partition("nand0", 0x60000, 0x40000, DEVFS_PARTITION_FIXED, "barebox-env");
dev_add_bb_dev("barebox-env", "env0");
return 0;
}
static int at91sam9x5ek_devices_init(void)
{
ek_add_device_nand();
at91_add_device_eth(0, &macb_pdata);
at91_add_device_usbh_ohci(&ek_usbh_data);
ek_add_led();
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
armlinux_set_architecture(CONFIG_MACH_AT91SAM9X5EK);
devfs_add_partition("nand0", 0x00000, SZ_256K, PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K + SZ_128K, SZ_128K, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_128K, PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
static void __init ek_board_init(void)
{
/* */
at91_add_device_serial();
/* */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* */
at91_add_device_usba(&ek_usba_udc_data);
/* */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* */
at91_add_device_mci(0, &mci0_data);
at91_add_device_mci(1, &mci1_data);
/* */
at91_add_device_eth(&ek_macb_data);
/* */
ek_add_device_nand();
/* */
at91_add_device_i2c(0, NULL, 0);
/* */
at91_add_device_isi(&isi_data, true);
/* */
at91_add_device_lcdc(&ek_lcdc_data);
/* */
at91_add_device_tsadcc(&ek_tsadcc_data);
/* */
ek_add_device_buttons();
/* */
at91_add_device_ac97(&ek_ac97_data);
/* */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
/* */
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init pm9g45_add_device_usbh(void)
{
at91_add_device_usbh_ohci(&usbh_data);
}
static void ek_add_device_usb(void)
{
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
at91_add_device_usbh_ehci(&ek_usbh_hs_data);
}
static void usb_a9260_add_device_usb(void)
{
at91_add_device_usbh_ohci(&ek_usbh_data);
}
