static void __init k2t_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(k2t_leds_gpio),
k2t_leds_gpio);
ath79_register_gpio_keys_polled(-1, K2T_KEYS_POLL_INTERVAL,
ARRAY_SIZE(k2t_gpio_keys),
k2t_gpio_keys);
ath79_register_usb();
platform_device_register(&ath79_mdio0_device);
mdiobus_register_board_info(k2t_mdio0_info,
ARRAY_SIZE(k2t_mdio0_info));
ath79_init_mac(ath79_eth0_data.mac_addr, art + K2T_MAC0_OFFSET, 0);
/* GMAC0 is connected to an AR8337 switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_register_eth(0);
ath79_register_wmac_simple();
ath79_register_pci();
}
static void __init wndr4300_setup(void)
{
ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4300_leds_gpio),
wndr4300_leds_gpio);
ath79_register_gpio_keys_polled(-1, WNDR4300_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wndr4300_gpio_keys),
wndr4300_gpio_keys);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
mdiobus_register_board_info(wndr4300_mdio0_info,
ARRAY_SIZE(wndr4300_mdio0_info));
ath79_register_mdio(0, 0x0);
/* GMAC0 is connected to an AR8327N switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x06000000;
ath79_register_eth(0);
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
ath79_register_nfc();
ath79_register_usb();
ath79_register_wmac_simple();
ap91_pci_init_simple();
}
static void __init wndr4300_setup(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(wndr4300_leds_gpio); i++)
ath79_gpio_output_select(wndr4300_leds_gpio[i].gpio,
AR934X_GPIO_OUT_GPIO);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4300_leds_gpio),
wndr4300_leds_gpio);
ath79_register_gpio_keys_polled(-1, WNDR4300_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wndr4300_gpio_keys),
wndr4300_gpio_keys);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
mdiobus_register_board_info(wndr4300_mdio0_info,
ARRAY_SIZE(wndr4300_mdio0_info));
ath79_register_mdio(0, 0x0);
/* GMAC0 is connected to an AR8327N switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x06000000;
ath79_register_eth(0);
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
ath79_register_nfc();
ath79_register_usb();
ath79_register_wmac_simple();
/* enable power for the USB port */
ap9x_pci_setup_wmac_gpio(0, BIT(WNDR4300_GPIO_USB_5V),
BIT(WNDR4300_GPIO_USB_5V));
ap91_pci_init_simple();
}
static void __init r6100_setup(void)
{
ath79_register_leds_gpio(-1, ARRAY_SIZE(r6100_leds_gpio),
r6100_leds_gpio);
ath79_register_gpio_keys_polled(-1, R6100_KEYS_POLL_INTERVAL,
ARRAY_SIZE(r6100_gpio_keys),
r6100_gpio_keys);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
ath79_register_mdio(1, 0x0);
/* GMAC0 is connected to the PHY0 of the internal switch */
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask = BIT(0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_register_eth(0);
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_register_eth(1);
gpio_request_one(R6100_GPIO_USB_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB power");
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
ath79_register_nfc();
ath79_register_usb();
ath79_register_wmac_simple();
ap91_pci_init_simple();
}
static void __init wlr8100_common_setup(void)
{
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wlr8100_leds_gpio),
wlr8100_leds_gpio);
ath79_register_gpio_keys_polled(-1, WLR8100_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wlr8100_gpio_keys),
wlr8100_gpio_keys);
ath79_register_usb();
ath79_register_wmac_simple();
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
ath79_register_mdio(0, 0x0);
mdiobus_register_board_info(wlr8100_mdio0_info,
ARRAY_SIZE(wlr8100_mdio0_info));
/* GMAC0 is connected to the RMGII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_register_eth(0);
/* GMAC1 is connected tot eh SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(1);
}
