Ejemplos de battery_read_info en C++ (Cpp)

Ejemplo n.º 1

Archivo: debug-coldfire.c Proyecto: Brandon7357/rockbox

bool dbg_ports(void)
{
    unsigned int gpio_out;
    unsigned int gpio1_out;
    unsigned int gpio_read;
    unsigned int gpio1_read;
    unsigned int gpio_function;
    unsigned int gpio1_function;
    unsigned int gpio_enable;
    unsigned int gpio1_enable;
    int adc_battery_voltage, adc_battery_level;
    int adc_buttons, adc_remote;
    int line;

    lcd_clear_display();
    lcd_setfont(FONT_SYSFIXED);

    while(1)
    {
        line = 0;
        gpio_read = GPIO_READ;
        gpio1_read = GPIO1_READ;
        gpio_out = GPIO_OUT;
        gpio1_out = GPIO1_OUT;
        gpio_function = GPIO_FUNCTION;
        gpio1_function = GPIO1_FUNCTION;
        gpio_enable = GPIO_ENABLE;
        gpio1_enable = GPIO1_ENABLE;

        lcd_putsf(0, line++, "GPIO_READ: %08x", gpio_read);
        lcd_putsf(0, line++, "GPIO_OUT:  %08x", gpio_out);
        lcd_putsf(0, line++, "GPIO_FUNC: %08x", gpio_function);
        lcd_putsf(0, line++, "GPIO_ENA:  %08x", gpio_enable);
        lcd_putsf(0, line++, "GPIO1_READ: %08x", gpio1_read);
        lcd_putsf(0, line++, "GPIO1_OUT:  %08x", gpio1_out);
        lcd_putsf(0, line++, "GPIO1_FUNC: %08x", gpio1_function);
        lcd_putsf(0, line++, "GPIO1_ENA:  %08x", gpio1_enable);

        adc_buttons = adc_read(ADC_BUTTONS);
        adc_remote  = adc_read(ADC_REMOTE);
        battery_read_info(&adc_battery_voltage, &adc_battery_level);
#if defined(IAUDIO_X5) ||  defined(IAUDIO_M5) || defined(IRIVER_H300_SERIES)
        lcd_putsf(0, line++, "ADC_BUTTONS (%c): %02x",
            button_scan_enabled() ? '+' : '-', adc_buttons);
#else
        lcd_putsf(0, line++, "ADC_BUTTONS: %02x", adc_buttons);
#endif
#if defined(IAUDIO_X5) || defined(IAUDIO_M5)
        lcd_putsf(0, line++, "ADC_REMOTE  (%c): %02x",
            remote_detect() ? '+' : '-', adc_remote);
#else
        lcd_putsf(0, line++, "ADC_REMOTE:  %02x", adc_remote);
#endif
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
        lcd_putsf(0, line++, "ADC_REMOTEDETECT: %02x",
                 adc_read(ADC_REMOTEDETECT));
#endif

        battery_read_info(&adc_battery_voltage, &adc_battery_level);
        lcd_putsf(0, line++, "Batt: %d.%03dV %d%%  ", adc_battery_voltage / 1000,
                 adc_battery_voltage % 1000, adc_battery_level);

#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
        lcd_putsf(0, line++, "remotetype: %d", remote_type());
#endif

        lcd_update();
        if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
        {
            lcd_setfont(FONT_UI);
            return false;
        }
    }
    return false;
}

Ejemplo n.º 2

bool dbg_ports(void)
{
    int adc_battery_voltage;
#ifndef HAVE_LCD_BITMAP
    int currval = 0;
    int button;
#else
    int adc_battery_level;

    lcd_setfont(FONT_SYSFIXED);
#endif
    lcd_clear_display();

    while(1)
    {
#ifdef HAVE_LCD_BITMAP
        lcd_putsf(0, 0, "PADR: %04x", (unsigned short)PADR);
        lcd_putsf(0, 1, "PBDR: %04x", (unsigned short)PBDR);

        lcd_putsf(0, 2, "AN0: %03x AN4: %03x", adc_read(0), adc_read(4));
        lcd_putsf(0, 3, "AN1: %03x AN5: %03x", adc_read(1), adc_read(5));
        lcd_putsf(0, 4, "AN2: %03x AN6: %03x", adc_read(2), adc_read(6));
        lcd_putsf(0, 5, "AN3: %03x AN7: %03x", adc_read(3), adc_read(7));

        battery_read_info(&adc_battery_voltage, &adc_battery_level);
        lcd_putsf(0, 6, "Batt: %d.%03dV %d%%  ", adc_battery_voltage / 1000,
                  adc_battery_voltage % 1000, adc_battery_level);

        lcd_update();

        while (button_get_w_tmo(HZ/10) != (DEBUG_CANCEL|BUTTON_REL));

        lcd_setfont(FONT_UI);

#else /* !HAVE_LCD_BITMAP */

        if (currval == 0) {
            lcd_putsf(0, 0, "PADR: %04x", (unsigned short)PADR);
        } else if (currval == 1) {
            lcd_putsf(0, 0, "PBDR: %04x", (unsigned short)PBDR);
        } else {
            int idx = currval - 2; /* idx < 7 */
            lcd_putsf(0, 0, "AN%d: %03x", idx, adc_read(idx));
        }

        battery_read_info(&adc_battery_voltage, NULL);
        lcd_putsf(0, 1, "Batt: %d.%03dV", adc_battery_voltage / 1000,
                  adc_battery_voltage % 1000);
        lcd_update();

        button = button_get_w_tmo(HZ/5);
        switch(button)
        {
        case BUTTON_STOP:
            return false;

        case BUTTON_LEFT:
            currval--;
            if(currval < 0)
                currval = 9;
            break;

        case BUTTON_RIGHT:
            currval++;
            if(currval > 9)
                currval = 0;
            break;
        }
#endif
    }
    return false;
}