Ejemplo n.º 1
0
static void callback(SLBufferQueueItf bufq, void *param)
{
    assert(NULL == param);
    if (!eof) {
        void *buffer = (char *)buffers + framesPerBuffer * sfframesize * which;
        ssize_t count = audio_utils_fifo_read(&fifo, buffer, framesPerBuffer);
        // on underrun from pipe, substitute silence
        if (0 >= count) {
            memset(buffer, 0, framesPerBuffer * sfframesize);
            count = framesPerBuffer;
            ++underruns;
        }
        if (count > 0) {
            SLuint32 nbytes = count * sfframesize;
            nbytes = squeeze(buffer, nbytes);
            SLresult result = (*bufq)->Enqueue(bufq, buffer, nbytes);
            assert(SL_RESULT_SUCCESS == result);
            if (++which >= numBuffers)
                which = 0;
        }
    }
}
Ejemplo n.º 2
0
// Called after audio player empties a buffer of data
static void playerCallback(SLBufferQueueItf caller __unused, void *context) {
    sles_data *pSles = (sles_data*) context;
    if (pSles != NULL) {
        collectPlayerBufferPeriod(pSles);
        SLresult result;

        pthread_mutex_lock(&(pSles->mutex));
        //ee  SLES_PRINTF("<P");

        // Get the buffer that just finished playing
        assert(pSles->txFront <= pSles->txBufCount);
        assert(pSles->txRear <= pSles->txBufCount);
        assert(pSles->txFront != pSles->txRear);
        char *buffer = pSles->txBuffers[pSles->txFront];
        if (++pSles->txFront > pSles->txBufCount) {
            pSles->txFront = 0;
        }

        if (pSles->testType == TEST_TYPE_LATENCY) {
            ssize_t actual = audio_utils_fifo_read(&(pSles->fifo), buffer, pSles->bufSizeInFrames);
            if (actual != (ssize_t) pSles->bufSizeInFrames) {
                write(1, "/", 1);
                // on underrun from pipe, substitute silence
                memset(buffer, 0, pSles->bufSizeInFrames * pSles->channels * sizeof(short));
            }

            if (pSles->injectImpulse == -1) {   // here we inject pulse
                // Experimentally, a single frame impulse was insufficient to trigger feedback.
                // Also a Nyquist frequency signal was also insufficient, probably because
                // the response of output and/or input path was not adequate at high frequencies.
                // This short burst of a few cycles of square wave at Nyquist/4 found to work well.
                for (unsigned i = 0; i < pSles->bufSizeInFrames / 8; i += 8) {
                    for (int j = 0; j < 8; j++) {
                        for (unsigned k = 0; k < pSles->channels; k++) {
                            ((short *) buffer)[(i + j) * pSles->channels + k] =
                                                                            j < 4 ? 0x7FFF : 0x8000;
                        }
                    }
                }
                pSles->injectImpulse = 0;
            }
        } else if (pSles->testType == TEST_TYPE_BUFFER_PERIOD) {
            double twoPi = M_PI * 2;
            int maxShort = 32767;
            float amplitude = 0.8;
            short value;
            double phaseIncrement = pSles->frequency1 / pSles->sampleRate;
            bool isGlitchEnabled = false;
            for (unsigned i = 0; i < pSles->bufSizeInFrames; i++) {
                value = (short) (sin(pSles->bufferTestPhase1) * maxShort * amplitude);
                ((short *) buffer)[i] = value;

                pSles->bufferTestPhase1 += twoPi * phaseIncrement;
                // insert glitches if isGlitchEnabled == true, and insert it for every second
                if (isGlitchEnabled && (pSles->count % pSles->sampleRate == 0)) {
                    pSles->bufferTestPhase1 += twoPi * phaseIncrement;
                }

                pSles->count++;

                while (pSles->bufferTestPhase1 > twoPi) {
                    pSles->bufferTestPhase1 -= twoPi;
                }
            }
        }

        // Enqueue the filled buffer for playing
        result = (*(pSles->playerBufferQueue))->Enqueue(pSles->playerBufferQueue, buffer,
                                                        pSles->bufSizeInBytes);
        ASSERT_EQ(SL_RESULT_SUCCESS, result);

        // Update our model of the player queue
        assert(pSles->txFront <= pSles->txBufCount);
        assert(pSles->txRear <= pSles->txBufCount);
        SLuint32 txRearNext = pSles->txRear + 1;
        if (txRearNext > pSles->txBufCount) {
            txRearNext = 0;
        }
        assert(txRearNext != pSles->txFront);
        pSles->txBuffers[pSles->txRear] = buffer;
        pSles->txRear = txRearNext;

        pthread_mutex_unlock(&(pSles->mutex));
    } //pSles not null
}
Ejemplo n.º 3
0
// Read data from fifo2Buffer and store into pSamples.
int slesProcessNext(sles_data *pSles, double *pSamples, long maxSamples) {
    //int status = SLES_FAIL;

    SLES_PRINTF("slesProcessNext: pSles = %p, currentSample: %p,  maxSamples = %d",
                pSles, pSamples, maxSamples);

    int samplesRead = 0;

    int currentSample = 0;
    double *pCurrentSample = pSamples;
    int maxValue = 32768;

    if (pSles != NULL) {

        SLresult result;
        for (int i = 0; i < 10; i++) {
            usleep(100000);         // sleep for 0.1s
            if (pSles->fifo2Buffer != NULL) {
                for (;;) {
                    short buffer[pSles->bufSizeInFrames * pSles->channels];
                    ssize_t actual = audio_utils_fifo_read(&(pSles->fifo2), buffer,
                            pSles->bufSizeInFrames);
                    if (actual <= 0)
                        break;
                    {
                        for (int jj = 0; jj < actual && currentSample < maxSamples; jj++) {
                            *(pCurrentSample++) = ((double) buffer[jj]) / maxValue;
                            currentSample++;
                        }
                    }
                    samplesRead += actual;
                }
            }
            if (pSles->injectImpulse > 0) {
                if (pSles->injectImpulse <= 100) {
                    pSles->injectImpulse = -1;
                    write(1, "I", 1);
                } else {
                    if ((pSles->injectImpulse % 1000) < 100) {
                        write(1, "i", 1);
                    }
                    pSles->injectImpulse -= 100;
                }
            } else if (i == 9) {
                write(1, ".", 1);
            }
        }
        SLBufferQueueState playerBQState;
        result = (*(pSles->playerBufferQueue))->GetState(pSles->playerBufferQueue,
                  &playerBQState);
        ASSERT_EQ(SL_RESULT_SUCCESS, result);
        SLAndroidSimpleBufferQueueState recorderBQState;
        result = (*(pSles->recorderBufferQueue))->GetState(pSles->recorderBufferQueue,
                  &recorderBQState);
        ASSERT_EQ(SL_RESULT_SUCCESS, result);

        SLES_PRINTF("End of slesProcessNext: pSles = %p, samplesRead = %d, maxSamples = %d",
                    pSles, samplesRead, maxSamples);
    }
    return samplesRead;
}
int main(int argc, char **argv)
{
    size_t frameCount = 256;
    size_t maxFramesPerRead = 1;
    size_t maxFramesPerWrite = 1;
    int i;
    for (i = 1; i < argc; i++) {
        char *arg = argv[i];
        if (arg[0] != '-')
            break;
        switch (arg[1]) {
        case 'c':   // FIFO frame count
            frameCount = atoi(&arg[2]);
            break;
        case 'r':   // maximum frame count per read from FIFO
            maxFramesPerRead = atoi(&arg[2]);
            break;
        case 'w':   // maximum frame count per write to FIFO
            maxFramesPerWrite = atoi(&arg[2]);
            break;
        default:
            fprintf(stderr, "%s: unknown option %s\n", argv[0], arg);
            goto usage;
        }
    }

    if (argc - i != 2) {
usage:
        fprintf(stderr, "usage: %s [-c#] in.wav out.wav\n", argv[0]);
        return EXIT_FAILURE;
    }
    char *inputFile = argv[i];
    char *outputFile = argv[i+1];

    SF_INFO sfinfoin;
    memset(&sfinfoin, 0, sizeof(sfinfoin));
    SNDFILE *sfin = sf_open(inputFile, SFM_READ, &sfinfoin);
    if (sfin == NULL) {
        perror(inputFile);
        return EXIT_FAILURE;
    }
    // sf_readf_short() does conversion, so not strictly necessary to check the file format.
    // But I want to do "cmp" on input and output files afterwards,
    // and it is easier if they are all the same format.
    // Enforcing that everything is 16-bit is convenient for this.
    if ((sfinfoin.format & (SF_FORMAT_TYPEMASK | SF_FORMAT_SUBMASK)) !=
            (SF_FORMAT_WAV | SF_FORMAT_PCM_16)) {
        fprintf(stderr, "%s: unsupported format\n", inputFile);
        sf_close(sfin);
        return EXIT_FAILURE;
    }
    size_t frameSize = sizeof(short) * sfinfoin.channels;
    short *inputBuffer = new short[sfinfoin.frames * sfinfoin.channels];
    sf_count_t actualRead = sf_readf_short(sfin, inputBuffer, sfinfoin.frames);
    if (actualRead != sfinfoin.frames) {
        fprintf(stderr, "%s: unexpected EOF or error\n", inputFile);
        sf_close(sfin);
        return EXIT_FAILURE;
    }
    sf_close(sfin);

    short *outputBuffer = new short[sfinfoin.frames * sfinfoin.channels];
    size_t framesWritten = 0;
    size_t framesRead = 0;
    struct audio_utils_fifo fifo;
    short *fifoBuffer = new short[frameCount * sfinfoin.channels];
    audio_utils_fifo_init(&fifo, frameCount, frameSize, fifoBuffer);
    int fifoWriteCount = 0, fifoReadCount = 0;
    int fifoFillLevel = 0, minFillLevel = INT_MAX, maxFillLevel = INT_MIN;
    for (;;) {
        size_t framesToWrite = sfinfoin.frames - framesWritten;
        size_t framesToRead = sfinfoin.frames - framesRead;
        if (framesToWrite == 0 && framesToRead == 0) {
            break;
        }

        if (framesToWrite > maxFramesPerWrite) {
            framesToWrite = maxFramesPerWrite;
        }
        framesToWrite = rand() % (framesToWrite + 1);
        ssize_t actualWritten = audio_utils_fifo_write(&fifo,
                &inputBuffer[framesWritten * sfinfoin.channels], framesToWrite);
        if (actualWritten < 0 || (size_t) actualWritten > framesToWrite) {
            fprintf(stderr, "write to FIFO failed\n");
            break;
        }
        framesWritten += actualWritten;
        if (actualWritten > 0) {
            fifoWriteCount++;
        }
        fifoFillLevel += actualWritten;
        if (fifoFillLevel > maxFillLevel) {
            maxFillLevel = fifoFillLevel;
            if (maxFillLevel > (int) frameCount)
                abort();
        }

        if (framesToRead > maxFramesPerRead) {
            framesToRead = maxFramesPerRead;
        }
        framesToRead = rand() % (framesToRead + 1);
        ssize_t actualRead = audio_utils_fifo_read(&fifo,
                &outputBuffer[framesRead * sfinfoin.channels], framesToRead);
        if (actualRead < 0 || (size_t) actualRead > framesToRead) {
            fprintf(stderr, "read from FIFO failed\n");
            break;
        }
        framesRead += actualRead;
        if (actualRead > 0) {
            fifoReadCount++;
        }
        fifoFillLevel -= actualRead;
        if (fifoFillLevel < minFillLevel) {
            minFillLevel = fifoFillLevel;
            if (minFillLevel < 0)
                abort();
        }
    }
    printf("FIFO non-empty writes: %d, non-empty reads: %d\n", fifoWriteCount, fifoReadCount);
    printf("fill=%d, min=%d, max=%d\n", fifoFillLevel, minFillLevel, maxFillLevel);
    audio_utils_fifo_deinit(&fifo);
    delete[] fifoBuffer;

    SF_INFO sfinfoout;
    memset(&sfinfoout, 0, sizeof(sfinfoout));
    sfinfoout.samplerate = sfinfoin.samplerate;
    sfinfoout.channels = sfinfoin.channels;
    sfinfoout.format = sfinfoin.format;
    SNDFILE *sfout = sf_open(outputFile, SFM_WRITE, &sfinfoout);
    if (sfout == NULL) {
        perror(outputFile);
        return EXIT_FAILURE;
    }
    sf_count_t actualWritten = sf_writef_short(sfout, outputBuffer, framesRead);
    delete[] inputBuffer;
    delete[] outputBuffer;
    delete[] fifoBuffer;
    if (actualWritten != (sf_count_t) framesRead) {
        fprintf(stderr, "%s: unexpected error\n", outputFile);
        sf_close(sfout);
        return EXIT_FAILURE;
    }
    sf_close(sfout);
    return EXIT_SUCCESS;
}