void CSkinDialog::OnNcMouseMove(UINT nHitTest, CPoint point)
{
// TODO: Add your message handler code here and/or call default
// CXTPDialog::OnNcMouseMove(nHitTest, point);
if(nHitTest == HTCAPTION)// || (nHitTest!=HTCAPTION && m_nButtonMove>0))
{
int nHit = GetSysButtonsHitTest(point);
Rect rc, rc1;
if(m_nButtonMove!=nHit)
{
m_nButtonMove = nHit;
CRect rcWindow;
GetWindowRect(rcWindow);
Bitmap bmpBuf(rcWindow.Width(), rcWindow.Height());
Graphics graphics(&bmpBuf);
Graphics g(GetWindowDC()->GetSafeHdc());
// x
rc = nHit==HT_CLOSE?m_mapRect["NcBtnCloseOvr"]:m_mapRect["NcBtnClose"];
rc1.X = rcWindow.Width()-m_mapRect["NcBtnClosePos"].X;
rc1.Y = m_mapRect["NcBtnClosePos"].Y;
rc1.Width = rc.Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
// 口
if(GetStyle()&WS_MAXIMIZEBOX)
{
rc = nHit==HT_MAX?(IsZoomed()?m_mapRect["NcBtnResOvr"]:m_mapRect["NcBtnMaxOvr"]):(IsZoomed()?m_mapRect["NcBtnRes"]:m_mapRect["NcBtnMax"]);
rc1.X = rcWindow.Width()-m_mapRect["NcBtnMaxPos"].X;
rc1.Y = m_mapRect["NcBtnMaxPos"].Y;
rc1.Width = rc.Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
}
// -
if(GetStyle()&WS_MINIMIZEBOX)
{
rc = nHit==HT_MIN?m_mapRect["NcBtnMinOvr"]:m_mapRect["NcBtnMin"];
rc1.X = rcWindow.Width()-m_mapRect["NcBtnMinPos"].X;
rc1.Y = m_mapRect["NcBtnMinPos"].Y;
rc1.Width = rc.Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
}
g.DrawImage(&bmpBuf, 0, 0);
}
}
}
// 把DispTextBuf的内容输出到屏幕上去
// 对于属性相同的连续的字符，是以字符串而不是字符的形式TextOut的
int TextBufOut()
{
PAINTSTRUCT ps;
HDC hdc = BeginPaint(hMyWnd, &ps);
Graphics rgraphics(hdc);
SolidBrush brush(Color(255, 255, 255, 255));
FontFamily fontFamily(L"Courier New");
#ifdef _GDIP_
double WHscale=0.54112554; //Courier New字体的宽高比
#else
double WHscale=0.5;
#endif
Gdiplus::Font font(&fontFamily, (float)rect.bottom/TextSolutionY*0.882759, FontStyleBold, UnitPixel); //0.882759=font.GetSize()/font.GetHeight(0.0); 这是对应于Courier New字体的值。
SolidBrush CurBrush(Color(255, 255, 255, 255));
Bitmap bmpBuf(rect.right,rect.bottom); //双缓冲
Graphics graphics(&bmpBuf);
PointF pointF(0.0f, 0.0f);
float tempFX;
float CurX,CurY;
wchar_t ws[100];
int lao;
//////////////////////////////////////////////////////////////////////////
HFONT hFont;
hFont=CreateFont((float)rect.bottom/TextSolutionY,0,0,0,FW_MEDIUM,
FALSE,FALSE,FALSE,DEFAULT_CHARSET,
OUT_RASTER_PRECIS,CLIP_DEFAULT_PRECIS,
VARIABLE_PITCH|PROOF_QUALITY,FF_DONTCARE,"Lucida Console");
SelectObject(hdc,hFont);
//////////////////////////////////////////////////////////////////////////
//下面被注释掉的语句都是用GDI+时使用的。
//graphics.Clear(Color(0,0,0)); //清除原先的内容。
int pTextBufCur=0;
#ifdef _GDIP_
unsigned short Txt[80*25+1]={L"石维康"};
#else
char Txt[80*25+1]={"石维康"};
#endif
pointF.Y=0;
int j;
for (int i=0;i<TextSolutionY;i++)
{
int TxtLen=0;
int PTxtLen=0;
char CurCharAttr=DispTextBuf[i*(*TextSolutionX)*2+1]; //第一个字符的属性
pointF.X=0;
for (j=0;j<(*TextSolutionX);j++)
{
if (CurCharAttr!=DispTextBuf[pTextBufCur+1]) //遇到不同属性，要输出字符串了
//不在串开关的LowAscii将不得不输出，所以每遇到LowAscii都要重起一串
{
#ifdef _GDIP_
pointF.X=(float)(PTxtLen)*font.GetHeight(0.0)*WHscale;//(rect.right/(*TextSolutionX));
pointF.Y=font.GetHeight(0.0)*(i);
#else
GetCharWidthFloat(hdc,'A','A',&tempFX);
pointF.X+=(float)(PTxtLen)*16*tempFX;
#endif
PTxtLen=TxtLen;
#ifdef _GDIP_
brush.SetColor(AttrToColorP(CurCharAttr&0x0f),CurCharAttr&0x80);
graphics.DrawString(Txt,TxtLen,&font,pointF,&brush);
#else
SetTextColor(hdc,AttrToColor(CurCharAttr&0x0f,CurCharAttr&0x80));
SetBkColor(hdc,AttrToColor(((CurCharAttr&0xf0)>>4)&0x07,false)&0xffffff);
// if (Txt[0]>=0xa9 && Txt[0]<=0xdf) //只输出扩展Ascii里面的制表符。其实MyVM里应该有一个地方来设定是否可以输出中文
// OutHighAscii(hdc,&pointF.X,&pointF.Y,Txt,&TxtLen,(float)16*tempFX);
// if ((unsigned char)Txt[0]<0x20 && Txt[0]!=0x00) //输出箭头和心形等
// {
// lao=OutLowAscii(hdc,&pointF.X,&pointF.Y,(unsigned char *)Txt,&TxtLen,(float)16*tempFX);
// //pTextBufCur+=lao*2;
// }
// else
// lao=0;
MultiByteToWideChar(437,0,Txt,TxtLen,ws,100);
TextOutW(hdc,pointF.X,pointF.Y,ws,TxtLen);
#endif
TxtLen=0;
CurCharAttr=DispTextBuf[pTextBufCur+1];
}
//else //遇到相同属性，把它加到Txt后面就可以了
{
#ifdef _GDIP_
if (DispTextBuf[pTextBufCur+1]>0 && DispTextBuf[pTextBufCur+1]<0x80) //ASCII码
#endif
{
Txt[TxtLen]=DispTextBuf[pTextBufCur];
Txt[++TxtLen]=0;
pTextBufCur+=2;
}
#ifdef _GDIP_
else //Unicode字符
{
Txt[TxtLen]=(unsigned char)DispTextBuf[pTextBufCur];
Txt[TxtLen]<<=8;
pTextBufCur+=2;
j++;
Txt[TxtLen]+=(unsigned char)DispTextBuf[pTextBufCur];
Txt[++TxtLen]=0;
pTextBufCur+=2;
}
#endif
}
}
#ifdef _GDIP_
pointF.X=(float)(j-TxtLen)*font.GetHeight(0.0)*WHscale;
pointF.Y=font.GetHeight(0.0)*(i);
#else
GetCharWidthFloat(hdc,'A','A',&tempFX);
pointF.X=(float)(j-TxtLen)*16*tempFX;
#endif
#ifdef _GDIP_
brush.SetColor(AttrToColorP(CurCharAttr&0x0f,CurCharAttr&0x80));
graphics.DrawString(Txt,TxtLen,&font,pointF,&brush);
#else
SetTextColor(hdc,AttrToColor(CurCharAttr&0x0f,CurCharAttr&0x80));
SetBkColor(hdc,AttrToColor(((CurCharAttr&0xf0)>>4)&0x07,false)&0xffffff);
// if (Txt[0]>=0xa9 && Txt[0]<=0xdf) //只输出扩展Ascii里面的制表符。其实MyVM里应该有一个地方来设定是否可以输出中文
// OutHighAscii(hdc,&pointF.X,&pointF.Y,Txt,&TxtLen,(float)16*tempFX);
// if ((unsigned char)Txt[0]<0x20 && Txt[0]!=0x00) //输出箭头和心形等
// {
// lao=OutLowAscii(hdc,&pointF.X,&pointF.Y,(unsigned char *)Txt,&TxtLen,(float)16*tempFX);
// //pTextBufCur+=lao*2;
// }
// else
// lao=0;
MultiByteToWideChar(437,0,Txt,TxtLen,ws,100);
TextOutW(hdc,pointF.X,pointF.Y,ws,TxtLen);
pointF.Y+=(int)font.GetHeight(0.0); //pointF.Y是浮点，TextOut的参数是整形，浮点误差的积累会产生黑线
#endif
}
void CSkinDialog::OnNcPaint()
{
// TODO: Add your message handler code here
if(!CImgSkin::IsLoaded())
{
CXTPDialog::OnNcPaint();
return;
}
if(HasStyle(WS_CHILD))
{
return;
}
/*
RECT ClientRect;
GetClientRect(&ClientRect);
OffsetRect(&ClientRect, 100, 100);
ExcludeClipRect(GetWindowDC()->GetSafeHdc(), ClientRect.left, ClientRect.top,
ClientRect.right, ClientRect.bottom);
*/
CRect rcWindow;
GetWindowRect(&rcWindow);
Bitmap bmpBuf(rcWindow.Width(), rcWindow.Height());
Graphics graphics(&bmpBuf);
Graphics g(GetWindowDC()->GetSafeHdc());
Rect rc, rc1;
// Title Left
rc = m_bActive?m_mapRect["TitleLeftActive"]:m_mapRect["TitleLeft"];
rc1.X = 0;
rc1.Y = 0;
rc1.Width = rc.Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
// Title Center
rc = m_bActive?m_mapRect["TitleCenterActive"]:m_mapRect["TitleCenter"];
rc1.X = m_mapRect["TitleLeftActive"].Width;
rc1.Y = 0;
rc1.Width = rcWindow.Width()-m_mapRect["TitleLeftActive"].Width-m_mapRect["TitleRightActive"].Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
// Title Right
rc = m_bActive?m_mapRect["TitleRightActive"]:m_mapRect["TitleRight"];
rc1.X = rc1.GetRight();
rc1.Y = 0;
rc1.Width = rc.Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
// Border Left
rc = m_bActive?m_mapRect["BorderLeftActive"]:m_mapRect["BorderLeft"];
rc1.X = 0;
rc1.Y = m_mapRect["TitleLeftActive"].Height;
rc1.Width = rc.Width;
rc1.Height = rcWindow.Height()-m_mapRect["TitleLeftActive"].Height-m_mapRect["BorderBotActive"].Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
// Border Bottom
rc = m_bActive?m_mapRect["BorderBotActive"]:m_mapRect["BorderBot"];
rc1.X = 0;
rc1.Y = rcWindow.Height()-rc.Height-1;
rc1.Width = rcWindow.Width();
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
// Border Right
rc = m_bActive?m_mapRect["BorderRightActive"]:m_mapRect["BorderRight"];
rc1.X = rcWindow.Width()-rc.Width-1;
rc1.Y = m_mapRect["TitleLeftActive"].Height;
rc1.Width = rc.Width;
rc1.Height = rcWindow.Height()-m_mapRect["TitleLeftActive"].Height-m_mapRect["BorderBotActive"].Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
// Close Button
rc = m_nButtonDown==HT_CLOSE?m_mapRect["NcBtnCloseDown"]:m_mapRect["NcBtnClose"];
rc1.X = rcWindow.Width()-m_mapRect["NcBtnClosePos"].X;
rc1.Y = m_mapRect["NcBtnClosePos"].Y;
rc1.Width = rc.Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
// Max Button
if(GetStyle()&WS_MAXIMIZEBOX)
{
rc = IsZoomed()?(m_nButtonDown==HT_MAX?m_mapRect["NcBtnResDown"]:m_mapRect["NcBtnRes"]):(m_nButtonDown==HT_MAX?m_mapRect["NcBtnMaxDown"]:m_mapRect["NcBtnMax"]);
rc1.X = rcWindow.Width()-m_mapRect["NcBtnMaxPos"].X;
rc1.Y = m_mapRect["NcBtnMaxPos"].Y;
rc1.Width = rc.Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
}
// Min Button
if(GetStyle()&WS_MINIMIZEBOX)
{
rc = m_nButtonDown==HT_MIN?m_mapRect["NcBtnMinDown"]:m_mapRect["NcBtnMin"];
rc1.X = rcWindow.Width()-m_mapRect["NcBtnMinPos"].X;
rc1.Y = m_mapRect["NcBtnMinPos"].Y;
rc1.Width = rc.Width;
rc1.Height = rc.Height;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width, rc.Height, UnitPixel);
}
Font myFont(L"宋体", 9);
Color col(255,0,0,0);
col.SetFromCOLORREF(m_mapColor["Caption"]);
SolidBrush blackBrush(col);
StringFormat format;
format.SetAlignment(StringAlignmentNear);
RectF layoutRect(::GetSystemMetrics(SM_CYICON)+m_mapRect["TitleTextStart"].X, m_mapRect["TitleTextStart"].Y, rcWindow.Width(), rcWindow.Height());
WCHAR string[MAX_PATH] = {0};
CString str;
GetWindowText(str);
MultiByteToWideChar( CP_ACP, 0, str, -1, string, MAX_PATH) ;
graphics.DrawString(string, -1, &myFont, layoutRect, &format, &blackBrush);
g.DrawImage(&bmpBuf, 0, 0);
// Do not call CXTPDialog::OnNcPaint() for painting messages
}
void CSkinDialog::OnPaint()
{
CPaintDC dc(this); // device context for painting
// TODO: Add your message handler code here
if(!CImgSkin::IsLoaded())
{
CXTPDialog::OnPaint();
return;
}
Rect rc, rc1;
CRect rcWindow;
GetClientRect(&rcWindow);
Bitmap bmpBuf(rcWindow.Width(), rcWindow.Height());
Graphics graphics(&bmpBuf);
Graphics g(dc.GetSafeHdc());
// dialog frame
//if(!HasStyle(WS_CHILD))
// DrawFrame(g);
rc = m_mapRect["Background"];
// Top
rc1.X = rcWindow.left;
rc1.Y = rcWindow.top;
rc1.Width = rc.Width/3;
rc1.Height = rc.Height/3;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop(), rc.Width/3, rc.Height/3, UnitPixel);
rc1.X = rcWindow.left+rc.Width/3;
rc1.Width = rcWindow.Width()-rc.Width/3*2;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft()+rc.Width/3, rc.GetTop(), rc.Width/3, rc.Height/3, UnitPixel);
rc1.X = rcWindow.right-rc.Width/3;
rc1.Width = rc.Width/3;
graphics.DrawImage(m_pImg, rc1, rc.GetRight()-rc.Width/3, rc.GetTop(), rc.Width/3, rc.Height/3, UnitPixel);
//Center
rc1.X = rcWindow.left;
rc1.Y = rcWindow.top+rc.Height/3;
rc1.Width = rc.Width/3;
rc1.Height = rcWindow.bottom-rc.Height/3*2;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetTop()+rc.Height/3, rc.Width/3, rc.Height/3, UnitPixel);
rc1.X = rcWindow.left+rc.Width/3;
rc1.Width = rcWindow.Width()-rc.Width/3*2;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft()+rc.Width/3, rc.GetTop()+rc.Height/3, rc.Width/3, rc.Height/3, UnitPixel);
rc1.X = rcWindow.right-rc.Width/3;
rc1.Width = rc.Width/3;
graphics.DrawImage(m_pImg, rc1, rc.GetRight()-rc.Width/3, rc.GetTop()+rc.Height/3, rc.Width/3, rc.Height/3, UnitPixel);
//Bottom
rc1.X = rcWindow.left;
rc1.Y = rcWindow.bottom-rc.Height/3;
rc1.Width = rc.Width/3;
rc1.Height = rc.Height/3;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft(), rc.GetBottom()-rc.Height/3, rc.Width/3, rc.Height/3, UnitPixel);
rc1.X = rcWindow.left+rc.Width/3;
rc1.Width = rcWindow.right-rc.Width/3*2;
graphics.DrawImage(m_pImg, rc1, rc.GetLeft()+rc.Width/3, rc.GetBottom()-rc.Height/3, rc.Width/3, rc.Height/3, UnitPixel);
rc1.X = rcWindow.right-rc.Width/3;
rc1.Width = rc.Width/3;
graphics.DrawImage(m_pImg, rc1, rc.GetRight()-rc.Width/3, rc.GetBottom()-rc.Height/3, rc.Width/3, rc.Height/3, UnitPixel);
g.DrawImage(&bmpBuf, 0, 0);
// Do not call CXTPDialog::OnPaint() for painting messages
}
